Académique Documents
Professionnel Documents
Culture Documents
, Ltd
Dongshan Area,Ruian City,Zhejiang,China
Email: vicent.snda@gmail.com , vicent@snda-machinery.com
Usage: This machine is specialist for horizontal and vertical cutting paper rolling
materials to A4 ,A3, A2 size etc .it can be with 1 roll(this quotation sheet is for 1 roll
only), or 2rolls, or 4 rolls etc
Main Specification
1.Unwinding unit
(1) Machine shelf adopts cast quality steel plate
(2) Adopts air pressure automatic lifting function
(3) Lifting adopts 150 model double cylinder start
(4) Magnetic powder tension control system
(5) Control type :Use potentiometer control
(6) Tension control scope : 3-50kg
(7) Tension magnetic powder use 10kg controller
(8) Material pulling rolls adopts air shaft type
(9) Transmission guide roll:aluminum guide roll by active balance treatment
(10) Material can be adjustable right and left
(11) Control type:Pneumatic control
(12) Error correction motor adopts 130 model sychronization motor drive
(13) Photo electric for error-correction (precision+-0.2mm) Sensor made in Taiwan
3.Traction device:
1. Structure style:active traction and passive press fasten style
2. Based seat is casting structure
3. Traction roller is rubber roller
4. Press fasten style: controlled by pneumatic
5. Press fasten cylinder
6. Transmission guide roller: aluminum guide roller
7. Traction motor adopts servo motor,Drive in-phase fix the length
8. Length can be adjustable by PLC
5 . Cutting Unit
(1) Cutting style: fix well the lower cutter and cut actively by upper cutter
(2) Cutter holder: adopts casting heavy style structure
(3) Slip bearing
(4) Fount
(5) Lubricating oil can be recycled using
(6) Both upper and lower cutters adopts bar style imported balance silic steel
cutter
(7) Cutting blade
(8) Cutter position can be adjustable by hand
(9) Active transmission style: main motor transmission equipped with derailleur
enable centrifugal wheel joined with connecting pole to run cutter
reciprocating
(10) Main motor: by transducer speed adjusting
(11) Transducer: Edison brand
(12) Transmission: adopts gear wheel and chain wheel together structure
(13) Centrifugal wheel
(14) Connecting pole
6 . Slitting Unit
(15) Slitting way: Bottom blade initiative, drive upper balder to slit.
(16) Adopts round cutters
(17) Upper cutter shaft adopts steel shaft
(18) Upper round cutters is made form shanghai Shenlong group
(19) Bottom cutter shaft adopts steel shaft
(20) Bottom round cutter adopts shanghai shenlong cutter
(21) Slitting precision : ±0.2mm
8.Delivery device:
(1) Automatic meter counting and stop
(2) Automatic delivery when reach the numbers setup in PLC
Wenzhou Snda Machinery Co., Ltd
Dongshan Area,Ruian City,Zhejiang,China
Email: vicent.snda@gmail.com , vicent@snda-machinery.com
(3) Delivery table with belt
9.Other condition:
(4) Power supply :Three phases four lines air switch, 380V / 50Hz (can be made
according to users
(5) Air source:Max 5.5kg/cm2×5m3/min
配件清单 SPARE PARTS LIST
Packaging machine
Introduction:
The machine is designed by ourselves on basis of producing cellophane overwrapping
machine for few years’ experience, which working principle is driven by a series of
mechanical structure and connecting pneumatic device, which can finish
instantaneously multi-actions such as automatic feeding paper( film), falling paper(film),
rectifying a deviation, cutting paper(film),gluing and wrapping and so on during the
process of package.
This machine integrated optics, mechanics, electricity, pneumatics and instrumentation .
Also reasonable structure, advanced technique, easy operation,which is suitable for the
package of global general official A4 format anti-static duplicating paper, instead of
hand packing so as to reduce the working intensity and then improve the working
effectiveness.
Main Character
Productive capacity 7-8 reams/min
Function of roll overwrap paper 7-8 sheets/min
can be automatically cross cut and fed
Specification of packed object 210×297×50mm (Based on the height 500
pieces of copying paper.)
Wrapping Material Roll laminated paper
Sealing Method Hot melt glue
Power supply 380V/3Phase/4Wire
Motor power 5.1kw
Rubber roller power 2.25 kw
Compressed air 0.6-0.8 mpa
Paper size(Lenght×Width) 550-560mm×386mm
Overall dimension 4530×3050×1450mm
Weight 2T