Académique Documents
Professionnel Documents
Culture Documents
VoIP Basic
Protocol
Select the communication protocol (SIP or MGCP) and the IP Address (WAN or
LAN/VPN) used by VoIP. You need to configure relative settings at first. Please refer to
Figure 28-1 as an example of Vigor 3300V.
Port Settings
This page displays the basic settings for each port. Click the Edit icon in the Phone
Number page to enter the Edit page. Then you can configure this port.
Setup the Speed Dial Phone numbers, this function is more convenient to dial extension
number or IP address. There are 150 entries available at most.
Miscellaneous
Tone Settings
There are optional built-in 14 groups of tone for different regions, and a group of tone
(User Defined) can be configured by users.
QoS
Enable this function to ensure the quality of VoIP conversation. The default value is
Enable.
NAT Traversal
When the WAN interface of 3300 is a private IP address, the VoIP traffics must pass
through the upper-layer NAT router. User can enable STUN function in order to make
VoIP function can work smoothly.
This function can receive or reject the specific VoIP calling via Internet. The rules are
based on the speed dial number or IP/Domain.
Call History
Status