Académique Documents
Professionnel Documents
Culture Documents
Series B
Direct Current Tachometer Generators
Quality-built to last!
Silver graphite carbon brushes ensure maintenance-free performance over a long period of
time. High precision sealed ball bearings eliminate the need for periodic bearings lubrication.
Special greases with melting point of over 320°F lubricate the bearings.
Superior magnets.
Temperature compensated.
Scientifically aged Alnico magnets which overcome aging problems inherent with ordinary
magnets are used in all Standco generators. Temperature coefficient of these temperature
compensated generators is ±0.005% per degree C.
Maximum permissible generator load is 12 watts at 3000 RPM. If the generator is used at
higher speeds, the load resistance must be rated so that the maximum load of 12 watts is not
exceeded. Maximum speeds for the generator are based on the maximum voltage permissible
for the commutators.
Maximum linearity error when full power is taken from the generator is less then 1.5%.
When the external resistance increases to 10 times the value, the error reduces to 0.5%. All
generators are temperature compensated. The temperature coefficient is ±0.0005% per degree
C.
With an output of 5 VAC per 1,000 RPM, the Model D Generators are ideal for
applications where a rugged, small size, economical and dependable generator is
required. They can be flange mounted or base mounted with a bracket.
This heavy duty, totally enclosed generator is particularly well suited for
very slow speed operation and is also designed for center zero applications
such as are found in the marine industry. Without any up gearing, it can be
used at speeds as low as 100 RPM when the indicator reads full scale.
Base or flange mounting is available. It has an output of 50 VDC at 1,000
RPM. other models available with a 6 VDC per 1,000 RPM.