Académique Documents
Professionnel Documents
Culture Documents
Página 1 de 19
Data Mode
NOTE: Activation of service program "Data Mode" does not affect any machine controls and
operations except for the following:
The LED indicators for power mode switch, travel speed control switch, light switch, and wiper switch
come ON only in flashing mode during activation of service program "Data Mode".
The Data Mode contains the following function modes which provide eight categories of information.
2. Engine speed.
7. Digital input.
file:///C:/SIS/TMP/sis46A81prt.html 29/04/2015
Copyright 1991, 2015 Caterpillar Inc. All Rights Reserved. Página 2 de 19
(4) Character display. (17) Power mode selector switch. (18) Power mode III indicator. (36) Alarm
cancel switch. (38) Alarm cancel indicator.
NOTE: To access and view the eight available functions in the "Data Mode", the engine can either be
running or shut down. If the engine is running the eight Data Mode functions can be viewed as operating
values. If the engine is not running the starter switch must be in the "ON" position.
1. Depress and hold alarm cancel switch (36) until alarm cancel indicator (38) starts flashing.
2. While alarm cancel switch (36) is depressed, push power mode selector switch (17) until power mode
III indicator (18) begins to flash. Release alarm cancel switch (36) and power mode selector switch (17).
file:///C:/SIS/TMP/sis46A81prt.html 29/04/2015
Copyright 1991, 2015 Caterpillar Inc. All Rights Reserved. Página 3 de 19
3. The service program "Data Mode" is now activated and character display (4) will display the first
function mode (power shift pressure) value.
NOTE:
If switch (17) is held too long, the character display will sequence through the eight available function
modes in the "Data Mode" program.
(4) Character display. (17) Power mode selector switch. (18) Power mode III indicator. (36) Alert cancel
switch.
file:///C:/SIS/TMP/sis46A81prt.html 29/04/2015
Copyright 1991, 2015 Caterpillar Inc. All Rights Reserved. Página 4 de 19
1. Repeatedly push first alarm cancel switch (36) and then power mode switch (17) until the desired
function mode is displayed on character display (4).
2. Each time both switches are pushed, the function mode changes in an increasing number sequence of
the eight function modes in a repetitious manner.
3. At the same time that the function mode character is displayed the corresponding switch indicator
comes on. To determine the function mode selected, look for the switch indicator which is flashing.
NOTE: If alarm cancel switch (36) is depressed for more than 2 seconds the Data Mode stops and
character display (4) displays the engine speed dial position.
NOTE: Accessing the "Data Mode Functions" must be performed in the sequence shown in the
following chart.
Each of the eight Data Mode functions has a designated indicator light. The following chart shows the
eight Data Mode functions and their designated indicator lights:
file:///C:/SIS/TMP/sis46A81prt.html 29/04/2015
Copyright 1991, 2015 Caterpillar Inc. All Rights Reserved. Página 5 de 19
(4) Character display. (17) Power mode selector switch. (18) Power mode III indicator. (36) Alarm
cancel switch.
When this function mode is selected, power mode III indicator (18) flashes. The character display (4)
displays "P" in the first position and actual power shift pressure in the second and third positions. The
unit of power shift pressure is in kgf/cm2. 1 kgf/cm2 is approximately the same as 100 kPa (14 psi).
Engine Speed
file:///C:/SIS/TMP/sis46A81prt.html 29/04/2015
Copyright 1991, 2015 Caterpillar Inc. All Rights Reserved. Página 6 de 19
When this function mode is selected, power mode II indicator (19) flashes. Character display (4) will
display the engine speed in rpm, regardless of the machine load. Multiply the rpm values in character
display (4) by 10 to determine actual rpm.
file:///C:/SIS/TMP/sis46A81prt.html 29/04/2015
Copyright 1991, 2015 Caterpillar Inc. All Rights Reserved. Página 7 de 19
When this function mode is selected, power mode I indicator (20) flashes. Character display (4) displays
the engine coolant temperature within a range of 14°C to 127°C (57°F to 260°F). The engine coolant
temperature units are displayed in 1°C (1.8°F) increments. If the character display reading is below 0°C,
the first position on the character display reads "-".
NOTE: Character display (4) displays the engine coolant temperature in degrees Celsius.
file:///C:/SIS/TMP/sis46A81prt.html 29/04/2015
Copyright 1991, 2015 Caterpillar Inc. All Rights Reserved. Página 8 de 19
When this function mode is selected, light 1 indicator (23) flashes. Character display (4) displays the
hydraulic oil temperature within a range of 14°C to 127°C (57.2°F to 260.6°F). The hydraulic oil
temperature units are displayed in 1°C (1.8°F) increments.
NOTE: Character display (4) displays the hydraulic oil temperature in degrees Celsius.
file:///C:/SIS/TMP/sis46A81prt.html 29/04/2015
Copyright 1991, 2015 Caterpillar Inc. All Rights Reserved. Página 9 de 19
When the analog/digital conversion function mode is selected, light 2 indicator (24) flashes. Character
display (4) displays the analog information for eight machine functions. A conversion chart is needed to
understand the digital information indicated. Description of the eight machine functions omitted since
this information is not needed for service or diagnosis.
file:///C:/SIS/TMP/sis46A81prt.html 29/04/2015
Copyright 1991, 2015 Caterpillar Inc. All Rights Reserved. Página 10 de 19
When this mode is selected, travel speed HIGH (rabbit) indicator (26) flashes. Character display (4)
displays the codes for problems that have occurred. They are displayed in an increasing number
sequence according to "Problem List" shown below, in a repetitious manner. A character display code
remains displayed for 2 seconds with an interval of 1 second between codes.
NOTE: A display code of [E00] indicates that there are no system errors.
file:///C:/SIS/TMP/sis46A81prt.html 29/04/2015
Copyright 1991, 2015 Caterpillar Inc. All Rights Reserved. Página 11 de 19
NOTE: Go to the appropriate "Electronic Sequence Chart" to troubleshoot the problem of [E33] in
accordance with the following:
file:///C:/SIS/TMP/sis46A81prt.html 29/04/2015
Copyright 1991, 2015 Caterpillar Inc. All Rights Reserved. Página 12 de 19
Digital Input
file:///C:/SIS/TMP/sis46A81prt.html 29/04/2015
Copyright 1991, 2015 Caterpillar Inc. All Rights Reserved. Página 13 de 19
(4) Character display. (7) Work mode switch. (17) Power mode selector switch. (27) Travel speed LOW
(tortoise) indicator. (36) Alarm cancel switch.
When this mode is selected, travel speed LOW (tortoise) indicator (27) flashes. This mode displays 21
types of information on character display (4).
1. Depress and hold alarm cancel switch (36) and then depress power mode switch (17) until travel
speed LOW (tortoise) indicator (27) flashes. Release alarm cancel switch (36) and power mode switch
(17).
2. Character display (4) will display [0 9] or [010]. The first character position "0" indicates that this is
the first of 21 "ports" or additional types of information. The " 9" indicates the wiring harness code for
the 320 and 320 L Excavators with 3066 engine. The "10" indicates the wiring harness code for the 320,
file:///C:/SIS/TMP/sis46A81prt.html 29/04/2015
Copyright 1991, 2015 Caterpillar Inc. All Rights Reserved. Página 14 de 19
3. To sequence through the 21 "ports", first depress and hold alarm cancel switch (36) and then work
mode switch (7) until the character display reads the desired "port".
NOTE: This mode is capable of providing a total of 21 types of information. Eight of the 21
"ports" (additional types of information) are spares.
The following chart gives a listing of the 21 "ports" and their components:
file:///C:/SIS/TMP/sis46A81prt.html 29/04/2015
Copyright 1991, 2015 Caterpillar Inc. All Rights Reserved. Página 15 de 19
file:///C:/SIS/TMP/sis46A81prt.html 29/04/2015
Copyright 1991, 2015 Caterpillar Inc. All Rights Reserved. Página 16 de 19
NOTE: Ports "0" and "1" give no indication of "[ O n] or [ o F] on the character display.
Typical Examples:
[0 9] : Indicates the machine model of "320" or "320 L" excavator with 3066 engine. If a different code
appears in the second and third positions, check the circuit for good grounding.
[010] : Indicates the machine model of "320", "320 L", "320 N", or "320 S" excavator with 3116 engine.
If a different code appears in the second and third positions, check the circuit for good grounding.
[1Er] : There is a problem in engine speed dial or circuit between speed dial and controller. (Er:error)
NOTE: To check the travel pressure switch, activate the travel control with the pressure switch in ON
position. If the character display does not read [2On], it is an indication of a possible problem in the
travel pressure switch and/or its circuit.
file:///C:/SIS/TMP/sis46A81prt.html 29/04/2015
Copyright 1991, 2015 Caterpillar Inc. All Rights Reserved. Página 17 de 19
When this function mode is selected, wiper 1 indicator (32) flashes. Character display (4) displays the
code that represents current pump output. The initial code displayed will be [L00] for a normal pump
output control. The character display code remains ON for 2 seconds with an interval of 0.5 seconds
between codes.
Typical Examples:
file:///C:/SIS/TMP/sis46A81prt.html 29/04/2015
Copyright 1991, 2015 Caterpillar Inc. All Rights Reserved. Página 18 de 19
NOTE: During "Output Control Display" function, the AEC system and one touch low idle do not
activate. The engine speed dial switch controls the engine speed only under a no load condition.
REFERENCE: For more information on the pump output control, refer to module, "Systems Operation,
Electronic System", Form No. SENR6048 or Form No. SENR5404.
file:///C:/SIS/TMP/sis46A81prt.html 29/04/2015
Copyright 1991, 2015 Caterpillar Inc. All Rights Reserved. Página 19 de 19
2. Keep alarm cancel switch (36) depressed at least 2 seconds until character display (4) displays the
engine speed dial position.
file:///C:/SIS/TMP/sis46A81prt.html 29/04/2015