Académique Documents
Professionnel Documents
Culture Documents
I. IDENTIFICATION (20)
1. It refers to the resistance to the flow of heat due to dirt or scale build-up.
2. These promote high velocities and more efficient cross flow on the outsides of the tubes.
3. TEMA stands for ____________________________.
4. Equipment in which the hot and cold fluids do not come into direct contact by having separate passages.
5. Type of condensation where the condensate wets the surface and flows on the surface.
6. Condenser wherein the vapor enters at the bottom and flows upwards inside the tubes.
7. For the stratified flow model, the condensate film coefficient can be estimated from the what equation?
8. Above a Reynolds number of ___, waves on the condensate film become important.
V. ENUMERATION (35)
1 – 4. Types of Heat Exchanger
Prepared by: CRUZ, DACAIMAT, PEDROSA, SIM, & VELASCO
5 – 12. Major factors that can influence the cost for heat-transfer equipment
13 - 19. Factors to consider in designing condensers
IDENTIFICATION (20)
1. Fouling factor
2. Baffles
3. Tubular Exchanger Manufacturers Association
4. Heat Exchanger
5. Film condensation
6. Upflow vertical condenser/upflow condenser
7. Nusselt
8. 30 (thirty)
ENUMERATION (35)
1. Shell-and-Tube Heat Exchanger
2. Hairpin/ Double-Pipe Heat Exchanger
3. Air-Cooled Heat Exchanger
4. Plate-and-Frame Heat Exchanger
Prepared by: CRUZ, DACAIMAT, PEDROSA, SIM, & VELASCO
5. Heat-transfer area
6. Tube diameter and gauge
7. Tube length
8. Pressure
9. Materials of construction for tubes and shell
10. Degree and type of baffling
11. Supports, auxiliaries, and installation
12. Special features
13. Properties of Fluid to be Processed
14. Design Pressure and Temperature
15. Flow Path Arrangement
16. Shell and Tube Dimensions
17. Number of Tubes to be Used
18. Corrosion/ Fouling and Scaling Factors
19. Materials of Construction