Académique Documents
Professionnel Documents
Culture Documents
(OR)
3.a)In the circuit shown in Fig.2, Use the loop analysis to find the power delivered to the 4Ω resistor. (8M)
b) Find the equivalent resistance between the two points A and B shown in Fig.3. (4M)
UNIT – II
4.a) Determine the Thevenin’s equivalent across the terminals A and B as shown in Fig.4. (6M)
b) Find the Average and Effective values of the Saw-tooth wave form shown in Fig.5. (6M)
(OR)
5.a)Find the current IL in the circuit shown in Fig.6,by using Millman’s theorem. (6M)
UNIT – III
6.a) Obtain the resonant frequency for a circuit consisting of RL elements connected in parallel to
capacitance, Also obtain expression for Q-factor in terms of R, L and C. (6M)
b) The impendence Z1= (5+j3) Ω and Z2= (10-j30) Ω are connected in parallel as shown in Fig.7.
Find the value of X3which will produce resonance at the terminals a and b. (6M)
(OR)
7.a) Determine the current I in the circuit shown in Fig.8 by using superposition theorem.
(6M)
b) A RLC series circuit is to be chosen to produce a magnification of 10 at 100rad/sec.The source can supply
a maximum current of 10A and the supply voltage is 100V.The Power frequency impendence of the circuit
should not be more than 14.14Ω.Find the values of R,L and C. (6M)
UNIT – IV
8.a) Find the initial value of the following functions
(ii) e ( sin 3q + cos 5q )
-q
(i) 2e -3t (6M)
b) Find the final value of the following functions
(i) 1 + e -2t cos 5t (ii) 2 - 2e - t (6M)
(OR)