0 évaluation0% ont trouvé ce document utile (0 vote)
155 vues1 page
This document records the inspection and calibration of an instrument. It lists the tag number, manufacturer, model number, and relevant drawings. It details checking the instrument for physical damage and water ingress. The calibration process involves raising and lowering the input signal to record the corresponding output readings at 0%, 50%, and 100% of the instrument's range. The results are checked to be within the manufacturer's stated accuracy. Space is provided to record the input, actual readings, and any errors during rising and falling calibration. The calibration is signed off as completed, witnessed, and accepted.
This document records the inspection and calibration of an instrument. It lists the tag number, manufacturer, model number, and relevant drawings. It details checking the instrument for physical damage and water ingress. The calibration process involves raising and lowering the input signal to record the corresponding output readings at 0%, 50%, and 100% of the instrument's range. The results are checked to be within the manufacturer's stated accuracy. Space is provided to record the input, actual readings, and any errors during rising and falling calibration. The calibration is signed off as completed, witnessed, and accepted.
This document records the inspection and calibration of an instrument. It lists the tag number, manufacturer, model number, and relevant drawings. It details checking the instrument for physical damage and water ingress. The calibration process involves raising and lowering the input signal to record the corresponding output readings at 0%, 50%, and 100% of the instrument's range. The results are checked to be within the manufacturer's stated accuracy. Space is provided to record the input, actual readings, and any errors during rising and falling calibration. The calibration is signed off as completed, witnessed, and accepted.
2 3 Manufacturer: Data Sheet No: 4 5 Model Number: P&ID No: 6 7 Range: Eng Unit: Layout Drawing No: 8 9 10 PUNCH ITEMS OK N/A 11 ITEM 12 INSPECTION CHECKLIST 13 Check Instrument tagplate details against data sheet 14 Check Instrument has no physical damage 15 Check no water ingress/condensation 16 17 CALIBRATION 18 Raise input signal and record corresponding output signal at readings of 0, 50, 100% of 19 range 20 Lower input signal and record corresponding output signal at readings of 100, 50, 0% of 21 range 22 Check above results are within manufacturers stated accuracy 23 24 25 26 Input Reading 27 28 Rising Falling 29 % Span Actual 30 Actual % Span Error % Actual % Span Error % 31 32 0 33 34 50 35 36 100 37 38 39 40 41 42 43 44 45 46 47 48 Completed By Witnessed By Accepted By