Académique Documents
Professionnel Documents
Culture Documents
com 1|Page
“A Step by Step SolidWorks Tutorial”
©2012 Jan-Willem Zuyderduyn LearnSolidWorks.com 2|Page
How to model a Peddle in SolidWorks?
In this tutorial you will learn the following features:
Draw a 2d sketch
Extrude
Revolve
Dome
Linear Pattern
Fillet
Chamfer
Create a 2D sketch
Select the Front Plane and create a sketch by clicking on the 2D Sketch icon
Draw the sketch as shown in the picture with 5 lines and 2 splines.
Go to: Insert > Boss/Base > Extrude or click at the Extrude icon
Direction : Blind
Change : into 8 mm
Click OK
Go to: Insert > Features > Fillet/Round or click at the Fillet icon
Click OK
Go to: Insert > Features > Fillet/Round or click at the Fillet icon
Click OK
Select the front surface of Extrude1 and create a sketch by clicking on the 2D Sketch icon
Go to: Insert > Boss/Base > Extrude or click at the Extrude icon
Direction : Blind
Change : into 20 mm
Click OK
Go to: Insert > Features > Fillet/Round or click at the Fillet icon
Click OK
Click OK
Select the new Plane and create a sketch by clicking on the 2D Sketch icon
Go to: Insert > Boss/Base > Revolve or click at the Revolve icon
Click OK
Go to: Insert > Feature > Dome or click at the Dome icon
Click OK
Go to: Insert > Features > Fillet/Round or click at the Fillet icon
Click OK
Go to: Insert > Boss/Base > Extrude or click at the Extrude icon
Direction : Blind
Click OK
Go to: Insert > Features > Chamfer or click at the Chamfer icon
: 16 mm
: 9 mm
Click OK
Go to: Insert > Features > Chamfer or click at the Chamfer icon
: 16 mm
: 7,5 mm
Click OK
Click OK
Select the new Plane1 and create a sketch by clicking on the 2D Sketch icon
Go to: Insert > Boss/Base > Extrude or click at the Extrude icon
Direction : Blind
Click OK
Change into: 20 mm
Number of Instances :4
Click OK
Go to: Insert > Features > Fillet/Round or click at the Fillet icon
Click OK