Académique Documents
Professionnel Documents
Culture Documents
EastRising
R EA
buydisplay.com
0B
1B ER-TFT050-3
2B TFT LCD Display Datasheet
ISO9001
Registered Company
sira
CERTIFICATION
011
4B Attention:
A. Some specifications of IC are not listed in this datasheet. Please refer to the IC datasheet for more details.
B. The related documents for interfacing, demo code, ic datasheet are all available, please download from our web.
C. Please pay more attention to “INSPECTION CRITERIA” in this datasheet. We assume you already agree with these criterions
7B
REV
8B3 DESCRIPTION
9B4 RELEASE DATE
10B5
buydisplay.com
14B937
CONTENTS
15B0H
21B8HU 2. SPECIFICATION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 05 U
45B20H
buydisplay.com
buydisplay.com
1. ORDERING INFORMATION
54B197
ER-CON40HT-1 ZIF Connector with 40 Pins 0.5mm Pitch SMD Top Contact
1.2 Image
buydisplay.com
2. SPECIFICATION
58B214039
Display Format
63B057 800(RGB)x 480 Dots
64B158 --
65B29
Display Connector
6B308 FPC
67B419 --
68B5270
FPC Connector
69B3 40 Pin,0.5mm Pitch, SMD Horizontal Type Top Contact --
Operating Temperature
70B648 -20 ~ +70
71B685
72B698 ℃
Storage Temperature
73B0689 -30 ~ +80
74B16890
℃
75B2691
Sunlight Readable
82B796 83B07 No --
84B17
Diagonal Size
89B63 5
90B874 91B85 inch
Outline Dimension with FPC Folded 120.90x75.95x2.9 mm
Active Area
92B86 108.0x64.8 mm
93B087
Pixel Pitch
9B63 0.135(W) x 0.135(H) mm
10B985
Gross Weight
102B96 135.0
103B97 g
104B98
IC Package
109B637 COG
10B742 --
1B085
Controller
12B0967 ILI6122
13B072 -- 14B08
Interface
15B209 RGB Interface
16B309 --
17B4
LCD Type
12B9653 TFT-LCD / Transmissive / Negative
123B0754 --
124B85
Colors
13B2856 65K/262K/16.7M
132B9657 --
13B02758
URL:
REV DESCRIPTION DESIGN DATE
A0 1'ST DEGIN JIM Aug-12-2016
Customer Approved by:
buydisplay.com
EastRising
R
110.70±0.2 V,A
www.buydisplay.com
5.00±0.3 3.10±0.2 MODULE THICKNESS
2.08±0.3
108.00±0.0 A,A
6.35±0.3
3.20±0.3
BACK
Handler
See Detail A
3. OUTLINE DRAWING
5.0'' TFT
800(RGB)X480
64.80±0.0 A,A
67.50±0.2 V,A
BACK
FRONT
Component Area
COMPONENTS AREA
48.50±0.5
25.90±0.2 1.50 MAX
26.30±0.3
4.00±0.2
5.00±0.50
27.80±0.2
STIFFENER
CONDUCTOR STIFFENER
TFT LCD Display Datasheet
1 40 40 1
0.30±0.05
FPC DEFINED
PIN NO. SIGNAL PIN NO. SIGNAL
1 LEDK 21 B0
2 LEDA 22 B1
0.135 3 GND 23 B2
NOTE: 4 VCC 24 B3
0.045 5 25
R0 B4
1.DISPLAY TYPE: TFT(NEGATIVE)
6 R1 26 B5
2.LCD POLARIZER TYPE: TRANSMISSIVE 7 R2 27 B6
8 R3 28 B7
3.VIEWING DIRECTION: 6 O'CLOCK RG B RG B
9 R4 29 GND
4.OPERATING VOLTAGE: VDD:3.3V RG B RG B 10 R5 30 CLK
11 R6 31 DISP
5.OPERATING TEMP: -20 ~ +70°C RG B RG B
12 R7 32 HSYNC
6.STORAGE TEMP: -30 ~ +80°C 13 G0 33 VSYNC
EASTRISING TECHNOLOGY CO.,LTD
0.135
Page: 6 of 19
ER-TFT050-3
TFT LCD Display Datasheet ER-TFT050-3
EastRising
R EA
buydisplay.com
4. ELECTRICAL SPEC
4.1 Pin Configuration
48B139562
3 GND Ground
29 GND Ground
30 CLK Clock
32 HSYNC Horizontal sync input in RGB mode. (Short to GND if not used)
33 VSYNC Vertical sync input in RGB mode. (Short to GND if not used)
35 NC Not Connection
36 GND Ground
X_ Right (This pin is used for resistive touch panel and active when the fpc of touch panel
37 XR
is connected with the fpc of display, otherwise it’s no connection)
Y_ Down (This pin is used for resistive touch panel and active when the fpc of touch panel
38 YD
is connected with the fpc of display, otherwise it’s no connection)
X_ Left (This pin is used for resistive touch panel and active when the fpc of touch panel is
39 XL
connected with the fpc of display, otherwise it’s no connection)
Y_ Up (This pin is used for resistive touch panel and active when the fpc of touch panel is
40 YU
connected with the fpc of display, otherwise it’s no connection)
buydisplay.com
Backlight Characteristics
268B5 ITEM 269B3 SYMBOL CONDITION
271B685 MIN. TYP.
27B69 273B06 MAX. 274B168 UNIT
BL Forward voltage Vf If=40mA - 19.2 - V
BL Supply Current If - - 40 - mA
BL Luminance Lv If=40mA 4200 - - Cd/m2
buydisplay.com
5. INSPECTION CRITERIA
286B3094
PARTITION
289B63 AQL
290B874 DEFINITION
291B85
A. Major
29B86 0.4%
293B087 Functional defective as product
294B18
B. Minor
295B8 1.5%
296B30 Satisfy all functions as product but not satisfy cosmetic standard
297B41
◆ INSPECTION CONDITION
305B29
314B
buydisplay.com
5.4 Module Cosmetic Criteria
438B15209
h H
buydisplay.com
9 Backlight defects 1.Light fails or flickers.(Major)
2. Color and luminance do not correspond to specifications. See
(Major) list
3.Exceeds standards for display’s blemishes, foreign matter, ←
dark lines or scratches.(Minor)
10 PCB defects Oxidation or contamination on connectors.*
2. Wrong parts, missing parts, or parts not in specification.*
3.Jumpers set incorrectly.(Minor) See
4.Solder(if any)on bezel,LED pad,zebra pad,or screw hole list
pad is not smooth.(Minor) ←
*Minor if display functions correctly.Major if the display fails.
buydisplay.com
5.5 Screen Cosmetic Criteria (Non-Operating)
No. Defect Judgment Criterion Partition
4 Scratch In accordance with spots and lines operating cosmetic criteria, When the Minor
light reflects on the panel surface, the scratches are not to be remarkable.
5 Allowable density Above defects should be separated more than 30mm each other. Minor
6 Coloration Not to be noticeable coloration in the viewing area of the LCD panels. Minor
Back-lit type should be judged with back-lit on state only.
7 Contamination Not to be noticeable. Minor
buydisplay.com
5.6 Screen Cosmetic Criteria (Operating)
No. Defect Judgment Criterion Partition
1 Spots A) Clear Minor
Size:d mm Acceptable Qty in active area
d≦0.1 Disregard
0.1<d≦0.2 6
0.2<d≦0.3 2
0.3<d 0
Note: Including pin holes and defective dots which must be within one pixel
Size.
B) Unclear
Size:d mm Acceptable Qty in active area
d≦0.2 Disregard
0.2<d≦0.5 6
0.5<d≦0.7 2
0.7<d 0
2 Lines A) Clear Minor
L 5.0 (0)
8
L 10.0 (0)
8
(6)
buydisplay.com
No. Defect Judgment Criterion Partition
3 Rubbing line Not to be noticeable.
4 Allowable density Above defects should be separated more than 10mm each other. Minor
5 Rainbow Not to be noticeable. Minor
6 Dot size To be 95%~105%of the dot size (Typ.) in drawing. Minor
Partial defects of each dot (ex.pin-hole) should be treated as’spot’.
(see Screen Cosmetic Criteria (Operating) No.1)
7 Brightness Brightness Uniformity must be BMAX/BMIN≦2 Minor
(only back-lit - BMAX :Max.value by measure in 5 points
Module) - BMIN : Min.value by measure in 5 points
Divide active area into 4 vertically and horizontally.
Measure 5 points shown in the following figure.
Note:
(1) Size : d=(long length + short length)/2
(2) The limit samples for each item have priority.
(3) Complexed defects are defined item by item, but if the number of defects is defined in above table, the total
number should not exceed 10.
(4) In case of ‘concentration’, even the spots or the lines of ‘disregarded’ size should not be allowed. Following three
situations
Should be treated as ‘concentration’.
-7 or over defects in circle of ¢5mm.
-10 or over defects in circle of ¢10mm
buydisplay.com
-20 or over defects in circle of ¢20mm
◆ This device is susceptible to Electro-Static Discharge (ESD) damage. Observe Anti-Static precautions.
321B85
◆ EastRising display panel is made of glass. Do not subject it to a mechanical shock by dropping it or impact.
32B196
◆ If EastRising display panel is damaged and the liquid crystal substance leaks out, be sure not to get any in
32B017
your mouth. If the substance contacts your skin or clothes, wash it off using soap and water.
◆ Do not apply excessive force to the EastRising display surface or the adjoining areas since this may cause
324B18
dry cloth. If it is heavily contaminated, moisten cloth with one of the following Isopropyl or alcohol.
◆ Solvents other than those above-mentioned may damage the polarizer. Especially, do not use the Water.
327B41
◆ Exercise care to minimize corrosion of the electrode. Corrosion of the electrodes is accelerated by water
328B5
sure it is free of twisting, warping and distortion. In particular, do not forcibly pull or bend the cable or the
backlight cable.
◆ Do not attempt to disassemble or process EastRising LCD module.
30B274
◆ If the logic circuit power is off, do not apply the input signals.
32B96
◆ To prevent destruction of the elements by static electricity, be careful to maintain an optimum work
3B027
environment.
-Be sure to ground the body when handling EastRising LCD modules.
34B128
-Tools required for assembling, such as soldering irons, must be properly grounded.
35B29
-To reduce the amount of static electricity generated, do not conduct assembling and other work under dry
36B0
conditions.
-The LCD module is coated with a film to protect the display surface. Exercise care when peeling off this
37B41
buydisplay.com
◆ Use a clean power source free from transients. Power-up conditions are occasionally jolting and may
341B85
display. Don’t allow the data bus to be driven when the logic supply to the module is turned off. 43B07
45B32198
◆ Minimize the cable length between EastRising module and host MPU.
346B0
◆ For models with backlights, do not disable the backlight by interrupting the HV line. Unload inverters
347B1
produce voltage extremes that may arc within a cable or at the display.
◆ Operate EastRising module within the limits of the modules temperature specifications.
348B52
◆ Improper soldering is the major cause of module difficulty. Use of flux cleaner is not recommended
350B47
as they may seep under the electrometric connection and cause display failure.
351B48
◆ Mount EastRising module so that it is free from torque and mechanical stress.
352B496
◆ Surface of the LCD panel should not be touched or scratched. The display front surface is an easily
35B047
scratched, plastic polarizer. Avoid contact and clean only when necessary with soft, absorbent cotton
dampened with petroleum benzene.
◆ Always employ anti-static procedure while handling EastRising module.
354B18
◆ Prevent moisture build-up upon the module and observe the environmental constraints for storage tem
35B249
◆ If leakage of the liquid crystal material should occur, avoid contact with this material, particularly ingestion.
357B41
If the body or clothing becomes contaminated by the liquid crystal material, wash thoroughly with water and
soap
468B352
Keep EastRising modules in bags (avoid high temperature / high humidity and low temperatures below 0C
360B574
Whenever possible, EastRising LCD modules should be stored in the same conditions in which they were
361B58
6.6 Others
Liquid crystals solidify under low temperature (below the storage temperature range) leading to defective
36B057
orientation or the generation of air bubbles (black or white). Air bubbles may also be generated if the module
is subject to a low temperature.
If EastRising LCD modules have been operating for a long time showing the same display patterns, the
364B158
buydisplay.com
display patterns may remain on the screen as ghost images and a slight contrast irregularity may also
appear. A normal operating status can be regained by suspending use for some time. It should be noted that
this phenomenon does not adversely affect performance reliability.
To minimize the performance degradation of the LCD modules resulting from destruction caused by static
365B29
electricity etc., exercise care to avoid holding the following sections when handling the modules.
-Exposed area of the printed circuit board.
36B0
69B3845 362B
EastRising LCD is composed of glass and polarizer. Pay attention to the following items when handling.
370B64
◆ Please keep the temperature within specified range for use and storage. Polarization degradation, bubble
371B685
generation or polarizer peel-off may occur with high temperature and high humidity.
◆ Do not touch, push or rub the exposed polarizers with anything harder than an HB pencil lead (glass,
372B69
tweezers, etc.).
◆ N-hexane is recommended for cleaning the adhesives used to attach front/rear polarizers and reflectors
37B06
made of organic substances which will be damaged by chemicals such as acetone, toluene, ethanol and
isopropylalcohol.
◆ When EastRising display surface becomes dusty, wipe gently with absorbent cotton or other soft material
374B168
like chamois soaked in petroleum benzin. Do not scrub hard to avoid damaging the display surface.
◆ Wipe off saliva or water drops immediately, contact with water over a long period of time may cause
375B269
◆ Condensation on the surface and contact with terminals due to cold will damage, stain or dirty the polarizers.
378B52
After products are tested at low temperature they must be warmed up in a container before coming is
contacting with room temperature air.
◆ Do not put or attach anything on EastRising display area to avoid leaving marks on.
379B6
◆ Do not touch the display with bare hands. This will stain the display area and degradate insulation
380B74
◆ As glass is fragile. It tends to become or chipped during handling especially on the edges. Please
382B796
◆When assembling the LCM into other equipment, the spacer to the bit between the LCM and the fitting
386B0
plate should have enough height to avoid causing stress to the module surface, refer to the individual
387B41
buydisplay.com
◆ Do not make extra holes on the printed circuit board, modify its shape or change the positions of
391B85
components to be attached.
◆ Do not damage or modify the pattern writing on the printed circuit board.
392B86
◆ Absolutely do not modify the zebra rubber strip (conductive rubber) or heat seal connector.
39B087
◆ Except for soldering the interface, do not make any alterations or modifications with a soldering iron.
394B18
◆ Before remove LCM from its packing case or incorporating it into a set, be sure the module and your body
39B6
◆ When using an electric screwdriver to attach LCM, the screwdriver should be of ground potentiality to
401B3985
minimize as much as possible any transmission of electromagnetic waves produced sparks coming from the
commutator of the motor.
◆ As far as possible make the electric potential of your work clothes and that of the work bench the ground
402B396
potential.
◆ To reduce the generation of static electricity be careful that the air in the work is not too dried. A relative
403B97
If soldering flux is used, be sure to remove any remaining flux after finishing to soldering operation. (This
409B63
does not apply in the case of a non-halogen type of flux.) It is recommended that you protect the LCD
surface with a cover during soldering to prevent any damage due to flux spatters.
◆ When soldering the electroluminescent panel and PC board, the panel and board should not be detached
410B7
more than three times. This maximum number is determined by the temperature and time conditions
mentioned above, though there may be some variance depending on the temperature of the soldering iron.
◆ When remove the electroluminescent panel from the PC board, be sure the solder has completely melted,
41B085
463B120957
buydisplay.com
contrast.
◆ Driving the EastRising LCD in the voltage above the limit shortens its life.
41B08
◆ Response time is greatly delayed at temperature below the operating temperature range. However, this
415B209
does not mean the LCD will be out of the order. It will recover when it returns to the specified temperature
range.
◆ If EastRising display area is pushed hard during operation, the display will become abnormal. However, it
416B30
which are found to be functionally defective when inspected in accordance with EastRising LCD acceptance
standards (copies available upon request) for a period of one year from date of shipments. Cosmetic/visual
defects must be returned to EastRising within 90 days of shipment. Confirmation of such date shall be based
on freight documents. The warranty liability of EastRising limited to repair and/or replacement on the terms set
forth above. EastRising will not be responsible for any subsequent or consequential events.
Module repairs will be invoiced to the customer upon mutual agreement. Modules must be returned with
429B63
sufficient description of the failures or defects. Any connectors or cable installed by the customer must be
removed completely without damaging the PCB eyelet’s, conductors and terminals
. 430B27
431B285