Académique Documents
Professionnel Documents
Culture Documents
Chapter 2
Page 31 Problem 2.1. The capillary number in Figure 2.35 is NCa*. NCa* should be calculated instead of
NCa(Eq. 2.31)
Page 33 Problem 2.7. Delete “Refer to Ref.12 for solutions to this problem.” You can solve this
problem using Fig. 2.35.
Chapter 3
Page 41 Fig 3.12 Intersection on fw-Sw fractional flow curve should be fw1 instead of fw3
Page 59 Example 3.10 –the bracket in the second line of the solution should be squared
Page 68 Prob 3.9 Delete ao1 and bo1 from Table 3.20
Page 68 Prob 3.9 third sentence under part 2 should read interval from tD=0 until….
Chapter 4
Page 84-85 Example 4.3 Frontal advance rate should be 0.375 ft/D. This is equivalent to a Darcy velocity
of 0.075 ft/D
Page 95 First column, first paragraph. Sec. 3.7 should be Sec. 4.6
Page 96 Second column 3 lines from bottom. (933 ft2) should be (933 ft)2
Page 97 Problem 4.1 ρ2 = 1.1609 g/cm3 in problem statement and in Table 4.6
Page 124 The equation above Eq. 5.44 should read (∆p/L)uc2 =(∆p/L)uN and uc2 1-nc1 = λpuN/λ*p
Page 125 In the example calculation following Equation 5.57, uc1 = 0.019 ft/d
Page 125 Second column, last paragraph from bottom, Eq. 5.40 should be Eq. 5.59.
Page 132 Equation 5.97 –second Swr* should have an overbar in Eq. 5.97.
Chapter 5
Page 174 Problem 5.3. Replace “frontal advance rates(q/Aφ)” with “Darcy velocity(q/A).
Chapter 6
Page 211 At Eq. 6.15 reference in previous line should be Eq. 6.15
Page 211 9 lines from bottom-second column. Eq 6.14 should be Eq. 6.15
Page 214 Example 6.9 Rv/g is calculated correctly but is missing L/h in sample calculation
Appendix A
Page 441 Fig A-2 does not have shaded areas as described in text. Correct figure was omitted.