Académique Documents
Professionnel Documents
Culture Documents
Ulticampyv2
From Ulticampy
español • English • italiano • français • português • ﺍﻟﻌﺮﺑﻴﺔ • български • català • čeština • Deutsch • Ελληνικά • ﻓﺎﺭﺳﯽ • hrvatski • magyar • română • 日本語 • 한국어 • lietuvių •
Nederlands • norsk bokmål • polski •
русский • Türkçe • українська • 中文(中国大陆)
• 中文(台灣)
• עברית •
Content
1 Ulticampy V2
1.1 Introduction
1.2 Version 2
1.3 Videos
1.3.1 Assembly film
1.3.2 Other videos
1.4 Gallery
2 Technical Documents
3 Materials
3.1 Structure
3.2 Printed Parts
3.3 Materials
3.4 Electronics
3.5 Rods
3.6 Engines
3.7 Wiring
3.8 Tornilleria
3.9 Frimware
4 changes and major changes
Ulticampy V2
Introduction
An inexpensive 3D printer to build and much more robust and reliable than Prusa Mendel and models can also choose to close it completely, reducing noise and keeping the
heat inside.
His aesthetic is very clean thanks to the nuts are embedded inside the panels giving it a very commercial look and clean
Print speeds are far superior to that of any Prusa Mendel or
It can be mounted on single or double estrusor estrusor version, the system push filament is bowden with which saved weight on the shaft and 6mm can use guides to
enhance printing speed flawless.
The ulticampy selfleveling system uses the Zaxis implemented in the latest version of frimware marlin, which saves us the continuous calibration limit the Z axis
The brass fittings for sliding the X and Y have no maintenance, thus improving reliability and maintenance compared to linear bearings
Version 2
Second version of the 3D printer ulticampy 2, the essence and design remains but grows a few inches, so we expanded the printing surface until: X 225mm / 235mm Y / Z
195mm
Improvements over Version 1
Larger print
Redesign 90% of printed pieces
Redesign of the central carriage downsizing
Integration of a C14 connector 220v with switch
Integration of a USB connector screwed
Integration of the LCD display on the front
Reinforcing the impression tray to prevent vibration
Integration of the power supply under the printer
Integration of ramps and Arduino board under the printer
Countersink panels for improved aesthetics
Base print added to the top panel, to better exploit the material
Videos
Assembly film
http://ulticampy.synology.me/MediaWiki/index.php?title=Ulticampyv2 1/11
4/1/2015 Ulticampyv2 Ulticampy
Other videos
Gallery
http://ulticampy.synology.me/MediaWiki/index.php?title=Ulticampyv2 2/11
4/1/2015 Ulticampyv2 Ulticampy
Technical Documents
Image Name Archive Description
Complete
Manual with
project
breakdown of
Full Manual
components
Project +
Download (http://ulticampy.synology.me/MediaWiki/images/3/3e/Manual.pdf) and dimension
Dimension
drawings of al
drawings
components *
Thanks are
added to
Dracnas forero
Full
breakdown of
fasteners
Breakdown
required for
of fasteners
components
+ Download (http://ulticampy.synology.me/MediaWiki/images/0/01/Tornilleriaulticampy.pdf)
and dimension
dimensioned
drawings of
drawings
the same *
Thanks to
forero Dracna
Calculations
Calculation and motion
of resolution for
Download
movement A4988 driver
(http://ulticampy.synology.me/MediaWiki/images/4/4d/CALCULO_DE_LA_RESOLUCI%C3%93N_DEL_MOVIMIENTO.pdf)
and and DRV8825
resolution * Thanks to
Dracnas forero
OBJ file with
OBJ file
the complete
complete Download (http://ulticampy.synology.me/MediaWiki/images/1/1f/Ulticampyobj.rar)
3D printer
printer
design
Materials
Structure
http://ulticampy.synology.me/MediaWiki/index.php?title=Ulticampyv2 3/11
4/1/2015 Ulticampyv2 Ulticampy
Plans for machining the recommended panel
Panels thickness 6mm (Base 10mm print) Format for Corel
Download
CDR 10 Units Draw Vector * Updated 02/01/2015 (Corrected
(http://www.ulticampy.synology.me/ulticampy2/paneles/CDR.rar)
format coordinates of the right pane + Fixed hole for the
C14)
Plans for machining the recommended panel
Panels thickness 6mm (Base 10mm print) format for
Download
DWG 10 Units Autocad Vectors * Updated 02/01/2015 (Corrected
(http://www.ulticampy.synology.me/ulticampy2/paneles/DWG.rar)
format coordinates of the right pane + Fixed hole for the
C14)
Plans for machining the recommended 6mm thick
STL format Download
10 Units panels (Base 10mm print) Format for Generic 3D
panels (http://www.ulticampy.synology.me/ulticampy2/paneles/STL.rar)
format 3D programs
Printed pieces
Image Name Archive
Printed pieces (FIX 5 03/06/2015) Download (http://www.ulticampy.synology.me/ulticampy2/Ulticampy2stl.rar)
Download
SKP printed pieces (REVISION 4 02.17.2015)
(http://ulticampy.synology.me/MediaWiki/images/c/c0/Piezas_impresas_SKP.rar)
Download
(http://ulticampy.synology.me/MediaWiki/images/b/b7/Soporte_motor_extrusor.STL)
Extruder Motor Support V3 (NeoxM3) Extruder Motor Support V32 || Download V2
(http://ulticampy.synology.me/MediaWiki/images/e/e3/Soporte_motor_extrusor_v2.STL)
Download
(http://ulticampy.synology.me/MediaWiki/images/2/24/Neoxm3_carroXY_V2_6mm.STL)
Shopping XY screwless (central shopping 6mm) (NeoxM3)
Shopping center 8mm Version || Download 8mm
(http://ulticampy.synology.me/MediaWiki/images/8/80/Neoxm3_carroXY_V2_8mm.STL)
http://ulticampy.synology.me/MediaWiki/index.php?title=Ulticampyv2 4/11
4/1/2015 Ulticampyv2 Ulticampy
001 botonkill
002 carcasalcddel
003 carcasalcdtras
004 Central trolley E3DV6
Side 005_Carros
006_idlermk4.png
007_Infill_3D_Bowden_Extruder_Direct_Mount_13.5_MK3
008_RAMPS_Fan_Mount
009_soportecables
http://ulticampy.synology.me/MediaWiki/index.php?title=Ulticampyv2 5/11
4/1/2015 Ulticampyv2 Ulticampy
010_soporteendstopX
011_soporteendstopY
012_soporteendstopz_ (repaired)
013_soportemotor_ (repaired)
014_soporteVarillas_Z
015_Tapas side Carros
016_ventiladorcapa_ (repaired)
Materials
Image Name Quantity Description
http://ulticampy.synology.me/MediaWiki/index.php?title=Ulticampyv2 6/11
4/1/2015 Ulticampyv2 Ulticampy
Caps for sliding the side carriages Measures are 8mm inner diameter, outer diameter 11mm, 22mm Overall
Bronze bushings 4 Units
length
http://ulticampy.synology.me/MediaWiki/index.php?title=Ulticampyv2 7/11
4/1/2015 Ulticampyv2 Ulticampy
Wheel push filament
1 Unit Sprocket for pushing the filament type MK8
MK8
Electronics
Image Name Quantity Description
Warm bed 250mm X
1 Unit Bed silicone to put under the printing table 12V
http://ulticampy.synology.me/MediaWiki/index.php?title=Ulticampyv2 8/11
4/1/2015 Ulticampyv2 Ulticampy
250mm silicon
Rods
Image Name Quantity Description
Engines
http://ulticampy.synology.me/MediaWiki/index.php?title=Ulticampyv2 9/11
4/1/2015 Ulticampyv2 Ulticampy
Cabling
Image Name Quantity Description
MaleFemale USB
1 Unit USB Adapter MaleFemale Extension connecting printer to pull the connector at the rear of the printer
Extension
Tornilleria
Quantity Screw type
16 Metrica washer 3mm
60 Nut Metric 3mm
4 Selflocking nut 3mm Metrica
Three Screws M3 x 12mm
30 Screws M3 x 30mm
8 Screws M3 x 25mm
12 Screws M3 x 18mm
Three Screws M3 x 35mm
One Screws M3 x 20mm
35 Countersunk screws M3 x 16mm
2 Countersunk screws M3 x 12mm
6 Countersunk screws M3 x 18mm
2 Dock 8mm long
4 Screw 4 X 10mm
Frimware
http://ulticampy.synology.me/MediaWiki/index.php?title=Ulticampyv2 10/11
4/1/2015 Ulticampyv2 Ulticampy
Frimware Marlin 1.02 Frimware configured with Autolevel
Download RAR
V2 + by servo (Updated 18/03/2015 Added the function
(http://ulticampy.synology.me/MediaWiki/images/4/40/Ulticampy%2Bhyst.rar)
Hysteresis of hysteresis to correct circles)
Changes and major changes
06/02/2015 Accelerations are modified frimware 1.0.2 marlin is far more difficult than banding appears in parts though we print faster
06/02/2015 Supports the Z axis rods are replaced, are now more aesthetic and somewhat smaller dimensions to accommodate the passage of rods and screws are
ground m3
06/02/2015 Engine supports X and Y are replaced by a lighter and aesthetic to new heights allowing m3 screws slide to avoid having to thread them
03/02/2015 The frimware to the latest version 1.0.2 is updated marlin
17/02/2015 The central carriage comptatible e3dv6 is amended to decrease material and round the edges is now more aesthetic and prints faster
17/02/2015 Cars side by a reversible version was modified to facilitate assembly
Retrieved from " http://ulticampy.synology.me/MediaWiki/index.php?title=Ulticampyv2&oldid=285 »
This page was last modified on 18 Mar 2015, at 02:40.
This page has been visited 7431 times.
Content is available under Creative Commons Attribution ShareAlike unless otherwise indicated.
http://ulticampy.synology.me/MediaWiki/index.php?title=Ulticampyv2 11/11