Académique Documents
Professionnel Documents
Culture Documents
a] Event tree
b] Fault tree
c] Risk tree
d] Result tree
a] Process piping
b] Storage tanks
c] Structural systems
d] Pressure relief devices
a) Risk mitigation
b) Risk mitigation, risk acceptance
c) Risk mitigation, risk acceptance and risk communication
d) Risk analysis
Q.8. The term “failure” used for Failure Analysis in RBI typically means :
a) Absolute risk
b) Realistic risk
c) Relative risk
d) Residual risk
Q. No. Answer
1 d
2 d
3 a
4 c
5 b
6 d
7 c
8 c
9 c
10 a
a) 5 and 3
b) 5 and 2
c) 2 and 3
d) None of above
Q.2. In Quantitative analysis find Inspection Factor (IF) for a process unit
if vessels and piping are formally inspected for visual and UT
thickness readings but there is no formal program of identification of
failure mechanisms as well as evaluation of all inspection results
a) -6
b) -10
c) 0
d) -4
Q.3 Sulfidation Rate for carbon steel at 520o F with Sulpher content 0.5%
by weight ,was 5 mpy. What will its corrosion rate be with sulpher
content of 1.0%
a) 3 mpy
b) 5 mpy
c) 6 mpy
d) 10 mpy
Q.5 Satisfactory material for hydrogen service (800 psi partial pr. And
800o F temp) will be
a) Carbon steel
b) 1 Cr- 0.5 mo steel
c) No suitable material exists
d) Use carbon steel with PWHT
a) 15 points
b) 25 points
c) 20 points
d) 10 points
a) General corrosion
b) Pitting
c) Localised corrosion from outside
d) All of above are thinning mechanisms
Q.8. Calculate process factor (PF) for Qualitative analysis for a system
experiencing about 15 interruptions per year, the process is
extremely stable and even though process upsets take place. They
are not harmful. The product has slight fouling and plugging
potential.
a) 5
b) 6
c) 8
d) 10
Q.9. For Qualitative analysis, the likelihood factor works out to 36. What
is likelihood category?
a) 3
b) 4
c) 5
d) 2
a) 25
b) 15
c) 25
d) 20
Q. No. Answer
1 a
2 d
3 b
4 c
5 b
6 C
7 d
8 b
9 b
10 d
a) Failure
b) Sulphidation
c) Wet H2S damage
d) Graphitization
a) HTHA
b) Fatigue
c) Brittle fracture
d) Soil corrosion
a) Fatigue
b) Caustic attack on carbon steel pressure vessels
c) Wet H2S attack on C. S.
d) Both b and c
a) Qualitative Analysis
b) Quantitative Analysis
c) Used in both a and b
d) Used in neither a or b
Q.10. In RBI consequence analysis, if fluid inside the vessel is liquid but
its boiling point is less than 800F, the phase considered for
consequence analysis will be taken as :
a) Solid
b) Liquid
c) Gas
d) Liquid – Gas mixture
Q. No. Answer
1 b
2 a
3 c
4 a
5 b
6 b
7 d
8 b
9 a
10 c
a) Zero
b) 1
c) 2
d) 3.5
a) -1.5
b) 0
c) -2.5
d) 4.5
Q.5. It was estimated that for a certain facility handling flammable fluid,
the probability of failure = 0.001 per year and probability of ignition
was 1 in 100. If consequence loss due to this fire is 5 million US
dollars, what is the risk of fire in US dollars per year
a) 50
b) 500
c) 5
d) None of these
Q. No. Answer
1 c
2 c
3 c
4 c
5 a
6 b
7 c
8 b
9 c
10 d