Académique Documents
Professionnel Documents
Culture Documents
A, these are low cost, simple in design and suitable for rough handling and use.
B, they have low efficiency in terms of its input compressed air power.
C, these drills are noisy and their exhausts generate mist and fog. D, none
5, calculate the velocity of the bit at the rock face, while a steel body strikes the rock face with
the 120 Mpa stress in a compressive wave velocity of 5000m/s.
6, A bit having 65mm diameter is impacted by 4 s-1 frequency of the hammer, and produces
5mm distance between two consecutive blows, so what will be the bit rotation speed
9, An air operated drill, mainly used for drilling vertical holes are;
10, which type of drilling system is used in exploration for sample collections to estimate the
quality and quantity of a mineral reserve
Part two
14, Assume u are a mining engineer, so you want to drill a holes in underground mine working
face at any angle from down to slightly above horizontal. For efficient working what type of drill
u have to use?
15, what is the difference b/n blast hole and shot hole?
16, list the factors that affect bit rotation speed, and explain how they will affect?
20 write the different types of tunneling/development drill jumbos and explain where they are
applicable?
21, Determine the penetration rate of a drill with 10t weight rotates in a speed of 6 rpm to drill
60mm diameter of holes in a rock having a compressive strength of 88 Mpa.