Académique Documents
Professionnel Documents
Culture Documents
1.Use mesh analysis to determine the three mesh currents in the circuits of given figure
2.Solve the mesh and branch currents shown in figure
3.In the circuit obtain the load current and power delivered to the load.
4.Determine the current supplied by each battery in the circuit shown in the figure
5.Using nodal analysis, obtain the current flowing in all the resistors of the circuits shown in
figure.
6.Calculate the voltage across the 15 ohm resistor in the network shown in figure below
using nodal analysis
7.Using nodal method find current through 8 ohm resistor.
8.Use nodal analysis to determine the voltage across 5 ohm resistance and the current in the
12 V source.
9.Solve for current through 5 ohm resistor by principle of super position theorem
10. Using super position theorem , find the current IL and the power consumed by 23 ohm
resistor in the circuit shown in figure
11.Find the thevenins voltage and thevenins resistance for the circuit of fig across ab.
12.Determine the power loss in 10 ohm resistor using thevenins theorem.
13.For the circuit shown in fig. find the current through the 30 ohm load resistor Nortons
theorem
14.Obtain Nortons equivalent circuits across terminals A & B for network shown in fig.
15.calculate the value of RL . so that maximum power is transferred from battery.
16. Find the value of RL . so that maximum power is delivered to the load resistance RL
Model 2
Unit-ii
Unit-3
1What are the types of armature windings available in DC machines
2.What is the purpose of commutator in a Dc generator
3.what are the different types Dc generator
4.What are the applications of Dc motors
5.Mention the applications of synchronous motors
6. Differentiate salient pole rotor & smooth cylindrical type synchronous machine
Unit-4
1. Differentiate between intrinsic semiconductor and extrinsic semiconductor
2. Mention some applications of zener diode.
3.Draw the V-I characteristics of zener diode.
4.What are the applications of PN junction diode
5.What is meant by avalance breakdown.
6.What are the different configuration of BJT.
Unit-5