Académique Documents
Professionnel Documents
Culture Documents
Max. Capacities:
100kg...300kg
Special features
· OIML-R60 approval
· Off center load compensated
(OIML R76)
· Protection class IP65
(according to EN 60 529)
· 6-wire-technology
· Meets EMC standards
(EN 45 501)
Options on request:
· EEx ia IIC T6 approval
MLAS100-04 (hooked)
e.g. pcb connection
Mounting:
Cylindrical screw M8-10.9
Tightening torque: 32Nm
Material:
Aluminum
±0.0700
±0.0933
±0.0700
±0.0933
±0.0280
±0.0186
±0.0350
±0.0233
Temperature effect
on zero balance (TK0)
% of Cn
Temperature effect / 10K
on sensitivity (TKC) 2)
Temperature range:
±0.0350 ±0.0117
+20 ... +40°C [+70 ... +105°F]
±0.0525 ±0.0175
--10 ... +20°C [+15 ... +70°F]
Hysteresis error (dhy) 2) ±0.0500 ±0.0166
Non-linearity (dlin) 2) ±0.0500 ±0.0166
% of Cn
Creep (dcr; dDR) over 30 min. ±0.0500 ±0.0166
Off center load error ±0.10003) ±0.02334)
Input resistance (RLC) 024 ±15 420 ±15
W
Output resistance (R0) 350 ±5 350 ±5
Reference excitation voltage (Uref) 5 5
V
Nominal range of excitation volt. (BU) 1 ... 15 1 ... 15
Insulation resistance (Ris) at 100VDC GW >1 >1
Nominal temperature range (BT) --10 ... +40 --10 ... +40
Service temperature range (Btu) C
°C --10 ... +50 --10 ... +50
Storage temperature range (Btl) --25 ... +70 --25 ... +70
%
Safe load limit (EL) *) 150 150
v. Emax
*) at max. eccentricity mm 150 150
Lateral load limit (Elq), static % 300 300
Breaking load (Ed) of Emax 300 300
Deflection at Emax (snom), approx. mm < 0.6 < 0.6
Weight (G), approx. kg 1.4 1.4
Protection class according to EN60529
IP65 IP65
(IEC529)
Material: Measuring element Aluminum Aluminum
Coating Silicone rubber Silicone rubber
1) According to OIML R60 with PLC = 0.7
2) The data for Non--linearity (dlin), Hysteresis error (dhy) and Temperature effect on sensitivity (TKC) are typical values. The
sum of these data meets the requirements according to OIML R60.
3) Refers to the scale capacity (Max) for 1000d.
The tolerance value corresponds to 70% of the permissible scale error according to OIML R76, Class IIII.
4) Refers to the scale capacity (Max) for 3000d.
The tolerance value corresponds to 70% of the permissible scale error according to OIML R76, Class III.
wt 07.01 -- (pdf)
D.PW24.0e -- 304.24 -- 1050.4 -- Version a -- 19.07.2001