Vous êtes sur la page 1sur 1

A road camber is defined by the varying differences in heights of the road.

As can be seen in the


diagram, the crown represents the highest point at the centre line of the road. From the crown the
road slopes down either side to aid in water

drainage.

Crown is shaped hill road. has peaks and road base, raising and decreasing. usually found in the
mountains

A culvert is a structure that allows water to flow under a road, railroad, trail, or similar obstruction
from one side to the other side. Usually surrounded by soil. A culvert may be made from a pipe,
reinforced concrete or other material.

A curb or kerb, is the edge where a raised sidewalk or road median/central reservation meets a
street or other roadway.

Macadam is a type of road construction pioneered by Scottish engineer John Loudon McAdam
around 1820. The method simplified what had been considered state of the art at that point. Single-
sized aggregate layers of small stones, with a coating of binder as a cementing agent, are mixed in an
open-structured roadway.

• main road is important road for the flow divider and for road transport and other.

• A manhole is the top opening to an underground utility vault used to house an access
point for making connections, inspection, valve adjustments or performing maintenance on
underground and buried public utility and other services including sewers, telephone,
electricity, storm drains, district heating and gas.

• Metal is a material (an element, compound, or alloy) that is typically hard, opaque, shiny,
and has good electrical and thermal conductivity.

• A structurelike stone or tile for floor

• A pedestrian crossing or crosswalk is a place designated for pedestrians to cross a road.


Crosswalks are designed to keep pedestrians together where they can be seen by motorists,
and where they can cross most safely across the flow of vehicular traffic.

• Potholes or road damage caused by rain water pressure so waterlogged

• a system of pipes used to transport human waste

• A soft shoulder is unpaved ground along the edge of a highway.

• Tarmac is a type of road surfacing material patented by Edgar Purnell Hooley in 1901. The
term is also used, with varying degrees of correctness, for a variety of other materials,
including tar-grouted macadam, bituminous surface treatments, and modern asphalt
concrete. The term is also often used incorrectly to describe airport aprons, "ramps",
and runways.

• A drain pipe installed in the ground.

Vous aimerez peut-être aussi