Académique Documents
Professionnel Documents
Culture Documents
Tech/EE/T/2/94/2011
8. Explain with diagram the principle of Arc Welding. Name the B ACHELOR OF M ECHANICAL E NGINEERING
different methods of electric welding processes. 5+5=10 E XAMINATION, 2011
9. Explain induction heating process and discuss its advantages. ( 1st Year, 2nd Semester )
12. Write short notes on a) Capacitor start induction run motor b) PART - I
13. A small Arc furnace is to operate at 440V AC, 50Hz supply. Find two marks for organized answer
out the arc resistance if the inductor of the reactor in the furnace 1. a) Mention Clearly the functions of following equipments in
consumes 400W. 10 thermal power plant- 9
v) Condenser
[ Turn over
[2] [3]
2. a) ‘Sometimes Load Duration Curve is more effective than 4. a) Explain RADIAL, RING MAIN & INTERCONNECTED
Load Curve’ – Justify with clear definition of Load Curve & system of AC Distribution with advantages & disadvantages
Load duration curve. 6 from each other. 11
b) A Generating Station has the following daily load schedule b) “The amount of light reaching on a surface (Illuminance) is
more important than the light coming out of the light source”
Time (hours) (0-6) (6-10) (10-12) (12-16) (16-20) (20-24)
– Justify. 2
Load (MW) 80 90 90 70 140 65
c) Which motor is best suitable for Traction System. 3
Find out - (i) Maximum Demand 10
5. a) Draw the Schematic diagram of distribution of Unit Auxiliary
(ii) Energy generated per day
Power from a generator to the Unit Bus. Hence explain the
(iii) Average Load Interlocking arrangements with Station Bus. 10
(iv) Load Factor b) What is Ferranti Effect of long & lightly loaded transmission
Draw the Load curve from the above data. Hence draw the line ? Explain it with phasor diagram. 6
[ Turn over