Vous êtes sur la page 1sur 3

Gerdy V.

Abu
E-mail : gerdy_abu@yahoo.com Phone : +639281717671
Address : 126 Tramo San Antonio, San Pascual, Batangas City

Work experience
Group Five Construction (GHANA ) December 3, 2012 — September 11, 2013
Limited
Boiler Maker
-Installation and fabricate pipe support. Grinds welds or seams to fit, using portable grinder.

-Removes boiler casings, grades, handrails Drills and taps holes for installation of studs, using portable drill.

-Tightens bolts to assemble frames, using hand or power wrenches.

-Locates and marks reference points for columns or plates on foundation, using master straightedge, squares,
transit, and measuring tape, and applying knowledge of geometry.

KENTZ Engineers & Constructors July 05, 2010 — July 29, 2011
Boiler Maker
-Modification of channel and beam

-Installation and assembly of structural

-Fabricate of channel and beam

-Reading and analyzing structural drawing

-Alignment of structural Colum and Tank

Daewoo Engineering & Construction : August 29, 2008 — August 29, 2009
Co., Ltd
Pipe Fitter
-Lay-out, cutting, bevelling 37.5 degrees, fitting, assembling and fixing pipes to different position (
vertical/horizontal/slanting)

- Fit-up different kinds of fitting like elbow 90˚ and 45˚ tee and flange as per drawing

- Installation of pipe spool on pipe rack

- Fabricate of pipe support

Daewoo E & C (CTSD Limited) February 2, 2007 — July 1, 2008


Pipe Fitter
-Lay-out, cutting, bevelling, fitting, assembling and fixing pipes to different position.

-Assigned in fabricator to fit-up the different kinds of fitting like elbow 90˚ and 45˚ tee (unequal, equal tee) and
flange as per drawing.

-Layout, fit-up the tube bundle assigned by piping foreman.

Gerdy V. Abu 1
-Assigned in fabrication cutting and welding at the same time.

Daewoo Center, 5-GA February 2, 2007 — July 1, 2008


Pipe Fitter
-Participating in the alignment, fitting and erection of pipes of the position required in the sketch and drawing
(ISOMETRIC).

-Installation of pipe spool on the pipe rack.

-Fabricate of pipe support.

-Performing other related work in the fabrication shop directed by the piping foreman.

Carlos M. Ilagan (CMI) July 15, 2006 — January 05, 2007


Pipe Fitter
-Assisting in the erection of the big pipes as to have installed, aligned of different kinds of valve.

-Performing others related work in the fabrication shop directed by piping foreman.

-Always doing housekeeping of working area before and after work to prevent accident.

GAD Builders & Enterprises March 14, 2003 — April 09, 2005
Pipe Fitter
-Layout structural drawing with exact measure according to the plan.

-Reading and analyzing structural drawing.

Qualifications
Cherry Picker 660 Driver Operator

Tele-Handler Genia Driver Operator

Plant Safety and Fire Protection and Prevention

Safe Working in Confined Space

Pneumatic Testing

Bolt Tensioning and Manual Tourquing

Education
Elementary June 3, 1989 — March 24, 1995
San Antonio Elementary School

Secondary June 13, 1995 — April 6, 1999


Bauan High School

Interests
Music, Reading, Driving

References
Gerdy V. Abu 2
Mr. Pierre Van Heever
HR Manager
Kentz E & C Co.
Tete, Mozambique
+258843897911

Gerdy V. Abu 3

Vous aimerez peut-être aussi