Académique Documents
Professionnel Documents
Culture Documents
Project identification
Quantity: 3
Denomination: ZR275-8,6-50/E
Unique product number: Subunit p/n:
Product group code: Basic p/n:
Sales company
Proposal engineer: LUIS MORALES
Project reference:
Delivery information
Penalties
No penalties
http://ipd.atlascopco.be/atlas/ct/aif/CustDes.nsf/0/6F2B342256B00A84C12575EF003... 10-07-2009
Página 2 de 6
http://ipd.atlascopco.be/atlas/ct/aif/CustDes.nsf/0/6F2B342256B00A84C12575EF003... 10-07-2009
Página 3 de 6
Electrics
Electrical cubicle: excluding starter for main drive
Regulation - elektronikon
Voltage: 230 V Frequency: 50 Hz
Supply voltage for control voltage or auxiliary voltage: 500 V
First language: Spanish
Second language: English
http://ipd.atlascopco.be/atlas/ct/aif/CustDes.nsf/0/6F2B342256B00A84C12575EF003... 10-07-2009
Página 4 de 6
Solenoid valve
Voltage: 24 V Frequency: 50 Hz
Special electrical items - additional information
Amp/unit
. Auxiliary circuit for motor heaters (included in standard option)
. AIE3 module for read-out, pre-alarm and tripping of PT100's in
motor windings and bearings.
. IMPORTANT REMARK : supply voltage for control voltage to be
sourced from main motor supply. If not possible, please use
contact of undervoltage relay as availability check of main
power supply.
Performance test
Amp/unit
. Performance test certificate at AML reference condition.
Type of test: Special
Test code: ISO 1217 Ed. 3 Annex C
Drive for test: Job Motor
Drive for test voltage: High
Documentation
AIB: Standard Quantity: 01
Language: ENGLISH
ASL: Addendum Quantity: 01
Language: ENGLISH + GLOSSARY
Additional documentation
Amp/unit
. Dimension drawing, P&I diagram and electrical service diagram in
electronic (.DXF) format.
Packing
Specification: AC Standard
Dimensions: NON Standard
Weight: NON Standard
Shipping instructions
Final destination: CHILI
Instructions:
To be advised by the sales company.
EC mark
No EC mark
IMPORTANT_REMARKS
http://ipd.atlascopco.be/atlas/ct/aif/CustDes.nsf/0/6F2B342256B00A84C12575EF003... 10-07-2009
Página 5 de 6
A. SCOPE OF SUPPLY
This document confirms the Scope of Supply requested by the Customer Centre.
Please contact CustomDesign immediately if any items are missing and make sure that -apart from the machine scope- all
required documentation is mentioned as well as it may be difficult to obtain e.g. certain certificates later on.
D. DRAWINGS
All offered/submitted drawings are available in English only and use the APC symbols. CustomDesign uses following drawing
type definitions on proposal/contract description (make sure to check proposal/contract description versus your customer
order):
1) Dimension drawing / Service diagram / P&I diagram as dxf file (no extra price)
>>> = standard APC drawing + added special items
2) As built drawings (have extra price)
>>> = item 1) but items not in scope of supply removed
3) Customised drawings (extra price at cost)
>>> = item 2) + additional customer requirements such as e.g. customer title block or tag numbers etc...
Drawings are available (unless otherwise stated) at time of ‘Engineering release’ which is indicated on Contract Descriptions
and in the production status follow up web page in IPD/Status.
E. HANDBOOKS
On the contract/proposal description you can find 3 different types of handbooks:
1) the standard handbook (= handbook of the standard product): in this case the standard handbook will be made available
in IPD/Documentation
2) AIB and/or ASL addendum: in this case the standard handbook will be amended with an addendum. Both the standard
handbook and the addendum will be integrated into one file which will be made available in IPD/Documentation
3) Special AIB and/or ASL: due to special nature of the order it can be that the use of an addendum is not practical. In that
case a special AIB or ASL will be issued in IPD/Documentation. This is a tailor made handbook.
CustomDesign Ex Factory issued handbooks are by default made in English language and are made available with the
machine delivery Ex Works Airpower.
It is a Customer Centre responsibility to translate into local language before commissioning of the unit if legally or
contractually required.
However -on specific Customer Centre request- CustomDesign can include a translation of the AIB in the project scope of
supply and the translation cost in the unit AMP price. The translation requirement will then be mentioned on the
proposal/contract description (more information on this can be found in the IPD Catalog).
Addenda to AIB and ASL will be issued as separate identifiable parts of the handbook.
F. ORDER PLACEMENT
All orders should be placed by means of the ORDER FORM followed by entry in the system and all this according the Order
Placement procedure which can be found in the IPD Catalog.
H. ORDERING OF PARTS
The release of the order form by the Customer Centre will trigger Airpower purchase orders to sub-suppliers for long lead
time items (e.g. electric motors). It is important that the Customer Centre is aware of this as any change in the order scope
of supply might cause cancellation cost being imposed as from day one after order placement.
For free issued electric motors a special form should be completed latest at date of order placement. This form includes all
relevant electrical and mechanical data such as: construction form-regreasing interval-balancing-rated electrical data-torque
and current curves-thermal withstand curve-etc.
This form (‘Required information for non standard electric motors.xls’) can be found in the IPD Catalog.
J. PERFORMANCE DATA
Performance data stated are (unless otherwise stated) to be considered valid for a new machine. This means a machine with
clean coolers and with pure water as cooling medium if water cooled (e.g. without glycol).
Possible deviation of compressor performance data stated due to e.g. fouling or the use of glycol in cooling water or additional
inlet filters or ducting etc. should be taken into account when sizing equipment for installation downstream the compressor.
K. PRICING
http://ipd.atlascopco.be/atlas/ct/aif/CustDes.nsf/0/6F2B342256B00A84C12575EF003... 10-07-2009
Página 6 de 6
Stated AMP prices are valid according the stated commercial terms and for maximum 3 months in case of proposal.
Stated AMP prices are valid according the stated commercial terms for contracts.
We reserve the right however to adapt both proposal and contract AMP prices in case of very strong price fluctuations of raw
materials. We advise the Sales Companies to include such a clause as well in their offers and contracts with end customers or
contractors.
http://ipd.atlascopco.be/atlas/ct/aif/CustDes.nsf/0/6F2B342256B00A84C12575EF003... 10-07-2009