Académique Documents
Professionnel Documents
Culture Documents
Bus Conductors
Notes:
1. These are maximum deflection values in inches for a simple beam with uniformly distributed load. For beams fixed at both ends, the deflection will be one-fifth of the values given.
2. Deflection d1 for any other span L1 may be obtained from the relation: d1=d L14/L4
626
Bus Conductors
Bus Conductors
Deflection Values of Schedule 80 Aluminum Pipe
Nominal Pipe
Conditions 10 15 20 25 30 35 40 45 50
Size - In
1 0.16 0.81 2.56
1 1/4 0.10 0.49 1.54 3.77
1 1/2 0.07 0.36 1.15 2.82
2 0.04 0.23 0.72 1.76 3.65 6.76
2 1/2 0.03 0.16 0.49 1.21 2.50 4.64 7.92
Bare
3 0.02 0.10 0.33 0.80 1.66 3.08 5.25 8.40
3 1/2 0.01 0.08 0.25 0.60 1.25 2.32 3.97 6.36 9.69
4 0.01 0.06 0.19 0.47 0.98 1.82 3.11 4.98 7.58
5 0.01 0.04 0.12 0.31 0.63 1.17 2.01 3.21 4.89
6 0.01 0.03 0.09 0.21 0.44 0.82 1.40 2.25 3.43
1 0.40 2.01 6.34
1 1/4 0.22 1.11 3.51 8.65
1 1/2 0.16 0.79 2.51 6.12
2 0.09 0.46 1.45 3.54 7.40 13.72
2 1/2 0.05 0.28 0.88 2.15 4.46 8.33 14.20
1/2 in. ice
3 0.03 0.17 0.55 1.35 2.80 5.23 8.93 14.30
3 1/2 0.02 0.13 0.40 0.99 2.05 3.80 6.50 10.47 15.96
4 0.02 0.10 0.31 0.75 1.56 2.89 4.95 7.96 12.14
5 0.01 0.06 0.20 0.49 1.01 1.88 3.20 5.13 7.81
6 0.01 0.04 0.13 0.32 0.67 1.24 2.11 3.38 5.15
1 0.50 2.53 7.99
1 1/4 0.27 1.34 4.24 10.36
1 1/2 0.94 2.97 7.24
1/2 in. ice
2 0.10 0.53 1.66 4.06 8.42 15.60
4 lb Wind 2 1/2 0.06 0.31 0.98 2.39 4.95 9.17 15.65
3 0.04 0.19 0.60 1.47 3.06 5.66
Plus
3 1/2 0.03 0.14 0.44 1.07 2.21 4.10 7.00 11.21 17.08
Constant
4 0.02 0.10 0.33 0.81 1.67 3.09 5.28 8.45 12.88
5 0.01 0.06 0.20 0.49 1.01 1.88 3.20 5.13 7.81
6 0.01 0.04 0.13 0.32 0.67 1.24 2.11 3.38 5.15
1 0.76 3.86 12.21
1 1/4 0.40 2.02 6.39 15.80
1 1/2 0.28 1.40 4.42 10.79
2 0.15 0.77 2.43 5.94 12.46 23.09
2 1/2 0.09 0.44 1.38 3.37 6.99 13.10 22.34
1 in. ice
3 0.05 0.26 0.84 2.04 4.24 7.93 13.53 21.67
3 1/2 0.04 0.19 0.60 1.46 3.03 5.61 9.60 15.52 23.65
4 0.03 0.14 0.45 1.09 2.26 4.19 7.16 11.54 17.59
5 0.02 0.08 0.26 0.65 1.34 2.48 4.25 6.85 10.44
6 0.01 0.05 0.17 0.42 0.87 1.61 2.75 4.41 6.72
Notes:
1. These are maximum deflection values in inches for a simple beam with uniformly distributed load. For beams fixed at both ends, the deflection will be one-fifth of the values given.
2. Deflection d1 for any other span L1 may be obtained from the relation: d1=d L14/L4
627