Académique Documents
Professionnel Documents
Culture Documents
I. Multiple Choice. Write the number of the correct answer on your answer sheet.
3. Coded programs and instructions that control the overall operations of a computer or may also help
in increasing office productivity are called __________________.
1System 2Peripheral 3Software 4Hardware
4. Which of the following job requirements would highly require an image editing software to be
installed?
1Office Productivity 2Accounting 3Engineering 4Graphic Design
5. What must be worn to avoid damaging a component by transferring unwanted charges to it?
1Anti-static Straps 2Gloves 3Goggles 4Anti-static Bags
7. An employee wishes to install a new printer into his computer, what must he do to ensure that the
OHS procedures are followed?
1Let the technician install the printer 2Test the printer in another computer 3Immediately install the
printer himself 4Read the manual and install the printer himself
8. What type of container is used to protect a component from damages caused by electric charges?
1Anti-conductive Bag 2Anti-insulation Bag 3Anti-kinetic Bag 4Anti-static Bag
10. What must be aligned to ensure that the CPU is properly placed?
1Locks 2Pins 3Threads 4Jacks
11. What software must be installed to act as the overall manager of the computer system’s actions?
1Operating System 2Malware 3System Driver 4Application Software
12. Which software must be installed to ensure that all peripherals will work accordingly?
1Malware 2Application Software 3System Driver 4Operating System
13. What type of cable is usually used to connect a computer system to the network?
1PPT Cable 2UTP Cable 3PUT Cable 4TUP Cable
14. What networking device is used to connect a computer system to a network using wireless
technology?
1Router 2Hub 3Port 4RJ45
15. Which of the following is another term used for the IT department?
1Information System 2Interactive Technology
3Internetwork System 4Infrastructure Technology
16. Which of the following locations may require a network switch with multiple number of ports?
1Reception 2Library 3Personal Office 4Computer Laboratory
17. What computer system form factor best fits a small office?
1Laptops 2Mainframes 3Desktop PC’s 4Tower PC’s
18. Which of the following must be considered if wireless connectivity will be applied in a certain
location?
1Possible signal barriers 2Number of ports3Availability of Ethernet ports4Cable layout
19. Which of the following job requirements would need the most powerful display adapter?
1Creating a slide presentation
2Proofreading a document
3Computing in a spreadsheet
4Editing a video
20. What is the common measurement used for data transfer speed?
1RPM 2GHz 3Mbps 4DPI
21. What is the common measurement used to determine the processing speed of a CPU?
1RPM 2GHz 3Mbps4DPI
22. What unit is commonly used to measure the capacity of a hard disk drive?
1MB 2GD 3Mb 4GB
23. Which of the following measures the sensitivity of a pointing device like a mouse?
1RPM 2GHz 3Mbps 4DPI
31. Without an operating system, all computer hardware and peripherals will be _____________.
1Inoperative 2Functional 3Usable 4Operational
32. What type of material is used to transfer data or electricity from one component to another?
1Connectors 2Cables 3Software 4Tools
33. What type of material is composed of physical components and peripherals?
1Software 2Connectors 3Hardware 4 Cables
34. What type of material is used to instruct a computer on what to do?
1Connectors 2Software 3Cables 4Hardware
35. What type of material that is usually handheld is used to perform a particular purpose?
1Connectors 2Cables 3Software 4Tools
II. Identify the following. Read the given definitions and choose your answers on inside the
treasure box.
Philips screw driver Network firewall Router USB BIOS
Flash drive UTP Soldering iron LAN tester Long nose pliers
36. Server – is a part of a network. It is a special computer that users on the network can
access to carry out a particular job.
37. Port hub /Port – is a connector on the back of a computer or other device. It is
either a serial port or a parallel port.
38. Modem – It is a device that allows a given computer to share data or otherwise a
device which let computers exchange information
39. LAN Card – is a network interface card. This is a computer circuit board or card that
is installed in a computer so that it can be connected to a network.
40. Scanner- it is an input device that read text or illustration printed on paper,
translates the information into a form that a computer can use
41. USB – Universal Serial Bus, a hardware interface for low-speed peripherals such as
the keyboard, mouse, joystick, scanner, printer and telephony devices.
42. BIOS – Basic Input / Output System, chip that controls the most basic functions of
the computer and performs a self-test every time you turn it on.
43. Flash drive– RAM that can retain data without electrical power. It is widely used for
BIOS chips and for digital camera and digital music storage
44. Long nose pliers – is used for holding, bending and stretching the lead of electronics
component or connecting wire.
45. Soldering Iron – is used to join two or more metal conductors with the support of
soldering lead melted around it.
46. Philips Screw Driver- is used to drive or fasten positive slotted screws
47. LAN Tester- for RJ11,12,45 & BNC w/ Remote Unit This ergonomic tester is
designed to test most network cable wiring. You can either conduct an auto or
manual test.
48. UTP – Unshielded Twisted Pair, is a popular type of cable used in computer
networking that consists of two shielded wires twisted around each
50. Routers - are small physical devices that join multiple networks together.