Académique Documents
Professionnel Documents
Culture Documents
Ficha Técnica
Technical Product Data Sheet FT-ST-23/11 Rev. 0
DESCRIPCIÓN DEL PRODUCTO / PRODUCT DESCRIPTION
Producto
Product Name Lona Duroplast Grabado
Engraving Charol – Charol
GENERALIDADES / GENERAL INFORMATION
Película elaborada con resina de cloruro de polivinilo (PVC) Polyvinyl chloride film (PVC), supported on textile 12 x 12 1000
soportada en textil 12 x 12 1000 D, diseñada especialmente D. Specially designed for outdoor uses.
para exteriores.
It contains ultraviolet absorber, flame retardant antibacterial-
Cuenta con absorbedor de luz ultravioleta, retardante a la flama antifungal treatment, which makes it resistant to weatherability.
y tratamiento antihongos, lo cual le hace resistente a las Its formulation allows it to have a good performance in hot and
inclemencias del tiempo. Su formulación le permite cold temperatures.
desempeñarse en ambientes de altas y bajas temperaturas.
Its excellent physical and mechanical proprieties make it one of
Las excelentes propiedades físicas y mecánicas la convierten the most versatile materials.
en uno de los materiales más versátiles.
Non toxic and heavy metals free.
Material atoxico y libre de metales pesados.
Tratamiento UV Tratamiento Antiflama Tratamiento Antihongos
UV Resistant Flame Resistance Bacterial & Mildew Resistant
PRESENTACIÓN / PRESENTATION
Valores Referenciales
Característica Método de Prueba
UM (Referential Values)
(Characteristic) (Test Method)
P (Warp) T (Weft)
Resistencia a la Tensión kgf 163 190
ASTM D751–00
Tensile Strength lbf 360 420
Elongación
Elongation
ASTM D751–00 % 40 40
Resistencia al Rasgado kgf 41 32
ASTM D751–00
Tearing Strength lbf 90 70
Adhesión kgf Sin desprendimiento
ASTM D751–00
Adhesion lbf No peeling
Flamabilidad
Flame Resistance (BR)
FMMVSS mm / min < 80 Pasa
Resistencia a Bajas Temperaturas
CFFA-6B
Cold Crack Resistance (-23ºC, 2 h)
Notas.
Los valores típicos contemplan una variación respecto a los valores referenciales de +/- 15% resistencia a la tensión y rasgado, +/- 20% elongación.
Las pruebas de laboratorio han sido realizadas como información para nuestros clientes y no representan garantía alguna, el cliente deberá determinar, antes de su uso, la conveniencia de este material para su propósito especifico. (Los datos
representan promedios y no se piensan para el uso como especificación)
Los valores aquí mostrados pueden sufrir modificaciones sin previo aviso.
Notes.
The typical values should consider a variation related to the referential values of +/- 15% in Tensile and Tearing Strength, +/- 20 % elongation.
The laboratory tests have been made as information for our clients and do not constitute a warranty. The purchaser should independently determine, prior to use, the suitability of this material for his specific purpose. (Data represents averages
and is not intended for use as a specification).
The values here shown could be modified without previous warning.
CIRCUITO DR. GUSTAVO BAZ 9, FRACC. EL PEDREGAL, CD. LOPEZ MATEOS, ATIZAPAN 52948, EDO. DE MEXICO
CONMUTADOR (52) 5824-1125 VENTAS (52) 5822-0528, 5824-1000 FAX (52) 5824-0750 e-mail: info@piessa.com www.piessa.com