Académique Documents
Professionnel Documents
Culture Documents
1 Confidential
- Main Section -
MS-1 Main Section Disassembly Except 1seg Tuner / Wireless WAN Model 2 [MA]
UX Series
1.MS-1-D.2 Confidential
Battery Pack
1) 2)
Lever
Turn over the main unit, and slide the lever in the direction of
the arrow to release the lock. In the state of 1), remove the Battery Pack in the direction of the arrow.
UX Series
1.MS-1-D.3 Confidential
1)
Cap(Stick Pointer)
Remark
J Model
3 [MA]
C Model
Stylus
Dummy Card
UX Series
1.MS-1-D.4 Confidential
Housing (Bottom)
1) 2)
Cover (Bottom Screw) Screw: Blue-B6 / Green-B7 / Red-B8
While disengaging the detent (two places), remove the Cover. Remove the six screws.
3)
Housing (Bottom)
Cover (Bottom)
Remove the two screws. While disengaging the detent (three places), remove the Cover.
3) 1 [ADD]
Screw: B1
Attachment
1)
HDD Model Flash Memory Model
Sheet(Bottom)
Kapton Tape
Tape(Harness)
Tape(Harness)
Tape(Harness)
Peel off the Tape. 4 [ADD]
*HDD Model - Tape (one place), Kapton Tape(One place)
Flash Memory Model -Tape (Two places)
UX Series
1.MS-1-D.7 Confidential
Disconnect the Antenna (one place) and the terminal of the Coaxial
Remove the one screw and then the Wireless LAN Card.
Cable (two places) vertically.
UX Series
1.MS-1-D.8 Confidential
3 [MA]
1)
Screw: B1
Bracket (HDD)
2)
Lock Lever
HDD
FPC
1)
Cushion (HDD)
HDD
UX Series
1.MS-1-D.9(a) Confidential
1)
Screw:B1
2)
SSD
FPC
Lock Lever
1) 2)
SSD
Screw:B2
Bracket(MT R)
Bracket(MT F)
UX Series
1.MS-1-D.10 Confidential
Lock Lever
Keyboard ASSY
1. Turn over the Keyboard ASSY and the Sheet (one place).
2. Disengage the detent (two places) and remove the Bracket. Disengage the detent (six places) and remove the Cover.
UX Series
1.MS-1-D.11 Confidential
Mother Board
1) 2)
Microphone
Connector
Mother Board
FPC *1
While releasing the connectors and disconnecting the FPC,
remove the Mother Board.
Remove the Microphone.
*1: The FPC is connected to the Mother Board.
UX Series
1.MS-1-D.12 Confidential
Peel off the Cover (two places). Remove the two screws.
3) 4)
Screw: B14
Palmrest
Bracket (SWX R)
LCD
UX Series