Académique Documents
Professionnel Documents
Culture Documents
Many people find answers in our continually-updated knowledge base and community. Give it a try!
Important:
For a detailed description about how to analyze the Quality Report: 202558689.
For a detailed description about any parameter described in the Quality
Report: 202558679.
Example of a Quality Report available at the following link: Quality Report.
Once step 1. Initial Processing is completed, the Quality Report is automatically displayed. To not be displayed automatically, unselect the Display Automatically
after Processing box at the bottom of the Quality Report.
When more than one step are processed sequentially the PDF Quality Report is generated in the results folder only when the processing is completed. However,
it is automatically displayed in Pix4D Desktop once a step is completed.
1. Quality Check
Verify that:
2. Preview
For projects with nadir images and for which the orthomosaic preview has been generated, verify that the orthomosaic:
(optional) If the images have geolocation, verify that the Initial Image Positions figure corresponds to the flight plan.
Verify that :
(optional) If using images with geolocation, the computed image geolocation is good.
(optional) If using only images with geolocation, the uncertainty ellipses are similar in size.
(optional) If using GCPs, the GCPs' error is low (the difference between input and computed GCPs is small).
(optional) If using GCPs and images with geolocation, the uncertainty ellipses are very small close to the GCPs and may increase for images further
away.
Verify that:
For projects only with image gelocation, the absolute camera position uncertainty is similar to the GPS accuracy and that the sigma is smaller than
the mean.
For projects with GCPs, the absolute camera position uncertainties are similar to the accuracy of the GCPs.
6. 3D Points from 2D Keypoints Matches
Verify that:
7. Geolocation Details
All GCPs are taken into account (not displayed with red color on the Geolocation and Ground Control Points table).
All marked GCPs have been verified.
8. Processing Options
Verify that:
(optional) If using GCPs, the Ground Control Point (GCP) Coordinate System is correct.
(optional) If using images with geolocation, the Image Coordinate System is correct.
Index > Step 4. Processing Previous | Next
example_quarry_report.pdf (2 MB)
Was this article helpful? 👍 👎 9 out of 11 found this helpful
Related articles
Step 4. Processing > 3. Point Cloud and Mesh
Quality Report Help
Quality Report Specifications
Using Pix4Dmapper Output Files with Other Software > By Output
Information i9012: Image geolocation when transfering from the SD card of the DJI drone is not precise enough