Académique Documents
Professionnel Documents
Culture Documents
Pile verification
Input data
Project
Task : Evaluacion de Carga Pilote Modelo CDI- CORMORANES
Part : Urbanizacion Cormoranes
Description : Patologia Geotecnica CDI - CORMORANES
Customer : Alcaldia de Cucuta
Author : J.R.S.D
Date : 12/27/2017
Project ID : 01
Project number : 01
Settings
(input for current task)
Materials and standards
Concrete structures : ACI 318-11
Piles
Analysis for undrained conditions : Tomlinson
Load curve : linear (Poulos)
Horizontal bearing capacity : Elastic subsoil (p-y method)
Verification methodology : Safety factors (ASD)
Safety factors
Permanent design situation
Safety factor for compressive pile : SFcp = 2.00 [–]
Safety factor for tensile pile : SFtp = 3.00 [–]
Basic soil parameters
g n
No. Name Pattern
[kN/m3] [–]
Rellenos de Consistencia baja. CH.
1 16.30 0.45
Humedad alta.
Arcillas de consistencia alta. Arcillolita
2 19.00 0.30
CH.
All soils are considered as cohesionless for at rest pressure analysis.
1
[GeoStructural Analysis - Piles | version 5.19.5.0 | Copyright © 2015 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
Evaluacion de Carga Pilote Modelo CDI- CORMORANES
J.R.S.D Urbanizacion Cormoranes
Geometry
Pile profile: circular
Dimensions
Diameter d = 0.30 m
Length l = 12.00 m
Location
Off ground height h = 0.00 m
Depth of finished grade hz = 0.00 m
Technology: Bored piles
Modulus of subsoil reaction considered according to Vesič.
Material of structure
Unit weight g = 23.56 kN/m3
Analysis of concrete structures carried out according to the standard ACI 318-11.
2
[GeoStructural Analysis - Piles | version 5.19.5.0 | Copyright © 2015 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
Evaluacion de Carga Pilote Modelo CDI- CORMORANES
J.R.S.D Urbanizacion Cormoranes
Load
Load N Mx My Hx Hy
No. Name Type
new change [kN] [kNm] [kNm] [kN] [kN]
1 YES Diseño Design 180.00 15.00 10.00 25.00 15.00
2 YES Servicio Service 160.00 18.00 22.00 32.00 15.00
Ground water table
The ground water table is at a depth of 6.50 m from the original terrain.
Global settings
Analysis of vertical bearing capacity : analytical solution
Analysis type : analysis for undrained conditions
Verification No. 1
Verification of pile bearing capacity according to Tomlinson - partial results
Computation of pile base bearing capacity:
Design undrained shear strength cu = 50.00 kPa
Area of pile transverse cross-section Ap = 7.07E-02 m2
Pile ultimate skin resistance capacity:
3
[GeoStructural Analysis - Piles | version 5.19.5.0 | Copyright © 2015 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
Evaluacion de Carga Pilote Modelo CDI- CORMORANES
J.R.S.D Urbanizacion Cormoranes
1(1)
12.00
2(2)
Verification No. 1
Analysis of load settlement curve - input data
Layer Es
No. [MPa]
1 2.00
2 15.00
Type of pile : floating pile
Maximum pile settlement slim = 25.0 mm
4
[GeoStructural Analysis - Piles | version 5.19.5.0 | Copyright © 2015 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
Evaluacion de Carga Pilote Modelo CDI- CORMORANES
J.R.S.D Urbanizacion Cormoranes
Verification No. 2
Analysis of load settlement curve - input data
Layer Es
No. [MPa]
1 15.00
2 15.00
Type of pile : end-bearing pile
Maximum pile settlement slim = 25.0 mm
Verification No. 1
Input data to compute pile horizontal bearing capacity
Analysis carried out with automatic selection of the most unfavourable load cases.
Horizontal bearing capacity verified in the direction of maximum load effect.
5
[GeoStructural Analysis - Piles | version 5.19.5.0 | Copyright © 2015 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
Evaluacion de Carga Pilote Modelo CDI- CORMORANES
J.R.S.D Urbanizacion Cormoranes
6
[GeoStructural Analysis - Piles | version 5.19.5.0 | Copyright © 2015 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]
Evaluacion de Carga Pilote Modelo CDI- CORMORANES
J.R.S.D Urbanizacion Cormoranes
7
[GeoStructural Analysis - Piles | version 5.19.5.0 | Copyright © 2015 Fine spol. s r.o. All Rights Reserved | www.finesoftware.eu]