Académique Documents
Professionnel Documents
Culture Documents
Date
of
Checked by Approved by
Subject
_
Building
Check of service stress in tension bars to control crack width according to ACI 350-06
Exposure: Normal
Exposure to liquids with a pH greater than 5, or exposure to sulfate solutions of 1000
ppm or less.
Construction: Two way
MATERIAL PROPERTIES
Concrete Cylinder Compressive Strength (f'c) = 350 Kg/cm2
Reinforcement Yield Strength (fy) = 4200 Kg/cm2 n (Es/Ec) = 7.21
SECTION PROPERTIES d ’
X
Width (b) = 100 cm A s’
Thickness (t) = 35 cm
t d
REINFORCEMENT
Tension steel cover to steel C.G. (C) = 6.25 cm A s
Clear cover from the nearest surface in tension to the
= 5 cm C
surface of flexural reinforcement (cc)
b s s /n
Compression Steel Cover (d') = 6.25 cm
Tension Steel (As) = 20 cm2/m'
Spacing of bars in first layer of tension steel = 20 cm
s,first layer, max = min. of: 17 inch = 42.4 cm Eq. 10-7, ACI 350-06 & Eq. 10-4, ACI 318-02
& 12 inch = 30.5 cm Clause. 10.6.5, ACI 350-06
& 17 inch = 43.9 cm Clause. 10.6.4, ACI 318-02
hence, s, max = 30.5 cm
STRAINING ACTIONS
Applied Service Moment (MS) = 9.2 m.t.
Normal Force (NS) = 0 t
Eccentricity (e) = 0.00 m.
CHECK OF STRESSES
Tension Steel Stress (fs) = 1757 Kg/cm2 = 0.4182 fy Ok, <= 1787 Kg/cm2
Applied tensile stresses / allowable tensile stresses = 0.98
Compression Steel Stress (fs') = 119 Kg/cm2
ACI-CRK - Rev. 2
ACI-CRK - Rev. 2
ACI-CRK - Rev. 2