Académique Documents
Professionnel Documents
Culture Documents
After the modem restarts, the modem interface appears. The firmware upgrade is
now complete and your modem will automatically re-establish an internet connection.
If you have a phone connected to your modem, the configuration file will
automatically be downloaded and applied approximately 5-10 minutes after the
upgrade.
Support
If you would like to log in to the modem and check your settings, you can now use
the following details:
N.B. Post upgrade, the modem will show 2 wireless networks instead of 1. The 2.4GHz
network will show the SSID name, whereas the 5GHz network will now show the SSID
name followed by -5g.
You will need to select either one or both depending on which network their device
is capable of using with the preference being 5GHz where possible.
Admin
VF-NZhg659
Support
If you would like to log in to the modem and check your settings, you can now use
the following details:
N.B. Post upgrade, the modem will show 2 wireless networks instead of 1. The 2.4GHz
network will show the SSID name, whereas the 5GHz network will now show the SSID
name followed by -5g.
You will need to select either one or both depending on which network their device
is capable of using with the preference being 5GHz where possible.
Admin
VF-NZhg659
Support
If you would like to log in to the modem and check your settings, you can now use
the following details:
N.B. Post upgrade, the modem will show 2 wireless networks instead of 1. The 2.4GHz
network will show the SSID name, whereas the 5GHz network will now show the SSID
name followed by -5g.
You will need to select either one or both depending on which network their device
is capable of using with the preference being 5GHz where possible.
Admin
VF-NZhg659
Support
If you would like to log in to the modem and check your settings, you can now use
the following details:
N.B. Post upgrade, the modem will show 2 wireless networks instead of 1. The 2.4GHz
network will show the SSID name, whereas the 5GHz network will now show the SSID
name followed by -5g.
You will need to select either one or both depending on which network their device
is capable of using with the preference being 5GHz where possible.
Admin
VF-NZhg659
-------------------------
Admin - Digiwifi
superuser - digiwifi*