Vous êtes sur la page 1sur 2

Electrical Engineering II

Exercise
Sheet 2

1. Conversion of parallel and serial connection

Convert the given circuit from a) to b).


Values for circuit a): 2.0kΩ, 100nF.
The circuit operates with a frequency 1.4kHz.
Calculate the values for , .

2. Capacitive voltage divider

A voltage divider for AC is designed using two capacitors C1=5.0nF, C2=45nF. The
power supply has U=60V and f=1.0kHz.
a) Calculate the voltage at the output U2.
b) We want to add a resistor with R=10kΩ resistance. What voltage can be
measured at the resistor?

3. Calculation of phase shift

A resistor is in series to a capacitor as shown in the picture


to the right.
The current I has the effective value of 50mA and the
frequency f=800Hz. The capacitor has C=250nF and the
resistor R=750Ω.
a) Calculate UR, UC and U.
b) Which angle φ is between the Voltage UC and U?

4. Phase shift and voltages

A coil with inductivity L=50mH is in series to a resistor


R=150Ω. The circuit should be extended with an
additional resistor RV as shown in the picture. The voltage
source has an effective value U=48V and frequency
f=800Hz.
Which value for RV is required, so that the voltage over R
and L URL =30V.
5. Voltage divider with additional capacitor

The given voltage divider with R1=900Ω and


R2=100Ω has additional the capacitor
C=1.25µF. The voltage source delivers
U=100V at f=400Hz.
a. Calculate the voltage U2.
b. Which angle φ has the phase shift between U2 and U.

Vous aimerez peut-être aussi