0 évaluation0% ont trouvé ce document utile (0 vote)
62 vues2 pages
The document provides information on electric fans, including:
1) Electric fans must be properly marked with required information like the brand name, manufacturer details, voltage rating, wattage rating, and PS or ICC marks.
2) Consumers should carefully inspect electric fans to check for these required markings and labels to ensure product quality and safety.
3) Instructions must be provided with electric fans covering safe installation, use, and maintenance of the product. Only fans that pass DTI testing standards are issued PS or ICC certification.
The document provides information on electric fans, including:
1) Electric fans must be properly marked with required information like the brand name, manufacturer details, voltage rating, wattage rating, and PS or ICC marks.
2) Consumers should carefully inspect electric fans to check for these required markings and labels to ensure product quality and safety.
3) Instructions must be provided with electric fans covering safe installation, use, and maintenance of the product. Only fans that pass DTI testing standards are issued PS or ICC certification.
The document provides information on electric fans, including:
1) Electric fans must be properly marked with required information like the brand name, manufacturer details, voltage rating, wattage rating, and PS or ICC marks.
2) Consumers should carefully inspect electric fans to check for these required markings and labels to ensure product quality and safety.
3) Instructions must be provided with electric fans covering safe installation, use, and maintenance of the product. Only fans that pass DTI testing standards are issued PS or ICC certification.
PS and ICC marks Guide for safe and reliable Consumers’ Guide electric fans. PRODUCT QUALITY AND SAFETY
ICC No. YYYY/ MMYY
PS mark ICC mark
Safety Tips in Using Electric fans
• Read and follow the manual before using the
product. Use the electric fan only as prescribed in the manual. • Always unplug the electric fan when not in use, when moving the fan from one place to another, and before cleaning. • Do not place electric fans on wet counters and floors to protect against electric shock. Always use on a dry level surface. • Keep the electric fan away from open flame and from cooking or other heating devices. • When cleaning the fan, use soft moiseneted BUREAU OF PRODUCT STANDARDS cloth. Do not immerse fan in water and avoid Department of Trade and Industry water from dripping into the motor housing. 3F Trade and Industry Bldg., • Do not use electric fans with damaged cords and plugs or after the fan malfunctions. • Never operate an electric fan without the fan grill 361 Sen. Gil Puyat Avenue, Makati City Telephone numbers: (632) 751.4740, 751.4736 Facsimile number: (632) 751.4748 Electric Fan properly in place. Email address: bps@dti.gov.ph Website: www.bps.dti.gov.ph
Printed May 2008
Electric Fan
Product Types Product Parts
• Instruction manual for installation and use shall • Electric fans consist of revolving blades that are • Fan guard - safeguards the fan blade be provided so that the electric fan can be used powered by an electric motor to propel and • Fan blade - produces the air flow safely. produce a current of air. • Fan motor - a motor that converts electricity to • There are several types of electric fans, namely: mechanical work to propel the fan • The instruction for installation shall specify: § ceiling or orbit fans • Switch buttons - controls the speed of the fan blade § table/desk/box/tower fans • Stand - holds the fan in an upright position § the model or type reference of luminaires § pedestal/stand/floor fans • Base - serves as foundation and keeps the fan stable which may be installed in fans which are § partition/exhaust fans constructed for this purpose; § duct fans § if the fan is intended for mounting in outside windows or walls; § for fans intended to be mounted at high level, that the fans are to be installed so that the Product for Mandatory Certification Fan blade blades are more than 2.3 meters above the floor; • Electric fans are regulated by the Department of Fan motor § that precautions must be taken to avoid the Trade and Industry (DTI). back-flow of gases into the room from the • The DTI-BPS only checks the safety open flue of gas or open-fire appliances. requirements of manual or remote-controlled household electric fans that are 300 watts and Fan guard below with rated voltage being not more than Product Visual Inspection 250V ac, 60Hz, plastic/metal blades. Stand • Manufacturers and importers should apply for a • The DTI-BPS enjoins the consumers to scrutinize Switch the electric fan they buy for product reliability Philippine Standard (PS) license and Import Commodity Clearance (ICC) certificate, Base and safety. • An electric fan shall be marked as the example respectively, before the products are distributed and sold. below: • The DTI Bureau of Product Standards (BPS) acquires a sample of the electric fan for Product Labels Based on PNS IEC 60335-2- inspections and testing based on the Philippine 80:2006 National Standard (PNS) International Electrotechnical Commision (IEC) 60335-2- The following are the required markings on the 80:2000. electric fans based on the PNS IEC 60335-2-80:2006:
Product with the PS or ICC Mark • Brand name
• Name and address of manufacturer/importer • Only manufacturers and importers whose • Nature of supply: AC ( ~ ) products passed the PNS requirements will be • Voltage rating: 230V issued with the PS license and ICC certificate by • Wattage rating the DTI-BPS. • “T” marking: Tropical country • Only manufacturers and importers with valid • Model Number/Type licenses and certificates are allowed to use the • PS mark for locally-produced electric fan PS and ICC marks on their products. • ICC mark for imported electric fan