Académique Documents
Professionnel Documents
Culture Documents
95fyAs
structures (2nd edition) – errata slip Page 47: Table 19 should read as below
Shear 0.4F – 0.46F – 0.6F – 0.5F Page 49: Fig 12 Stress diagram 0.87fyAs should read 0.95fyAs
where F is the total design ultimate load (1.4Gk + 1.6Qk) for each span and l is the effective span
where F is the total design ultimate load on a panel bounded by four columns and l is the effective span.
Note: The moments at supports taken from this table may be reduced by 0.015 Fhc
Allowance has been made for 20% redistribution as allowed in BS 8110 1.
*These moments may have to be reduced to be consistent with the capacity to transfer moments to the columns. The midspan
moments † must then be increased correspondingly.