Académique Documents
Professionnel Documents
Culture Documents
Español- English
1.
Consulte la presentación. ¿Qué va a hacer el router con un paquete que tiene una dirección IP de
destino de 192.168.12.227?
2. ¿Qué dos piezas de información se muestran en la salida del comando show ip interface brief ?
(Elija dos.)
Capa 1 estados
direcciones IP
direcciones MAC
direcciones próximo-hop
descripciones de la interfaz
configuraciones de velocidad y dúplex
3.
end
clockrate 128000
IPv6 enable
no shutdown
4. Cuando un equipo está haciendo ping otro equipo por primera vez, ¿qué tipo de mensaje no se coloque
en la red para determinar la dirección MAC del otro dispositivo?
para proporcionar una ruta para reenviar paquetes para los que no hay una ruta en la tabla de
enrutamiento
para reenviar los paquetes destinados a la red 0.0.0.0 al dispositivo con dirección IP 209.165.200.226
añadir una ruta dinámica para la red de destino 0.0.0.0 a la tabla de enrutamiento
para reenviar todos los paquetes al dispositivo con dirección IP 209.165.200.226
6.
Consulte la presentación. Un administrador de red emite el comando route ipv6 show en R1. ¿Qué dos
tipos de rutas se muestran en la tabla de enrutamiento? (Elija dos.)
7.
Consulte la presentación. Un administrador de red emite el comando show ip route en R2. ¿Qué dos tipos
de rutas se instalan en la tabla de enrutamiento? (Elija dos.)
8. ¿Qué tipo de dirección IPv6 se requiere, como mínimo, en las interfaces habilitadas IPv6?
static
global unicast
link-local
loopback
unique local
9. ¿Qué dirección cambia como un paquete que viaja a través de múltiples saltos de la capa 3 Ethernet a
su destino final?
Cuando un router recibe un paquete, examina la dirección de destino del paquete y se ve en la tabla
de enrutamiento para determinar la mejor ruta a utilizar para enviar el paquete.
11. Un paquete se mueve de un host en una red a un dispositivo en una red remota dentro de la misma
empresa. Si NAT no se realiza en el paquete, que dos elementos permanecen sin cambios durante la
transferencia del paquete desde el origen al destino? (Elija dos.)
12. ¿Qué dos elementos son utilizados por un dispositivo host cuando se realiza una operación AND para
determinar si una dirección de destino está en la misma red local? (Elija dos.)
13. Un administrador de red configura la interfaz Fa0 / 0 en el router R1 con la dirección de comando ip
172.16.1.254 255.255.255.0. Sin embargo, cuando el administrador emite el comando show ip route, la
tabla de enrutamiento no muestra la red conectada directamente. ¿Cuál es la posible causa del
problema?
15. ¿Cuál es una característica que distingue a los routers de capa 2 interruptores?
Los routers soportan una variedad de tipos de interfaz. Interruptores normalmente soportan interfaces
Ethernet.
Interruptores utilizan tablas de información para determinar cómo procesar el tráfico de datos. Routers
no.
Interruptores mueven paquetes de una interfaz física a otra. Routers no.
Los routers pueden ser configurados con direcciones IP. Switches no pueden.
16. ¿Qué afirmación describe una ruta que se ha aprendido de forma dinámica?
17. ¿Qué dos afirmaciones describen correctamente los conceptos de distancia administrativa y métrica?
(Elija dos.)
18.
Consulte la presentación. Un administrador de red emite el comando route ipv6 show en R1. ¿Qué dos
conclusiones se pueden extraer de la tabla de enrutamiento? (Elija dos.)
Los paquetes que se destinan a la red 2001: DB8: ACAD: 2 :: / 64 se remitió a Fa0 / 1.
R1 no sabe una ruta a ninguna red remotos.
La interfaz Fa0 / 1 está configurado con la dirección IPv6 2001: DB8: ACAD: A :: 12.
Los paquetes que se destinan a la red 2001: DB8: ACAD: 2 :: 54/128 se transmitió a través de Fa0 / 0.
La red de FF00 :: / 8 se instala a través de un comando de ruta estática.
19.
Colocar las opciones en el orden siguiente:
siguiente salto
red de destino
métrico
- No anotó -
distancia administrativa
timestamp ruta
protocolo fuente ruta
- No anotó -
20. Un administrador de red está implementando protocolos de enrutamiento dinámico para una
empresa. ¿Qué comando puede el tema de administrador en un router para mostrar los protocolos de
enrutamiento compatibles?
Router(config)# ip forward-protocol ?
Router(config)# service ?
Router(config)# ip route ?
Router(config)# router ?
21. A fin de que los paquetes para ser enviados a un destino remoto, ¿qué tres piezas de información se
debe configurar en un host? (Elija tres.)
dirección IP
puerta de enlace predeterminada
máscara de subred
nombre de host
La dirección del servidor DNS
Dirección del servidor DHCP
22.
Consulte la presentación. ¿Cuál es el propósito del campo resaltado en la línea que se muestra desde el
comando show ip route?
23.
Consulte la presentación. PC1 intenta conectarse a File_server1 y envía una petición ARP para obtener
una dirección MAC de destino. ¿Qué dirección MAC se PC1 recibir en el ARP responder?
24. ¿Qué comando se utiliza para configurar una dirección IPv6 en una interfaz del router para que el
router combinar un prefijo de red especificada manualmente con un identificador de interfaz generado
automáticamente?
ipv6 enable
ipv6 address ipv6-address/prefix-length eui-64
ipv6 address ipv6-address/prefix-length link-local
ipv6 address ipv6-address/prefix-length
English
1
What type of IPv6 address is required as a minimum on IPv6 enabled interfaces?
static
global unicast
link-local*
loopback
unique local
2
In order for packets to be sent to a remote destination, what three pieces of information must be
configured on a host? (Choose three.)
default gateway*
hostname
DNS server address
DHCP server address
IP address*
subnet mask*
3
What two pieces of information are displayed in the output of the show ip interface brief command?
(Choose two.)
MAC addresses
Layer 1 statuses*
IP addresses*
next-hop addresses
interface descriptions
speed and duplex settings
4
Place the options in the following order:
next hop
destination network
metric
– not scored –
administrative distance
route timestamp
route source protocol
– not scored –
5
Which two items are used by a host device when performing an ANDing operation to determine if a
destination address is on the same local network? (Choose two.)
6
Refer to the exhibit. A network administrator issues the show ipv6 route command on R1. What two
conclusions can be drawn from the routing table? (Choose two.)
Packets that are destined for the network 2001:DB8:ACAD:2::/64 will be forwarded through Fa0/1.
R1 does not know a route to any remote networks.*
The interface Fa0/1 is configured with IPv6 address 2001:DB8:ACAD:A::12.*
Packets that are destined for the network 2001:DB8:ACAD:2::54/128 will be forwarded through Fa0/0.
The network FF00::/8 is installed through a static route command.
Refer to the exhibit. What is the purpose of the highlighted field in the line that is displayed from
the show ip route command?
8
Which two statements correctly describe the concepts of administrative distance and metric?
(Choose two.)
The metric varies depending which Layer 3 protocol is being routed, such as IP.
A router first installs routes with higher administrative distances.
The value of the administrative distance can not be altered by the network administrator.
Routes with the smallest metric to a destination indicate the best path.*
Administrative distance refers to the trustworthiness of a particular route.*
The metric is always determined based on hop count.
9
What are two functions of a router? (Choose two.)
10
A packet moves from a host on one network to a device on a remote network within the same
company. If NAT is not performed on the packet, which two items remain unchanged during the
transfer of the packet from source to destination? (Choose two.)
11
Refer to the exhibit. PC1 attempts to connect to File_server1 and sends an ARP request to obtain a
destination MAC address. Which MAC address will PC1 receive in the ARP reply?
12
A network administrator configures the interface fa0/0 on the router R1 with the command ip
address 172.16.1.254 255.255.255.0. However, when the administrator issues the command show
ip route, the routing table does not show the directly connected network. What is the possible cause
of the problem?
13
Which command is used to configure an IPv6 address on a router interface so that the router will
combine a manually specified network prefix with an automatically generated interface identifier?
ipv6 enable
ipv6 address ipv6-address/prefix-length eui-64*
ipv6 address ipv6-address/prefix-length link-local
ipv6 address ipv6-address/prefix-length
14
Fill in the blank.
When a router receives a packet, it examines the destination address of the packet and looks in the
” routing ” table to determine the best path to use to forward the packet.
15
A network administrator configures a router by the command ip route 0.0.0.0 0.0.0.0
209.165.200.226. What is the purpose of this command?
to provide a route to forward packets for which there is no route in the routing table*
to forward packets destined for the network 0.0.0.0 to the device with IP address 209.165.200.226
to add a dynamic route for the destination network 0.0.0.0 to the routing table
to forward all packets to the device with IP address 209.165.200.226
16
Refer to the exhibit. A network administrator issues the show ipv6 route command on R1. Which two
types of routes are displayed in the routing table? (Choose two.)
18
Refer to the exhibit. What will the router do with a packet that has a destination IP address of
192.168.12.227?
19
A network administrator is implementing dynamic routing protocols for a company. Which command
can the administrator issue on a router to display the supported routing protocols?
Router(config)# router ?*
Router(config)# ip forward-protocol ?
Router(config)# service ?
Router(config)# ip route ?
20
Refer to the exhibit. A network administrator has configured R1 as shown. When the administrator
checks the status of the serial interface, the interface is shown as being administratively down.
What additional command must be entered on the serial interface of R1 to bring the interface up?
no shutdown*
end
clockrate 128000
IPv6 enable
21
What is one feature that distinguishes routers from Layer 2 switches?
Switches use tables of information to determine how to process data traffic. Routers do not.
Switches move packets from one physical interface to another. Routers do not.
Routers support a variety of interface types. Switches typically support Ethernet interfaces.*
Routers can be configured with IP addresses. Switches cannot.
22
Which statement describes a route that has been learned dynamically?
23
Refer to the exhibit. A network administrator issues the show ip route command on R2. What two
types of routes are installed in the routing table? (Choose two.)
24
When a computer is pinging another computer for the first time, what type of message does it place
on the network to determine the MAC address of the other device?
1. ¿Qué tres comandos IOS de solución de problemas puede ayudar a aislar problemas con una ruta
estática? (Elija tres.)
ping
show ip route
show ip interface brief
tracert
show arp
show version
2. Una empresa tiene varias redes con los requisitos siguientes de direcciones IP:
IP phones – 50
PCs – 70
IP cameras – 10
wireless access points – 10
network printers – 10
network scanners – 2
¿Qué bloque de direcciones sería la mínima para albergar a todos estos dispositivos si cada tipo de
dispositivo estaba en su propia red?
172.16.0.0/23
172.16.0.0/24
172.16.0.0/22
172.16.0.0/25
3.
Consulte la presentación. ¿Qué comando se usaría para configurar una ruta estática en R1 para que el
tráfico de las dos redes de área local puede llegar al 2001: db8: 1: 4 :: / 64 red remota?
5.
Consulte la presentación. El administrador de red debe configurar una ruta por defecto en el router
frontera. ¿Qué comando utilizaría al administrador configurar una ruta predeterminada que requerirá la
menor cantidad de procesamiento del router al reenviar paquetes?
6. ¿Qué tipo de ruta estática que está configurado en un router utiliza sólo la interfaz de salida?
7. ¿Qué tipo de ruta permite un router para enviar paquetes a pesar de que en su tabla de enrutamiento
no contiene una ruta específica para la red de destino?
8. Abra la Actividad PT. Realizar las tareas en las instrucciones de la actividad y luego responder a la
pregunta.
Qué IPv6 ruta estática se puede configurar en el router R1 para hacer una red completamente
convergente?
9. ¿Por qué una ruta estática flotante puede configurarse con una distancia administrativa que es mayor
que la distancia administrativa de un protocolo de enrutamiento dinámico que se ejecuta en el mismo
router?
10. ¿Cuál sería la mejor ruta de resumen para las siguientes redes?
10.50.168.0/23
10.50.170.0/23
10.50.172.0/23
10.50.174.0/24
10.50.168.0/21
11.
Abra la actividad PT. Realizar las tareas en las instrucciones de la actividad y luego responder a la
pregunta. ¿Cuál es el nombre del servidor Web que se muestra en la página web?
Webserver10
Main-Webserver
WWW-Server
MNSRV
12.
Consulte el gráfico. ¿Qué comando se usaría en el router A para configurar una ruta estática para dirigir
el tráfico de LAN A que está destinado para LAN C?
A(config)# ip route 192.168.3.2 255.255.255.0 192.168.4.0
A(config)# ip route 192.168.5.0 255.255.255.0 192.168.3.2
A(config)# ip route 192.168.3.0 255.255.255.0 192.168.3.1
A(config)# ip route 192.168.4.0 255.255.255.0 192.168.3.2
A(config)# ip route 192.168.4.0 255.255.255.0 192.168.5.2
13. ¿Qué dos afirmaciones describen las direcciones IP con clase? (Elija dos.)
El número de bits utilizados para identificar los anfitriones se fija por la clase de la red.
Todas las subredes en una red son del mismo tamaño.
Sólo direcciones Clase A pueden ser representados por los bits de orden superior 100.
Tres de las cinco clases de direcciones están reservadas para multidifusión y uso experimental.
Hasta 24 bits pueden compensar la porción de host de una dirección Clase C.
Es posible determinar qué clase pertenece a una dirección mediante la lectura de la primera bit.
14.
Consulte la presentación. La pequeña empresa de muestra utiliza el enrutamiento estático. Los usuarios
de la LAN R2 han informado de un problema con la conectividad. Cual es el problema?
15. El administrador de la red configura el router con el comando ip route 172.16.1.0 255.255.255.0
172.16.2.2. ¿Cómo va aparecer esta ruta en la tabla de enrutamiento?
S 172.16.1.0 is directly connected, Serial0/0
S 172.16.1.0 [1/0] via 172.16.2.2
C 172.16.1.0 [1/0] via 172.16.2.2
C 172.16.1.0 is directly connected, Serial0/0
16. ¿Qué sucede con una entrada de ruta estática en una tabla de enrutamiento cuando la interfaz de
salida no está disponible?
17.
18. ¿Cuáles son las dos ventajas de enrutamiento estático sobre el enrutamiento dinámico? (Elija dos.)
19.
Consulte la presentación. ¿Cuál es la mejor manera para que PC A y PC B se comuniquen con éxito con
los sitios en Internet?
Configurar una ruta predeterminada desde R1 a ISP y una ruta estática en ISP a R1.
Configurar una ruta estática de R1 a ISP y una ruta dinámica del ISP para R1.
Configurar un protocolo de enrutamiento entre R1 y ISP y anunciar todas las rutas.
Configurar una ruta dinámica desde R1 a ISP y una ruta estática en ISP a R1.
20.
Consulte la presentación. El ingeniero de red para la empresa que se muestra quiere utilizar la ISP
connection primaria para toda la conectividad externa. La copia de seguridad de la ISP connection sólo
se utiliza si la conexión ISP principal falla. ¿Qué conjunto de comandos sería para lograr este objetivo?
21.
Consulte la presentación. ¿Qué dos comandos cambiará la dirección del siguiente salto para la red
10.0.0.0/8 de 172.16.40.2 a 192.168.1.2? (Elija dos.)
22.
¿Cuál es una ruta de resumen válida para redes IPv6 2001:0DB8:ACAD:4::/64, 2001:0DB8:ACAD:5::/64,
2001:0DB8:ACAD:6::/64, y 2001:0DB8:ACAD:7::/64?
2001:0DB8:ACAD:0004::/62
2001:0DB8:ACAD:0000::/63
2001:0DB8:ACAD:0000::/64
2001:0DB8:ACAD:0004::/63
English
1
What are two advantages of static routing over dynamic routing? (Choose two.)
Static routing is more secure because it does not advertise over the network.*
Static routing is relatively easy to configure for large networks.
Static routing requires very little knowledge of the network for correct implementation.
Static routing uses fewer router resources than dynamic routing.*
Static routing scales well with expanding networks.
2
Refer to the exhibit. Which is the best way for PC A and PC B to successfully communicate with sites
on the Internet?
Configure a default route from R1 to ISP and a static route from ISP to R1.*
Configure a static route from R1 to ISP and a dynamic route from ISP to R1.
Configure a routing protocol between R1 and ISP and advertise all the routes.
Configure a dynamic route from R1 to ISP and a static route from ISP to R1.
Refer to the exhibit. The small company shown uses static routing. Users on the R2 LAN have
reported a problem with connectivity. What is the issue?
4
Refer to the exhibit. The network engineer for the company that is shown wants to use the primary
ISP connection for all external connectivity. The backup ISP connection is used only if the primary
ISP connection fails. Which set of commands would accomplish this goal?
5
What type of route allows a router to forward packets even though its routing table contains no
specific route to the destination network?
generic route
destination route
dynamic route
default route*
Refer to the graphic. Which command would be used on router A to configure a static route to direct
traffic from LAN A that is destined for LAN C?
A(config)# ip route 192.168.3.2 255.255.255.0 192.168.4.0
A(config)# ip route 192.168.5.0 255.255.255.0 192.168.3.2
A(config)# ip route 192.168.3.0 255.255.255.0 192.168.3.1
A(config)# ip route 192.168.4.0 255.255.255.0 192.168.3.2*
A(config)# ip route 192.168.4.0 255.255.255.0 192.168.5.2
7
The network administrator configures the router with the ip route 172.16.1.0 255.255.255.0
172.16.2.2 command. How will this route appear in the routing table?
Refer to the exhibit. The network administrator needs to configure a default route on the Border
router. Which command would the administrator use to configure a default route that will require
the least amount of router processing when forwarding packets?
9
Why would a floating static route be configured with an administrative distance that is higher than
the administrative distance of a dynamic routing protocol that is running on the same router?
10
Refer to the exhibit. What command would be used to configure a static route on R1 so that traffic
from both LANs can reach the 2001:db8:1:4::/64 remote network?
11
Refer to the exhibit. Which default static route command would allow R1 to potentially reach all
unknown networks on the Internet?
12
Which two statements describe classful IP addresses? (Choose two.)
13
A company has several networks with the following IP address requirements:
IP phones – 50
PCs – 70
IP cameras – 10
wireless access points – 10
network printers – 10
network scanners – 2
Which block of addresses would be the minimum to accommodate all of these devices if each type of
device was on its own network?
172.16.0.0/23
172.16.0.0/24*
172.16.0.0/22
172.16.0.0/25
14
What does VLSM allow a network administrator to do?
15
What would be the best summary route for the following networks?
10.50.168.0/23
10.50.170.0/23
10.50.172.0/23
10.50.174.0/24
10.50.160.0/22
10.50.164.0/23
10.50.168.0/16
10.50.168.0/21*
10.50.168.0/22
10.50.168.0/23
16
What is a valid summary route for IPv6 networks 2001:0DB8:ACAD:4::/64, 2001:0DB8:ACAD:5::/64,
2001:0DB8:ACAD:6::/64, and 2001:0DB8:ACAD:7::/64?
2001:0DB8:ACAD:0000::/63
2001:0DB8:ACAD:0000::/64
2001:0DB8:ACAD:0004::/62*
2001:0DB8:ACAD:0004::/63
17
Which type of static route that is configured on a router uses only the exit interface?
18
Which three IOS troubleshooting commands can help to isolate problems with a static route? (Choose
three.)
show ip route*
show ip interface brief*
ping*
tracert
show arp
show version
19
Refer to the exhibit. What two commands will change the next-hop address for the 10.0.0.0/8
network from 172.16.40.2 to 192.168.1.2? (Choose two.)
20
What happens to a static route entry in a routing table when the outgoing interface is not available?
21
Launch PT Hide and Save PT
Open the PT activity. Perform the tasks in the activity instructions and then answer the question.
What is the name of the web server that is displayed in the webpage?
Webserver10*
Main-Webserver
WWW-Server
MNSRV
22
What IPv6 static route can be configured on router R1 to make a fully converged network?
Español- English
1. ¿Qué dos afirmaciones son ciertas respecto a protocolos de enrutamiento sin clase? (Elija dos.)
2.
Consulte la presentación. OSPF se utiliza en la red. ¿Qué camino se elegirá por OSPF para enviar
paquetes de datos desde la A a la Net Net B?
3.
Consulte la presentación. Sobre la base de la salida parcial del comando show ip route, ¿qué dos hechos
se puede determinar sobre el protocolo de enrutamiento RIP? (Elija dos.)
permite a un router para enviar actualizaciones de enrutamiento en una interfaz, pero no recibe las
actualizaciones a través de ese innterface
permite que las interfaces para compartir direcciones IP
permite a un router para recibir actualizaciones de enrutamiento en una interfaz, pero no envía
actualizaciones a través de la interfaz
permite una interfaz permanezca sin recibir keepalives
permite un protocolo de enrutamiento que transmita actualizaciones fuera una interfaz que está
faltando a su dirección IP
7. ¿Qué dos eventos se activará el envío de un paquete de estado de enlace por un estado de enlace?
(Elija dos.)
el requisito para inundar periódicamente paquetes de estado de enlace a todos los vecinos
un cambio en la topología
la puesta en marcha inicial del proceso de protocolo de enrutamiento
el temporizador de actualización del router que expira
un enlace a un router vecino se ha convertido congestionada
El comando versión 2 se utiliza en el modo de configuración del router RIP para permitir el envío de las
máscaras de subred con las actualizaciones de enrutamiento.
9. ¿Qué dos acciones son el resultado de introducir el comando 192.168.1.0 red en modo de
configuración RIP en un router? (Elija dos.)
10.¿Qué dos tareas se desempeñan los protocolos de enrutamiento dinámico? (Elija dos.)
detección de redes
descubrir hosts
propagar entradas de defecto de acogida
asignar direcciones IP
actualizar y mantener las tablas de enrutamiento
11.
12.
13.
Consulte la presentación. Qué interfaz será la interfaz de salida para enviar un paquete de datos con el
destino dirección IP 172.16.0.66?
Serial0/0/0
Serial0/0/1
GigabitEthernet0/0
GigabitEthernet0/1
14. ¿Qué ruta es la mejor combinación para un paquete de entrar en un router con una dirección de
destino de 10.16.0.2?
15.
Al configurar RIPng, la información predeterminada origina un comando que indica al router propagar
una ruta estática por defecto.
17. ¿ Qué es diferente entre entradas de la tabla de enrutamiento IPv6 en comparación con entradas de
la tabla de enrutamiento IPv4?
IPv6 no utiliza rutas estáticas para rellenar la tabla de enrutamiento que se utiliza en IPv4.
La selección de rutas IPv6 se basa en el prefijo de juego más corto, a diferencia de la selección de ruta
IPv4 que se basa en el prefijo más largo que concuerde.
Tablas de enrutamiento IPv6 incluyen entradas de rutas locales que las tablas de enrutamiento IPv4 no lo
hacen.
Por diseño IPv6 es sin clases por lo que todas las rutas son efectivamente de nivel 1 rutas finales.
18. ¿Qué dos requisitos son necesarios antes que un router configurado con un estado de enlace pueda
construir y enviar sus paquetes de estado de enlace? (Elija dos.)
El router ha construido un árbol SPF.
El router ha construido su base de datos de estado de enlace.
El router ha establecido sus adyacencias.
El router ha determinado los costos asociados con sus enlaces activos.
La tabla de enrutamiento se ha actualizado.
19. ¿Qué protocolo de enrutamiento dinámico fue desarrollado como un protocolo de pasarela exterior
para interconectar diferentes proveedores de Internet?
OSPF
EIGRP
DEP
BGP
20. ¿ Qué dos requisitos se utilizan para determinar si una ruta puede ser considerada como una ruta
final en la tabla de enrutamiento de un router? (Elija dos.)
contener subredes
contener una dirección IP del siguiente salto
contener una interfaz de salida
ser una ruta por defecto
ser una entrada de red con clase
21. Una ruta de destino en la tabla de enrutamiento se indica con un código D. ¿Qué tipo de entrada de
ruta es esta?
22. ¿Qué ruta usará un router para reenviar un paquete IPv4 después de examinar su tabla de
enrutamiento para el mejor partido con la dirección de destino?
1
What is the purpose of the passive-interface command?
2
What two tasks do dynamic routing protocols perform? (Choose two.)
assign IP addressing
network discovery*
propagate host default gateways
update and maintain routing tables*
discover hosts
3
Fill in the blank. Do not abbreviate the answer.
The command “version 2” is used in RIP router configuration mode to enable the sending of subnet
masks with the routing updates.
Refer to the exhibit. OSPF is used in the network. Which path will be chosen by OSPF to send data
packets from Net A to Net B?
5
Which two statements are true regarding classless routing protocols? (Choose two.)
6
What two actions result from entering the network 192.168.1.0 command in RIP configuration mode
on a router? (Choose two.)
Refer to the exhibit. Based on the partial output from the show ip route command, what two facts
can be determined about the RIP routing protocol? (Choose two.)
The command no auto-summary has been used on the RIP neighbor router.*
RIP version 1 is running on this router and its RIP neighbor.
RIP will advertise two networks to its neighbor.
The metric to the network 172.16.0.0 is 120.
RIP version 2 is running on this router and its RIP neighbor.*
8
9
In the context of routing protocols, what is a definition for time to convergence?
the capability to transport data, video, and voice over the same media
the amount of time for the routing tables to achieve a consistent state after a topology change*
a measure of protocol configuration complexity
the amount of time a network administrator needs to configure a routing protocol in a small- to medium-
sized network
10
Fill in the blank. Do not abbreviate.
When configuring RIPng, the ” default-information originate ” command instructs the router to
propagate a static default route.
11
A destination route in the routing table is indicated with a code D. Which kind of route entry is this?
12
Refer to the exhibit. Which interface will be the exit interface to forward a data packet with the
destination IP address 172.16.0.66?
Serial0/0/0
Serial0/0/1*
GigabitEthernet0/0
GigabitEthernet0/1
13
Which route is the best match for a packet entering a router with a destination address of
10.16.0.2?
14
Which two requirements are necessary before a router configured with a link-state routing protocol
can build and send its link-state packets? (Choose two.)
The router has determined the costs associated with its active links.*
The router has constructed an SPF tree.
The router has established its adjacencies.*
The routing table has been refreshed.
The router has built its link-state database.
15
Which two requirements are used to determine if a route can be considered as an ultimate route in
a router’s routing table? (Choose two.)
16
What is different between IPv6 routing table entries compared to IPv4 routing table entries?
By design IPv6 is classless so all routes are effectively level 1 ultimate routes.*
IPv6 does not use static routes to populate the routing table as used in IPv4.
IPv6 routing tables include local route entries which IPv4 routing tables do not.
The selection of IPv6 routes is based on the shortest matching prefix, unlike IPv4 route selection which is
based on the longest matching prefix.
17
Which dynamic routing protocol was developed as an exterior gateway protocol to interconnect
different Internet providers?
RIP
OSPF
EIGRP
BGP*
18
Which route will a router use to forward an IPv4 packet after examining its routing table for the best
match with the destination address?
19
Which two statements describe the OSPF routing protocol? (Choose two.)
20
Which two events will trigger the sending of a link-state packet by a link-state routing protocol?
(Choose two.)
22