0 évaluation0% ont trouvé ce document utile (0 vote)
19 vues2 pages
This document summarizes the slab design calculations for slab FS1 located in area 1-2 A-B. Key details include:
- Dimensions of 5600mm x 5000mm with 200mm thickness
- Total factored load of 24.82 kN/m^2
- Required steel reinforcement of 582mm^2 which satisfies deflection check of 1.00
- Recommendation to increase slab depth as deflection governs the design
This document summarizes the slab design calculations for slab FS1 located in area 1-2 A-B. Key details include:
- Dimensions of 5600mm x 5000mm with 200mm thickness
- Total factored load of 24.82 kN/m^2
- Required steel reinforcement of 582mm^2 which satisfies deflection check of 1.00
- Recommendation to increase slab depth as deflection governs the design
This document summarizes the slab design calculations for slab FS1 located in area 1-2 A-B. Key details include:
- Dimensions of 5600mm x 5000mm with 200mm thickness
- Total factored load of 24.82 kN/m^2
- Required steel reinforcement of 582mm^2 which satisfies deflection check of 1.00
- Recommendation to increase slab depth as deflection governs the design
Case 9: Four edges discontinuous Span and support coefficients, Bx, By, Bsx, Bsy = 0.067; 0.056; 0.000; 0.000
Moment based on the above coefficients (before redistribution):
Short span moment, Mx = Bx*WL = 0.067 *620.50 = 41.61 Long span moment, My = By*WL = 0.056 *620.50 = 34.75
Summary of Moment, Steel Area Required, Rebar Provided:
Mxx Myy Msy1 Msy2 Msx1 Msx2 Moment 34.75 41.61 0.00 0.00 0.00 0.00 Area 513 582 300 300 300 300 Rebar T10-150 T10-125 T10-250 T10-250 T10-250 T10-250
Deflection Check:
Dimensions Y, 5000 < X, 5600 AND bottom of bottom(BB) rebar is spanning Y-
direction: So effective depth, d = Thickness - cover - YRebar/2 = 200-20-10/2 = 175.0 mm Span/depth's ratio, Ar = l/d = 5000/175.0 = 28.6 Basic Span/depth's ratio, Br = 20.0 A = 2fyAs,req /(3As,prov) = 2*460*582/(3*628) = 284.0 B = 120*( 0.9 + M/(b*d^2) ) = 120*(0.9+41.61*1000/(175.0*175.0)= 271.1 Modification Factor, MF = 0.55 + (477 - A)/B = 0.55+(477-284.0)/271.1 = 1.26 Slab deflection ratio = MF*Br/Ar = 1.26*20.0/28.57 = 0.88 Area after deflection check = 747 A = 2fyAs,req /(3As,prov) = 2*460*582/(3*747) = 238.9 Modification Factor, MF = 0.55 + (477 - A)/B = 0.55+(477-238.9)/271.1 = 1.43 Slab deflection ratio = MF*Br/Ar = 1.43*20.0/28.57 = 1.00 Deflection governs the design, consider option to increase depth! Ratio >= f1 : Deflection check PASSED
Deflection governs the design, Steel Area Provided After Deflection Check: Steel Area = 747 ; Use T10-100 -----------------------------------------------------------