Académique Documents
Professionnel Documents
Culture Documents
in JNTU World
ld
or
W
1. Group - A (Short Answer Questions)
Blooms
S. Course
Question Taxonomy
No Outcomes
Level
UNIT-I
1 What are conductors? How are they classified? Remember b
2 Differentiate metallic and electrolytic conductors? Understand a
TU
Blooms
S. Course
Question Taxonomy
No Outcomes
Level
6 What are the ingredients of compounding of plastics? Remember f
7 What is fabrication of plastics? Remember f
8 Discuss the preparation of Nylon-6, 6? Create f
9 Write properties &applications of Dacron? Remember e
10 What is natural rubber? Remember e
11 Explain the vulcanization process of rubber? Understand e
12 Write short notes on conducting polymers? Understand g
13 Explain about Teflon? Understand e
14 What r the elastomers? Remember e
15 Describe the properties of lubricants? Remember j
ld
16 What are Refractories? How they are classified? Remember b
17 What should be the flash point of a good lubricant? Remember b
18 Write the short notes on Setting and Hardening of cement Understand h
19 Give the preparation, properties and applications of Thiokol rubber Create e
20 Explain the applications of nanomaterial in various industries? Understand h
UNIT-III
or
1 Define hardness of water? What are the causes of hardness? Remember i
2 Give the differences between temporary and permanent hardness of water? Analyze i
3 Explain the basic principle of estimation of hardness by EDTA method? Understand i
4 Define sludge and scale formation in boilers? Remember i
5 Explain the reasons of caustic embrittlement? Understand i
6 Describe the internal treatment of water? Understand i
7 What are the specifications of potable water? Remember i
8 Explain the process of reverse osmosis? Understand i
9
W
What are the steps involved in treatment of potable water? Remember i
10 Give the differences between lime soda and ion exchange process? Analyze i
11 Which one is most widely used chlorination process? Remember i
12 What is meant by softening of water? Remember i
13 What is break point of chlorination? Remember i
14 Name any two coagulants? Remember i
15 Name the gases dissolved in water which causes corrosion? Remember i
16 Discover temporary hardness of Hard water? Apply i
TU
Blooms
S. Course
Question Taxonomy
No Outcomes
Level
19 What are petrochemicals? Remember j
20 Why is it necessary to remove Sulphur from oil and natural gas? Remember j
UNIT-V
What are phase diagrams? How are they drawn? What information do they
1 Remember l
provide?
2 Draw a neat phase diagram of one component system? Create l
Explain the curves, areas and points with reference to the phase rule for water
3 Understand l
system?
What is a eutectic system? What are the characteristics of the eutectic system Remember
4 l
and interpret the diagram?
ld
5 What is Adsorption? Remember m
6 What are Isotherms? Remember m
7 Give the equation of Freundlich and Langmuir adsorption isotherm? Remember m
8 Explain the applications of adsorption? Understand m
9 What are colloids? Remember m
10 Explain the classification of colloids? Remember m
or
11 What are electrical properties of colloids? Remember m
12 What are micelles? Remember m
13 Give the applications of colloids in industry? Understand m
14 Differentiate the dispersed phase from dispersion medium? Understand m
15 What are the factors affects the adsorption of a gas on a solid adsorbent? Remember m
Outline the differences between physiorption and chemisorption with Remember
16 m
examples?
17 What is Tyndall effect? Remember m
W
18 Differentiate between lyophilic and lyophobic colloids with examples? Analyze m
19 Distinguish adsorption and absorption? Understand m
20 Explain the terms case hardening, normalizing, nitriding and cyaniding? Understand m
UNIT-I
Define the terms conductance, specific, equivalence and molar conductance Remember
1 a
with their units? How do they change on dilution?
What are conductometric titrations? Explain the advantages of Remember
2 a
conductometric titrations?
3 What is galvanic cell? Explain the construction and reactions of Daniel cell? Remember b
What are reference electrodes? How many types of reference electrodes?
4 Understand b
Explain the functioning of SHE and SCE?
5 Derive the Nernst equation? Explain the application of this equation? Understand b
JN
Blooms
S. Course
Question Taxonomy
No Outcomes
Level
Discuss the phenomenon and applications of metal cladding and Understand
17 d
electroplating?
Explain electro less plating of nickel with relevant equations and mention its Understand
18 d
advantages over electroplating?
19 What problems are associated with corrosive and scale-forming water? Analyze d
Explain the electrochemical theory of corrosion of metals with special
20 Understand d
reference to rusting of iron?
UNIT-II
1 Explain the mechanism of chain polymerization? Understand f
2 What is step growth polymerization and give example? Remember f
ld
3 Differentiate thermoplastics and thermoset plastics? Analyze f
4 What are the ingredients of compounding of plastics? Remember f
5 What is fabrication of plastics? Explain the injection moulding of plastics? Remember f
6 Give the preparation, properties and applications of Nylon-6:6? Create e
What is natural rubber? Explain the vulcanization process of rubber with Remember
7 e
advantages?
or
What are elastomers? Give the preparation, properties and application of Remember
8 e
Buna-S and Butyl rubber?
What are conducting polymers? Explain the mechanism of conduction of Remember
9 g
these polymers?
10 Explain the preparation and applications of PVA and PLA? Understand f
Explain the mechanism of Setting and Hardening of cement with chemical Understand
11 j
reactions?
12 Explain the mechanism of different types of lubrication? Understand j
13
W
Describe the properties of lubricants? Understand i
14 What are Refractories? Explain the classification of refractories? Remember i
What are Nanomaterials? Explain the applications of nanomaterial in various
15 Apply i
industries?
16 Give the differences between addition and condensation polymerization? Analyze g
What are the fibers? How are they classified? Give an account of the fiber
17 Remember f
reinforce plastics?
18 What are the difference between free-radical and ionic chain polymerization Analyze g
TU
Blooms
S. Course
Question Taxonomy
No Outcomes
Level
List the expression of hardness of water? What are the various units
18 Remember i
employed? Explain their inter conversion?
Differentiate between lime-soda and zeolite processes for softening of water
19 Analyze i
giving merits and demerits of the two processes
Compile the natural water sterilized by chlorine, bleaching powder,
20 Apply i
chloramine and ozone?
UNIT-IV
1 Explain how fuels are classified with suitable examples? Understand j
Explain the significance of the following constituents present in coal? a)
2 Understand j
Moisture b) volatile matter c) ash content d) fixed carbon.
ld
3 What is the origin of coal? What are the characteristics of good coal? Remember j
Distinguish between the following? I) Gross and net calorific value ii)
4 Analyze j
catalytic and thermal cracking
5 Give the advantages and disadvantages of coal over gaseous fuels? Analyze j
Explain the significance of the following constituents present in coal? a) Total
6 carbon b) hydrogen c) nitrogen Understand j
or
d) sulphur e) oxygen
7 Write a note on synthetic petrol? Understand j
Describe the method of determination of calorific value of a solid fuel by
8 Understand j
Junker’s Calorimeter?
9 What are the characteristics of a good fuel? Remember j
Explain the refining of petroleum by giving the composition, boiling range
10 Understand j
and uses of
Various fractions obtained during refining? Explain the analysis of flue gases
11
by Orsat’s apparatus?
W
What is CNG? What are its composition, production, properties and
Analyze j
12 Remember j
applications?
What is calorific value of a fuel? What are the units of calorific value?
13 Remember j
Explain the different types of calorific values?
14 What is Octane number and Cetane number? Explain their significance? Remember j
15 Write an account on Dulong’ formula? Apply j
16 Explain the Bergius and Fischer-Tropsch’s process of synthesis of petrol? Understand j
17 Describe the process of refining of petroleum? Understand j
TU
Write short notes on the following. (a) Knocking (b) Natural gas. (c) Refining
18 Understand j
of petroleum
Distinguish between the following: (a) Gross calorific value from net calorific
19 value. (b) Thermal cracking from catalytic cracking. (c) Gaseous fuels from Analyze j
liquid fuels
What are the main constituents of coal? How are they analysed? Explain the
20 Remember j
significance of the different constituents of coal?
UNIT-V
What is the phase rule? Define the terms involved in the phase rule with Remember
JN
1 k
examples?
What are phase diagrams? Explain the one component system (water system) Remember
2 l
phase diagram?
3 Describe the Lead-Silver phase diagram? Understand l
4 Explain the Iron-carbon phase diagram? Understand k
5 Explain the terms case hardening, normalizing, nitriding and cyaniding? Understand l
What is Adsorption? How are they classified? Give the differences between
6 Remember m
types adsorption?
7 Derive the Freundlich adsorption isotherm? Understand m
8 Describe the Langmuir adsorption isotherm? Understand m
Blooms
S. Course
Question Taxonomy
No Outcomes
Level
9 Explain the applications of adsorption? Apply m
10 What are colloids? How are they classified? Remember m
11 Explain the different properties of colloids? Understand m
12 Describe the applications of colloids in industry? Apply m
13 What are protective colloids? Give their significance? Remember m
What are phase diagrams? How are they drawn? What is the significance of
14 Remember l
phase diagrams?
ld
Explain the Tyndal effect by Zsigmondy's ultra-microscope and electron
15 Understand m
microscope
The fusion curve of ice has a negative slope whereas the sublimation curve
16 Analyze l
has positive slope in the phase diagram, explain?
Explain the following with suitable examples (a) Condensed phase rule (b)
17 Pattinson's Understand l
or
Desilverisation of lead?
Explain how iron-carbon phase diagram provides information about the
18 formation of different Understand k
phases in iron-carbide system
What is meant by heat treatment of steel? Explain the different heat treatment
19 processes Remember k
carried out with relevant applications
Explain the classification of colloids?
20
W
What are electrical properties of colloids?
Understand m
A pair of copper (II) sulfate solutions, one concentrated and dark blue and the
other dilute and light blue, is separated by a removable barrier. (a) What will
1 Analyze b
happen when the barrier is removed? (b) What will happen to the entropy of
the system? (c) What will happen to the enthalpy of the system?
Water is a poor conductor so a salt is usually added to increase the
2 conductivity. The salt must contain ions that are harder to reduce or oxidize Remember b
than water. Using the standard reduction potentials, select a suitable salt?
If an electrochemical cell with Sn and Cu electrodes was setup, what would be
3 the two half reactions, which would be the cathode and which would be the Analyze b
JN
Blooms
Course
S No Question Taxonomy
Outcomes
Level
occur. State the hazards and controls associated with pitting corrosion?
Deposition of oil or dust on metal surfaces for a long period is undesirable.
9 Remember c
Give reasons?
10 Substantiate the statement that nature of the environment affects corrosion? Understand c
UNIT-II
1 Why are plastics indispensable in everyday life? Apply e
2 Why cannot thermosetting plastics be reused and reshaped? Remember f
3 Why does rubber become stiff in stretching? Remember e
4 Why is Teflon highly chemical resistant? Remember e
5 Natural rubber needs vulcanization. Give reason? Understand e
ld
6 PVC is soft and flexible whereas Bakelite is hard and brittle. Give reason? Understand e
7 Write a note on Nanoscience and its applications? Understand e
8 Compare viscosity and viscosity index ? Analyze h
Why do stronger intermolecular bonding exists between Nylon-6:6 molecules
9 Analyze e
than Nylon-6:10 of the same average molecular mass?
10 What should be the flash point of a good lubricant? Remember h
or
UNIT-III
0.28gm of CaCO3 was dissolved in dil.HCl and the solution made up to one
liter with distilled water. 100ml of the above solution required 28ml of EDTA
solution for titration.100ml of the water sample required 33ml of same EDTA
1 Analyze i
solution for titration. After boiling 100ml of this water cooling filtering and
then titration required 10ml of EDTA solution calculate the temporary and
permanent hardness of water?
One liter of water from Khammam Dist. in Andhra Pradesh showed the
2
W
following analysis: Mg(HCO3)2 = 0.0256gms, Ca(HCO3)2 = 0.0156 gms,
Analyze i
NaCl = 0.0167gms, CaSO4 = 0.0065 gms, and MgSO4 = 0.0054 gms.
Calculate the lime & soda required for softening of 10,000 liters of water?
One liter of water from an underground reservoir in Tirupathi Town in Analyze
Andhra Pradesh showed the following analysis for its contents: Mg(HCOO3)2
3 = 42mg; Ca(HCO3)2 = 146mg; CaCl2= 71mg;NaOH = 40mg; MgSO4 = 48 i
mg; organic impurities = 100 mg; Calculate temporary, permanent and total
hardness of this sample of 10,000 liters of water?
One liter of water from an underground reservoir in Nalgonda Town in Analyze
TU
Andhra Pradesh the following analysis. for its contents:: Mg(HCO3)2 = 0.0146
4 gms; Ca(HCO3)2 = 0.0081 gms; MgSO4 = 0.0012 gms;CaSO4 = 0.0136 gms; i
NaCl = 0.0585 gms; Organic impurities = 100 mg; Calculate temporary,
permanent and total hardness of this sample of water in degree French?
One liter of water sample collected from a water source in Andhra Pradesh Analyze
has shown the Following analysis. Mg(HCO3)2 = 14.6 mg, MgSO4 = 12mg,
5 Ca(HCO3)2 = 16.2 mg, CaCl2 = 22.2 mg, MgCl2 = 9.5 mg and organic i
impurities 100 mg. Calculate temporary and permanent hardness in Degree
French?
What are the specifications of potable water? Write short notes of break-point
JN
6 Remember i
chlorination. Discuss the process of priming and foaming.
7 What is the principle involved in internal treatment of boiler feed water? Remember i
What is desalination? Describe the different methods used for desalination of Remember
8 i
water?
Write the structure of EDTA and the complex formed between Mg +2 and
9 Understand i
EDTA?
Write a note on complex-metric titrations used for estimation of hardness of
10 Understand i
water by EDTA?
UNIT-IV
A sample of coal contains the following composition Carbon = 84%,
1 Hydrogen = 12%, Oxygen= 2%, Sulphur = 1% and the remainder being ash. Analyze j
Calculate the gross and net calorific values of the fuel?
2 Why should an ideal fuel have moderate ignition temperature? Remember j
3 Arrange wood, peat, lignite, bituminous coal and anthracite in increasing Create j
Blooms
Course
S No Question Taxonomy
Outcomes
Level
order of their moisture content?
4 What is the importance of determining fixed C in coal? Remember j
5 Compare the octane rating of alcohol with gasoline? Analyze j
6 Gasoline containing TEL used in internal combustion engines. Give reason? Remember j
7 Why a good fuel must have low ash content? Remember j
8 Why should fuel for cars should not evaporate too easily? Remember j
9 Why is net calorific value less than gross calorific value? Remember j
10 Why is coke preferred to coal in metallurgical process? Remember j
UNIT-V
Give proper explanations for the following statements
ld
(a) The fusion curve of ice has a Negative slope whereas
1 Analyze l
the sublimation curve has positive slope in the phase diagram
(b) In lead-silver system, isobaric phase diagrams are studied?
(a) What are the different allotropes of iron, their transformations and lattice
patterns?
2 Analyze k
(b) Explain the various micro constituents of iron-carbon alloys which
or
contain the allotropic forms of iron?
Explain iron-carbon phase diagram provides information about the formation
3 Understand k
of different phases in iron-carbide system?
Give proper explanations for the following statements (a) The fusion curve of
ice has a negative slope whereas
4 Analyze l
the sublimation curve has positive slope in the phase diagram (b) In lead-
silver system, isobaric phase diagrams are studied?
5 Give an account of the analytical applications of colloids? Understand m
6
W
Explain the following statements with proper illustrations. (a) Tyndal cone is
observed when a beam of light is concentrated on colloidal systems.
Understand
m
(b) Alums are used for the treatment of water supplied by municipalities?
Explain the Tyndal effect by Zsigmondy's ultra-microscope and electron Understand
7 m
microscope?
When it snows, the pressure is usually less than 1.000 atm. If the sketch of the
8 Analyze l
phase diagram is true, what should be the melting point of ice?
Explain the following with suitable examples (a) Condensed phase rule (b) Understand
9 l
Pattinson's desilverisation of lead?
TU