Académique Documents
Professionnel Documents
Culture Documents
Date:
Project: Designed by:
Checked by:
f f
y t e y t e
Other cases d d
1.4 f'c b 1.1 f'c b
Reinforcement location factor, Ψt = 1.30 -for horizontal reinforcement placed more than 300mm above fresh concrete
Reinforcement coating factor, Ψe = 1.00 -for uncoated and zic-coated (galvanized) bars
Modification factor, λ = 1.00 -for normalweight concrete
0.24
e fy d 8d
l
dh b (whichever is greater)
f' c b 150mm
Page 1 of 11
Job Number:
Date:
Project: Designed by:
Checked by:
0.24fy
db
f'c
l (whichever is greater)
dc
0.043fyd
NOTE: Ld is the development length of deformed bar in tension but without the minimum of 300mm development length and
the modification factor for the excess reinforcement.
Page 2 of 11
Job Number:
Date:
Project: Designed by:
Checked by:
TENSION
Page 3 of 11
Job Number:
Date:
Project: Designed by:
Reinforcement in excess of that required by analysis
Checked by:
Class A 1050
Splice
Class B 1375
Splice
For 180-degree hooks of No. 36 and smaller bars that are enclosed within ties or
stirrups perpendicular to the bar being developed, spaced not greater than 3db
along ldh
Ldc 537.500
Reinforcement in excess of that required by analysis
Splice 1025
Length
Page 4 of 11
Job Number:
Date:
Project: Designed by:
Checked by:
Page 5 of 11
Job Number:
Date: 09-Jun-18
Designed by: RDPB
Checked by:
2 and larger
bars
y t e d
7 f'c b
y t e d
1 f'c b
Page 6 of 11
Job Number:
Date: 09-Jun-18
Designed by: RDPB
Checked by:
cen As spliced ≤
pa
Page 7 of 11
Job Number:
Date: 09-Jun-18
Designed by: RDPB
Checked by:
COMPRESSION
DEVELOPMENT COMPRESSION
LENGTH
SPLICE
Ldc
225 425
275 500
350 675
450 825
550 1025
625 1150
700 1325
alysis
1.00
Page 8 of 11
Job Number:
Date: 09-Jun-18
Designed by: RDPB
alysis
Checked by:
1.00
alysis
1.00
Page 9 of 11
Job Number:
Date: 09-Jun-18
Designed by: RDPB
Checked by:
Page 10 of 11
268
12 4 121.6182
5 123.8622
6 126.1062
7 128.3502