Microsoft Excel 97 Date: September 18, 2010 SWAB SWAB and and SURGE SURGE PRESSURES PRESSURES
WELL GEOMETRY SEC 1 SEC 2 SEC 3 SEC
SEC 44 SEC 5 Length of Each Annulus, ft? = 12,060 1,000 0 0 Diameter of Each Annulus, in? = 3.92 3.75 0 0 OD of Pipe Run in Each Annulus, in? = 2.88 2.88 0 0 DRILLING FLUID PROPERTIES OTHER Mud Weight, ppg? = 12.8 Measured Depth of Well, ft? = 13,060 Yield Point, lb/100ft²? = 17 Measured Depth Last Casing Set? = 12,060 Plastic Viscosity, cp? = 20 Desired Running Speed for Pipe, fpm? = 30 DEPTH CHECK Start with the Well Geometry entries Verify the Sum of Section Lengths Equals MD for the Well DO from the top of the hole in SEC 1. RESULTS BY SECTION SEC 1 SEC 2 SEC 3 SEC 4 SEC 5 Critical Velocity, fpm 417 424 0 Fluid Velocity Due to Pipe Movement 73 84 0 Induced Pressure Difference 794 96 0 Equivalent Change ECD, ppg 1.27 1.31 0.00 Surge ECD, ppg 14.07 14.11 0.00 Swab ECD, ppg 11.53 11.49 0.00 0.00 0.00 THE END