Académique Documents
Professionnel Documents
Culture Documents
Measurement
Import
Guide
Version 3.12
www.actix.com
Documentation Version: R-GenMeas-v3.12, June 2009
The content of this manual is provided for information only, is subject to change without notice,
and should not be construed as a commitment by Actix. Actix assumes no responsibility or liability
for any errors or inaccuracies that appear in this documentation.
Trademark Notice
Radioplan is a registered trademark of Actix GmbH in the European Union.
Actix and the Actix logo are trademarks of Actix Ltd.
Microsoft, Windows, Windows NT, Windows 2000, and Windows XP are trademarks or registered
trademarks of the Microsoft Corporation.
All other product or brand names are trademarks or registered trademarks of their respective
holders.
Contact:
Actix GmbH Actix Ltd
Altmarkt 10 200 Hammersmith Road
D-01067 Dresden Hammersmith
Germany London, W6 7DL
tel.: +49 (0) 351 404 29 – 0 United Kingdom
fax: +49 (0) 351 404 29 – 50 www.actix.com
e-mail: sales@actix.com
www.actix.com
www.actix.com
Contents
1 OVERVIEW ................................................................................................5
1.1 INTRODUCTION ................................................................................................ 5
1.2 INSTALLATION ................................................................................................. 5
1.3 OUTLINE OF THIS USER GUIDE .............................................................................. 5
3 ABBREVIATIONS ....................................................................................... 13
4 REFERENCES ........................................................................................... 13
www.actix.com
www.actix.com
Actix Radioplan Generic Measurement Import Guide Overview 5
1 Overview
1.1 Introduction
In addition to the various measurement data import filters supported in Actix Radioplan
(see [R-Meas]), there is also a generic and customizable measurement import filter called
Radioplan Generic Measurement Import. This software plugin to the Actix Radioplan
application is described in the present document.
WiNeS
Filter 1 Platform
Measurement
Module
measurement Filter 2
data import
Filter 3 incl.
Pathloss Tuning Common DB
...
1.2 Installation
In the following, %ApplicationPath% denotes the path where the Actix Radioplan
application is installed (refer to [R-Admin] for more information).
The Radiopan Generic Measurement Import plugin is a DLL in the
%ApplicationPath%\plugins\importresults directory, called RadioplanGeneric.dll .
It can be customized by the corresponding radioplangeneric.ini file, which is located in
the %ApplicationPath%\configuration\plugins\importresults directory of the Actix
Radioplan installation.
However, under Windows Vista, the configuration file is located in the
%APPDATA%\configuration\plugins\rnpintegration\ directory (refer to [R-Admin]).
www.actix.com
Actix Radioplan Generic Measurement Import Guide Overview 6
www.actix.com
Actix Radioplan Generic Measurement Import Guide Generic Data Import 7
By clicking OK, the Measurement Data Import dialog is opened, Fig. 2-2.
Here the corresponding measurement file(s) have to be selected (from a single folder).
This dialog is resizable such that it can be adjusted to view as many measurement files as
possible.
For multiple file selection the <Shift> and <Ctrl> keys can be used – which is useful if
several consecutive measurement files were recorded during a drive test.
www.actix.com
Actix Radioplan Generic Measurement Import Guide Generic Data Import 8
The various parameters of the Measurement Data Import dialog in Fig. 2-2 are explained
in Table 2-1.
www.actix.com
Actix Radioplan Generic Measurement Import Guide Generic Data Import 9
www.actix.com
Actix Radioplan Generic Measurement Import Guide Generic Data Import 10
[General]
FileFormat = 0
Then the Import Specification dialog for the generic text import will appear after selecting
Open in the Measurement Data Import dialog (see Fig. 2-2).
In the Import Specification dialog, Fig. 2-3, the user can select the System Type of the
measurement data to be imported: either UMTS, CDMA, GSM, or iDEN. The header
specification for the measurement data can be defined in the fields below. The following
fields for the header can be defined:
Longitude (in decimal degree format where positive numbers are North)
Latitude (in decimal degree format where positive numbers are East)
CellName (if the cell name is available then this can be used for assigning the
measurements instead of SC/PN/BSIC etc.)
BSIC
SC or PN or ARFCN
RSCP or EC or RXLEV
EcIo or C/I
www.actix.com
Actix Radioplan Generic Measurement Import Guide Generic Data Import 11
The field separators in the measurement data can also be chosen. The possibilities include:
Tabstop, Semicolon, Comma, and Space.
In order to help with setting the header specifications and the field separators, a sample of
the measurement data is given at the bottom of the dialog.
[FORMAT3]
Longitude1 = "Longitude"
Longitude2 = ""
Latitude1 = "Latitude"
Latitude2 = ""
CellName1 = "CellName"
CellName2 = ""
RSCP1 = "Ec"
RSCP2 = "RSCP"
EcIo1 = "EcIo"
EcIo2 = ""
[FORMAT4]
Longitude1 = "Longitude"
Longitude2 = ""
Latitude1 = "Latitude"
Latitude2 = ""
CellName1 = "CellName"
CellName2 = ""
ARFCN1 = "ARFCN"
ARFCN2 = ""
C-I1 = "EcIo"
C-I2 = ""
BSIC1 = "BSIC"
BSIC2 = ""
RxLev1 = "RxLev"
RxLev2 = ""
www.actix.com
Actix Radioplan Generic Measurement Import Guide Generic Data Import 12
[FORMAT5]
Longitude1 = "Longitude"
Longitude2 = ""
Latitude1 = "Latitude"
Latitude2 = ""
CellName1 = "CellName"
CellName2 = ""
EC1 = "Ec"
EC2 = ""
EcIo1 = "EcIo"
EcIo2 = ""
[FORMAT6]
Longitude1 = "Longitude"
Longitude2 = ""
Latitude1 = "Latitude"
Latitude2 = ""
CellName1 = "CellName"
CellName2 = ""
ARFCN1 = "ARFCN"
ARFCN2 = ""
C-I1 = "C/I"
C-I2 = ""
ColorCode1 = "CC"
ColorCode2 = ""
RxLev1 = "RxLev"
RxLev2 = ""
It should be noted that if the file format is set to 3, 4, 5 or 6, then the Import Specification
dialog (see Fig. 2-3) will be skipped.
www.actix.com
Actix Radioplan Generic Measurement Import Guide Abbreviations 13
3 Abbreviations
4 References
[R-Admin] Actix Radioplan. Administration Guide. Version 3.12. Actix GmbH, Dresden,
Germany, June 2009.
[R-Meas] Actix Radioplan. Measurement Guide. Version 3.12. Actix GmbH, Dresden,
Germany, June 2009.
[R-UG] Actix Radioplan. User Guide. Version 3.12. Actix GmbH, Dresden,
Germany, June 2009.
www.actix.com
Actix Radioplan Generic Measurement Import Guide References 14
www.actix.com