Académique Documents
Professionnel Documents
Culture Documents
Technical brochure
2 • Colours
3 • Dimensions
5 • Tests
7 • General installation instructions
24 • Cleaning and maintenance
26 • Accessories
27 • Technical specifications
Woodn versatilis
[ Colours ]
05 Marostica 09 Cuba*
The images shown in this catalog are only indicative of the grain and colour of the product. As the product contains natural fibers,
there may be slight variations in colour/appearance depending on the production lot. The sending and/or delivery of any samples
constitute only general indications of the dimensions and the aesthetic appearance of Woodn products. For more precise and detailed
information about their characteristics, please refer solely to the technical information by visiting our website www.woodn.com.
Woodn Industries reserves the right to terminate, update, make technical changes to improve the quality and appearance of the material,
without prior notice. Woodn assumes no responsibility for product applications that are not specifically mentioned for its own products.
www.woodn.com
2
Woodn versatilis
[ Dimensions ]
JF7040_50X25
section
70 x 40
1080 4 90x150x3020 ≈13,70
standard length
3000
JF7040_30X15
section
70 x 40
1100 4 90x150x3020 ≈13,80
standard length
3000
JF7220 530
section
(only profile)
72 x 20
810 22 180x185x3020 ≈36,50
standard length (profile +
1000 reinforcement)
JF11020
section
110 x 20
1350 4 50x230x3020 ≈17,70
standard length
3000
JF15045_25_50X25
section
150 x 45 x 25
1900 4 156x160x3020 ≈24,00
standard length
3000
JF15238
section
152 x 38
1480 5 165x205x3020 ≈25,35
standard length
3000
JF18041
section
180 x 41
2400 3 135x190x3020 ≈22,80
standard length
3000
THJX3321
section
33 x 21
140 12 144x80x2020 ≈3,35
standard length
2000
DT20936
section
208,5 x 36
3000 3 216x123x250 ≈22,50
standard length
2500
The external dimensions listed are nominal. The weights of the profiles are indicative. Refer to the theoretical drawings on our
website www.woodn.com for the shape, internal dimensions, weights of the profiles and manufacturing tolerances.
www.woodn.com
3
Woodn versatilis
[ Dimensions ]
JF4030
section
40 x 30
627 12 170x100x3020 ≈22,60
standard length
3000
JF6032
section
60 x 32
1000 6 190x74x3020 ≈18,00
standard length
3000
JF12058
section
120 x 58
2269 3 180x130x2020 ≈20,50
standard length
3000
TZ180180
section
180 x 180
4695 1 190x190x3020 ≈14,10
standard length
3000
TZ6060
section
60 x 60
1000 4 130x130x3020 ≈12,00
standard length
3000
TZ9555
section
95 x 55
1700 4 200x120x3020 ≈20,50
standard length
3000
C35-16*16
section Ø 35
(16*16 mm)
460 18 212x107x3020 ≈24,80
standard length
3000
C50R
section Ø 50
standard length 531 12 218x169x3020 ≈19,20
3000
LG3020
section
30 x 20
380 20 158x88x3020 ≈22,80
standard length
3000
The external dimensions listed are nominal. The weights of the profiles are indicative. Refer to the theoretical drawings on our
website www.woodn.com for the shape, internal dimensions, weights of the profiles and manufacturing tolerances.
www.woodn.com
4
Woodn versatilis
[ Tests ]
Dynamic-mechanical analysis
ASTM D4065/95 78,7°C
of transition temperature
Level 5:
Resistance to temperature fluctuations
UNI 9429:89 there are no
(after 15 cycles, range -20°/+50°C)
surface defects
Longitudinal 0,07%
After 24h to +50°C
Dimensional changes associated Transversal -0,15%
with changes in temperature Longitudinal -0,03%
After 24h to -20°C
Transversal -0,30%
• Reaction to fire •
www.woodn.com
5
Woodn versatilis
Profile characteristics
• Mechanical properties •
Threaded insert extraction load
AVDEL 0VN21_02838 / 1,25 KN
(test performed at 30°C)
The values shown are indicative and not binding. We remain available to perform any tests on request.
The natural aging of the material and temperature variations, with respect to the test temperature, may cause greater
or lesser deviations of the actual characteristics of the profile compared to the values indicated.
The product is protected by guarantee according to the terms and conditions of law: for more information
www.woodn.com
www.woodn.com
6
Woodn versatilis
• General rules •
The laying temperature should be greater than 0°C. Keep the material in stock at temperatures close to the installation
temperature for at least 48 hours prior to installation. Store the planks on a flat surface avoiding direct exposure to sun-
light.
Please carefully check the material before you install it as complaints will not be accepted after the installation has been
performed.
The mounting center-to-center distance must be adequately sized to meet the loads provided in the current regulations.
In the following pages, for each Versatilis profile, the maximum center-to-center application distances are shown, accord-
ing to the visible side, the horizontal or vertical installation of the profiles and the type of metal reinforcement used. The
values in the tables have been calculated considering a wind load of 150 kg/m².
The profiles must be mounted using mechanical systems that join the substructure with the metal reinforcement.
TO ALLOW NORMAL EXPANSION, MOUNTING SHOULD NOT BE DONE DIRECTLY ON THE WPC PROFILE.
In applying the profiles it is important to consider, when mounting them to the substructure, making a FIXED POINT, which
blocks the profile, in a precise position, during expansion due to thermal variations.
At all the other fixing points, FLOATING POINTS must be created to let the profile expand freely. The floating points can
be made by drilling appropriately sized holes or slots depending on the distance between the fixed point and the floating
points according to the calculation below:
where L = center-to-center distance between the fixed point and the floating point
and Ø = diameter of the fixing screw
For example:
L = 2000 mm, Ø = 4 mm
floating point hole diameter = floating point slot length = 2 x 2000 x 0.003 + 4 = 16 mm
www.woodn.com
7
Woodn versatilis
For the expansion spaces to remain over time, we recommend adhering strictly to the positioning diagram of the fixed
point.
WARNING: : if the application requires corners with planks cut at 45°, the fixed point must be at the corner.
WARNING: when mounting planks vertically, it is recommended to make the fixed point at the top end.
WARNING CONCERNING INSTALLATION: due to the peculiarities of the materials furnished, Woodn expressly disclaims
any liability with respect to its products when laying and installation are not carried out by specialized personnel, follow-
ing the specific instructions, including those related to adhesives and accessories contained in the technical sheets that
come with the products.
WARNING: the structures shown in the drawings on the following pages represent only rough construction indications
and all their components must be adequately sized in accordance with the regulations in force; sizing is the responsibility
of the customer.
For any special needs, please contact our technical department: ufficiotecnico@woodn.com
• Internal reinforcement •
ALL PROFILES USED OUTDOORS MUST BE REINFORCED.
The metal reinforcement profile must be shorter than the WPC profileby 40 mm. When centered in the WPC profile, it
must fall within 20 mm of each end. In the specific case of JF7040 profiles, in which the WPC WAJF7040C_WM closing
cap is installed, the reinforcement profile must be 90 mm shorter, falling 45 mm inside of the ends of the WPC profile.
www.woodn.com
8
[versatilis] JF7040
sunshades
NOTE: The values shown in the table are from a sizing performed taking into account a wind load of 150 kg/m².
The drawings show the nominal dimensions of the profiles.
www.woodn.com
9
[ woodn versatilis JF7040_30x15 ]
40 mm
70 mm
a 1 2 a
a = 15 mm
a = 40 mm in case of installation of the cap WAJF7040C_WM
1= FIXED POINT - Ø hole = Ø screw
2= FLOATING POINT - Ø hole = 2L x 0.003 = Ø screw [mm]
a a
1 2
NOTE: the systems shown are approximate, all components of the system must be adequately sized and verified by a qualified technician. The
drawings show the key points to take into account in the design and mounting stages, such as: handling the metal reinforcements, making
the fixed point, making the floating point.
www.woodn.com
10
[ woodn versatilis JF7040_25x25 ]
40 mm
70 mm
1 2
a a
a = 20 mm
a = 40 mm in case of installation of the cap WAJF7040C_WM
1= FIXED POINT - Ø hole = Ø screw
2= FLOATING POINT - Ø hole = 2L x 0.003 = Ø screw [mm]
1 2
a a
L
horizontal section isometric view
NOTE: the systems shown are approximate, all components of the system must be adequately sized and verified by a qualified technician. The
drawings show the key points to take into account in the design and mounting stages, such as: handling the metal reinforcements, making
the fixed point, making the floating point.
www.woodn.com
11
[ woodn versatilis JF7040_50x25 ]
a 1 2 a visible side
70 mm
L
visible side
a 1 2 a 40 mm
a = 20 mm
a = 45 mmin case of installation of the cap WAJF7040C_WM
1= FIXED POINT - Ø hole = Ø screw
2= FLOATING POINT - Ø hole = 2L x 0.003 = Ø screw [mm]
NOTE: the systems shown are approximate, all components of the system must be adequately sized and verified by a qualified technician. The
drawings show the key points to take into account in the design and mounting stages, such as: handling the metal reinforcements, making
the fixed point, making the floating point.
www.woodn.com
12
[versatilis] JF6032
sunshades
NOTE: The values shown in the table are from a sizing performed taking into account a wind load of 150 kg/m².
The drawings show the nominal dimensions of the profiles.
www.woodn.com
13
[versatilis] JF11020
sunshades
NOTE: The values shown in the table are from a sizing performed taking into account a wind load of 150 kg/m².
The drawings show the nominal dimensions of the profiles.
www.woodn.com
14
[ woodn versatilis JF11020 ]
5,0 mm
1 2
L
1= FIXED POINT = 49 mm
2= FLOATING POINT* = 49 mm + 2L x 0,003 [mm]
www.woodn.com
15
[versatilis] JF7220
sunshades
NOTE: The values shown in the table are from a sizing performed taking into account a wind load of 150 kg/m².
The drawings show the nominal dimensions of the profiles.
www.woodn.com
16
[ woodn versatilis JF7220 ]
www.woodn.com
17
[versatilis] JF15045
sunshades
NOTE: The values shown in the table are from a sizing performed taking into account a wind load of 150 kg/m².
The drawings show the nominal dimensions of the profiles.
www.woodn.com
18
[ woodn versatilis JF15045_25_50x25 ]
L L
f= L x 0,003 [mm]
www.woodn.com
19
[versatilis] JF15238
sunshades
NOTE: The values shown in the table are from a sizing performed taking into account a wind load of 150 kg/m².
The drawings show the nominal dimensions of the profiles.
www.woodn.com
20
[ woodn versatilis JF15238 ]
38 mm
152 mm
L L
f f
f= L x 0,003 [mm]
www.woodn.com
21
[versatilis] JF18041
sunshades
NOTE: The values shown in the table are from a sizing performed taking into account a wind load of 150 kg/m².
The drawings show the nominal dimensions of the profiles.
www.woodn.com
22
[ woodn versatilis JF18041_30x30 ]
2 1 2
2 2
L L
f f
www.woodn.com
23
Woodn versatilis
• Outdoor applications •
To keep the colouring of the profiles as unchanged as possible over time it is recommended to treat the surface with UV
oiling and renew this treatment as needed (follow manufacturer’s instructions).
• Indoor applications •
To protect the surface from stains and marks, you may want to treat it with periodic oiling, as needed.
Please note that any product applied to the surface causes a more or less marked variation in colour tone.
[ Cleaning ]
It is recommended to periodically clean as necessary with a vacuum cleaner or damp cloth and by washing with water or
neutral detergent.
In the case of staining of the profile, we recommend that you remove the stain as soon as possible using water and a
neutral detergent (avoid using abrasive cleaners or solvents, particularly acetone, alcohol, bleach).
Below is a table with the most common types of stain and their respective remedies:
Grease - oil Rub the stain with neutral detergent. Rinse thoroughly.
Soft drinks (eg. Coca Cola) Rub the stain with neutral detergent. Rinse thoroughly.
www.woodn.com
24
Woodn versatilis
Alcoholic drinks Rub the stain with neutral detergent. Rinse thoroughly.
Red wine Rub the stain with neutral detergent. Rinse thoroughly.
Fruit juice Rub the stain with neutral detergent. Rinse thoroughly.
Remove the excess paint with the blade of the cutter and then scuff lightly with fine sandpa-
Paint
per (or with steel brush) in the direction of the brushing (*).
Remove the excess silicone with the blade of the cutter then scuff lightly with fine sandpaper
Silicone
(or with steel brush) in the direction of the brushing (*).
Remove the excess glue with the blade of the cutter then scuff lightly with fine sandpaper
Glue
(or with steel brush) in the direction of the brushing (*).
Remove the excess wax with the blade of the cutter then scuff lightly with fine sandpaper
Candle wax
(or with steel brush) in the direction of the brushing (*).
If the mortar has not yet taken hold, wash with water and rinse thoroughly.
Mortar
If the mortar is dry, gently remove the excess mortar;
then abrade with a steel brush in the direction of the brushing (*).
For optimum results we recommend attempting to remove the stain as soon as possible.
After removing the stain it is advisable to restore the surface treatment not only on the treated part but over the entire plank so that the colour is
uniform.
www.woodn.com
25
Woodn versatilis
[ Accessories ]
compatible nominal
accessory code design material colour
profiles dimensions [mm]
JF7040_25X25
WAJF7040C_WM JF7040_30X15 69 x 39 x 28,5 wpc 2 / 9 / 13
JF7040_50X25
JF7040_25X25
maple / bronze
WAJF7040C_H JF7040_30X15 69 x 39 x 3 aluminium
silver / ebony
JF7040_50X25
maple / bronze
WAJF11020C_H JF11020 109 x 19 aluminium
silver / ebony
maple / bronze
WAJF18041C_H JF18041 179 x 40 aluminium
silver / ebony
maple / bronze
WAJF15238C_H JF15238 151 x 37 aluminium
silver / ebony
Remove any residual material from the profile due to cutting and with a dry cloth remove any remaining dust. Remove the
protective film from the adhesive strips placed under the cap. Insert the cap into the profile, being careful to center it. Ap-
ply light pressure with your hand to make the adhesive strips adhere well. Mechanically fix the cap, by means of stapling,
on both 40 mm sides of the profile at a distance from the head of about 15-20 mm.
Remove any residual material from the profile due to cutting and with a dry cloth remove any remaining dust. Remove the
protective film from the adhesive placed under the cap. Paste the cap on the end of the profile, being careful to center it.
Apply light pressure with your hand to make the adhesive strips adhere well to that part of the profile. Install the screws,
supplied, in the pre-drilled holes on the cap by means of hand tools.
www.woodn.com
26
Woodn versatilis
Colouration and grain in pulp, available in different colours. Dimensions are stable
in the presence of moisture, thermoformable, drillable, can be sawed and sanded,
free of formaldehyde, solvents and heavy metals.
Not affected by termites and pests, free from cracking and chipping.
www.woodn.com
27