Vous êtes sur la page 1sur 3

NPTEL – ADVANCED FOUNDATION ENGINEERING-I

REFERENCES

Ahlvin, R. G., and Ulery, H. H. (1962). “Tabulated Values of Determining the Composite
Pattern of Stresses, Strains, and Deflections Beneath a Uniform Load on a Homogeneous
Half Space,” Highway Research Board Bulletin 342, pp. 1-13.

American Society for Testing and Materials (1982). Annual Book of ASTM Standards,
Part 19, Philadelphia.

Binquet, J., and Lee, K. L. (1975a). “Bearing Capacity Tests on Reinforced Earth Mass,”
Journal of the Geotechnical Engineering Division, American Society of Civil Engineers,
Vol. 101, No. GT12, PP. 1241-1255.

Binquet, J., and Lee, K. L. (1975b) “Bearing Capacity Analysis of Reinforced Earth
Slabs,” Journal of the Geotechnical Engineering Division, American Society of Civil
Engineers, Vol. 101, No. GT12, PP. 1257-1276.

Bjerrum, L. (1963). “Allowable Settlement of Structures,” Proceedings, European


Conference on Soil Mechanics and Foundation Engineering, Wiesbaden, Germany, Vol.
III, pp. 135-137.

Boussinesq, J. (1883). Application des Potentials a L’Etude de L’Equilibre et du


Mouvement des Solides Elastiques, Gauthier-Villars, Paris.

Bowles, J. E. (1977). Foundation Analysis and Design, 2nd, ed., McGraw-Hill, New
York.

Burland, J. B., and Worth, C. P. (1974). “Allowable and Differential Settlement of


Structures Including Damage and Soil-Structures Interaction,” Proceedings, Conference
on Settlement of Structures, Cambridge University, England, pp. 611-654.

Christian, J. T., and Carrier, W. D. (1978) “Janbu, Bjerrum and Kjaernsli’s Chart
Reinterpreted,” Canadian Geotechnical Journal, Vol. 15, pp. 124-128.

D’Appolonia, D. J., D’Appolonia, E., and Brissettee, R. F. (1970). “Settlement of Spread


Footings on Sand: Closure,” Journal of the Soil Mechanics and Foundation Engineering
Division, ASCE, Vol. 96, No. 2, pp. 754-762.

Das, B. M. (1981). “Bearing Capacity of Eccentrically Loaded Surface Footings on


Sand,” Soils and Foundations, Vol. 21, No. 1, pp. 115-119.

Das, B. (1997). Advanced Soil Mechanics, 2nd ed., Taylor and Francis, Washington, D. C.

Grant, R. J., Christian, J. T., and Vanmarcke, E. H. (1974. “Differential Settlement of


Buildings,” Journal of the Geotechnical Engineering Division, American Society of Civil
Engineers, Vol. 100, No. GT9, pp. 973-991.
NPTEL – ADVANCED FOUNDATION ENGINEERING-I

Griffiths, D. V. (1984). “A Chart for Estimating the Average Vertical Stress Increase in
an Elastic Foundation Below a Uniformly Loaded Rectangular Area,” Canadian
Geotechnical Journal, Vol. 21, No. 4, 710-713.

Harr, M. E. (1966). Fundamentals of Theoretical Soil Mechanics, McGraw-Hill, New


York.

Housel, W. S. (1929). “A Practical Method for the Selection of Foundations Based on


Fundamental Research in Soil Mechanics,” Research Bulletin No. 13, University of
Michigan, Ann Arbor.

Janbu, N., Bjerrum, L., and Kjaernsli, B. (1956). “Veiledning ved losning av
fundamentering-soppgaver,” Publication No. 16, Norwegian Geotechnical Institute, pp.
30-32.

Liao, S. S. C., and Whitman, R. V. (1986). “Overburden Correction Factors for SPT in
Sand,” Journal of Geotechnical Engineering, American Society of Civil Engineers, Vol.
112, No. 3, pp. 373-377.

Mandel, J., and Salencon, J. (1972). “Force portante d’un sol sur une assise rigide (etude
theorizue),” Geotechnique, Vol. 22, No. 1, pp. 79-93.

Mayerhof, G. G. (1956). “Penetration Tests and Bearing Capacity of Cohesionless Soils,”


Journal of the Soil Mechanics and Foundations Division, American Society of Civil
Engineers, Vol. 82, No. SM1, pp. 1-19.

Mayerhof, G. G. (1965). “Shallow Foundations,” Journal of the Soil Mechanics and


Foundations Division, American Society of Civil Engineers, Vol. 91, No. SM2, pp. 21-
31.

Meyehof, G. G. (1974). “Ultimate Bearing Capacity of Footings on Sand Layer


Overlying Clay,” Canadian Geotechnical Journal, Vol. 11, No. 2, pp. 223-229.

Mitchell, J. K., and Gardner, W. S. (1975). “In Situ Measurement of Volume Change
Characteristics,” Proceedings, Specialty Conference, American Society of Civil
Engineers, Vol. 2, pp. 279-345.

Newmark, N. M. (1935). : Simplified Computation of Vertical Pressure in Elastic


Foundation,” Circular 24, University of Illinois Engineering Experiment Station, Urbana.

Newmark, N. M. (1942). : Influence Charts for Computation of Stresses in Elastic


Foundation,” Bulletin No. 338, University of Illinois Engineering Experiment Station,
Urbana.

Osterberg, J. O. (1957). “Influence Values for Vertical Stresses in Semi-Infinite Mass


Due to Embankment Loading,” Proceedings, Fourth International Conference on Soil
Mechanics and Foundation Engineering, London, Vol. 1, pp. 393-396.
NPTEL – ADVANCED FOUNDATION ENGINEERING-I

Pfeifle, T. W., and Das, B. M. (1979). “Bearing Capacity of Surface Footings on Sand
Layer Resting on a Rigid Rough Base,” Soil and Foundations, Vol. 19, No. 1, pp. 1-11.

Polshin, D. E., and Tokar, R. A. (1957). “Maximum Allowable Nonuniform Settlement


of Structures,” Proceedings, Fourth International Conference on Soil Mechanics and
Foundation Engineering, London, Vol. 1, pp. 402-405.

Schertmann, J. H. (1970). “Static Cone to Compute Settlement Over Sand,” Journal of


the Soil Mechanics and Foundations Division, American Society of Civil Engineers, Vol.
96, No. SM3, pp. 1011-1043.

Schmertmann, J. H. (1978). Guidelines for Cone Penetrations: Performance and Design,


FHWA TS-78-209, U. S. Department of Transportation, Washington, D. C.

Schmertmann, J. H., and Hartman, J. P. (1978). “Improved Strain Influence Factor


Diagrams,” Journal of the Geotechnical Engineering Division, American Society of Civil
Engineers, Vol. 104, No. GT8, pp. 1131-1135.

Schnabel, J. J. (1972). “Foundation Construction on Compacted Structural Fill in the


Washington, D. C., Area,” Proceedings, Specialty Conference on Performance of Earth
and Earth Supported Structures, American Society of Civil Engineers, Vol. 1, Part 2, pp.
1019-1036.

Skempton, A. W., and Bjerrum, L. (1957). “A Contribution to Settlement Analysis of


Foundations in Clay,” Geotechique, London, Vol. 7, p. 178.

Steinbrenner, W. (1934). “Tafeln zur Setzungsberechnung,” Die Strasse, Vol. 1, pp. 121-
124.

Terzaghi, K., and Peck, R. B. (1967). Soil Mechanics in Engineering Practice, 2nd, ed.,
Wiley New York.

Wahls, H. E. (1981). “Tolerable Settlement of Buildings,” Journal of the Geotechnical


Engineering Division, American Society of Civil Engineers, Vol. 107, No. GT11, pp.
1489-1504.

Vous aimerez peut-être aussi