Académique Documents
Professionnel Documents
Culture Documents
Engine
ECM
Main pump Pilot pump
Pump power
shift EPPR
Emergency
warning lamp
Cluster
CAN #1
Emergency
CN-16B
Overheat warning signal Accel dial signal CN-16A CN-16
CAN #2 Normal
Hydraulic temperature
warning lamp
130ZF5MS09
1. If the engine coolant temperature or the hydraulic oil temperature is overheated over set
temperature, the warning lamp is ON and the pump input torque or the engine speed is reduced as
below logic table.
2. LOGIC TABLE
Description Condition Function
- Coolant temperature :
- Warning lamp : Pops up and buzzer
Above 103˚C
Activated sounds.
- Hydraulic oil temperature :
- Pump input torque is reduced.
First step Above 100˚C
warning - Coolant temperature :
Less than 100˚C - Return to pre-set the pump absorption
Canceled
- Hydraulic oil temperature : torque.
Less than 95˚C
- Emergency warning lamp pops up on the
- Coolant temperature : Above 107˚C
Activated center of LCD and the buzzer sounds.
- Hydraulic oil temperature : Above 105˚C
- Engine speed is reduced after 10 seconds.
Second step
warning - Coolant temperature :
- Return to pre-set the engine speed.
Less than 103˚C
Canceled - Hold pump absorption torque on the first
- Hydraulic oil temperature :
step warning.
Less than 100˚C
5-10