Académique Documents
Professionnel Documents
Culture Documents
Mini Hi-Fi
System
MODEL
CJ87 (CJ87, CJS87F)
*MFL69801005* www.lg.com
2 Getting Started
Safety Information
CAUTION
1 RISK OF ELECTRIC SHOCK
DO NOT OPEN
Getting Started
CAUTION concerning the Power Cord This device is equipped with a portable battery or
Most appliances recommend they be placed upon a accumulator.
dedicated circuit; Safety way to remove the battery or the battery
That is, a single outlet circuit which powers only from the equipment: Remove the old battery or
that appliance and has no additional outlets or battery pack, follow the steps in reverse order than 1
branch circuits. Check the specification page of this the assembly. To prevent contamination of the
Getting Started
owner’s manual to be certain. Do not overload wall environment and bring on possible threat to human
outlets. Overloaded wall outlets, loose or damaged and animal health, the old battery or the battery
wall outlets, extension cords, frayed power cords, or put it in the appropriate container at designated
damaged or cracked wire insulation are dangerous. collection points. Do not dispose of batteries or
Any of these conditions could result in electric battery together with other waste. It is recommended
shock or fire. Periodically examine the cord of your that you use local, free reimbursement systems
appliance, and if its appearance indicates damage batteries and accumulators. The battery shall not be
or deterioration, unplug it, discontinue use of the exposed to excessive heat such as sunshine, fire or
appliance, and have the cord replaced with an exact the like.
replacement part by an authorized service center. CAUTION: No naked flame sources, such as lighted
Protect the power cord from physical or mechanical candles, should be placed on the apparatus.
abuse, such as being twisted, kinked, pinched, closed
in a door, or walked upon. Pay particular attention to Symbols
plugs, wall outlets, and the point where the cord exits
the appliance. ~ Refers to alternating current (AC).
The Power Plug is the disconnecting device. In case
0 Refers to direct current (DC).
of an emergency, the Power Plug must remain readily
accessible. Refers to class II equipment.
1 Refers to stand-by.
Table of Contents
1
36 – Auto power down 4 Troubleshooting
37 – AUTO POWER On
37 – Auto function change 41 Troubleshooting
38 Setting the Clock 41 – General
38 – Setting the Clock through “Music Flow 2
Bluetooth” App 5 Appendix
38 – Using your player as an alarm clock
39 LG Sound Sync 43 General specifications
40 WIRELESS PARTY LINK Connection 44 Speakers specifications
44 Trademarks and Licenses 3
45 Maintenance
45 – Notes on Discs
45 – Handling the Unit
5
6 Getting Started
Unique Features
BLUETOOTH®
1
Listens to music stored on your Bluetooth device.
Getting Started
Portable In
Listens to music from your portable device. (MP3,
Notebook, etc.)
Playback effects
Listens to music with various sound and playback
effects.
LG Sound Sync
Controls volume level of this unit by the remote
control of your LG TV that is compatible with LG
Sound Sync.
Getting Started 7
Getting Started
USB devices.
MP3/WMA file compatibility with this unit is limited
as follows.
USB device requirement
yy Sampling frequency : within 32 to 48 kHz (MP3),
yy Devices which require additional program
within 32 to 48 kHz (WMA)
installation when you have connected it to a
yy Bit rate : within 32 to 320 kbps (MP3), computer, are not supported.
40 to 192 kbps (WMA)
yy Do not extract the USB device while in operation.
yy Maximum files : Data CD : 999 / USB : 2,000
yy For a large capacity USB, it may take longer than a
yy Maximum folders : Data CD : 99 / USB : 200 few minute to be searched.
yy File extensions : “.mp3”/ “.wma” yy To prevent data loss, back up all data.
yy Certain MP3/WMA files may not be played yy If you use a USB extension cable or USB hub, the
depending on the type or format of the file. USB device is not recognized.
yy CD-ROM file format : ISO 9660/ JOLIET yy Using NTFS file system is not supported. (Only
yy We recommend that you use Easy-CD Creator, FAT(16/ 32) file system is supported.)
which creates an ISO 9660 file system. yy This unit recognizes up to 2,000 files.
The DTS is not supported. In case of DTS audio yy External HDD, Card readers, Locked devices, or
format, audio is not output. hard type USB devices are not supported.
You have to set the disc format option to [Mastered] yy USB port of the unit cannot be connected to PC.
in order to make the discs compatible with the LG The unit cannot be used as a storage device.
players when formatting rewritable discs. When yy Some USB may not work with this unit.
setting the option to Live File System, you cannot use
it on LG players.
(Mastered/Live File System : Disc format system for
Windows Vista)
8 Getting Started
Remote control • • • • • • • • • • • • • • a• • • • • • • • • • • • • •
1 (Standby) : Turns the power on or off.
B (Open/Close) : Opens and closes the disc tray.
1 VOL (Volume) +/- : Adjusts speaker volume.
F (Function) : Selects the function and input source.
Getting Started
• • • • • • • • • • • • • • b• • • • • • • • • • • • • • • • • • • • • • • • • • • • c• • • • • • • • • • • • • •
REPEAT : Listens to your tracks/files repeatedly or 0 to 9 numerical buttons : Selects numbered tracks,
randomly. files, or preset number.
TUNING-/+ : Selects the radio stations. CLOCK : Sets a clock and checks a time.
1
C/V (Skip/Search) : ALARM : With the ALARM function you can turn on
Getting Started
-- Skips backward or forward. CD, USB play and tuner reception at a desired time.
-- Searches for a section within a track/file. • • • • • • • • • • • • • • d• • • • • • • • • • • • • •
N (Play/Pause) : VOICE CANCELLER : You can enjoy the function
-- Starts or pauses playback. while playing the music, by reducing singer vocal of
music in the various source.
-- Selects stereo/mono.
SLEEP : Sets the system to turn off automatically at
Z (Stop) :
a specified time.
-- Stops playback. (Dimmer : The display window will be darkened by
-- Cancels DELETE function. half.)
SOUND EFFECT : Chooses sound impressions. SET : Confirms the setting.
REGION EQ : Chooses region equalizer. KEY CHANGER ( / ) : Changes the key to suit
INFO : your vocal range.
-- Sees information about your music. An MP3 file ECHO : Selects ECHO mode.
often come with ID3 tag. The tag gives the Title, * : This button is not available.
Artist, Album or Time information.
VOCAL EFFECTS : Selects various vocal effects
-- Sees Bluetooth device name of the unit in BT mode.
READY.
USB REC : Records to USB.
-- Sees the name of connected all Bluetooth device
in Bluetooth mode.
-- In status of WIRELESS PARTY LINK connection,
device name of SLAVE unit appears in the MASTER
unit and device name of MASTER unit appears in
the SLAVE unit.
10 Getting Started
Front panel
a bc d e f g hi
1
Getting Started
t j
s k
r q p on m l
a 1 (Standby) f DJ LOOP
Turns the power on or off. Selects DJ LOOP mode.
b USB REC / DEMO (DJ LOOP mode can use during CD/USB
- Records to USB. playback.)
- In power off status, if you press T (Play/Pause)
USB REC / DEMO, show DEMO mode. - Starts or pauses playback.
c USB 1 Port - Selects stereo/mono.
a
You can play sound files by connecting the USB U (Skip/Search)
device. - Skips forward.
d PARTY THRUSTER MODE - Searches for a section within a track/file.
Selects PARTY THRUSTER mode. - Selects the radio stations.
I (Stop) REGION EQ / BASS BLAST
Stops playback or cancels DELETE function. - Chooses region equalizer.
- Press and hold to select BASS effect directly.
Y (Skip/Search)
- Skips backward. b c d e g USB 2 Port
- Searches for a section within a track/file. You can play sound files by connecting the USB
- Selects the radio stations. device.
R (Open/Close) h F (Function)
Opens and closes the disc tray. Selects the function and input source.
e Display window Input source / Function Display
Disc CD
USB USB1 / USB2
AUX input AUX
Portable input PORTABLE
Bluetooth BT
LG Sound Sync (Wireless) LG TV
Radio FM / AM
Getting Started 11
Getting Started
VOCAL EFFECTS (If you want to use USER, you have to register a
Selects VOCAL EFFECTS mode. source with “Music Flow Bluetooth” app.)
VOICE CANCELLER 1, 2, 3, 4 (DJ PRO PAD)
You can enjoy the function while playing the Press a desired sound pad.
music, by reducing singer vocal of music in the s SCRATCH / SEARCH & LEVEL CONTROL
various source. - Turns clockwise or counterclockwise to make
ECHO scratch sound.
Selects ECHO mode. - Turns clockwise or counterclockwise to control
k MASTER VOLUME / MULTI JOG the USER EQ level.
- Adjust speaker volume. - Searches a folder or a file.
- Selects various vocal effects mode. - Adjust DJ EFFECT level.
l PORT. (Portable) IN jack t DJ EFFECT
Selects a desired DJ EFFECT.
m MIC (Microphone) 1/2 jack
USER EQ
n (Remote sensor) Selects the sound effect created by your own.
o KEY CHANGER ( / ) (Page 28)
Changes the key to suit your vocal range. SEARCH
MIC (Microphone) +/- Moves to folder or file in selection mode.
Adjust microphone volume. OK
Selects a folder when searching a file.
12 Getting Started r q p on m l
Rear panel
1
Getting Started
b c d
Connecting
eliminate electrical interference.
1. Pull the stopper [a] of the ferrite core to open.
2. Wind the power cord around the ferrite core
twice.
3. Close the ferrite core until it clicks.
14 Connecting
AUX IN Connection
Connect an output of auxiliary device (Camcorder, TV,
Player, etc) to the AUX IN (L/R) connector.
If your device has only one output for audio(mono), 2
connect it to the left(white) audio jack on the unit.
Connecting
Portable cable
White
Audio cable
Red
FM antenna
2
Connecting
,,Note AM antenna
Removing the USB device from the unit :
1. Choose a different function/mode or ,,Note
press Z on the remote control or I on yy Be sure to fully extend the FM wire antenna.
the unit twice in a row. yy To prevent noise pickup, keep the AM loop
2. Remove the USB device from the unit. antenna away from the unit and other
components.
Operating 17
Operating
Press N on the remote control or one function to another, you can listen to
Pause music from the point where it’s last been
T on the unit during playback.
played.
Searching Press and hold C/V on the yy If you leave the disc tray open for 5 minutes,
for a section remote control or Y/U on the it will close automatically.
within a track/ unit during playback and release it
file at the point you want to listen to.
Operating
3. To delete file/folder or format, press and hold
DELETE on the remote control.
,,Note
yy The DJ EFFECT mode is displayed for 3
>>Caution seconds when a DJ EFFECT key on the unit is
inputted.
yy Do not extract the USB device during
operation. (play, delete, etc.) yy The current gage level is displayed when
adjusting gage.
yy Regular back up is recommended to prevent
data loss. yy If the function changed or the unit is turned
off and on, DJ EFFECT mode with DJ EFFECT
yy The delete function may not be supported
according to the USB status. (lock, etc.) is turned off.
SCRATCH
You can output and mix the sound effects of the
SCRATCH.
Rotating SCRATCH / SEARCH & LEVEL CONTROL
on the unit to mix the scratch sound.
-- You can hear effect of scratch sound depending
on the direction in which you rotate SCRATCH /
SEARCH & LEVEL CONTROL on the unit.
20 Operating
AUTO DJ DJ PRO
Auto DJ blends the end of one song into the It allows you to mix CLUB, DRUM or USER sound
beginning of another for seamless playback. effect. Each mode has up to 4 sounds effect.
It equalizes volume across tracks/files for 1. Press and hold DJ PRO (CLUB, DRUM or USER)
uninterrupted playback. on the unit to select a desired DJ PRO sound
Press AUTO DJ on the remote control repeatedly, the effect.
display changes as followings. 2. Press DJ PRO pad (1, 2, 3, 4) of desired sound
AUTO DJ RANDOM AUTO DJ SEQUENTIAL on the unit.
AUTO DJ OFF
,,Note
Display yy If you want to use USER, you have to register
Mode Description
Window a source with “Music Flow Bluetooth” app.
If the source is not register to USER, “EMPTY”
OFF AUTO DJ OFF -
or “NO SOUND” appears on the display
3 window.
The music is played
AUTO DJ yy Initial DJ Pro mode is CLUB sound effect.
RANDOM randomly on this
Operating
RANDOM
mode. yy DJ Pro mode is displayed for 3 seconds when
you press DJ PRO (CLUB, DRUM or USER)
The music is played on the unit.
AUTO DJ
REPEAT repeatedly on this yy The DJ PRO sound is mixed when you press
SEQUENTIAL
mode. DJ PRO pad (1, 2, 3, 4) on the unit.
yy The currently playing DJ PRO sound is
,,Note stopped and the selected DJ PRO sound
yy AUTO DJ mode does not support searching outputs if you press a different DJ PRO pad
for a section within a track/file or to play (1, 2, 3, 4) on the unit while DJ PRO sound is
repeatedly or randomly. playing.
yy If you move to other functions or stop the
music using Z on the remote control or I
on the unit on AUTO DJ mode, AUTO DJ will
be disabled.
yy AUTO DJ is not supported in the music file
whose length is less than 60 seconds.
yy Only AUTO DJ SEQUENTIAL is selected when
played JUKE BOX list.
Operating 21
DJ LOOP
The certain section (about 1 sec) of sound is
repeatedly played. (CD, USB only)
During playback, press and hold DJ LOOP on the unit
at the point you want. And you can cancel DJ LOOP
function by releasing it.
,,Note
This function is released after operating 10
times or releasing DJ LOOP on the unit.
PARTY THRUST
It allows you to create a party atmosphere.
1. Select the mode by pressing PARTY THRUSTER
3
MODE on the unit.
Operating
The sound effect will react differently according
to the mode.
MODE 1 MODE 2 MODE 3
2. After selecting the mode, slide up the lever of
PARTY THRUSTER on the unit to create a party
atmosphere.
The LED lighting and the sound effect will
react according to moving the lever of PARTY
THRUSTER on the unit.
OFF THRUST 1 THRUST 2 CLIMAX
22 Operating
yy Available Devices : Smart phone, MP3, Notebook, pairing operation. When searching for this unit
etc. with the Bluetooth device, a list of the devices
yy Version : 4.0 found may appear in the Bluetooth device
display depending on the type of Bluetooth
yy Codec : SBC
device. Your unit appears as “LG CJ87 (XX)”.
3. When this unit is successfully connected with Controls connected Bluetooth device
your Bluetooth device, “PAIRED” appears on the
You can control connected Bluetooth device by the
display window and change to Bluetooth device
unit; play, pause, stop, skip.
name soon. Then “BT” will appear on the display
window. ,,Note
,,Note yy Only Android OS and iOS is available to use
this function.
yy "PAIRED" will momentarily appear on the
display when you connect other devices for yy This function may not be supported
multi pairing. depending on the Bluetooth device, or
yy If the device name is unavailable, “_” will be operated differently.
displayed.
Operating
yy When using Bluetooth technology, you have unintended Bluetooth connection.
to make a connection between the unit and To turn on this function, press and hold N on
the Bluetooth device as close as possible and the remote control or T on the unit for about 5
keep the distance. seconds in BT (Bluetooth) function.
However, it may not work well in certain “BT LOCK” appears then you can limit Bluetooth
situations as described below : connection.
-- There is an obstacle between the unit and To turn off this function, press and hold N on
the Bluetooth device. the remote control or T on the unit for about 5
-- There is a device using same frequency seconds in BT (Bluetooth) function.
with Bluetooth technology such as a “BT UNLOCK” appears.
medical equipment, a microwave or a
wireless LAN device.
yy You should connect your Bluetooth device to
this unit again when you restart it.
yy Even if this unit connected up to 3 Bluetooth
devices in the Bluetooth mode, you can play
and control music by using only one of the
connected devices.
24 Operating
,,Note
yy The sound may be interrupted when the
connection has interference from other
electronic devices.
yy Depending on the type of the device, you may
not be able to use the Bluetooth function.
yy You can enjoy wireless system using phone,
MP3, Notebook, etc.
yy The more distance between the unit and the
Bluetooth device, the lower the sound quality
becomes.
yy Bluetooth connection will be disconnected
when the unit is turned off or the Bluetooth
device gets far from the unit.
3 yy When Bluetooth connection is disconnected,
connect the Bluetooth device to the unit
Operating
again.
yy When a Bluetooth device is not connected,
“BT READY” appears on the display window.
yy When you use the Bluetooth function,
adjust the volume to a proper level on the
Bluetooth device.
yy If a Bluetooth device is connected when
using LG TV, LG TV is disconnected and the
Bluetooth device is connected.
yy When you connect Bluetooth device (iOS
device etc.) to this unit or operate the device,
the volume level can be synchronized with
each other.
yy Bluetooth connection will be disconnected
when you change the Bluetooth function
to the others. In “Music Flow Bluetooth” app
connection, only one device which you are
playing keeps Bluetooth connection. You can
control the Bluetooth device with this unit
but you cannot use sound output.
yy When entering Bluetooth function, this unit
automatically connect to Bluetooth device
which is connected the last.
(Auto connection may not be supported
depending on the connected device
specifications.)
Operating 25
Operating
To enjoy more features, you are recommended to 2. Tap an icon for installation.
download and install free “Music Flow Bluetooth”
app. ,,Note
yy Make sure that your Bluetooth device is
Here is introduce a few of the many features of connected to the Internet.
“Music Flow Bluetooth” app.
yy Make sure that your Bluetooth device
Multi Juke box : Your entertainment increases three has a scanning software application. If you
fold when you connect up to 3 Bluetooth phones at don’t have one, download one from “Google
the same time. Play music from all three phone and Android Market (Google Play Store)”.
create a customized playlist from all the phones.
yy Depending on the area, QR code may not
Sampler Creator : Record effects on your work.
smartphone and very simply sync them via
Bluetooth to the system. Be as creative as you can
be.
26 Operating
Operating
Or 6. Repeat steps 2 to 5 to store other stations.
Manual tuning : 7. To listen a preset station, press
Press TUNING-/+ on the remote control or PRESET·FOLDER W/S or 0 to 9 numerical
Y/U on the unit repeatedly. buttons on the remote control.
3. Adjust the volume by pressing VOL +/- on the
remote control or rotating volume knob on the Deleting all the saved stations
unit repeatedly.
1. Press and hold JUKEBOX/MEMORY on the
remote control for two seconds.
Improving poor FM reception “ERASEALL” will flash up on the unit display.
Press N on the remote control or T on the unit. 2. Press JUKEBOX/MEMORY on the remote
This will change the tuner from stereo to mono and control to erase all the saved radio stations.
usually improve the reception.
28 Operating
Operating
(Page 32) song 1. Press and hold USB REC on the remote control
or USB REC / DEMO on the unit for 3 seconds.
2. Press C/V on the remote control or
Quick recorded All songs
Y/U on the unit to select a bit rate.
In case below, scope is 3. Press USB REC on the remote control or USB
limited. REC / DEMO on the unit to finish the setting.
- After File search (Page
CD, USB 18), quick recorded an The making of unauthorized copies of copy-
indexed song protected material, including computer
Full stop - After Folder search programs, files, broadcasts and sound recordings,
(Page 18), quick may be an infringement of copyrights and
recorded All songs on constitute a criminal offense.
Folder This equipment should not be used for such
purposes.
- After JUKE BOX On
Be responsible
(Page 31), quick
Respect copyrights
recorded All songs of
JUKE BOX
AUX,
PORTABLE, - Recorded until stop
FM, AM
,,Note ,,Note
yy For stable recording, the output sound level yy You can record various sound using DJ
goes down on its own when you record music EFFECT, SCRATCH, DJ PRO or MIC.
from CD to USB. (Except when recording USB/ CD that are in
yy You can only change volume level between stop status.)
MIN and 30 during recording. (Only CD yy You can control recorded microphone sound
function) according to microphone volume.
yy When you stop recording, the file that has yy You may not store more than 2,000 files.
been recorded at that time will be stored. yy In case of the unsupported MP3/WMA file,
(Except when recording MP3/ WMA files that the file recording may be stopped.
are in stop status.)
yy When you are recording during playback, the
yy Do not remove the USB device or turn off sound now playing is output.
the unit during USB recording. If does not, an
incomplete file may be made and not deleted yy It’ll be stored as follows.
like “NO USB”, “ERROR”, “USB FULL”, “NOT $%@3&$ '*-&@3&$ $%@3&$ '*-&@
"6%*0@ "6%*0@53"$,@ "
SUPPORT” or “FILE MAX” is displayed on the "6%*0@ "6%*0@53"$,@ %
display window.
The other status The other status
yy Multi card reader device or external$%@3&$
HDD can
'*-&@3&$ $%@3&$ '*-&@3&$
not be used for USB recording. "6%*0@
"6%*0@
"6%*0@53"$,@ "#$ 'JMFOBNF
5IFPUIFSTUBUVT
5IFPUIFSTUBUVT
* : AUX and the like. 1MBZPSQBVTFTUBUVT
1MBZPSQBVTFTUBUVT
Tuner : The current recording frequency is shown
Operating 31
Operating
PRESET·FOLDER W/S on the remote control
Deleting JUKE BOX list
to select the JUKE BOX program number.)
Deleting function only works in the edit mode.
5. Press JUKEBOX/MEMORY on the remote
control once again. 1. Press and hold JUKEBOX/MEMORY on the
remote control to enter the edit mode.
To play the JUKE BOX list, press N on the remote
control after you make the list. 2. Select a song by pressing
PRESET·FOLDER W/S on the remote control
,,Note repeatedly.
When making or modifying the JUKE BOX list,
3. Press DELETE on the remote control while a
REPEAT mode is off.
song is selected.
,,Note
Enjoying JUKE BOX yy If there is no JUKE BOX list, “JUKE BOX NONE”
Press JUKEBOX/MEMORY on the remote control appears on the display window when you
once. “JUKE BOX ON” appears on the display window. press JUKEBOX/MEMORY on the remote
To play JUKE BOX list, press N on the remote control.
control or T on the unit. yy JUKE BOX is switched off in the case below.
To cancel it, press JUKEBOX/MEMORY on the -- Changing to a different function.
remote control once. -- Turning off and on the unit.
“JUKE BOX OFF” appears on the display window. -- Operating the numerical buttons on the
remote control.
-- Playing a file by using SEARCH and
SCRATCH / SEARCH & LEVEL CONTROL
on the unit.
yy JUKE BOX list is cleared in the case below.
-- Removing the disc or the USB device.
-- Deleting or recording music files in the USB
device.
32 Operating
Operating
yy This function is available to use only when a
yy If sound through the microphone is extremely microphone is connected.
loud, it may be distorted.
In this case, press MIC - on the unit to yy If a microphone is not connected, “INSERT
minimum. MIC” appears in the display window.
yy You can give an echo effect to the sound yy It is not available on the mono source.
from the microphones by pressing ECHO. yy To initialize it, change the function or
disconnect the microphone.
yy This function may not be initialized depending
on the status of connected devices.
34 Operating
ECHO
When you connect your microphone to the MIC
jack, you can give an echo effect to the sound from
the microphones by pressing ECHO.
ECHO 1 ECHO 2 ECHO OFF
,,Note
yy If a microphone is not connected, “INSERT
MIC” appears in the display window.
yy If you press VOCAL EFFECTS button on
ECHO mode, after backing up current ECHO,
turn off ECHO mode and operate VOCAL
EFFECTS mode.
Press ECHO again, after backing up current
VOCAL EFFECTS, operate ECHO mode.
3
Operating
36 Operating
Dimmer
Press SLEEP on the remote control once.
The display window will be darkened by half.
To cancel it, press SLEEP on the remote control
repeatedly until dim off.
,,Note
All the lighting turns off when dimmer is being
operated.
Operating 37
Operating
yy If you disconnect Bluetooth connection by
this unit, some Bluetooth devices try to When LG TV is connected
connect to the unit continually. Therefore it is When you turn on your LG TV connected by LG
recommended to disconnect the connection Sound Sync, this unit changes the function to LG TV.
before turning off the unit. You can hear the sound from your TV.
yy If you try to connect to the “Music Flow
Bluetooth” app, Bluetooth function of this
,,Note
yy This function is not available during recording
unit is turned on. or deleting.
yy If you turn on the unit using LG TV or yy This function only works with devices that
Bluetooth function, proper function of this were previously connected.
unit is turned on.
yy If the Bluetooth connection lock function
yy If you have already paired with this unit, is set, Bluetooth and LG TV connection will
automatically this unit can turn on by an input be only available on Bluetooth and LG TV
source when this unit is turned off. function.
yy If you turn off the unit by pressing the power
button for more than 5 seconds, Auto Power
On function is disabled.
To activate it, turn on the unit.
38 Operating
Operating
3. Set up the sound output of TV to listen to the
yy If you try to change the function on using
sound through this unit :
the LG TV function, volume will be changed
TV setting menu [Sound] [TV Sound output]
according to the LG TV volume level.
[LG Sound Sync (Wireless)]
yy Details of TV setting menu vary depending on
“PAIRED” appears on the display window for the manufacturers or models of your TV.
about 3 seconds and then you can see “LG TV”
yy If you connect LG Sound Sync when “Music
on the display window if the TV and this unit are
Flow Bluetooth” app is connected, control
connected normally.
through the app is available.
yy If you turned off the unit directly by pressing
1, LG Sound Sync will be disconnected.
To use this function again, you should
reconnect the TV and the unit.
yy If an LG TV is connected when using
Bluetooth, Bluetooth is disconnected and
the LG TV is connected.
yy The volume may be increased when the TV
and this unit is connected by LG Sound Sync.
Decrease the TV volume and then connect
with this unit.
yy When you turn on your LG TV connected
by LG Sound Sync or enter LG TV function,
this unit changes the function to LG TV
automatically.
yy You should set the TV Sound output manually
depending on the LG TV version.
40 Operating
Troubleshooting
General
Problem Cause & Solution
yy Turn off the power of this unit and the connected external device (TV, Woofer,
DVD-player, Amplifier, etc.) and turn them on again.
The unit does not work yy Disconnect the power cord of this unit and the connected external device (TV,
properly Woofer, DVD-player, Amplifier, etc.) and then try connecting again.
yy Previous setting may not be saved when device power is shut off.
yy The power cord is not plugged in. Plug in the power cord.
No Power yy Check whether electricity failed.
Check the condition by operating other electronic devices.
Troubleshooting
yy An unplayable disc is inserted. Check the playable disc.
yy No disc is inserted. Insert a disc.
The unit does not start
yy The disc is dirty. Clean the disc. (Page 45)
playback
yy The disc is inserted upside down.
Place the disc with the label or printed side facing upwards.
4
Troubleshooting
Appendix 43
General specifications
General
Power requirements Refer to the main label on the unit.
Power consumption Refer to the main label on the unit.
Dimensions (W x H x D) Approx. 450 mm x 170 mm x 349 mm
Operating temperature 5 °C to 35 °C (41 °F to 95 °F)
Operating humidity 60 %
Inputs
Analog audio in (AUX IN) 2.0 Vrms (1 kHz, 0 dB), 600 Ω, RCA jack (L, R) .
Portable in (PORT. IN) 1.0 Vrms (3.5 mm stereo jack) x 1
Microphone (MIC 1/2) Sensitivity 20 mV (1 kHz), 6.3 mm jack x 2
Tuner
FM Tuning Range 87.5 to 108.0 MHz or 87.50 to 108.00 MHz
AM Tuning Range 522 to 1,620 kHz, 520 to 1,710 kHz or 522 to 1,710 kHz
System
Frequency Response 40 to 20,000 Hz 5
Signal-to-noise ratio More than 75 dB
Appendix
Dynamic range More than 80 dB
Bus Power Supply (USB) 5 V 0 500 mA
Speakers specifications
Front speaker
HIGH : 1 Way 1 Speaker
Type
LOW : 1 Way 1 Speaker
HIGH : 6 Ω
Impedance
LOW : 6 Ω
HIGH : 585 W RMS
Rated Input power
LOW : 590 W RMS
HIGH : 1,170 W RMS
Max. Input power
LOW : 1,180 W RMS
Dimensions (W x H x D) Approx. 320 mm x 454 mm x 309 mm
yy Design and specifications are subject to change without notice.
The Bluetooth® word mark and logos are owned by the Bluetooth® SIG, Inc. and any use of such marks by LG
5 Electronics is under license.
Other trademarks and trade names are those of their respective owners.
Appendix
Appendix 45
Appendix