100%(2)100% ont trouvé ce document utile (2 votes)
302 vues9 pages
This document contains questions and answers related to drilling operations. It covers topics such as factors that affect penetration rates, maximum weight on bit, types of wellbore sticking, steps to take in response to different well control situations, safety limits for tripping operations, use of equipment like separators and top drives, well control procedures, drilling parameters, and causes of wellbore instability. The document provides concise explanations and identifies true/false statements related to drilling operations, well control, and downhole tools and equipment.
This document contains questions and answers related to drilling operations. It covers topics such as factors that affect penetration rates, maximum weight on bit, types of wellbore sticking, steps to take in response to different well control situations, safety limits for tripping operations, use of equipment like separators and top drives, well control procedures, drilling parameters, and causes of wellbore instability. The document provides concise explanations and identifies true/false statements related to drilling operations, well control, and downhole tools and equipment.
This document contains questions and answers related to drilling operations. It covers topics such as factors that affect penetration rates, maximum weight on bit, types of wellbore sticking, steps to take in response to different well control situations, safety limits for tripping operations, use of equipment like separators and top drives, well control procedures, drilling parameters, and causes of wellbore instability. The document provides concise explanations and identifies true/false statements related to drilling operations, well control, and downhole tools and equipment.
⏩What are the factors affect the penetration rates?
Formation type Weight on bit WOB Flow rate rounds per minute
⏩ what is the maximum weight that can be used from the BHA for WOB? 85% of BHA Weight to avoid buckling-
⏩Define the type of stuck related with the following?
High permeable formation and filter cake ......differential stuck Deviated wells,dog leg .......well bore geomatry Unable to move up or down unable to rotatate unable to circulate ....mechanical stuck Unable to move up or down unable to rotate and able to circulate ....differential stuck
⏩waht should you do in each of the following cases
You have differential stuck- Reduce mud weight (You have mechanical stuck (tight hole- Jarring to previous free position While pulling out of the hole (tripping out ) you got 50bbl gain- Shut the well in and strip back to bottom to kill the well
You can also read
Schlumberger Exam for Roustabout,Floorman,Derrickman And Driller 2017
⏩what is the maximum allowable over pull while POOH in
vertical and horizontal well ? 20klbs
⏩we can use separator while drilling instead of vacum degassed
Why? a- true b-false False .....seperator can only be used while killing a well
⏩How to use top drive function to make aconnection
Set slips,break out top drive from drill string ,plup new stand make up near stand in drill string
⏩What is the most important steps in blowout prevention once
awarning sign has been detected ? Start circulation with per circulated rate and kill the well barite- Shut the blow out preventer- Pull to the shoe quickly- Call the tool pusher and company man- Close the well in properly- If the formation pressure gradient increase from 0.60 psi/ft at 1200 ft to 0.62 psi/ft at 12700 ft mud weight is 12 ppg through the interval the -overbalance increase by about 288 psi -overbalance increase constant since mud weight not changed -overbalance is reduced by 51 psi -overbalance is reduced by 237 psi
⏩pump speed increased as the pressure loading is
Decreased Increased
⏩It is okay to install aworn valve in anew seat
False True
⏩which of the following should increase by increasing the
⏩What are the causes of shale to sloughs into the bole?
-Mechanical vibration of drill string In correct mud parameter (high water loss and mud weight) Deviation angel All the bove You can also like this Derrickman interview questions with answers
⏩Why drillers do hrcak circulation going in hole ?
To fill drill string and make sure hot plugged
For more exam visit this site www.petroleumbook.com