Académique Documents
Professionnel Documents
Culture Documents
All in One Solution Based on Universal Switch and SDH-like O&M without complicated photonic layer design such as
Transport wavelength planning and OSNR calculating, with less patch cords
and fiber operations, time to market greatly reduced.
Unique architecture that integrates PCM, TDM, Ethernet, WDM and
MPLS-TP technology. 50% footprint saving and 50% power consumption reduction.
Product overview
The Huawei OptiX OSN 580 is a new-generation universal transport platform. It adopts a unified switching architecture and supports any mix of
traffic, from all-circuit to all-packet. The OSN 580 offers a converged, reliable and cost-efficient transport platform to meet the needs of mission-
critical applications such as control and monitor energy and distribution grids, gas and oil pipelines, railways and authorities.
Applications
The OSN 580 provides reliable and flexible transmission of real-time and critical services using high-efficiency soft pipe and high-quality hard pipe.
•• Small Size, Large Capacity: 2U height, 64G Packet / 20G TDM universal switch
•• Converge L0/L1/L2: Ethernet/MPLS-TP, TDM and WDM. One platform provides
both soft- and hard-pipe functionality
•• Converge Next-Generation PCM/MUX: Evolving network with low-speed
interfaces
•• Converge MPLS-TP: Simplifies large-scale packet-switched networks
•• High operating temperature: up to 65℃
Product overview
The Huawei OptiX OSN 550 is a compact, easy to operate universal transport platform. The OSN 550 offers a converged, reliable and cost-
efficient transport platform to meet the needs of mission-critical applications such as control and monitor energy and distribution grids, gas
and oil pipelines, railways and authorities
All-in-One Solution
Reduces stacking of different devices, simplifying network layers
With universal transport platform that support all applications, easy
to expand and evolve
PCM Board
Unified management, end-to-end service configuration, and easy
troubleshooting
MPLS-TP for Highly Efficient and Highly Available TP-Assist for Easy O&M
Packet Transport MPLS-TP based O&M solution ‘TP-Assist’ providing efficient
Guaranteed Performance from end-to-end committed bandwidth planning, fast deployment and simple maintenance, making the
mechanism. large-scale packet network easily manageable
99.999% availability: 50ms recovery for both linear and ring Traffic based crystal clear O&M is supported with visual network-
applications. level view, graphical format to display end-to-end service
configuration, performance and status.
SDH-like OAM mechanism for quick fault detection, troubleshooting
and end-to-end performance monitoring. Better maintenance experience even than SDH: visualized end-to-
end bandwidth management, intelligently locating 92% failure,
analyzable and predicable network management
Flexible installation
1U high box
Industrial Certifications Ensure Reliable Operation
Fitting 19/23’ rack, outside cabinet, wall, desk and pole mounting.
Compliant with EN 50121-4, IEC 61850-3, IEC 61000-6-5, IEEE 1613
AC or DC power supply
Switch capacity Packet: 7.2 Gbit/s and TDM: 21.25 Gbit/s (higher order), 5 Gbit/s (lower order)
LSP/PW OAM:
CC, LB, LT
AIS, RDI
MPLS-TP OAM
LM, DM
OAM
LCK, TST
CSF
Ethernet OAM ETH-CC, ETH-Loopback, ETH-Link Trace, Remote Loopback, Remote Fault Detection, RMON(RFC 2819)
Equipment-level
power 1+1 backup
Protection