Académique Documents
Professionnel Documents
Culture Documents
Router>
Router>en
Router#conf
Configuring from terminal, memory, or network [terminal]?
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#int g 0/0
Router(config-if)#ip address 192.168.1.1 255.255.255.0
Router(config-if)#no shut
Router(config-if)#
%LINK-5-CHANGED: Interface GigabitEthernet0/0, changed state to up
Router(config-if)#
Router(config-if)#
uter#
Router#show flash
c1900-universalk9-mz.SPA.151-4.M4.bin
Router#
Router#
Router#copy flash tftp
Router#copy flash tftp:
Writing c1900-universalk9-mz.SPA.151-
4.M4.bin...!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!
[OK - 33591768 bytes]
Router#
Router#delete flash
Delete filename []?
Router#sh flash
Router#
Router#reload
System configuration has been modified. Save? [yes/no]:n
Proceed with reload? [confirm]
System Bootstrap, Version 15.1(4)M4, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2010 by cisco Systems, Inc.
Total memory size = 512 MB - On-board = 512 MB, DIMM0 = 0 MB
CISCO1941/K9 platform with 524288 Kbytes of main memory
Main memory is configured to 64/-1(On-board/DIMM0) bit mode with ECC disabled
rommon 1 > ?
boot boot up an external process
confreg configuration register utility
dir list files in file system
help monitor builtin command help
reset system reset
set display the monitor variables
tftpdnld tftp image download
unset unset a monitor variable
rommon 2 >
rommon 2 >
rommon 2 >
rommon 2 > ip_address=192.168.1.1
rommon 3 > ip_subnet_mask=255.255.255.0
rommon 4 >
rommon 4 > IP_ADDRESS=192.168.1.1
rommon 5 > IP_SUBNET_MASK=255.255.255.0
rommon 6 > DEFAULT_GATEWAY=192.168.1.1
rommon 7 > TFTP_SERVER=192.168.1.2
rommon 8 > TFTP_FILE=c1900-universalk9-mz.SPA.151-4.M4.bin
rommon 9 > tftpdnld
yes
rommon 25 >
rommon 25 >
rommon 25 > reset
System Bootstrap, Version 15.1(4)M4, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2010 by cisco Systems, Inc.
Total memory size = 512 MB - On-board = 512 MB, DIMM0 = 0 MB
CISCO1941/K9 platform with 524288 Kbytes of main memory
Main memory is configured to 64/-1(On-board/DIMM0) bit mode with ECC disabled
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
Router>en
Router#
rommon 25 >
rommon 25 >
rommon 25 > reset