Académique Documents
Professionnel Documents
Culture Documents
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
2.01.1 C&G: Clearing and grubbing by removal and disposal of everything sqm
above ground level including overhanging branches, removing of all
foundation stumps, embedded logs, tree roots and other material either
to a depth of 0.3m below the proposed surface elevation or to the level
as shown on the drawing, disposing of all materials resulting from
clearing and grubbing at a safe distance, etc. all complete as per
direction of the E-I-C.
Sardar 0.0010 day 800.00 0.80
Ordinary Labour 0.0200 day 370.00 7.40
Subtotal-A: 8.20
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 8.36
2.01.2. Unknown...
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
2.02.1 EFW: Earth filling work by manual labour with specified soil in any type
of embankment and bridge approaches including cutting, carrying,
filling, and compacting to 85% maximum dry density at optimum
moisture content, with reference to laboratory density test AAHSTO
standard hammer by throwing earth in layers not more than 150mm in
each layer in proper alignment, grade, camber and side slope in all
types of soil other than rocky, gravelly and slushy including clod
breaking to a maximum size of 100mm, benching not more than
300mm vertical and 600mm horizontal steps along the sides while
widening any embankment, etc. all complete as per direction of the E-I-
C. Earth is to be borrowed from the road side for all lead. Payment will
be made on compacted volume. (compaction will be done by the
contractor/LCS worker with approved equipment, including all ancillary
charges for compaction and testing)
Subtotal-A: 116.50
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 118.83
Note : Rates of all items should be inclusive of all supply and carriage. Page: 2 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 135.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 137.70
Subtotal-A: 153.50
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 156.57
Note : Rates of all items should be inclusive of all supply and carriage. Page: 3 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 175.70
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 179.21
Subtotal-A: 201.60
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 205.63
Note : Rates of all items should be inclusive of all supply and carriage. Page: 4 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 223.80
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 228.28
Subtotal-A: 249.70
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 254.69
Note : Rates of all items should be inclusive of all supply and carriage. Page: 5 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
2.02.2 EFW(AE): Earth filling work with specified soil in any type of
embankment, Earth shall be arranged by the contractor's own cost
including royalty, cutting, carrying, filling and compacting to
85%/95%/98% maximum dry density at optimum moisture content,
with reference to laboratory density test AAHSTO standard hammer by
throwing earth in layers not more than 150mm in each layer in proper
alignment, grade, camber and side slope in all types of soil except
rocky, gravelly and slushy including benching not more than 300mm in
vertical and 600mm in horizontal steps along the sides while widening
any embankment with clod breaking to maximum size of 100mm,
benching the side slopes, removing roots and stumps of trees of girth
upto 200mm, stripping/ ploughing the base of embankment and borrow
pit area, dug bailing, clearing jungles, bail out of water, rough dressing
including 150mm cambering at the centre of crest with all leads and
lifts complete (compaction will be done by the contractor with
approved equipment including all ancillary charges for compaction and
testing) as per direction of Engineer in charge. Payment will be made on
compacted volume.
Subtotal-A: 160.70
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 163.91
Note : Rates of all items should be inclusive of all supply and carriage. Page: 6 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 195.80
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 199.72
Note : Rates of all items should be inclusive of all supply and carriage. Page: 7 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 211.45
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 215.68
Note : Rates of all items should be inclusive of all supply and carriage. Page: 8 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
2.02.3 EFW(CE): Earth filling work with specified soil in any type of
embankment, Earth shall be carried by truck/boat or any other means,
supplied at contractor's own cost including royalty, cutting, carrying,
filling and compacting to 85%/95%/98% maximum dry density at
optimum moisture content, with reference to laboratory density test
AAHSTO standard hammer by throwing earth in layers not more
than150mm in proper alignment, grade, camber and side slope in all
types of soil except rocky, gravelly and slushy including benching not
more than 300mm in vertical and 600mm in horizontal steps along the
sides while widening any embankment, with clod breaking to maximum
size of 100mm, benching the side slopes, removing roots and stumps of
trees of girth upto 200mm, stripping/ ploughing the base of
embankment and borrow pit area, dug bailing, clearing jungles, bail out
of water, rough dressing including 150mm cambering at the centre of
crest with all leads and lifts complete (compaction will be done by
the contractor with approved equipment including all ancillary charges
for compaction and testing) as per direction of Engineer in charge.
Payment will be made on compacted volume. The item is applicable
when earth is supplied and arranged by the contractor from a distance
beyond 200m from the end of right of way.
Subtotal-A: 211.90
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 216.14
Note : Rates of all items should be inclusive of all supply and carriage. Page: 9 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 247.60
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 252.55
Note : Rates of all items should be inclusive of all supply and carriage. Page: 10 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 260.55
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 265.76
Subtotal-A: 228.70
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 233.27
Note : Rates of all items should be inclusive of all supply and carriage. Page: 11 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 265.30
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 270.61
Note : Rates of all items should be inclusive of all supply and carriage. Page: 12 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 279.30
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 284.89
Note : Rates of all items should be inclusive of all supply and carriage. Page: 13 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Note : Rates of all items should be inclusive of all supply and carriage. Page: 14 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 149.37
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 152.36
Note : Rates of all items should be inclusive of all supply and carriage. Page: 15 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 169.37
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 172.76
Note : Rates of all items should be inclusive of all supply and carriage. Page: 16 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 205.37
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 209.48
Note : Rates of all items should be inclusive of all supply and carriage. Page: 17 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 245.37
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 250.28
Note : Rates of all items should be inclusive of all supply and carriage. Page: 18 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 285.37
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 291.08
Note : Rates of all items should be inclusive of all supply and carriage. Page: 19 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 325.37
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 331.88
Note : Rates of all items should be inclusive of all supply and carriage. Page: 20 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 385.37
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 393.08
Note : Rates of all items should be inclusive of all supply and carriage. Page: 21 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
2.03.1 CB: Providing clay blanket/clay cover by carried earth supplied at cum
contractor's own cost including royalty in different thickness over the
side slopes or crest of the road embankment with selected soil (clay
content minimum 80% and silt content 0-20%) including throwing clay
in layers not exceeding 150 mm in thickness, clod breaking, benching
the side slopes and compacting to 95% minimum dry density at
optimum moisture content with reference to laboratory density test
AASHTO standard hammer with suitable equipment dressing etc.
complete as per direction of Engineer-in-charge. Composition of
specified soil must be confirmed by laboratory test before use.
(compaction will be done by the contractor with approved equipment
including all ancillary charges for compaction and testing) as per
direction of Engineer in charge. Payment will be made on compacted
volume.
Royalty of Earth (Outside Municipal Area) 1.1800 m3 35.00 41.30
H.C. of Flat Body Truck (3 tons) 0.0200 day 2000.00 40.00
Sardar 0.0040 day 800.00 3.20
Ordinary Labour 0.3200 day 370.00 118.40
H.C. of Vibratory Road Roller (8-10 ton) 0.0070 day 3000.00 21.00
Diesel 0.3000 liter 68.00 20.40
Lubricant 0.0150 liter 220.00 3.30
Subtotal-A: 247.60
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 252.55
Note : Rates of all items should be inclusive of all supply and carriage. Page: 22 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
2.04.1.1 Upto 20m lead from center line of the embankment cum
Ordinary Labour 0.2000 day 370.00 74.00
Skilled Labour 0.0040 day 450.00 1.80
Subtotal-A: 75.80
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 77.32
2.04.1.2 Lead more than 20m from center line of the embankment cum
Ordinary Labour 0.2500 day 370.00 92.50
Skilled Labour 0.0040 day 450.00 1.80
Subtotal-A: 94.30
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 96.19
Note : Rates of all items should be inclusive of all supply and carriage. Page: 23 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 124.75
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 127.25
Note : Rates of all items should be inclusive of all supply and carriage. Page: 24 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
2.04.3 EWEx(Dr): Earth work in re-excavation of Beel, River & Beel connectivity cum
(Canal) etc. by small dredging unit according to the lines, grades and
elevation as shown in the drawing, fitting of cutter machine, delivery
pipe fitting, soil management, filling chamber, village platform and
disposing of all excavated materials at a safe distance designated by the
E-I-C in all types of clay/slurry/organic soils except rocky, gravelly,
slushy soil, levelling, dressing, etc. all complete for an initial soil
dumping lead upto 100m including arranging for and supplying all
necessary tools and equipment at work site etc. complete as per
direction of the E-I-C.
H.C. of Excavator (Medium Size) 0.0040 day 8880.00 35.52
Ordinary Labour 0.0060 day 370.00 2.22
Diesel 0.3700 liter 68.00 25.16
Lubricant 0.0109 liter 220.00 2.40
Operator 0.0030 day 570.00 1.71
Subtotal-A: 67.01
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 68.35
Note : Rates of all items should be inclusive of all supply and carriage. Page: 25 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 57.63
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 58.79
Note : Rates of all items should be inclusive of all supply and carriage. Page: 26 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
2.05.1 Leveling and dressing the embankment crown, road flanks, etc. in sqm
maintenance work by earth cutting and filling as necessary with
maintaining proper slope and camber including compaction etc. all
complete as per direction of the E-I-C.
Ordinary Labour 0.0200 day 370.00 7.40
Sardar 0.0020 day 800.00 1.60
Subtotal-A: 9.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 9.18
2.06.1 Turfing on embankment top and slope, building compound with good sqm
quality turf supplied by the contractor of not less than 225mm square in
dimension including placing and watering till grass is fully grown, etc. all
complete as per direction of the E-I-C (payment to be made only when
grass is fully grown).
Turf 1.0000 m2 5.00 5.00
Ordinary Labour 0.0450 day 370.00 16.65
Subtotal-A: 21.65
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 22.08
Note : Rates of all items should be inclusive of all supply and carriage. Page: 27 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
2.06.2 Supplying and planting vertiver (Binna) grass in a bunch of 2 to 3 stem sqm
@of 225mm c/c all over the side slope starting from 225mm beyond the
edge of the shoulder and watering till the grasses are fully grown etc. all
complete as per direction of E-I-C. The stem should be 125mm to
150mm long with roots. (The payment is to be made only when grasses
are fully grown)
Ordinary Labour 0.0650 day 370.00 24.05
Vertiver (binna) Grass 1.0000 m2 11.00 11.00
Subtotal-A: 35.05
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 35.75
Note : Rates of all items should be inclusive of all supply and carriage. Page: 28 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.01.1 BP: Preparation of bed by cutting and filling including watering to bring sqm
moisture content ± 2% of OMC & compacting by appropriate
mechanical means etc. to obtain design CBR at minimum compaction
98% of MDD etc. all complete as per direction of the E-I-C
Mason 0.0050 day 550.00 2.75
Ordinary Labour 0.0080 day 370.00 2.96
H.C. of Water Tanker (Towed by Tractor) 0.0004 day 1500.00 0.60
H.C. of Water Pump 0.0004 day 500.00 0.20
H.C. of 3 Wheel Static Road roller (8-10 ton) 0.0008 day 3500.00 2.80
Diesel 0.0060 liter 68.00 0.41
Lubricant 0.0006 liter 220.00 0.13
Subtotal-A: 9.85
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 10.05
Note : Rates of all items should be inclusive of all supply and carriage. Page: 29 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.01.2 BC(150mm): Earth work in box cutting on road crest up to 150mm sqm
depth, maintaining proper grade, camber and alignment, super
elevation on curves, removing soil to a safe distance, watering, if
necessary, spreading the excavated earth on road flanks and slopes
uniformly including leveling, dressing, manual compacting, etc. all
complete as per direction of the E-I-C.
Ordinary Labour 0.0500 day 370.00 18.50
Subtotal-A: 18.50
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 18.87
3.01.3.1 BC(300mm): Earth work in box cutting on road crest up to 300mm sqm
depth, maintaining proper grade, camber and alignment, super
elevation on curves, removing soil to a safe distance, watering, if
necessary, spreading the excavated earth on road flanks and slopes
uniformly including leveling, dressing, compacting the sub-grade by
manual labour, etc. all complete as per direction of the E-I-C.
Mason 0.0050 day 550.00 2.75
Ordinary Labour 0.0950 day 370.00 35.15
Subtotal-A: 37.90
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 38.66
Note : Rates of all items should be inclusive of all supply and carriage. Page: 30 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.01.3.2 BC&SGC(300mm): Earth work in box cutting on road crest up to 300mm sqm
depth, maintaining proper grade, camber and alignment, super
elevation on curves, removing soils to a safe distance or if necessary,
spreading the excavated earth on road flanks and slopes uniformly
including leveling, dressing, watering to bring moisture content ± 2% of
OMC & compacting the sub-grade by appropriate mechanical means to
attain design CBR at minimum compaction 98% of MDD (Standard) etc.
all complete as per direction of the E-I-C.
Mason 0.0100 day 550.00 5.50
Ordinary Labour 0.0900 day 370.00 33.30
H.C. of Water Tanker (Towed by Tractor) 0.0005 day 1500.00 0.75
H.C. of Water Pump 0.0005 day 500.00 0.25
H.C. of 3 Wheel Static Road roller (8-10 ton) 0.0009 day 3500.00 3.15
Diesel 0.0090 liter 68.00 0.61
Lubricant 0.0008 liter 220.00 0.18
Subtotal-A: 43.74
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 44.61
Note : Rates of all items should be inclusive of all supply and carriage. Page: 31 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.01.3.3 BC&SGP(300mm): Earth work in box cutting up to 300mm depth & sqm
Preparation of sub-grade by excavating road crest up to 300mm depth,
removing soils to a safe distance or spreading it on road flanks, slopes.
In preparing 300mm sub-grade below the box, excavating top 150mm
layer and excavated earth set aside to reuse, then scarifying the bottom
150 mm layer, breaking clods to 40mm maximum in size, leveling,
dressing, watering to OMC ± 2% & compacting the 1st layer by
appropriate mechanical means to attain design CBR at minimum
compaction 98% of Standard proctor, subsequently prepare 2nd layer
by spreading aside materials on top of prepared 1st layer, removing all
deleterious material breaking clods, leveling, dressing, watering to OMC
± 2% and compacting the layer following the same procedure as 1st
layer including maintaining proper grade, camber and alignment, super
elevation on curves etc. all complete as per direction of the E-I-C.
(When in-situ sub grade materials is suitable but very loose)
Mason 0.0150 day 550.00 8.25
Ordinary Labour 0.1800 day 370.00 66.60
H.C. of Water Tanker (Towed by Tractor) 0.0008 day 1500.00 1.25
H.C. of Water Pump 0.0008 day 500.00 0.42
H.C. of 3 Wheel Static Road roller (8-10 ton) 0.0017 day 3500.00 5.78
Diesel 0.0165 liter 68.00 1.12
Lubricant 0.0016 liter 220.00 0.35
Subtotal-A: 83.76
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 85.43
Note : Rates of all items should be inclusive of all supply and carriage. Page: 32 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.01.4.1 BC(450mm): Earth work in box cutting on road crest up to 450mm sqm
depth, maintaining proper grade, camber and alignment, super
elevation on curves, removing soil to a safe distance, spreading the
excavated earth on road flanks and slopes uniformly including leveling,
dressing, watering, compacting the sub-grade by manual labour, etc. all
complete as per direction of the E-I-C.
Mason 0.0100 day 550.00 5.50
Ordinary Labour 0.1340 day 370.00 49.58
Subtotal-A: 55.08
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 56.18
Note : Rates of all items should be inclusive of all supply and carriage. Page: 33 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.01.4.2 BC&SGC(450mm): Earth work in box cutting on road crest up to 450mm sqm
depth, maintaining proper grade, camber and alignment, super
elevation on curves, removing soils to a safe distance or if necessary,
spreading the excavated earth on road flanks and slopes uniformly
including leveling, dressing, watering to bring moisture content ± 2% of
OMC & compacting the sub-grade by appropriate mechanical means to
attain design CBR at minimum compaction 98% of MDD (Standard) etc.
all complete as per direction of the E-I-C.
Mason 0.0100 day 550.00 5.50
Ordinary Labour 0.1340 day 370.00 49.58
H.C. of Water Tanker (Towed by Tractor) 0.0005 day 1500.00 0.75
H.C. of Water Pump 0.0005 day 500.00 0.25
H.C. of 3 Wheel Static Road roller (8-10 ton) 0.0009 day 3500.00 3.15
Diesel 0.0090 liter 68.00 0.61
Lubricant 0.0008 liter 220.00 0.18
Subtotal-A: 60.02
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 61.22
Note : Rates of all items should be inclusive of all supply and carriage. Page: 34 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.01.4.3 BC&SGP(450mm): Earth work in box cutting up to 450mm depth & sqm
Preparation of sub-grade by excavating road crest up to 450mm depth,
removing soils to a safe distance or spreading it on road flanks, slopes.
In preparing 300mm sub-grade below the box, excavating top 150mm
layer and excavated earth set aside to reuse, then scarifying the bottom
150 mm layer, breaking clods to 40mm maximum in size, leveling,
dressing, watering to OMC ± 2% & compacting the 1st layer by
appropriate mechanical means to attain design CBR at minimum
compaction 98% of Standard proctor, subsequently prepare 2nd layer
by spreading aside materials on top of prepared 1st layer, removing all
deleterious material breaking clods, leveling, dressing, watering to OMC
± 2% and compacting the layer following the same procedure as 1st
layer including maintaining proper grade, camber and alignment, super
elevation on curves etc. all complete as per direction of the E-I-C.
(When in-situ sub grade materials is suitable but very loose)
Mason 0.0200 day 550.00 11.00
Ordinary Labour 0.2200 day 370.00 81.40
H.C. of Water Tanker (Towed by Tractor) 0.0008 day 1500.00 1.25
H.C. of Water Pump 0.0008 day 500.00 0.42
H.C. of 3 Wheel Static Road roller (8-10 ton) 0.0017 day 3500.00 5.78
Diesel 0.0165 liter 68.00 1.12
Lubricant 0.0016 liter 220.00 0.35
Subtotal-A: 101.31
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 103.34
Note : Rates of all items should be inclusive of all supply and carriage. Page: 35 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.02.1.1 Sand (FM 0.50) filling on the road bed in the improved sub-grade with cum
sand free from dust, earth, other vegetable growth and foreign
materials including supplying all materials, spreading, watering,
compacting by appropriate mechanical means to obtain a minimum
Soaked CBR 8% or Design CBR at minimum compaction 98% of MDD
(Modified), etc. all complete as per direction of the E-I-C.
Sand (FM - 0.5) 1.1500 m3 420.00 483.00
Ordinary Labour 0.1000 day 370.00 37.00
H.C. of Vibratory Road Roller (8-10 ton) 0.0080 day 3000.00 24.00
Diesel 0.0400 liter 68.00 2.72
Lubricant 0.0035 liter 220.00 0.77
Subtotal-A: 547.49
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 558.44
Note : Rates of all items should be inclusive of all supply and carriage. Page: 36 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.02.1.2 Sand (FM 0.80) filling on the road bed in the improved sub-grade with cum
sand free from dust, earth, other vegetable growth and foreign
materials including supplying all materials, spreading, watering,
compacting by appropriate mechanical means to obtain a minimum
Design Soaked CBR but not less than 8% at minimum compaction 98%
of MDD (Modified), etc. all complete as per direction of the E-I-C.
Sand (FM - 0.8) 1.1500 m3 480.00 552.00
Ordinary Labour 0.1000 day 370.00 37.00
H.C. of Vibratory Road Roller (8-10 ton) 0.0080 day 3000.00 24.00
Diesel 0.0400 liter 68.00 2.72
Lubricant 0.0035 liter 220.00 0.77
Subtotal-A: 616.49
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 628.82
Note : Rates of all items should be inclusive of all supply and carriage. Page: 37 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.02.1.3 Filling the road bed in the improved sub-grade with locally available cum
sand (passing <=15% through #200 sieve) free from dust, earth clod,
other vegetable growth and foreign materials including supplying all
materials, spreading, watering, compacting by appropriate mechanical
means to obtain a minimum Soaked CBR 8% or Design CBR at minimum
compaction 98% of MDD (Modified), etc. all complete as per direction of
the E-I-C.
Local Sand (Sieve # 200 passing not more than 15%) 1.1500 m3 350.00 402.50
Ordinary Labour 0.1000 day 370.00 37.00
H.C. of Vibratory Road Roller (8-10 ton) 0.0080 day 3000.00 24.00
Diesel 0.0400 liter 68.00 2.72
Lubricant 0.0035 liter 220.00 0.77
Subtotal-A: 466.99
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 476.33
3.02.2 PiISG: Labour charge for taking out the existing sand from road bed of cum
any thickness and removing the debris including staking the materials at
a specified distance, etc. all complete as per direction of the E-I-C.
Ordinary Labour 0.1500 day 370.00 55.50
Subtotal-A: 55.50
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 56.61
Note : Rates of all items should be inclusive of all supply and carriage. Page: 38 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.02.3 CISG: Labour for spreading & compaction of Improved Subgrade cum
consisting of sand having compacted thickness as per specifications
including local handling, hand packing, watering, dry rolling followed by
wet rolling in layers of specified loose thickness with 8~10 tonne road
roller to achieve Design Soaked CBR but not less than 8% at a degree
of compaction to minimum 98% (Modified Proctor ) etc all complete as
per direction of the Engineering-in-charge. Thickness of each layer
should not be more than 125mm loose and Payment will be made on
compacted thickness. (The rate excludes the cost of sand)
Ordinary Labour 0.1000 day 370.00 37.00
H.C. of Vibratory Road Roller (8-10 ton) 0.0080 day 3000.00 24.00
Diesel 0.0400 liter 68.00 2.72
Lubricant 0.0035 liter 220.00 0.77
Subtotal-A: 64.49
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 65.78
Note : Rates of all items should be inclusive of all supply and carriage. Page: 39 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.03.1 Dis(SB/BC): Dismantling of damaged sub-base and Base course works cum
in flexible paved road of any thickness by appropriate mechanical means
and removing the debris to a safe distance, stacking properly including
all tools and plants, etc. all complete as per direction of the E-I-C.
Ordinary Labour 0.1500 day 370.00 55.50
H.C. of Excavator (Medium Size) 0.0055 day 8880.00 48.84
Diesel 0.0600 liter 68.00 4.08
Lubricant 0.0070 liter 220.00 1.54
Subtotal-A: 109.96
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 112.16
Note : Rates of all items should be inclusive of all supply and carriage. Page: 40 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.03.2 S&C(SB): Labour for mixing, spreading & compacting of Sub-base cum
consisting of sand and crusher run aggregate made of well burnt picked
1st class bricks or stone having compacted thickness as per
specifications including local handling, hand packing, watering, dry
rolling followed by wet rolling in layers of specified loose thickness with
8~10 tonne road roller to achieve Design soaked CBR but not less than
30% at a degree of compaction to minimum 98% (Modified Proctor)
etc. all complete as per direction of the Engineering-in-charge.
Thickness of each layer should not be more than 100mm loose and
Payment will be made on compacted thickness. (The rate excludes the
cost of sand, brick/stone aggregates)
Mason 0.0100 day 550.00 5.50
Skilled Labour 0.1000 day 450.00 45.00
Ordinary Labour 0.2500 day 370.00 92.50
H.C. of Water Tanker (Towed by Tractor) 0.0100 day 1500.00 15.00
H.C. of Water Pump 0.0100 day 500.00 5.00
H.C. of Vibratory Road Roller (8-10 ton) 0.0100 day 3000.00 30.00
Diesel 0.1200 liter 68.00 8.16
Lubricant 0.0100 liter 220.00 2.20
Subtotal-A: 203.36
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 207.43
Note : Rates of all items should be inclusive of all supply and carriage. Page: 41 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 2435.85
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 2484.57
Note : Rates of all items should be inclusive of all supply and carriage. Page: 42 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 2389.30
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 2437.09
Note : Rates of all items should be inclusive of all supply and carriage. Page: 43 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 2112.66
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 2154.91
Note : Rates of all items should be inclusive of all supply and carriage. Page: 44 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 2475.75
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 2525.27
Note : Rates of all items should be inclusive of all supply and carriage. Page: 45 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 3225.24
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 3289.74
Note : Rates of all items should be inclusive of all supply and carriage. Page: 46 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Note : Rates of all items should be inclusive of all supply and carriage. Page: 47 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 3926.31
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 4004.84
Note : Rates of all items should be inclusive of all supply and carriage. Page: 48 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 583.16
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 594.82
Note : Rates of all items should be inclusive of all supply and carriage. Page: 49 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 623.06
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 635.52
Note : Rates of all items should be inclusive of all supply and carriage. Page: 50 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.04.1.1 PiEE(75mm): Labour charge for picking up the existing brick on end m
edging (75mm across) including staking the materials at a specified
distance, etc. all complete as per direction of the E-I-C.
Ordinary Labour 0.0140 day 370.00 5.18
Subtotal-A: 5.18
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 5.28
3.04.1.2 PiEE(125mm): Labour charge for picking up the existing brick on end m
edging (125mm across) including staking the materials at a specified
distance, etc. all complete as per direction of the E-I-C.
Ordinary Labour 0.0270 day 370.00 9.99
Subtotal-A: 9.99
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 10.19
Note : Rates of all items should be inclusive of all supply and carriage. Page: 51 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.04.2.1 ReEE(75mm): Labour charge for Resetting the brick on end edging m
(75mm across) with 1st class/picked bricks, including cutting trenches
true to level & grade, removing earth, re-filling & ramming the sides
properly, including supplying and filling the gaps with local sand, etc. all
complete as per direction of the E-I-C.
Sand (FM - 0.5) 0.0020 m3 420.00 0.84
Mason 0.0030 day 550.00 1.65
Ordinary Labour 0.0200 day 370.00 7.40
Subtotal-A: 9.89
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 10.09
3.04.2.2 ReEE(125mm): Labour charge for Resetting the brick on end edging m
(125mm across) with 1st class/picked bricks including cutting trenches
true to level & grade, removing earth, re-filling & ramming the sides
properly, including supplying and filling the gaps with local sand, etc. all
complete as per direction of the E-I-C.
Sand (FM - 0.5) 0.0050 m3 420.00 2.10
Mason 0.0040 day 550.00 2.20
Ordinary Labour 0.0330 day 370.00 12.21
Subtotal-A: 16.51
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 16.84
Note : Rates of all items should be inclusive of all supply and carriage. Page: 52 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.04.3.1 EE(75mm): Brick on end edging (75mm across) with 1st class/picked m
bricks including cutting trenches true to level & grade, removing earth,
re-filling & ramming the sides properly, including supplying and filling
the gaps with local sand, etc. all complete as per direction of the E-I-C.
1st Class Brick 8.0000 each 9.00 72.00
Sand (FM - 0.5) 0.0020 m3 420.00 0.84
Mason 0.0030 day 550.00 1.65
Ordinary Labour 0.0150 day 370.00 5.55
Subtotal-A: 80.04
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 81.64
Note : Rates of all items should be inclusive of all supply and carriage. Page: 53 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.04.3.2 EE(125mm): Brick on end edging (125mm across) with 1st class/picked m
bricks including cutting trenches true to level & grade, removing earth,
re-filling & ramming the sides properly, including supplying and filling
the gaps with local sand, etc. all complete as per direction of the E-I-C.
1st Class Brick 14.0000 each 9.00 126.00
Sand (FM - 0.5) 0.0050 m3 420.00 2.10
Mason 0.0040 day 550.00 2.20
Ordinary Labour 0.0300 day 370.00 11.10
Subtotal-A: 141.40
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 144.23
3.05.1 S&SBC: Supplying and spreading 1st class and picked brick chips (LAA
value not exceeding 40) including cost of bricks carrying breaking into
specified sizes including screening & specified sizes spreading uniformly
on the road surface maintaining grade, camber and super elevation, etc.
all complete as per direction of the E-I-C.
Note : Rates of all items should be inclusive of all supply and carriage. Page: 54 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 3015.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 3075.30
Subtotal-A: 2916.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 2974.32
Note : Rates of all items should be inclusive of all supply and carriage. Page: 55 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 2826.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 2882.52
Subtotal-A: 2767.50
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 2822.85
Note : Rates of all items should be inclusive of all supply and carriage. Page: 56 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 2718.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 2772.36
3.05.2 B&SBC: Labour charge for breaking and spreading 1st class & picked
brick chips including cost of bricks carrying, breaking into specified sizes
including screening & spreading uniformly on the road surface
maintaining grade, camber and super elevation, etc. all complete as per
direction of the E-I-C.
Subtotal-A: 337.50
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 344.25
Note : Rates of all items should be inclusive of all supply and carriage. Page: 57 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 270.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 275.40
Subtotal-A: 225.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 229.50
Subtotal-A: 202.50
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 206.55
Note : Rates of all items should be inclusive of all supply and carriage. Page: 58 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 180.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 183.60
3.05.3 S&SSC: Supplying and spreading stone chips of LAA value not exceeding
35% [Preferably stone chips from Madhyapara, Dinajpur], to be
obtained from boulders including cost of boulders carrying breaking into
specified sizes including screening & specified sizes & spreading
uniformly on the road surface maintaining grade, camber and super
elevation, etc. all complete as per direction of the E-I-C.
Subtotal-A: 4145.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 4227.90
Note : Rates of all items should be inclusive of all supply and carriage. Page: 59 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 4055.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 4136.10
Subtotal-A: 3965.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 4044.30
Note : Rates of all items should be inclusive of all supply and carriage. Page: 60 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 3852.50
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 3929.55
Subtotal-A: 3740.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 3814.80
Note : Rates of all items should be inclusive of all supply and carriage. Page: 61 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.05.4.1 S&SBC(WG): Supplying and spreading 50mm down graded crusher run cum
1st class and Picked brick chips of LAA value not exceeding 40%
including supplying of required amount of 12mm down graded chips
made of same quality bricks to fill the voids including cost of materials,
spreading uniformly in layers of specified loose thickness on road
surface maintaining grade, camber and super elevation, etc. all
complete as per direction of the E-I- C. Measurement will be made on
loose volume.
1st Class/ Picked Brick chips (50mm down graded) 0.9000 m3 2730.00 2457.00
1st Class Brick Chips (10mm down graded) 0.1000 m3 3049.00 304.90
Skilled Labour 0.0400 day 450.00 18.00
Ordinary Labour 0.2000 day 370.00 74.00
Subtotal-A: 2853.90
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 2910.98
Note : Rates of all items should be inclusive of all supply and carriage. Page: 62 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.05.4.2 S&SSC(WG): Supplying and spreading 50mm down graded crusher run cum
stone chips of LAA value not exceeding 35% including supplying of
required amount of 12mm down graded chips made of same quality
stone to fill the voids including cost of materials, spreading uniformly in
layers of specified loose thickness on road surface maintaining grade,
camber and super elevation, etc. all complete as per direction of the E-I-
C. Measurement will be made on loose volume.
Stone Chips (50mm down graded) [LAA≤35] 0.6000 cum 4730.00 2838.00
Stone Chips (12mm down graded) [LAA≤35] 0.4000 cum 4320.00 1728.00
Skilled Labour 0.0400 day 450.00 18.00
Ordinary Labour 0.2000 day 370.00 74.00
Subtotal-A: 4658.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 4751.16
3.05.5 B&SCS: Labour charge for breaking and spreading the concrete slab into
pieces, salvaged from existing RCC pavement, breaking into specified
sizes including screening & stacking properly in measurable stacks (max
stack height 0.5m) at site, etc. all complete including dismantling
existing concrete pavement as per direction of the E-I-C.
Note : Rates of all items should be inclusive of all supply and carriage. Page: 63 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 1237.50
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 1262.25
Subtotal-A: 1125.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 1147.50
Subtotal-A: 900.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 918.00
Note : Rates of all items should be inclusive of all supply and carriage. Page: 64 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 787.50
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 803.25
Subtotal-A: 675.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 688.50
Note : Rates of all items should be inclusive of all supply and carriage. Page: 65 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.05.6 CWBM(iSSM): Labour charge for compacted WBM base course with cum
crusher run aggregate made of well burnt picked and 1st class bricks or
stone having compacted thickness as per specifications including local
handling, hand packing, watering, dry rolling followed by wet rolling in
layers of specified loose thickness with 8~10 tonne road roller to attain
minimum soaked CBR 80% or Design CBR at minimum degree of
compaction 98% of MDD (Modified Proctor) including supplying
choking/screening material as filler material @0.012cum/sqm or as
required etc. all complete as per direction of the Engineering-in-charge.
After adequate dry rolling, spreading of choking/screening material on
the surface, sprinkling of water and rolling is to be continued until all the
voids are filled, wave of grout/slurry flushes ahead of the roller.
Thickness of each layer should not be more than 100mm loose and
Payment will be made on compacted thickness. The rate excludes the
cost of brick aggregates.
Sand (FM - 0.8) 0.1000 m3 480.00 48.00
Head Mason 0.0010 day 650.00 0.65
Skilled Labour 0.0100 day 450.00 4.50
Ordinary Labour 0.1800 day 370.00 66.60
H.C. of Vibratory Road Roller (8-10 ton) 0.0220 day 3000.00 66.00
H.C. of Water Tanker (Truck Mounted) 0.0180 day 2500.00 45.00
Diesel 0.1500 liter 68.00 10.20
Lubricant 0.0100 liter 220.00 2.20
Subtotal-A: 243.15
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 248.01
Note : Rates of all items should be inclusive of all supply and carriage. Page: 66 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.05.7.1 WBMBC: Providing compacted brick aggregate base course, including cum
supplying, spreading and compacting 50mm down graded crusher run
1st class and Picked brick chips (LAA value not exceeding 40%)
including supplying of required amount of 12mm down graded chips
made of same quality bricks, including spreading uniformly in layers of
specified loose thickness on road surface maintaining grade, camber
and super elevation including local handling, hand packing, booming,
watering, dry rolling followed by wet rolling in layers with 8~10 tonne
road roller to attain minimum soaked CBR 80% or Design CBR at
minimum degree of compaction 98% of MDD (Modified Proctor),
including supplying choking/screening material as filler material
@0.018cum/sqm or as required including cost of materials, labours etc.
all complete as per direction of the E-I-C. After adequate dry rolling
spreading of choking/screening material on the surface, sprinkling water
and rolling is to be continued until all the voids are filled, wave of
grout/slurry flushes ahead of the roller. Thickness of each layer should
not be more than 100mm loose and measurement for Payment will be
made on compacted thickness.
1st Class/ Picked Brick chips (50mm down graded) 1.0900 m3 2730.00 2975.70
1st Class Brick Chips (10mm down graded) 0.1400 m3 3049.00 426.86
Skilled Labour 0.2000 day 450.00 90.00
Ordinary Labour 0.4500 day 370.00 166.50
Sand (FM - 0.5) 0.1200 m3 420.00 50.40
Head Mason 0.0020 day 650.00 1.30
H.C. of Vibratory Road Roller (8-10 ton) 0.0220 day 3000.00 66.00
H.C. of Water Tanker (Truck Mounted) 0.0180 day 2500.00 45.00
Diesel 0.1500 liter 68.00 10.20
Lubricant 0.0100 liter 220.00 2.20
Subtotal-A: 3834.16
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 3910.84
Note : Rates of all items should be inclusive of all supply and carriage. Page: 67 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
IT 4% of Total 191.20
Total: 4779.92
Note : Rates of all items should be inclusive of all supply and carriage. Page: 68 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.05.7.2 WMMBC: Providing compacted brick aggregate WMM base course, cum
including supplying, spreading and compacting 38mm down graded
aggregates as specified in the relevant item of LGED road design
standard or wet mix macadam specification (LAA value not exceeding
40% ) made of 1st class and Picked bricks, combining brick chips of
different sizes to provide requisite grading and premixing the material
with water at OMC in mechanical mix plant at stack yard including
carriage of mixed material by tipper with proper covering to site, laying
in uniform layers of specified loose thickness not more than 100mm
with Grader in base course on well prepared surface and compacting
with 8~10 tonne Vibratory road roller to attain minimum soaked CBR
80% or Design CBR at a degree of minimum compaction 98% (Modified
Proctor) including supplying all materials, carriage, labors, tools &
equipment etc. all complete as per direction of the E-I-C
1st Class/ Picked Brick chips (40mm down graded) 0.4500 m3 2786.00 1253.70
1st Class Picked Brick Chips (20mm down graded) 0.7500 m3 2940.00 2205.00
Sand (FM - 0.5) 0.1500 m3 420.00 63.00
Ordinary Labour 0.3000 day 370.00 111.00
Skilled Labour 0.2000 day 450.00 90.00
Head Mason 0.0050 day 650.00 3.25
H.C. of Mixing Machine for Aggregate 0.0040 day 8000.00 32.00
H.C. of Dump Truck/ Tripping Trucks 0.0300 day 4500.00 135.00
H.C. of Motor Graders (14 tons) 0.0020 day 6000.00 12.00
H.C. of Vibratory Road Roller (8-10 ton) 0.0300 day 3000.00 90.00
H.C. of Water Tanker (Truck Mounted) 0.0020 day 2500.00 5.00
Stackyard Rent 1.0000 m3 6.48 6.48
Diesel 0.8000 liter 68.00 54.40
Lubricant 0.0600 liter 220.00 13.20
Subtotal-A: 4074.03
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 4155.51
Note : Rates of all items should be inclusive of all supply and carriage. Page: 69 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Note : Rates of all items should be inclusive of all supply and carriage. Page: 70 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 4808.10
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 4904.26
Note : Rates of all items should be inclusive of all supply and carriage. Page: 71 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
IT 4% of Total 239.76
Total: 5994.10
Note : Rates of all items should be inclusive of all supply and carriage. Page: 72 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 5196.13
Note : Rates of all items should be inclusive of all supply and carriage. Page: 73 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 5300.05
3.06.1.1 PCHD@1.2: Providing Prime coat @1.2 liter/sqm with cut back bitumen sqm
to be prepared by cutting back 60/70 or 80/100 penetration grade
straight run bitumen (conforming to the requirements of ASTM/
AASHTO in the ratio of 100 parts by volume of bitumen to 40-60 parts
by volume of kerosene depending on the porosity of the surface and will
be decided by field trials, the correct quantity that is completely
absorbed within 24 hours including carefully cleaning of the surface of
the granular base material to be primed and spraying cut back bitumen
at a temperature from 100°C to 120°C by appropriate hand device, etc.
complete as per direction of the E-I-C.
Bitumen [Grade 80/100] 0.8000 kg 49.00 39.20
Kerosene 0.4000 litre 72.00 28.80
Fire wood 0.6400 kg 7.75 4.96
Mason 0.0001 day 550.00 0.06
Skilled Labour 0.0010 day 450.00 0.45
Ordinary Labour 0.0070 day 370.00 2.59
Subtotal-A: 76.06
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 77.58
Note : Rates of all items should be inclusive of all supply and carriage. Page: 74 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.06.1.2 PCMD@1.2: Providing Prime coat @1.2 liter/sqm with cut back bitumen sqm
to be prepared by cutting back 60/70 or 80/100 penetration grade
straight run bitumen (conforming to the requirements of ASTM/
AASHTO in the ratio of 100 parts by volume of bitumen to 40-60 parts
by volume of kerosene depending on the porosity of the surface and will
be decided by field trials, the correct quantity that is completely
absorbed within 24 hours including carefully cleaning of the surface of
the granular base material to be primed and spraying cut back bitumen
at a temperature from 100°C to 120°C by mechanical distributor, etc.
complete as per direction of the E-I-C.
Bitumen [Grade 80/100] 0.8000 kg 49.00 39.20
Fire wood 0.6400 kg 7.75 4.96
Kerosene 0.4000 litre 72.00 28.80
Mason 0.0001 day 550.00 0.06
Skilled Labour 0.0010 day 450.00 0.45
Ordinary Labour 0.0060 day 370.00 2.22
H.C. of Distributor 0.0003 day 3750.00 1.01
Diesel 0.0025 liter 68.00 0.17
Lubricant 0.0003 liter 220.00 0.06
Subtotal-A: 76.92
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 78.46
Note : Rates of all items should be inclusive of all supply and carriage. Page: 75 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.06.2.1 TCHD@0.5: Providing tack coat @0.50kg/sqm with 60/70 or 80/100 sqm
penetration grade straight run bitumen complying with the requirements
of ASTM/AASHTO applied by appropriate hand device at a temperature
between 175°C and 185°C including heating bitumen, surface cleaning,
etc. all complete as per direction of the E-I-C.
Bitumen [Grade 80/100] 0.5000 kg 49.00 24.50
Fire wood 0.4000 kg 7.75 3.10
Mason 0.0001 day 550.00 0.06
Skilled Labour 0.0010 day 450.00 0.45
Ordinary Labour 0.0070 day 370.00 2.59
Subtotal-A: 30.70
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 31.31
Note : Rates of all items should be inclusive of all supply and carriage. Page: 76 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.06.2.2 TCHD@0.75: Providing tack coat @0.75kg/sqm with 60/70 or 80/100 sqm
penetration grade straight run bitumen complying with the requirements
of ASTM/AASHTO applied by appropriate hand device at a temperature
between 175°C and 185°C including heating bitumen, surface cleaning,
etc. all complete as per direction of the E-I-C.
Bitumen [Grade 80/100] 0.7500 kg 49.00 36.75
Fire wood 0.6000 kg 7.75 4.65
Mason 0.0001 day 550.00 0.06
Skilled Labour 0.0010 day 450.00 0.45
Ordinary Labour 0.0070 day 370.00 2.59
Subtotal-A: 44.50
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 45.38
Note : Rates of all items should be inclusive of all supply and carriage. Page: 77 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.06.2.3 TCMD@0.5: Providing tack coat @0.50kg/sqm with 60/70 or 80/100 sqm
penetration grade straight run bitumen complying with the requirements
of ASTM/AASHTO applied by mechanical distributor at a temperature
between 175°C and 185°C including heating bitumen, surface cleaning,
etc. all complete as per direction of the E-I-C.
Bitumen [Grade 80/100] 0.5000 kg 49.00 24.50
Fire wood 0.4000 kg 7.75 3.10
Mason 0.0010 day 550.00 0.55
Skilled Labour 0.0020 day 450.00 0.90
Ordinary Labour 0.0050 day 370.00 1.85
H.C. of Distributor 0.0003 day 3750.00 1.13
Diesel 0.0030 liter 68.00 0.20
Lubricant 0.0003 liter 220.00 0.07
Subtotal-A: 32.30
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 32.94
Note : Rates of all items should be inclusive of all supply and carriage. Page: 78 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.06.2.4 TCMD@0.75: Providing tack coat @0.75kg/sqm with 60/70 or 80/100 sqm
penetration grade straight run bitumen complying with the requirements
of ASTM/AASHTO applied by mechanical distributor at a temperature
between 175°C and 185°C including heating bitumen, surface cleaning,
etc. all complete as per direction of the E-I-C.
Bitumen [Grade 80/100] 0.7500 kg 49.00 36.75
Fire wood 0.6000 kg 7.75 4.65
Mason 0.0010 day 550.00 0.55
Skilled Labour 0.0020 day 450.00 0.90
Ordinary Labour 0.0050 day 370.00 1.85
H.C. of Distributor 0.0003 day 3750.00 1.13
Diesel 0.0030 liter 68.00 0.20
Lubricant 0.0003 liter 220.00 0.07
Subtotal-A: 46.10
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 47.02
Note : Rates of all items should be inclusive of all supply and carriage. Page: 79 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 90.65
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 92.46
Note : Rates of all items should be inclusive of all supply and carriage. Page: 80 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Note : Rates of all items should be inclusive of all supply and carriage. Page: 81 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 183.92
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 187.59
Note : Rates of all items should be inclusive of all supply and carriage. Page: 82 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Note : Rates of all items should be inclusive of all supply and carriage. Page: 83 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Note : Rates of all items should be inclusive of all supply and carriage. Page: 84 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 293.11
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 298.97
Note : Rates of all items should be inclusive of all supply and carriage. Page: 85 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Note : Rates of all items should be inclusive of all supply and carriage. Page: 86 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 323.92
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 330.40
Note : Rates of all items should be inclusive of all supply and carriage. Page: 87 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Note : Rates of all items should be inclusive of all supply and carriage. Page: 88 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 464.38
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 473.67
Note : Rates of all items should be inclusive of all supply and carriage. Page: 89 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Note : Rates of all items should be inclusive of all supply and carriage. Page: 90 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
5 tons)
Diesel 0.0280 liter 68.00 1.90
Lubricant 0.0028 liter 220.00 0.62
Subtotal-A: 510.08
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 520.28
Note : Rates of all items should be inclusive of all supply and carriage. Page: 91 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Note : Rates of all items should be inclusive of all supply and carriage. Page: 92 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 579.35
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 590.94
Note : Rates of all items should be inclusive of all supply and carriage. Page: 93 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 13187.72
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 13451.47
Note : Rates of all items should be inclusive of all supply and carriage. Page: 94 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 13414.28
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 13682.57
Note : Rates of all items should be inclusive of all supply and carriage. Page: 95 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.06.8 BMPM: Providing and Laying pre-mixed bituminous macadam with hot
mix plant using coarse aggregate, fine aggregate, filler and bituminous
binder as per design Job Mix Formula conforming Marshall Method as
per specification, LAA value of aggregate should be <=35%, water
absorption not >2%, flakiness index not >35% mixed with 60/70
penetration grade straight run bitumen satisfying the requirements of
ASTM/AASHTO. including screening, cleaning of chips and preparing
a uniform and quality mix in Hot Mix Plant and ensuring a homogenous
mix, in which all particles of the mineral aggregates are coated
uniformly, carrying the hot premixed materials by means of Dump/tipper
truck, spreading the mixed materials at specified laying temperature
with a hydrostatic paver finisher with sensor control to the required
grade, level and alignment over the prepared surface, tamping and
finishing the mix at specified compacted thickness, maintaining specified
camber, grade, super-elevation and cross section, through rolling with
appropriate Steel Drum Roller & pneumatic multiple tire roller (8-10
tons) to full compaction, for break down, inter - mediate and finished
rolling to achieve the desired density of at least 98% of that of
Laboratory Marshall specimen, hand packing and pinning to give an
even surface, including cost of all materials, their carriages, hire charges
of Hot Mix Plant and all other machines, equipments for construction
and quality control as per specification, fuels, lubricants and wages of
operational staff etc. all complete as per the direction of the E-I-C.
Note : Rates of all items should be inclusive of all supply and carriage. Page: 96 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.06.8.1 A. For Grading -1, [Bitumen Grade 60/70] (25mm nominal size, 50- cum
75mm thick.)
Stone Chips (16mm down graded) [LAA≤35] 0.2025 cum 4720.00 955.80
Stone Chips (12mm down graded) [LAA≤35] 0.3375 cum 4320.00 1458.00
Stone Chips (6mm down graded) [LAA≤35] 0.3375 cum 3690.00 1245.38
Stone Dust (2.38mm down) 0.1350 cum 1500.00 202.50
Bitumen [Grade 60/70] 92.0400 kg 51.00 4694.04
Mason 0.1600 day 550.00 88.00
Skilled Labour 0.2500 day 450.00 112.50
Ordinary Labour 0.4000 day 370.00 148.00
H.C. of Pneumatic Multiple Tired Roller (7 tires, 8-10 tons) 0.0600 day 3000.00 180.00
H.C. of Vibratory (Ride On) Roller 2 Steel Drum Compactor (3- 0.0600 day 3000.00 180.00
5 tons)
Diesel 5.5000 liter 68.00 374.00
Lubricant 0.6000 liter 220.00 132.00
Foreman 0.0400 day 800.00 32.00
Asphalt Plant 0.0600 day 10000.00 600.00
AC Paver 0.0600 day 6000.00 360.00
H.C. of Dump Truck/ Tripping Trucks 0.1000 day 4500.00 450.00
Stone Chips (25mm down graded) [LAA≤35] 0.3375 cum 4920.00 1660.50
Subtotal-A: 12872.72
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 13130.17
Note : Rates of all items should be inclusive of all supply and carriage. Page: 97 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.06.8.2 B. For Grading -2, [Bitumen Grade 60/70] (40mm nominal size, 75- cum
100mm thick.)
Stone Chips (20mm down graded) [LAA≤35] 0.2700 cum 4930.00 1331.10
Stone Chips (12mm down graded) [LAA≤35] 0.3375 cum 4320.00 1458.00
Stone Chips (6mm down graded) [LAA≤35] 0.3375 cum 3690.00 1245.38
Stone Dust (2.38mm down) 0.1350 cum 1500.00 202.50
Bitumen [Grade 60/70] 89.6800 kg 51.00 4573.68
Mason 0.1600 day 550.00 88.00
Skilled Labour 0.2500 day 450.00 112.50
Ordinary Labour 0.4000 day 370.00 148.00
H.C. of Pneumatic Multiple Tired Roller (7 tires, 8-10 tons) 0.0600 day 3000.00 180.00
H.C. of Vibratory (Ride On) Roller 2 Steel Drum Compactor (3- 0.0600 day 3000.00 180.00
5 tons)
Diesel 5.5000 liter 68.00 374.00
Lubricant 0.6000 liter 220.00 132.00
Foreman 0.0400 day 800.00 32.00
Asphalt Plant 0.0600 day 10000.00 600.00
AC Paver 0.0600 day 6000.00 360.00
H.C. of Dump Truck/ Tripping Trucks 0.1000 day 4500.00 450.00
Stone Chips (38mm down graded) [LAA≤35] 0.2700 cum 4850.00 1309.50
Subtotal-A: 12776.66
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 13032.19
Note : Rates of all items should be inclusive of all supply and carriage. Page: 98 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.07.1 PS: Providing and laying polythene sheet (0.18mm thick) on prepared sqm
road surface underneath the cement concrete, etc. all complete as per
specifications and direction of the Engineering-in-Charge.
0.18mm thick polythene sheet 1.0000 m2 12.31 12.31
Ordinary Labour 0.0010 day 370.00 0.37
Subtotal-A: 12.68
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 12.93
Note : Rates of all items should be inclusive of all supply and carriage. Page: 99 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Note : Rates of all items should be inclusive of all supply and carriage. Page: 100 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 6800.66
Form Work: ( +.75 % on Subtotal-A ) 51.00
Subtotal-A1: 6851.66
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 6988.69
Note : Rates of all items should be inclusive of all supply and carriage. Page: 101 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 7281.40
Form Work: ( +.75 % on Subtotal-A ) 54.61
Subtotal-A1: 7336.01
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 7482.73
Note : Rates of all items should be inclusive of all supply and carriage. Page: 103 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Note : Rates of all items should be inclusive of all supply and carriage. Page: 104 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
cum/hour
Hire and running charges of Concrete Vibrator 0.0600 day 400.00 24.00
H.C. of Backhoe End Loader (6 tons) 0.0083 day 6000.00 49.80
Hire and running charges of Concrete Pump (30 & 45 cum 0.0083 day 5000.00 41.50
capacity)
H.C. of Transit Mixer 4.0/4.5 cum capacity including fuel & 0.0200 day 10000.00 200.00
other related cost
Diesel 0.7000 liter 68.00 47.60
Sand (FM - 1.8) 0.1640 m3 970.00 159.08
Subtotal-A: 8686.82
Form Work: ( +.75 % on Subtotal-A ) 65.15
Subtotal-A1: 8751.97
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 8927.01
Note : Rates of all items should be inclusive of all supply and carriage. Page: 105 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Note : Rates of all items should be inclusive of all supply and carriage. Page: 106 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Hire and running charges of Batching and Mixing Plant @ 20 0.0083 day 23000.00 190.90
cum/hour
Hire and running charges of Concrete Vibrator 0.0600 day 400.00 24.00
H.C. of Backhoe End Loader (6 tons) 0.0083 day 6000.00 49.80
Hire and running charges of Concrete Pump (30 & 45 cum 0.0083 day 5000.00 41.50
capacity)
H.C. of Transit Mixer 4.0/4.5 cum capacity including fuel & 0.0200 day 10000.00 200.00
other related cost
Diesel 0.7000 liter 68.00 47.60
Subtotal-A: 9511.22
Form Work: ( +.75 % on Subtotal-A ) 71.33
Subtotal-A1: 9582.55
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 9774.21
Note : Rates of all items should be inclusive of all supply and carriage. Page: 107 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Note : Rates of all items should be inclusive of all supply and carriage. Page: 108 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 9588.01
Cost of Form Works/Shuttering, Prop/necessary ( +.75 % on Subtotal-A ) 71.91
supports, etc.
Subtotal-A1: 9659.92
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 9853.12
Note : Rates of all items should be inclusive of all supply and carriage. Page: 109 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 699.56
Form Work: ( +2.50 % on Subtotal-A ) 17.49
Subtotal-A1: 717.05
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 731.39
Note : Rates of all items should be inclusive of all supply and carriage. Page: 110 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Note : Rates of all items should be inclusive of all supply and carriage. Page: 111 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 130.00
Carriage, safe storage, mixing & sundries etc. ( +4.00 % on Subtotal-A ) 5.20
Subtotal-A1: 135.20
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 137.90
Note : Rates of all items should be inclusive of all supply and carriage. Page: 112 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 125.00
Carriage, safe storage, mixing & sundries etc. ( +4.00 % on Subtotal-A ) 5.00
Subtotal-A1: 130.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 132.60
Note : Rates of all items should be inclusive of all supply and carriage. Page: 113 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 135.00
Carriage, safe storage, mixing & sundries etc. ( +4.00 % on Subtotal-A ) 5.40
Subtotal-A1: 140.40
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 143.21
Note : Rates of all items should be inclusive of all supply and carriage. Page: 114 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 125.00
Carriage, safe storage, mixing & sundries etc. ( +4.00 % on Subtotal-A ) 5.00
Subtotal-A1: 130.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 132.60
Note : Rates of all items should be inclusive of all supply and carriage. Page: 115 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 135.00
Carriage, safe storage, mixing & sundries etc. ( +4.00 % on Subtotal-A ) 5.40
Subtotal-A1: 140.40
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 143.21
Note : Rates of all items should be inclusive of all supply and carriage. Page: 116 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.07.5.06 WRACA(T-F): Supply and use of water-reducing high range chemical litre
admixture in concrete, complying to ASTM C 494 Type F of approved
brand/origin/ manufacturer and supplied by only manufacturer's
authorised dealer with certificate of origin. An admixture that reduces
the quantity of mixing water required to produce concrete of a given
consistency by 12 or greater (flowing concrete) and for higher strength
of concrete
Water-reducing high range chemical admixture : Type-F 1.0000 liter 160.00 160.00
Subtotal-A: 160.00
Carriage, safe storage, mixing & sundries etc. ( +4.00 % on Subtotal-A ) 6.40
Subtotal-A1: 166.40
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 169.73
Note : Rates of all items should be inclusive of all supply and carriage. Page: 117 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.07.5.07 WRACA(T-G): Supply and use of water-reducing high range and litre
retarding chemical admixture in concrete, complying to ASTM C 494
Type G of approved brand/ origin/ manufacturer and supplied by only
manufacturer's authorised dealer with certificate of origin. An admixture
that reduces the quantity of mixing water required to produce concrete
of a given consistency by 12% or greater (flowing concrete) and retards
setting of concrete.
Water-reducing high range and retrading chemical admixture 1.0000 liter 160.00 160.00
: Type-G
Subtotal-A: 160.00
Carriage, safe storage, mixing & sundries etc. ( +4.00 % on Subtotal-A ) 6.40
Subtotal-A1: 166.40
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 169.73
3.08.1.1 PiBFS: Labour charge for picking up the existing brick flat (BFS) soling sqm
and staking the materials at a specified distance, etc. all complete as
per direction of the E-I-C.
Ordinary Labour 0.0330 day 370.00 12.21
Subtotal-A: 12.21
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 12.45
Note : Rates of all items should be inclusive of all supply and carriage. Page: 118 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.08.1.2 PiHBB: Labour charge for picking up the existing HBB and staking the sqm
materials at a specified distance, etc. all complete as per direction of the
E-I-C.
Ordinary Labour 0.0500 day 370.00 18.50
Subtotal-A: 18.50
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 18.87
3.08.2.1 ReBFS(FM-0.50): Labour charge for Resetting of Single layer brick flat sqm
soling (BFS) with 1st class or picked bricks, true to level, maintaining
camber/super elevation and grade including carrying bricks, supplying
and filling the interstices tightly with sand of minimum FM 0.50, etc. all
complete as per direction of the E-I-C.
Sand (FM - 0.5) 0.0120 m3 420.00 5.04
Mason 0.0100 day 550.00 5.50
Ordinary Labour 0.0500 day 370.00 18.50
Subtotal-A: 29.04
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 29.62
Note : Rates of all items should be inclusive of all supply and carriage. Page: 119 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.08.2.2 ReBFS(FM-0.80): Labour charge for Resetting of Single layer brick flat sqm
soling (BFS) with 1st class or picked bricks, true to level, maintaining
camber/super elevation and grade including carrying bricks, supplying
and filling the interstices tightly with sand of minimum FM 0.80, etc. all
complete as per direction of the E-I-C.
Sand (FM - 0.8) 0.0120 m3 480.00 5.76
Mason 0.0100 day 550.00 5.50
Ordinary Labour 0.0500 day 370.00 18.50
Subtotal-A: 29.76
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 30.36
Note : Rates of all items should be inclusive of all supply and carriage. Page: 120 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.08.2.3 ReBFS(FM<0.50): Labour charge for Resetting of Single layer brick flat sqm
soling (BFS) with 1st class or picked bricks, true to level, maintaining
camber/super elevation and grade including carrying bricks, supplying
and filling the interstices tightly with locally available sand (passing
<=15% through #200 sieve), etc. all complete as per direction of the E-
I-C.
Local Sand (Sieve # 200 passing not more than 15%) 0.0120 m3 350.00 4.20
Mason 0.0100 day 550.00 5.50
Ordinary Labour 0.0500 day 370.00 18.50
Subtotal-A: 28.20
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 28.76
Note : Rates of all items should be inclusive of all supply and carriage. Page: 121 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 59.71
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 60.90
Note : Rates of all items should be inclusive of all supply and carriage. Page: 122 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 61.39
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 62.62
Note : Rates of all items should be inclusive of all supply and carriage. Page: 123 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 57.75
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 58.91
Note : Rates of all items should be inclusive of all supply and carriage. Page: 124 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.08.4.1 SBFS(FM-0.50): Providing Single layer brick flat soling (BFS) with 1st sqm
class or picked bricks, true to level, maintaining camber/super elevation
and grade including carrying bricks, filling the interstices tightly with
sand of minimum FM 0.50, etc. all complete in all respect as per
approved drawing, specification and direction of the Engineer-in-charge.
1st Class Brick 31.0000 each 9.00 279.00
Sand (FM - 0.5) 0.0120 m3 420.00 5.04
Mason 0.0100 day 550.00 5.50
Ordinary Labour 0.0500 day 370.00 18.50
Subtotal-A: 308.04
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 314.20
Note : Rates of all items should be inclusive of all supply and carriage. Page: 125 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.08.4.2 SBFS(FM-0.80): Providing Single layer brick flat soling (BFS) with 1st sqm
class or picked bricks, true to level, maintaining camber/super elevation
and grade including carrying bricks, filling the interstices tightly with
sand of minimum FM 0.80, etc. all complete in all respect as per
approved drawing, specification and direction of the Engineer-in-charge.
1st Class Brick 31.0000 each 9.00 279.00
Sand (FM - 0.8) 0.0120 m3 480.00 5.76
Mason 0.0100 day 550.00 5.50
Ordinary Labour 0.0500 day 370.00 18.50
Subtotal-A: 308.76
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 314.94
Note : Rates of all items should be inclusive of all supply and carriage. Page: 126 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.08.4.3 SBFS(FM<0.50): Providing Single layer brick flat soling (BFS) with 1st sqm
class or picked bricks, true to level, maintaining camber/super elevation
and grade including carrying bricks, filling the interstices tightly with
locally available sand (passing <=15% through#200 sieve), etc. all
complete in all respect as per approved drawing, specification and
direction of the Engineer-in-charge.
1st Class Brick 31.0000 each 9.00 279.00
Local Sand (Sieve # 200 passing not more than 15%) 0.0120 m3 350.00 4.20
Mason 0.0100 day 550.00 5.50
Ordinary Labour 0.0500 day 370.00 18.50
Subtotal-A: 307.20
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 313.34
Note : Rates of all items should be inclusive of all supply and carriage. Page: 127 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 527.71
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 538.26
Note : Rates of all items should be inclusive of all supply and carriage. Page: 128 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 529.39
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 539.98
Note : Rates of all items should be inclusive of all supply and carriage. Page: 129 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 525.75
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 536.27
Subtotal-A: 24.79
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 25.29
Note : Rates of all items should be inclusive of all supply and carriage. Page: 130 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 74.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 75.48
3.09.2 PiCCB(cum): Labour charge for picking up the existing CC Block of any cum
sizes on soling or slope of embankment, including staking the materials
at a specified distance, etc. all complete as per direction of the E-I-C.
Ordinary Labour 0.6700 day 370.00 247.90
Subtotal-A: 247.90
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 252.86
Note : Rates of all items should be inclusive of all supply and carriage. Page: 131 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.09.3.1 ReCCB: Labour charge for Resetting the CC Block on End Edging m
(100mm across) with CC Block (375mmX100mmX225mm), including
cutting trenches true to level & grade, removing earth, re-filling &
ramming the sides properly, including supplying and filling the gaps with
local sand (FM - 0.5), etc. all complete in all respect as per approved
drawing, specification and direction of the Engineer-in-charge.
Mason 0.0083 day 550.00 4.57
Ordinary Labour 0.0833 day 370.00 30.82
Sand (FM - 0.5) 0.0010 m3 420.00 0.42
Subtotal-A: 35.81
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 36.52
Note : Rates of all items should be inclusive of all supply and carriage. Page: 132 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.09.3.2 ReCCB: Labour charge for Resetting the CC Block on End Edging m
(Average 125mm across) with CC Block
[L:1000mmXH:500mmXW:(100mm+150mm)], including cutting
trenches true to level & grade, removing earth, re-filling & ramming the
sides properly, including supplying and filling the gaps with local sand
(FM - 0.5), etc. all complete in all respect as per approved drawing,
specification and direction of the Engineer-in-charge.
Mason 0.0030 day 550.00 1.65
Ordinary Labour 0.3000 day 370.00 111.00
Sand (FM - 0.5) 0.0010 m3 420.00 0.42
Subtotal-A: 113.07
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 115.33
Note : Rates of all items should be inclusive of all supply and carriage. Page: 133 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 644.93
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 657.83
Note : Rates of all items should be inclusive of all supply and carriage. Page: 134 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 76.53
Form Work: ( +2.50 % on Subtotal-A ) 1.91
Subtotal-A1: 78.44
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 80.01
Note : Rates of all items should be inclusive of all supply and carriage. Page: 135 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 56.13
Form Work: ( +2.50 % on Subtotal-A ) 1.40
Subtotal-A1: 57.53
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 58.68
Note : Rates of all items should be inclusive of all supply and carriage. Page: 136 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 398.24
Form Work: ( +2.50 % on Subtotal-A ) 9.96
Subtotal-A1: 408.20
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 416.36
Note : Rates of all items should be inclusive of all supply and carriage. Page: 137 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.09.6.1 CCBSS-EE: Providing PCC Block on End Edging (100mm across) of size m
(375mmX100mmX225mm), including manufacturing and supplying Plain
Cement Concrete (PCC) Blocks with cement conforming to BDS EN 197-
1 : 2003 CEM-II/A-M 42.5N, using steel shutter, with 40mm down
graded Stone Shingles, sand (FM>=1.5) and minimum cement content
relates to mix ratio 1:3.6 satisfying specified minimum compressive
strength 10.0Mpa at 28 days, including cutting trenches true to level &
grade, removing earth, re-filling & ramming the sides properly, including
supplying and filling the gaps with local sand (FM - 0.5), etc. all
complete in all respect as per approved drawing, specification and
direction of the Engineer-in-charge.
Manufacturing and supplying CC blocks Size 2.6500 each 57.53 152.45
375mmx100mmx225mm…..(3.09.5.2)
Sand (FM - 0.5) 0.0010 m3 420.00 0.42
Mason 0.0100 day 550.00 5.50
Ordinary Labour 0.1000 day 370.00 37.00
Subtotal-A: 195.37
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 199.28
Note : Rates of all items should be inclusive of all supply and carriage. Page: 138 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 521.27
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 531.69
Note : Rates of all items should be inclusive of all supply and carriage. Page: 139 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Note : Rates of all items should be inclusive of all supply and carriage. Page: 140 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 103.74
Form Work: ( +2.50 % on Subtotal-A ) 2.59
Subtotal-A1: 106.33
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 108.46
Note : Rates of all items should be inclusive of all supply and carriage. Page: 141 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.09.8 CCBSC-RW: Providing single layer PCC Block on road top of size sqm
(375mmX225mmX150mm), including manufacturing and supplying Plain
Cement Concrete (PCC) Blocks with cement conforming to BDS EN 197-
1 : 2003 CEM-II/A-M 42.5N, using steel shutter, with 40mm down
graded Stone Chips, sand (FM>=1.8) and minimum cement content
relates to mix ratio 1:2.4 satisfying specified minimum compressive
strength 20.0Mpa at 28 days, including preparation of bed by cutting or
filling with ramming the filled up earth to the same profile as that of the
finished pavement, including carrying and placing PCC blocks, filling the
interstices tightly with sand (FM - 0.5), etc. all complete in all respect as
per approved drawing, specification and direction of the Engineer-in-
charge.
Sand (FM - 0.5) 0.0332 m3 420.00 13.94
Manufacturing and supplying CC Block for road pavement 11.0000 each 106.33 1169.67
works using steel shutter ….. (Size 375mmX225mmX150mm)
….. (3.09.7.1)
Skilled Labour 0.0200 day 450.00 9.00
Ordinary Labour 0.2500 day 370.00 92.50
Subtotal-A: 1285.11
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 1310.81
Note : Rates of all items should be inclusive of all supply and carriage. Page: 142 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.09.9 LC-CCB: Labour charge for laying single layer CC Block of different sizes cum
for protective wall, including preparation trenches, true to level,
maintaining alignment, watering and ramming the base, including
carrying and placing CC blocks, filling minimum 65% interstices of CC
Block work tightly with cement mortar (1:6), raking out joints, cleaning
and soaking Block at least for 24 hours before use, washing of sand,
curing for requisite period, etc. all complete in all respect as per
approved drawing, specification and direction of the Engineer-in-charge.
[Excluding the cost of CC Blocks].
Sand (FM - 1.2) 0.0752 m3 584.00 43.92
Portland Composite Cement (CEM-II/A-L/M/V/W 42.5N) 0.3538 bag 430.00 152.13
Head Mason 0.0200 day 650.00 13.00
Mason 0.2500 day 550.00 137.50
Skilled Labour 0.8000 day 450.00 360.00
Ordinary Labour 1.5000 day 370.00 555.00
Subtotal-A: 1261.55
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 1286.78
Note : Rates of all items should be inclusive of all supply and carriage. Page: 143 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.10.01.1 PPLM: Preparation of Pothole for small patch works (pothole, edge sqm
breaking, etc.) by cutting, scarifying and loosening of existing damaged
Base/sub- base Course materials up to the depth of 150mm at the
pothole areas in order to make regular shape of the pothole including
leveling, dressing and compacting manually where mechanical
compactors are not suitable to give a smooth surface including
brushing, removing & stacking all debris at a safe distance etc. all
complete in all respect as per direction of the Engineer-in-charge.
Ordinary Labour 0.0300 day 370.00 11.10
Skilled Labour 0.0050 day 450.00 2.25
Subtotal-A: 13.35
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 13.62
Note : Rates of all items should be inclusive of all supply and carriage. Page: 144 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.10.01.2 HBPMM: Preparation of hard bed by scarifying and loosening of existing sqm
top (bituminous) surface, including base/sub-base course materials up
to the depth of 75mm (minimum) using mechanical means, breaking
dismantled material into specified sizes (less than 40mm), with
supplying of extra fresh base course materials of required specification
(if required) including spreading, leveling, dressing of loose material
uniformly for maintaining camber & grade, watering if needed, rolling
with 8 to 10 MT road roller to give compaction to 100% of MDD as
obtained by standard proctor test etc. all complete in all respect as per
direction of the Engineer-in-charge. (Rate is excluding the cost of
additional material supplied)
Skilled Labour 0.0055 day 450.00 2.48
Ordinary Labour 0.0280 day 370.00 10.36
H.C. of Excavator (Medium Size) 0.0006 day 8880.00 5.33
H.C. of 3 Wheel Static Road roller (8-10 ton) 0.0006 day 3500.00 2.10
Diesel 0.0150 liter 68.00 1.02
Lubricant 0.0010 liter 220.00 0.22
Subtotal-A: 21.50
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 21.93
Note : Rates of all items should be inclusive of all supply and carriage. Page: 145 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.10.02 SB: Providing and applying sand blinding with sand of minimum FM 0.80 sqm
@0.005 cum per sqm on prepared road surface, including supplying of
all material, their carriage, labours, tools and equipment, etc. all
complete in all respect as per direction of the Engineer-in-charge.
Sand (FM - 0.8) 0.0050 m3 480.00 2.40
Ordinary Labour 0.0030 day 370.00 1.11
Subtotal-A: 3.51
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 3.58
Note : Rates of all items should be inclusive of all supply and carriage. Page: 146 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.10.03 25mmSGSS: Providing 25mm thick (average) grouting with 20mm down sqm
graded broken stone shingles metal (LAA value not exceeding 35) and
using 60/70 or 80/100 penetration grade straight run bitumen
conforming to the requirements of ASTM/ AASHTO, spraying tack coat
@ 0.50kg per sqm over the cleaned road surface and laying, spreading
stone metal @0.028cum per sqm (loose) on the road surface,
maintaining proper camber, level, grade, super elevation and spraying
hot bitumen @1.50kg per sqm uniformly, including rolling hard to full
compaction with 8 to 10 MT road roller including cleaning the surface &
heating bitumen from 140°C to 160°C temperature and spreading
crushed stone chips/Sand (FM-1.80) @0.006cum per sqm road surface
etc. all complete in all respect as per direction of the Engineer-in-charge.
Stone Shingles (20mm down graded) 0.0280 m3 3500.00 98.00
Sand (FM - 1.8) 0.0060 m3 970.00 5.82
Bitumen [Grade 80/100] 2.0000 kg 49.00 98.00
Fire wood 1.5000 kg 7.75 11.63
Mason 0.0020 day 550.00 1.10
Skilled Labour 0.0250 day 450.00 11.25
Ordinary Labour 0.0400 day 370.00 14.80
H.C. of Vibratory Road Roller (8-10 ton) 0.0030 day 3000.00 9.00
Diesel 0.0200 liter 68.00 1.36
Lubricant 0.0020 liter 220.00 0.44
Subtotal-A: 251.40
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 256.42
Note : Rates of all items should be inclusive of all supply and carriage. Page: 147 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.10.04.1 50mmSGBC: Providing 50mm thick (average) grouting with picked brick sqm
chips (LAA value not exceeding 40) and using 60/70 or 80/100
penetration grade straight run bitumen conforming to the requirements
of ASTM/ AASHTO, laying and spreading picked brick chips 60mm thick
(loose) in two layers, 1st layer of 35mm thick (loose) with 25mm to
16mm size and 2nd layer of 25mm thick (loose) mixing with 80% of
16mm to 12mm size and 20% of 12mm to 8mm size picked brick chips,
spraying tack coat @ 0.50kg per sqm over the cleaned road surface,
maintaining proper camber, level, grade, super elevation and spraying
hot bitumen @1.25kg per sqm uniformly on the 1st layer and @1.50kg
per sqm on 2nd layer, including rolling hard to full compaction with 8 to
10 MT road roller including cleaning the surface & heating bitumen from
140°C to 160°C temperature and spreading crushed stone chips/Sand
(FM-1.80) @0.006 cum per sqm on road surface etc. all complete in all
respect as per direction of the Engineer-in-charge.
1st Class/ Picked Brick chips (40mm down graded) 0.0600 m3 2786.00 167.16
Sand (FM - 1.8) 0.0060 m3 970.00 5.82
Bitumen [Grade 80/100] 3.2500 kg 49.00 159.25
Fire wood 2.6000 kg 7.75 20.15
Mason 0.0020 day 550.00 1.10
Skilled Labour 0.0300 day 450.00 13.50
Ordinary Labour 0.0600 day 370.00 22.20
H.C. of Vibratory Road Roller (8-10 ton) 0.0030 day 3000.00 9.00
Diesel 0.0280 liter 68.00 1.90
Lubricant 0.0028 liter 220.00 0.62
Subtotal-A: 400.70
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 408.71
Note : Rates of all items should be inclusive of all supply and carriage. Page: 148 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.10.04.2 50mmSGSS: Providing 50mm thick (average) grouting with broken sqm
stone shingles (LAA value not exceeding 35) and using 60/70 or 80/100
penetration grade straight run bitumen conforming to the requirements
of ASTM/ AASHTO, laying and spreading stone shingles 60mm thick
(loose) in two layers, 1st layer of 35mm thick (loose) with 25mm to
16mm size and 2nd layer of 25mm thick (loose) mixing with 80% of
16mm to 12mm size and 20% of 12mm to 8mm size stone shingles,
spraying tack coat @ 0.50kg per sqm over the cleaned road surface,
maintaining proper camber, level, grade, super elevation and spraying
hot bitumen @1.25kg per sqm uniformly on the 1st layer and @1.50kg
per sqm on 2nd layer, including rolling hard to full compaction with 8 to
10 MT road roller including cleaning the surface & heating bitumen from
140°C to 160°C temperature and spreading crushed stone chips/Sand
(FM-1.80) @0.006 cum per sqm on road surface etc. all complete in all
respect as per direction of the Engineer-in-charge.
Stone Shingles (20mm down graded) 0.0600 m3 3500.00 210.00
Bitumen [Grade 80/100] 3.2500 kg 49.00 159.25
Fire wood 2.6000 kg 7.75 20.15
Mason 0.0020 day 550.00 1.10
Skilled Labour 0.0300 day 450.00 13.50
Ordinary Labour 0.0600 day 370.00 22.20
H.C. of Vibratory Road Roller (8-10 ton) 0.0030 day 3000.00 9.00
Diesel 0.0280 liter 68.00 1.90
Lubricant 0.0028 liter 220.00 0.62
Sand (FM - 1.8) 0.0060 m3 970.00 5.82
Subtotal-A: 443.54
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 452.41
Note : Rates of all items should be inclusive of all supply and carriage. Page: 149 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.10.04.3 50mmSGSC: Providing 50mm thick (average) grouting with broken sqm
stone metal (LAA value not exceeding 35) and using 60/70 or 80/100
penetration grade straight run bitumen conforming to the requirements
of ASTM/ AASHTO, laying and spreading stone metal 60mm thick
(loose) in two layers, 1st layer of 35mm thick (loose) with 25mm to
16mm size and 2nd layer of 25mm thick (loose) mixing with 80% of
16mm to 12mm size and 20% of 12mm to 8mm size stone metal,
spraying tack coat @ 0.50kg per sqm over the cleaned road surface,
maintaining proper camber, level, grade, super elevation and spraying
hot bitumen @1.25kg per sqm uniformly on the 1st layer and @1.50kg
per sqm on 2nd layer, including rolling hard to full compaction with 8 to
10 MT road roller including cleaning the surface & heating bitumen from
140°C to 160°C temperature and spreading crushed stone chips/Sand
(FM-1.80) @0.006 cum per sqm on road surface etc. all complete in all
respect as per direction of the Engineer-in-charge.
Stone Boulder 0.0600 m3 3700.00 222.00
Bitumen [Grade 80/100] 3.2500 kg 49.00 159.25
Fire wood 2.6000 kg 7.75 20.15
Mason 0.0020 day 550.00 1.10
Skilled Labour 0.0300 day 450.00 13.50
Ordinary Labour 0.1000 day 370.00 37.00
H.C. of Vibratory Road Roller (8-10 ton) 0.0030 day 3000.00 9.00
Diesel 0.0280 liter 68.00 1.90
Lubricant 0.0028 liter 220.00 0.62
Sand (FM - 1.8) 0.0060 m3 970.00 5.82
Subtotal-A: 470.34
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 479.75
Note : Rates of all items should be inclusive of all supply and carriage. Page: 150 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.10.05.1 75mmSGBC: Providing 75mm thick (average) grouting with picked brick sqm
chips (LAA value not exceeding 40) and using 60/70 or 80/100
penetration grade straight run bitumen conforming to the requirements
of ASTM/ AASHTO, laying and spreading picked brick chips 100mm thick
(loose) in two layers, 1st layer of 60mm thick (loose) with 40mm to
25mm size and 2nd layer of 40mm thick (loose) mixing with 80% of
25mm to 20mm size and 20% of 20mm to 10mm size picked brick
chips, maintaining proper camber, level, grade, super elevation and
spraying hot bitumen @2.00kg per sqm uniformly on the 1st layer and
@2.20kg per sqm on 2nd layer, including rolling hard to full compaction
with 8 to 10 MT road roller including cleaning the surface & heating
bitumen from 140°C to 160°C temperature and spreading crushed
stone chips/Sand (FM-1.80) @0.006 cum per sqm on road surface etc.
all complete in all respect as per direction of the Engineer-in-charge.
25mm down graded Brick Chips 0.0400 cum 2895.00 115.80
Sand (FM - 1.8) 0.0060 m3 970.00 5.82
Bitumen [Grade 80/100] 4.2000 kg 49.00 205.80
Fire wood 3.3600 kg 7.75 26.04
Mason 0.0020 day 550.00 1.10
Skilled Labour 0.0400 day 450.00 18.00
Ordinary Labour 0.1000 day 370.00 37.00
H.C. of Vibratory Road Roller (8-10 ton) 0.0030 day 3000.00 9.00
Diesel 0.0280 liter 68.00 1.90
Lubricant 0.0028 liter 220.00 0.62
1st Class/ Picked Brick chips (40mm down graded) 0.0600 m3 2786.00 167.16
Subtotal-A: 588.24
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 600.00
Note : Rates of all items should be inclusive of all supply and carriage. Page: 151 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.10.05.2 75mmSGSS: Providing 75mm thick (average) grouting with broken sqm
stone shingles (LAA value not exceeding 35) and using 60/70 or 80/100
penetration grade straight run bitumen conforming to the requirements
of ASTM/ AASHTO, laying and spreading stone shingles 94mm thick
(loose) in two layers, 1st layer of 56mm thick (loose) with 40mm to
25mm size and 2nd layer of 38mm thick (loose) mixing with 80% of
25mm to 20mm size and 20% of 20mm to 10mm size stone shingles,
maintaining proper camber, level, grade, super elevation and spraying
hot bitumen @1.50kg per sqm uniformly on the 1st layer and @2.00kg
per sqm on 2nd layer, including rolling hard to full compaction with 8 to
10 MT road roller including cleaning the surface & heating bitumen from
140°C to 160°C temperature and spreading crushed stone chips/Sand
(FM-1.80) @0.006 cum per sqm on road surface etc. all complete in all
respect as per direction of the Engineer-in-charge.
Stone Shingles (20mm down graded) 0.0940 m3 3500.00 329.00
Bitumen [Grade 80/100] 3.5000 kg 49.00 171.50
Fire wood 2.8000 kg 7.75 21.70
Mason 0.0020 day 550.00 1.10
Skilled Labour 0.0600 day 450.00 27.00
Ordinary Labour 0.0800 day 370.00 29.60
H.C. of Vibratory Road Roller (8-10 ton) 0.0030 day 3000.00 9.00
Diesel 0.0300 liter 68.00 2.04
Lubricant 0.0030 liter 220.00 0.66
Sand (FM - 1.8) 0.0060 m3 970.00 5.82
Subtotal-A: 597.42
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 609.37
Note : Rates of all items should be inclusive of all supply and carriage. Page: 152 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.10.05.3 75mmSGSC: Providing 75mm thick (average) grouting with Stone metal sqm
(LAA value not exceeding 35) and using 60/70 or 80/100 penetration
grade straight run bitumen conforming to the requirements of ASTM/
AASHTO, laying and spreading Stone metal 94mm thick (loose) in two
layers, 1st layer of 56mm thick (loose) with 40mm to 25mm size and
2nd layer of 38mm thick (loose) mixing with 80% of 25mm to 20mm
size and 20% of 20mm to 10mm size stone shingles, maintaining proper
camber, level, grade, super elevation and spraying hot bitumen
@1.50kg per sqm uniformly on the 1st layer and @2.00kg per sqm on
2nd layer, including rolling hard to full compaction with 8 to 10 MT road
roller including cleaning the surface & heating bitumen from 140°C to
160°C temperature and spreading crushed stone chips/Sand (FM-1.80)
@0.006 cum per sqm on road surface etc. all complete in all respect as
per direction of the Engineer-in-charge.
Stone Boulder 0.0940 m3 3700.00 347.80
Sand (FM - 1.8) 0.0060 m3 970.00 5.82
Bitumen [Grade 80/100] 3.5000 kg 49.00 171.50
Fire wood 2.8000 kg 7.75 21.70
Mason 0.0020 day 550.00 1.10
Skilled Labour 0.0600 day 450.00 27.00
Ordinary Labour 0.1000 day 370.00 37.00
H.C. of Vibratory Road Roller (8-10 ton) 0.0030 day 3000.00 9.00
Diesel 0.0300 liter 68.00 2.04
Lubricant 0.0030 liter 220.00 0.66
Subtotal-A: 623.62
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 636.09
Note : Rates of all items should be inclusive of all supply and carriage. Page: 153 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.10.06 100mmSGBC: Providing 100mm thick (average) grouting with picked sqm
brick chips (LAA value not exceeding 40) and using 60/70 or 80/100
penetration grade straight run bitumen conforming to the requirements
of ASTM/ AASHTO, laying and spreading picked brick chips 130mm thick
(loose) in two layers, 1st layer of 80mm thick (loose) with 40mm to
25mm size and 2nd layer of 50mm thick (loose) mixing with 80% of
25mm to 20mm size and 20% of 20mm to 10mm size picked brick
chips, maintaining proper camber, level, grade, super elevation and
spraying hot bitumen @2.00kg per sqm uniformly on the 1st layer and
@3.00kg per sqm on 2nd layer, including rolling hard to full compaction
with 8 to 10 MT road roller including cleaning the surface & heating
bitumen from 140°C to 160°C temperature and spreading crushed
stone chips/Sand (FM-1.80) @0.006 cum per sqm on road surface etc.
all complete in all respect as per direction of the Engineer-in-charge.
1st Class/ Picked Brick chips (40mm down graded) 0.0800 m3 2786.00 222.88
Sand (FM - 1.2) 0.0060 m3 584.00 3.50
Bitumen [Grade 80/100] 5.0000 kg 49.00 245.00
Fire wood 4.0000 kg 7.75 31.00
Mason 0.0020 day 550.00 1.10
Skilled Labour 0.0400 day 450.00 18.00
Ordinary Labour 0.1000 day 370.00 37.00
H.C. of Vibratory Road Roller (8-10 ton) 0.0030 day 3000.00 9.00
Diesel 0.0280 liter 68.00 1.90
Lubricant 0.0028 liter 220.00 0.62
25mm down graded Brick Chips 0.0500 cum 2895.00 144.75
Subtotal-A: 714.75
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 729.05
Note : Rates of all items should be inclusive of all supply and carriage. Page: 154 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.10.07.1 50mmSGSS(BE): Providing 50mm thick (average) grouting with broken sqm
stone shingles (LAA value not exceeding 35) and using bitumen
emulsion of grade k-1-60 conforming to the requirements of
ASTM/AASHTO, laying and spreading stone shingles 60mm thick (loose)
in two layers, 1st layer of 35mm thick (loose) with 25mm to 16mm size
and 2nd layer of 25mm thick (loose) mixing with 80% of 16mm to
12mm size and 20% of 12mm to 8mm size stone shingles, spraying
tack coat @ 0.750kg per sqm over the cleaned road surface,
maintaining proper camber, level, grade, super elevation and spraying
bitumen emulsion @1.75kg per sqm uniformly on the 1st layer and
@2.00kg per sqm on 2nd layer, including rolling hard to full compaction
with 8 to 10 MT road roller and cleaning the surface, spreading crushed
stone chips/Sand (FM-1.80) @0.006 cum per sqm on road surface etc.
all complete in all respect as per direction of the Engineer-in-charge.
Stone Shingles (20mm down graded) 0.0600 m3 3500.00 210.00
Bitumen Emulsion 4.5000 kg 61.00 274.50
Mason 0.0020 day 550.00 1.10
Skilled Labour 0.0300 day 450.00 13.50
Ordinary Labour 0.0500 day 370.00 18.50
H.C. of Vibratory Road Roller (8-10 ton) 0.0030 day 3000.00 9.00
Diesel 0.0280 liter 68.00 1.90
Lubricant 0.0028 liter 220.00 0.62
Sand (FM - 1.5) 0.0060 m3 795.00 4.77
Subtotal-A: 533.89
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 544.57
Note : Rates of all items should be inclusive of all supply and carriage. Page: 155 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.10.07.2 75mmSGSS(BE): Providing 75mm thick (average) grouting with broken sqm
stone shingles (LAA value not exceeding 35) and using bitumen
emulsion of grade k-1-60 conforming to the requirements of
ASTM/AASHTO, laying and spreading stone shingles 94mm thick (loose)
in two layers, 1st layer of 56mm thick (loose) with 40mm to 25mm size
and 2nd layer of 38mm thick (loose) mixing with 80% of 25mm to
20mm size and 20% of 20mm to 10mm size stone shingles, maintaining
proper camber, level, grade, super elevation and spraying bitumen
emulsion @2.25kg per sqm uniformly on the 1st layer and @3.00kg per
sqm on 2nd layer, including rolling hard to full compaction with 8 to 10
MT road roller and cleaning the surface, spreading crushed stone
chips/Sand (FM-1.80) @0.006 cum per sqm on road surface etc. all
complete in all respect as per direction of the Engineer-in-charge.
Stone Shingles (20mm down graded) 0.0940 m3 3500.00 329.00
Bitumen Emulsion 5.2500 kg 61.00 320.25
Mason 0.0020 day 550.00 1.10
Skilled Labour 0.0300 day 450.00 13.50
Ordinary Labour 0.0500 day 370.00 18.50
H.C. of Vibratory Road Roller (8-10 ton) 0.0030 day 3000.00 9.00
Diesel 0.0300 liter 68.00 2.04
Lubricant 0.0030 liter 220.00 0.66
Sand (FM - 1.5) 0.0060 m3 795.00 4.77
Subtotal-A: 698.82
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 712.80
Note : Rates of all items should be inclusive of all supply and carriage. Page: 156 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.10.08.1 CS@0.75MD: Providing a single coat chip sealing over a low cracked sqm
road surface, using 60/70 or 80/100 penetration grade straight run
bitumen conforming to the requirements of ASTM/ AASHTO, spraying
bitumen by mechanical distributor on road surface @ 0.75kg/sqm, after
spraying bitumen instantly spreading uniform graded crushed stone
aggregates of 6.5mm average size defined as 100% passing through
10mm sieve and retain on 4.75mm sieve LAA value not exceeding 35 @
0.006cum/sqm over the surface, sweeping the surface and hand
packing for identical spreading of aggregate, surface rolling to embed
the aggregate with Pneumatic Multiple Tired Roller (7 tires, 6-8 tons),
including properly surface cleaning, heating bitumen upto 140°C to
180°C, etc. including cost of all materials, their carriages, hire charges
of machineries, equipment for construction and quality control as per
specification, fuels, lubricants and wages of operational staff etc. all
complete in all respect as per direction of the Engineer-in-charge.
Stone Chips (6mm down graded) [LAA≤35] 0.0060 cum 3690.00 22.14
Bitumen [Grade 80/100] 0.7500 kg 49.00 36.75
Fire wood 0.5625 kg 7.75 4.36
Skilled Labour 0.0011 day 450.00 0.50
Ordinary Labour 0.0100 day 370.00 3.70
H.C. of Pneumatic Multiple Tired Roller (7 tires, 6-8 tons) 0.0003 day 3000.00 0.90
H.C. of Distributor 0.0003 day 3750.00 1.13
Diesel 0.0120 liter 68.00 0.82
Lubricant 0.0010 liter 220.00 0.22
Foreman 0.0003 day 800.00 0.24
Subtotal-A: 70.75
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 72.16
Note : Rates of all items should be inclusive of all supply and carriage. Page: 157 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.10.08.2 CS@1.00MD: Providing single coat chip sealing over a moderate cracked sqm
road surface, using 60/70 or 80/100 penetration grade straight run
bitumen conforming to the requirements of ASTM/ AASHTO, spraying
bitumen by mechanical distributor on road surface @ 1.00kg/sqm, after
spraying bitumen instantly spreading uniform graded crushed stone
aggregates of 6.5mm average size defined as 100% passing through
10mm sieve and retain on 4.75mm sieve with LAA value not exceeding
35 @ 0.007cum/sqm over the surface, sweeping the surface and hand
packing for identical spreading of aggregate, surface rolling to embed
the aggregate with Pneumatic Multiple Tired Roller (7 tires, 6-8 tons),
including properly surface cleaning, heating bitumen upto 140°C to
180°C, etc. including cost of all materials, their carriages, hire charges
of machineries, equipment for construction and quality control as per
specification, fuels, lubricants and wages of operational staff etc. all
complete in all respect as per direction of the Engineer-in-charge.
Stone Chips (6mm down graded) [LAA≤35] 0.0070 cum 3690.00 25.83
Bitumen [Grade 80/100] 1.0000 kg 49.00 49.00
Fire wood 0.7500 kg 7.75 5.81
Skilled Labour 0.0010 day 450.00 0.45
Ordinary Labour 0.0100 day 370.00 3.70
H.C. of Pneumatic Multiple Tired Roller (7 tires, 6-8 tons) 0.0003 day 3000.00 0.90
H.C. of Distributor 0.0003 day 3750.00 1.13
Diesel 0.0120 liter 68.00 0.82
Lubricant 0.0010 liter 220.00 0.22
Foreman 0.0003 day 800.00 0.24
Subtotal-A: 88.09
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 89.86
Note : Rates of all items should be inclusive of all supply and carriage. Page: 158 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.10.08.3 CS@1.20MD(BE): Providing a single coat chip sealing over a moderate sqm
cracked road surface, using bitumen emulsion of grade k-1-60
conforming to the requirements of ASTM/ AASHTO, spraying bitumen
emulsion by mechanical distributor on cleaned road surface @
1.20kg/sqm, after spraying bitumen emulsion instantly spreading
uniform graded crushed stone aggregates of 6.5mm average size
defined as 100% passing through 10mm sieve and retain on 4.75mm
sieve with LAA value not exceeding 35 @ 0.007cum/sqm over the
surface, sweeping the surface and hand packing for identical spreading
of aggregate, surface rolling to embed the aggregate with Pneumatic
Multiple Tired Roller (7 tires, 6-8 tons), including cost of all materials,
their carriages, hire charges of machineries, equipment for construction
and quality control as per specification, fuels, lubricants and wages of
operational staff etc. all complete in all respect as per direction of the
Engineer-in-charge.
Stone Chips (6mm down graded) [LAA≤35] 0.0070 cum 3690.00 25.83
Bitumen Emulsion 1.2000 kg 61.00 73.20
Foreman 0.0003 day 800.00 0.24
Skilled Labour 0.0011 day 450.00 0.50
Ordinary Labour 0.0100 day 370.00 3.70
H.C. of Pneumatic Multiple Tired Roller (7 tires, 6-8 tons) 0.0003 day 3000.00 0.90
Diesel 0.0120 liter 68.00 0.82
Lubricant 0.0010 liter 220.00 0.22
H.C. of Distributor 0.0003 day 3750.00 1.13
Subtotal-A: 106.53
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 108.66
Note : Rates of all items should be inclusive of all supply and carriage. Page: 159 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 153.35
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 156.42
Note : Rates of all items should be inclusive of all supply and carriage. Page: 160 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.10.10.1 CP-BB: Supplying, cutting and fitting of 6mm thick Chequer Plate for kg
bailey bridge decking with minimum 6mm thick mild steel chequer plate
of unit weight 49.20kg/sqm, including cutting and shaping of required
sizes of bridge deck with cleaning, removing rust, etc. including local
handling, carriage of the plate to the site with loading & unloading and
placing, etc. all complete in all respect as per direction of the Engineer-
in-charge. Rate is inclusive of cost of all materials, labour and all
incidental charges in this connection.
Chequer Plate (thickness 6mm) 1.0100 sqm 110.00 111.10
Bailey Bridge Mistry 0.0010 day 680.00 0.68
Skilled Labour 0.0020 day 450.00 0.90
Ordinary Labour 0.0020 day 370.00 0.74
Subtotal-A: 113.42
Carrying cost to Working Site, etc. ( +1.00 % on Subtotal-A ) 1.13
Subtotal-A1: 114.55
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 116.85
Note : Rates of all items should be inclusive of all supply and carriage. Page: 161 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.10.10.2 Welding at the splicing point of mild steel chequer plate with joist of each
deck at 3 points (each point being 25mm in length) using electrodes,
including cleaning, local handling, cost of all materials, labours, tools,
equipment, cost of power, etc. all complete as per drawings,
specifications and directions of the Engineer.
Electrode 0.0200 pkt 810.00 16.20
Welder 0.0025 day 680.00 1.70
Welder Helper 0.0025 day 470.00 1.18
H.C. of Tripod and Mechanical Winch Machine complete with 0.0025 day 3000.00 7.50
power unit and accessories
Subtotal-A: 26.58
Portable staging, etc. ( +75.00 % on Subtotal-A ) 19.93
Subtotal-A1: 46.51
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 47.44
Note : Rates of all items should be inclusive of all supply and carriage. Page: 162 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.10.11.01 CCRM-30SCCM: Providing and laying 12BWG G.I. wire meshed cement cum
concrete layer over an old RCC/CC pavement with minimum cement
content and maximum water cement ratio as specified by the laboratory
through mix design having minimum required average compressive
strength, f'cr = 38.5 MPa and satisfying a specified compressive
strength, f'c = 30 MPa at 28 days on standard cylinder as per standard
practice of Code AASHTO/ ASTM and cement conforming to BDS EN
197-1 : 2003 CEM-I 52.5N/ASTM C150 Type-1, sand of minimum FM
2.50 and 20mm down well graded crushed stone chips broken from
boulders (Preferably stone chips from Madhyapara, Dinajpur, LAA value
not exceeding 30) conforming to ASTM C-33 including breaking chips,
screening through proper sieves, cleaning, placing shutter in position
and maintaining true to the alignment, making shutter water-tight
properly, mixing in standard concrete mixture machine, maintaining
allowable slump of 50mm to 75mm, including spraying cement
grouting/slurry over the cleaned existing road surface, casting in forms,
placing 50mm rhombus 12 BWG G.I. wire mesh in position, compacting
by mechanical vibrator machine and finished in a continuous operation
including provision of contraction, curing for 28 days, finishing to lines
and grades, removing centering-shuttering after specified time
approved, etc. all complete as per drawing, specification & direction of
the E-I-C. The cost of 12 BWG G.I. wire mesh is not included in this unit
rate. Additional quantity of cement to be added if required to attain the
required strength at the contractors own cost. The Mix Design has to be
approved by the Central Quality Control Laboratory (CQCL), LGED or
any other reputed laboratory approved by the competent authority
before execution of the work. (Unit cost including all materials, cleaning
the existing surface shuttering, casting, curing for 28 days, and all other
incidental charges, etc.)
Ordinary Portland Cement (CEM I, 52.5N) 8.9000 bag 455.00 4049.50
Stone Chips (20mm down graded) [LAA≤30] 0.4547 m3 5320.00 2419.00
Stone Chips (12mm down graded) [LAA≤30] 0.3032 m3 4470.00 1355.30
Sand (FM - 2.5) 0.4260 m3 1500.00 639.00
Head Mason 0.0800 day 650.00 52.00
Mason 0.4200 day 550.00 231.00
Skilled Labour 0.7500 day 450.00 337.50
Note : Rates of all items should be inclusive of all supply and carriage. Page: 163 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 9919.31
Cost of Form Works/Shuttering, necessary ( +.50 % on Subtotal-A ) 49.60
supports, etc.
Subtotal-A1: 9968.90
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 10168.28
3.10.12.01 12 BWG (WM): Supplying and laying 50mm rhombus 12 BWG G.I. wire sqm
mesh of required size in cement concreting work, placing mesh in the
middle of concreting work or as mentioned in the drawing, including
cutting and carrying of wire mesh to the site, etc. all complete in all
respect as per approved drawing, specification and direction of the
Engineer-in-charge. (Rate is inclusive of cost of materials, labour and all
incidental charges in this connection).
GI Wire Net (12 BWG) [Rhombus Size 50mm] 1.0000 sqm 130.00 130.00
Ordinary Labour 0.0050 day 370.00 1.85
Subtotal-A: 131.85
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 134.49
Note : Rates of all items should be inclusive of all supply and carriage. Page: 164 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.11.01 PCCBC-10: Plain cement concrete work in foundation with minimum cum
compressive strength of 10 Mpa at 28 days (sugessted mix proportion
1:3:6) on standard cylinder as per standard practice of Code AASTHTO/
ASTM and cement conforming to BDS EN 197-1 : 2003 CEM-II /A-M,
42.5 N, best quality sand (FM. 1.2) and 20mm down well graded picked
brick chips (LAA value and maximum water absorption not exceeding 38
& 15% respectively) conforming ASTM C-33, including breaking chips
and screening, placing shutter in position and maintaining true to the
alignment, making shutter water-tight properly, mixing in standard
mixture machine, casting in forms, compacting by vibrator machine and
curing for 28 days, removing shuttering after specified time approved,
etc. all complete approved and accepted by the E-I-C. (Additional
quantity of cement to be added if required to attain the strength at the
contractors own cost).
1st Class Brick Chips (20mm down graded) 0.9000 m3 2940.00 2646.00
Sand (FM - 1.2) 0.4500 m3 584.00 262.80
Head Mason 0.1000 day 650.00 65.00
Skilled Labour 0.4000 day 450.00 180.00
Ordinary Labour 1.2000 day 370.00 444.00
H.C. of Concrete Mixture Machine (Capacity 0.40/ 0.28 cum) 0.0600 day 1200.00 72.00
Hire and running charges of Concrete Vibrator 0.0600 day 400.00 24.00
Portland Composite Cement (CEM-II/A-L/M/V/W 42.5N) 4.2340 bag 430.00 1820.62
Mason 0.3000 day 550.00 165.00
Subtotal-A: 5679.42
Form Work: ( +.50 % on Subtotal-A ) 28.40
Subtotal-A1: 5707.82
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 5821.97
Note : Rates of all items should be inclusive of all supply and carriage. Page: 165 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.11.02.1 125mmBW(1:3): 125mm thick brick work with 1st class brick in sqm
specified cement mortar (1:3) in foundation with sand of minimum FM
1.20 and cement conforming to BDS EN 197-1 : 2003 CEM-II/A-M
42.5N, making bond with connected walls, including necessary
scaffolding, raking out joints, cleaning and soaking the bricks at least for
24 hours before use, washing of sand, curing for requisite period, etc.
all complete in all respect as per approved drawing, specification and
direction of the Engineer-in-charge.
1st Class Brick 52.0000 each 9.00 468.00
Sand (FM - 1.2) 0.0258 m3 584.00 15.07
Portland Composite Cement (CEM-II/A-L/M/V/W 42.5N) 0.2500 bag 430.00 107.50
Head Mason 0.0100 day 650.00 6.50
Mason 0.0500 day 550.00 27.50
Ordinary Labour 0.3500 day 370.00 129.50
Skilled Labour 0.1000 day 450.00 45.00
Subtotal-A: 799.07
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 815.05
Note : Rates of all items should be inclusive of all supply and carriage. Page: 166 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.11.02.2 BW(1:3): Brick works with 1st class bricks in cement mortar (1:3) in cum
foundation and wall with sand of minimum FM 1.20 and cement
conforming to BDS EN 197-1 : 2003 CEM-II/A-M 42.5N, including filling
the interstices tightly with mortar, raking out joints, cleaning and
soaking bricks at least for 24 hours before use, washing of sand, curing
for requisite period, etc. all complete in all respect as per approved
drawing, specification and direction of the Engineer-in-charge.
1st Class Brick 404.0000 each 9.00 3636.00
Sand (FM - 1.2) 0.2894 m3 584.00 169.01
Portland Composite Cement (CEM-II/A-L/M/V/W 42.5N) 2.7230 bag 430.00 1170.89
Head Mason 0.0600 day 650.00 39.00
Mason 0.4000 day 550.00 220.00
Skilled Labour 0.7000 day 450.00 315.00
Ordinary Labour 1.0000 day 370.00 370.00
Subtotal-A: 5919.90
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 6038.30
Note : Rates of all items should be inclusive of all supply and carriage. Page: 167 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.11.03 FP(1:2): Flush pointing to brick wall with sand of minimum FM 1.20 and sqm
cement conforming to BDS EN 197-1 : 2003 CEM-II/A-M 42.5N morter
(1:2), including raking out the joints, and necessary scaffolding, curing
for the requisite period etc. all complete in all respect as per direction of
the Engineer-in-charge.
Sand (FM - 1.2) 0.0030 m3 584.00 1.75
Portland Composite Cement (CEM-II/A-L/M/V/W 42.5N) 0.0430 bag 430.00 18.49
Head Mason 0.0270 day 650.00 17.55
Mason 0.0540 day 550.00 29.70
Ordinary Labour 0.1080 day 370.00 39.96
Subtotal-A: 107.45
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 109.60
Note : Rates of all items should be inclusive of all supply and carriage. Page: 168 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Note : Rates of all items should be inclusive of all supply and carriage. Page: 169 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 7188.15
Form Work: ( +15.00 % on Subtotal-A ) 1078.22
Subtotal-A1: 8266.37
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 8431.70
Note : Rates of all items should be inclusive of all supply and carriage. Page: 170 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 7262.15
Form Work: ( +25.00 % on Subtotal-A ) 1815.54
Subtotal-A1: 9077.69
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 9259.24
Note : Rates of all items should be inclusive of all supply and carriage. Page: 171 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Note : Rates of all items should be inclusive of all supply and carriage. Page: 172 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.11.05.1 RB 300: Ribbed or Deformed bar produced and marked as per BDS ISO kg
6935-2:2006 with minimum yield strength, fy (ReH) = 300 MPa, but the
actual yield strength based on mill tests does not exceed fy by more
than the 125 MPa and the ratio of actual ultimate strength, fu (Re) to
actual tensile yield strength (fy) shall be at least 1.25 and minimum
elongation after fracture (A5.65) & minimum total elongation at
maximum force (Agt) is 16% and 2.5% respectively.
GI Wire (22 BWG) 0.0100 kg 90.00 0.90
Re-bar Fabricator 0.0030 day 570.00 1.71
Skilled Labour 0.0025 day 450.00 1.13
Ordinary Labour 0.0075 day 370.00 2.78
M.S. Ribbed/ Deformed Bar (Grade 300) 1.0200 kg 54.00 55.08
Subtotal-A: 61.59
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 62.82
Note : Rates of all items should be inclusive of all supply and carriage. Page: 173 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.11.05.2 RB 400 / 400W: Ribbed or Deformed bar produced and marked as per kg
BDS ISO 6935-2:2006 with minimum yield stress, fy (ReH) = 400 MPa,
but the actual yield strength based on mill tests does not exceed fy by
more than the 125 MPa, the ratio of actual ultimate strength, fu (Re) to
actual tensile yield strength (fy) shall be at least 1.25 and minimum
elongation after fracture (A5.65) & minimum total elongation at
maximum force (Agt) is 14% and 2.5% respectively.
GI Wire (22 BWG) 0.0100 kg 90.00 0.90
Re-bar Fabricator 0.0030 day 570.00 1.71
Skilled Labour 0.0025 day 450.00 1.13
Ordinary Labour 0.0075 day 370.00 2.78
M.S. Ribbed/ Deformed Bar (Grade 400) 1.0200 kg 58.00 59.16
Subtotal-A: 65.67
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 66.98
Note : Rates of all items should be inclusive of all supply and carriage. Page: 174 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.11.05.3 Grade 420 (B420DWR): Ribbed or Deformed bar produced and marked kg
as per ISO 6935-2:2015/ ASTM A706M - 16 with minimum yield
strength, fy(ReH) = 420 MPa but fy(ReH) not exceeding 540 MPa, the
ratio of ultimate tensile strength, fu(Rm) to actual yield strength,
fy(ReH) shall be at least 1.25 and minimum elongation in 200mm shall
be at least 14% for bar sizes 10mm through 20mm, at least 12% for
bar sizes 22mm through 32mm and at least 10% for bar sizes 40mm
and 50mm.
GI Wire (22 BWG) 0.0100 kg 90.00 0.90
Re-bar Fabricator 0.0030 day 570.00 1.71
Skilled Labour 0.0025 day 450.00 1.13
Ordinary Labour 0.0075 day 370.00 2.78
M.S. Ribbed/ Deformed Bar (Grade 420) 1.0200 kg 58.00 59.16
Subtotal-A: 65.67
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 66.98
Note : Rates of all items should be inclusive of all supply and carriage. Page: 175 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.11.06 Labour for breaking head of hardened cast-in-situ bored pile/ pre-cast cum
piles to the correct lines and levels from the top of the piles to the cut-
off level as indicated in the approved drawing and exposing pile
reinforcement for embedment in pile cap by any means and disposal of
the debris to an unobjectionable place outside the site premises
including scrapping and removing concrete from steel/ MS rods,
straightening and bending of pile bars, preparation and making of
platform where necessary, carrying, all sorts of handling, stacking the
same properly after clearing, leveling and dressing the site and clearing
the river bed, etc. all complete as per direction of the E-I-C.
Measurement will be given for the actual pile head volume to be
broken.The debris from pile chipping shall be disposed outside the site
premises at an environmentally safe place with minimum traffic
disruption and procuring entity will not be responsilbe for any
irregularities by the party regarding dumping of the debris.
(Measurement will be given for the actual pile head volume to be
broken).
Skilled Labour 0.1500 day 450.00 67.50
Ordinary Labour 9.0000 day 370.00 3330.00
Subtotal-A: 3397.50
Repairing of pile head including materials ( +10.00 % on Subtotal-A ) 339.75
Straightening and bending of pile bars, removing ( +10.00 % on Subtotal-A ) 339.75
the debris to a safe distance, tools & plant,
sundries etc.
Subtotal-A1: 4077.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 4158.54
Note : Rates of all items should be inclusive of all supply and carriage. Page: 176 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.11.07 Labour charge for driving pre-cast RCC piles with drop hammer type rig
in any type of soil, handling and keeping in position and driving with
suitable monkey/drop hammer for small pile otherwise suitable
mechanical means to the required depth including fitting and fixing steel
cap, etc. cost included hire charges of machineries, tools & equipments,
wages of operational staff etc. all complete in all respect as per
approved drawing, specification and direction of the Engineer-in-charge.
Subtotal-A: 171.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 174.42
Note : Rates of all items should be inclusive of all supply and carriage. Page: 177 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 159.67
Preparation of Machine Base/Platform ( +75.00 % on Subtotal-A ) 119.75
Subtotal-A1: 279.42
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 285.01
Note : Rates of all items should be inclusive of all supply and carriage. Page: 178 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 223.39
Preparation of Machine Base/Platform ( +75.00 % on Subtotal-A ) 167.55
Subtotal-A1: 390.94
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 398.76
Note : Rates of all items should be inclusive of all supply and carriage. Page: 179 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 185.10
Preparation of Machine Base/Platform ( +75.00 % on Subtotal-A ) 138.82
Subtotal-A1: 323.92
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 330.40
Note : Rates of all items should be inclusive of all supply and carriage. Page: 180 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 339.84
Preparation of Machine Base/Platform ( +75.00 % on Subtotal-A ) 254.88
Subtotal-A1: 594.73
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 606.62
Note : Rates of all items should be inclusive of all supply and carriage. Page: 181 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 226.11
Preparation of Machine Base/Platform ( +75.00 % on Subtotal-A ) 169.59
Subtotal-A1: 395.70
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 403.61
Note : Rates of all items should be inclusive of all supply and carriage. Page: 182 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 472.61
Preparation of Machine Base/Platform ( +75.00 % on Subtotal-A ) 354.46
Subtotal-A1: 827.06
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 843.60
Note : Rates of all items should be inclusive of all supply and carriage. Page: 183 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 339.84
Preparation of Machine Base/Platform ( +75.00 % on Subtotal-A ) 254.88
Subtotal-A1: 594.73
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 606.62
Note : Rates of all items should be inclusive of all supply and carriage. Page: 184 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 678.66
Preparation of Machine Base/Platform ( +75.00 % on Subtotal-A ) 508.99
Subtotal-A1: 1187.65
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 1211.40
Note : Rates of all items should be inclusive of all supply and carriage. Page: 185 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 465.27
Form Work: ( +2.00 % on Subtotal-A ) 9.31
Subtotal-A1: 474.58
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 484.07
Note : Rates of all items should be inclusive of all supply and carriage. Page: 186 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 304.91
Form Work: ( +1.00 % on Subtotal-A ) 3.05
Subtotal-A1: 307.96
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 314.12
Note : Rates of all items should be inclusive of all supply and carriage. Page: 187 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 176.99
Form Work: ( +2.00 % on Subtotal-A ) 3.54
Subtotal-A1: 180.52
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 184.14
Note : Rates of all items should be inclusive of all supply and carriage. Page: 188 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 321.27
Form Work: ( +2.00 % on Subtotal-A ) 6.43
Subtotal-A1: 327.69
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 334.25
Note : Rates of all items should be inclusive of all supply and carriage. Page: 189 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 241.55
Form Work: ( +2.00 % on Subtotal-A ) 4.83
Subtotal-A1: 246.38
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 251.31
Note : Rates of all items should be inclusive of all supply and carriage. Page: 190 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 154.48
Form Work: ( +2.00 % on Subtotal-A ) 3.09
Subtotal-A1: 157.57
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 160.72
Note : Rates of all items should be inclusive of all supply and carriage. Page: 191 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 88.52
Form Work: ( +2.00 % on Subtotal-A ) 1.77
Subtotal-A1: 90.29
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 92.10
Note : Rates of all items should be inclusive of all supply and carriage. Page: 192 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 102.54
Form Work: ( +2.50 % on Subtotal-A ) 2.56
Subtotal-A1: 105.11
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 107.21
Note : Rates of all items should be inclusive of all supply and carriage. Page: 193 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 104.36
Form Work: ( +2.50 % on Subtotal-A ) 2.61
Subtotal-A1: 106.96
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 109.10
Note : Rates of all items should be inclusive of all supply and carriage. Page: 194 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 82.52
Form Work: ( +2.50 % on Subtotal-A ) 2.06
Subtotal-A1: 84.58
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 86.28
Note : Rates of all items should be inclusive of all supply and carriage. Page: 195 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.11.09 LC-CCB(PW): Labour charge for laying single layer CC Block of different cum
sizes on slope of embankment, including preparation of slopes by
cutting or filling with ramming the filled up earth to the same profile as
that of the finished slope level, including carrying CC blocks, supplying
and filling the interstices tightly with local sand (FM - 0.5), etc. all
complete in all respect as per approved drawing, specification and
direction of the Engineer-in-charge. [Excluding the cost of CC Blocks].
Mason 0.0200 day 550.00 11.00
Skilled Labour 0.3000 day 450.00 135.00
Ordinary Labour 1.3000 day 370.00 481.00
Subtotal-A: 627.00
Bamboo Ladder, Jute Rope, Tools, etc. ( +10.00 % on Subtotal-A ) 62.70
Subtotal-A1: 689.70
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 703.49
Note : Rates of all items should be inclusive of all supply and carriage. Page: 196 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.11.10 WMCCBSS-20(PW): Providing and laying cast in place 12 BWG G.I. wire sqm
meshed Cement Concrete Blocks (1000mm X 1000mm X 100mm) at
bridge approaches/road slopes with cement conforming to BDS EN 197-
1 : 2003 CEM-II/A-M 42.5N, sand of minimum FM 1.5 and 25 mm down
well graded shingles (LAA value not exceeding 35) to attain a minimum
28 days cylinder strength of 20MPa (suggested mix proporation 1:2:4),
including grading, washings shingles, shuttering, mixing in satndard
concrete mixture machine, casting with supplying and laying 75mm
rhombus 12 BWG G.I. wire mesh for required size and length in CC
Block, placing mesh in the middle of CC block as it should be,
compacting concrete properly, curing for 28 days, including preparation
of slopes by cutting or filling with ramming the filled up earth to the
same profile as that of the finished slope level, etc. all complete in all
respect as per approved drawing, specification and direction of the
Engineer-in-charge. (Unit cost including all materials, shuttering,
casting, curing for 28 days, and all other incidental charges, etc.)
Stone Shingles (20mm down graded) 0.0857 m3 3500.00 299.95
Sand (FM - 1.5) 0.0428 m3 795.00 34.03
Portland Composite Cement (CEM-II/A-L/M/V/W 42.5N) 0.6040 bag 430.00 259.72
GI Wire Net (12 BWG) [Rhombus Size 75mm] 1.0000 m2 100.00 100.00
Mason 0.0050 day 550.00 2.75
Skilled Labour 0.0500 day 450.00 22.50
Ordinary Labour 0.2000 day 370.00 74.00
H.C. of Concrete Mixture Machine (Capacity 0.40/ 0.28 cum) 0.0010 day 1200.00 1.20
Subtotal-A: 794.15
Form works ( +2.50 % on Subtotal-A ) 19.85
Subtotal-A1: 814.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 830.28
Note : Rates of all items should be inclusive of all supply and carriage. Page: 197 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Total: 1014.79
Subtotal-A: 114.70
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 116.99
Note : Rates of all items should be inclusive of all supply and carriage. Page: 198 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 114.70
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 116.99
Note : Rates of all items should be inclusive of all supply and carriage. Page: 199 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 120.05
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 122.45
Note : Rates of all items should be inclusive of all supply and carriage. Page: 200 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 130.75
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 133.37
Note : Rates of all items should be inclusive of all supply and carriage. Page: 201 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 146.80
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 149.74
Note : Rates of all items should be inclusive of all supply and carriage. Page: 202 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.11.12 LC-Geo-Tex: Labour charge for laying of a geo-textile filter between CC sqm
blocks and embankment slopes properly with non-woven needle
punched type geo- textile filter of different grades for effective erosion
protection in hydraulic structures/river training works including local
handling, placing in proper position, leveling, dressing, maintaining
slope, etc. all complete in all respect as per approved drawing,
specification and direction of the Engineer-in-charge.
Skilled Labour 0.0100 day 450.00 4.50
Ordinary Labour 0.0300 day 370.00 11.10
Subtotal-A: 15.60
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 15.91
Note : Rates of all items should be inclusive of all supply and carriage. Page: 203 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 3693.58
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 3767.46
Note : Rates of all items should be inclusive of all supply and carriage. Page: 204 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Note : Rates of all items should be inclusive of all supply and carriage. Page: 205 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Note : Rates of all items should be inclusive of all supply and carriage. Page: 206 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 3691.95
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 3765.79
Note : Rates of all items should be inclusive of all supply and carriage. Page: 207 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 2174.44
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 2217.93
Note : Rates of all items should be inclusive of all supply and carriage. Page: 208 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 3525.73
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 3596.24
Note : Rates of all items should be inclusive of all supply and carriage. Page: 209 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 513.35
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 523.62
Note : Rates of all items should be inclusive of all supply and carriage. Page: 210 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 866.05
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 883.37
Note : Rates of all items should be inclusive of all supply and carriage. Page: 211 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 49.15
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 50.13
Note : Rates of all items should be inclusive of all supply and carriage. Page: 212 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.11.18 CHB-PW(Ø75mm): Closed hole bamboo palisading with matured borak sqm
bamboo of minimum diameter of 75mm including driving at least half of
its length below G.L. including carrying of all materials, fitting fixing with
half split borak bamboo runners @450mm c/c horizontally with iron
nails, GI wire etc. with double tarza etc. all complete in all respect as
per approved drawing, specification and direction of the Engineer-in-
charge. (Payment will be made for the work above ground water levels).
Tarza 0.7500 m2 210.00 157.50
Skilled Labour 0.1000 day 450.00 45.00
Ordinary Labour 0.4000 day 370.00 148.00
Borak Bamboo (75mm dia) 18.0000 m 38.00 684.00
Nails/ Nut bolts/ Screw/ Spikes 0.2000 kg 65.00 13.00
GI Wire (22 BWG) 0.1200 kg 90.00 10.80
Subtotal-A: 1058.30
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 1079.47
Note : Rates of all items should be inclusive of all supply and carriage. Page: 213 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.11.19.1 BDS-PW: Providing Palisading with Bitumen drum sheet walling tied with sqm
20 gauge G.I. wire, fixing the same with already driven bamboo posts
with half split Borrak bamboo (75mm to 100mm dia) runners @450mm
c/c horizontally with iron nail, G.I wire etc. all complete in all respect as
per approved drawing, specification and direction of the Engineer-in-
charge. (Cost excluded the bamboo posts)
Bitumen Drum Sheet 1.0000 m2 269.00 269.00
Skilled Labour 0.0100 day 450.00 4.50
Ordinary Labour 0.4000 day 370.00 148.00
Borak Bamboo (75mm to 100mm) 1.5000 m 42.00 63.00
GI Wire (22 BWG) 0.1000 kg 90.00 9.00
Nails/ Nut bolts/ Screw/ Spikes 0.1500 kg 65.00 9.75
Subtotal-A: 503.25
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 513.32
Note : Rates of all items should be inclusive of all supply and carriage. Page: 214 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 1239.92
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 1264.72
Note : Rates of all items should be inclusive of all supply and carriage. Page: 215 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.11.20 GBW(1:8)-PW: Providing single layer gunny bag barrier/wall for toe sqm
protection with cement (conforming to BDS EN 197-1 : 2003 CEM-II/A-
M 42.5N) and sand (FM-1.00) mortar 1:8 filled gunny bags [minimum
size L: 650mmX W:400mmX H:175mm], including washing of sand,
mixing in standard mixture machine, filled & tamping the bags in place,
stitching bags by hand sewing machine, curing by sprinkling water over
the bags, including preparation of trenches (bed) by cutting or filling
with ramming the filled up earth to the same profile as that of the
finished toe level, placing the filled gunny bags along the toe line by
avoiding vertical joints, etc. all complete in all respect as per approved
drawing, specification and direction of the Engineer-in-charge. Rate is
inclusive of cost of all materials, labour and all incidental charges in this
connection.
Sand (FM - 0.8) 0.3203 m3 480.00 153.74
Portland Composite Cement (CEM-II/A-L/M/V/W 42.5N) 1.1301 bag 430.00 485.94
Empty Gunny Bag 8.0000 each 30.00 240.00
Mason 0.1000 day 550.00 55.00
Skilled Labour 0.1000 day 450.00 45.00
Ordinary Labour 1.0000 day 370.00 370.00
H.C. of Concrete Mixture Machine (Capacity 0.40/ 0.28 cum) 0.1000 day 1200.00 120.00
Subtotal-A: 1469.69
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 1499.08
Note : Rates of all items should be inclusive of all supply and carriage. Page: 216 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 882.21
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 899.86
Note : Rates of all items should be inclusive of all supply and carriage. Page: 217 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.11.22 DSFGB: Supplying & dumping of soil filled geo-textile bags of different
size and capacity (fill volume and weight when filled with dry
sand/earth) at the specified locations along the bottom of piles of piers/
toe line properly, including loading, unloading, carrying geo-bags from
stack-yard to dumping place by head load and power driven flat top
country boat etc. including supplying of geo-textile bags (empty) of
different sizes and capacity at project/work site conforming to the
following Technical Specifications, filling of empty geo-textile bags of
different sizes with suitable soil, stitching the bags by hand sewing
machine in accordance with the detailed drawing and technical
specifications with plastic thread, protecting the geo-textile bags from
UV ray or any other damages and dumping the same in position etc.
including higher charge and mobilization of all equipment, materials,
labours, taxes, incidental charges etc. complete in all respect as per
approved drawing, specification and direction of E-I-C.
Note : Rates of all items should be inclusive of all supply and carriage. Page: 218 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.11.22.01 Geo-Textile Bag: Empty Size: 800mm x 650mm, Fill Volumn: 0.0520 bag
cum & Weight: 80 Kg, [Geo-Textile Grade: Grade-III-DF-40-2.3mm
thick]
Geo Textile (Grade-III-DF-40-2.3mm thick) 1.1900 m2 65.00 77.35
Royalty of Earth 0.0520 m3 25.00 1.30
Skilled Labour 0.0070 day 450.00 3.15
Ordinary Labour 0.0514 day 370.00 19.02
H.C. of Sewing Machine 0.0029 day 500.00 1.45
H.C. of Cutter (Geo-Textile) 0.0017 day 500.00 0.85
Subtotal-A: 103.12
Cost of Polyproplene/ Nylon thread & other ( +5.00 % on Subtotal-A ) 5.16
consumables etc.
Subtotal-A1: 108.27
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 110.44
Note : Rates of all items should be inclusive of all supply and carriage. Page: 219 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.11.22.02 Geo-Textile Bag: Empty Bag Size: 900mm x 700mm, Fill Volumn: bag
0.0730 cum & Weight: 110 Kg, [Geo-Textile Grade: Grade-III-DF-40-
2.3mm thick]
Geo Textile (Grade-III-DF-40-2.3mm thick) 1.4250 m2 65.00 92.63
Operator 0.0033 day 570.00 1.88
Helper 0.0017 day 400.00 0.68
Royalty of Earth 0.0730 m3 25.00 1.83
Foreman 0.0002 day 800.00 0.16
Skilled Labour 0.0040 day 450.00 1.80
Ordinary Labour 0.0600 day 370.00 22.20
H.C. of Sewing Machine 0.0033 day 500.00 1.65
H.C. of Cutter (Geo-Textile) 0.0020 day 500.00 1.00
Subtotal-A: 123.82
Cost of Polyproplene/ Nylon thread & other ( +5.00 % on Subtotal-A ) 6.19
consumables etc.
Subtotal-A1: 130.01
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 132.61
Note : Rates of all items should be inclusive of all supply and carriage. Page: 220 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.11.22.03 Geo-Textile Bag: Empty Bag Size: 950mm x 750mm, Fill Volumn: bag
0.0840 cum & Weight: 125 Kg, [Geo-Textile Grade: Grade-III-DF-40-
2.3mm thick]
Geo Textile (Grade-III-DF-40-2.3mm thick) 1.6000 m2 65.00 104.00
Operator 0.0033 day 570.00 1.88
Helper 0.0020 day 400.00 0.80
Royalty of Earth 0.0840 m3 25.00 2.10
Foreman 0.0002 day 800.00 0.16
Skilled Labour 0.0040 day 450.00 1.80
Ordinary Labour 0.0700 day 370.00 25.90
H.C. of Sewing Machine 0.0033 day 500.00 1.65
H.C. of Cutter (Geo-Textile) 0.0017 day 500.00 0.85
Subtotal-A: 139.14
Cost of Polyproplene/ Nylon thread & other ( +5.00 % on Subtotal-A ) 6.96
consumables etc.
Subtotal-A1: 146.10
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 149.02
Note : Rates of all items should be inclusive of all supply and carriage. Page: 221 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.11.22.04 Geo-Textile Bag: Empty Bag Size: 1075mm x 850mm, Fill Volumn: bag
0.1164 cum & Weight: 175 Kg, [Geo-Textile Grade: Grade-V-DF-60-
3.0mm thick]
Geo Textile (Grade-V-DF-60-3.0mm thick) 2.0250 m2 90.00 182.25
Operator 0.0040 day 570.00 2.28
Helper 0.0020 day 400.00 0.80
Royalty of Earth 0.1164 m3 25.00 2.91
Foreman 0.0002 day 800.00 0.16
Skilled Labour 0.0040 day 450.00 1.80
Ordinary Labour 0.0800 day 370.00 29.60
H.C. of Sewing Machine 0.0040 day 500.00 2.00
H.C. of Cutter (Geo-Textile) 0.0025 day 500.00 1.25
Subtotal-A: 223.05
Cost of Polyproplene/ Nylon thread & other ( +5.00 % on Subtotal-A ) 11.15
consumables etc.
Subtotal-A1: 234.20
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 238.89
Note : Rates of all items should be inclusive of all supply and carriage. Page: 222 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.11.22.05 Geo-Textile Bag: Empty Bag Size: 1100mm x 850mm, Fill Volumn: bag
0.1333 cum & Weight: 200 Kg, [Geo-Textile Grade: Grade-V-DF-60-
3.0mm thick]
Geo Textile (Grade-V-DF-60-3.0mm thick) 2.0700 m2 90.00 186.30
Operator 0.0040 day 570.00 2.28
Helper 0.0020 day 400.00 0.80
Royalty of Earth 0.1333 m3 25.00 3.33
Foreman 0.0002 day 800.00 0.16
Skilled Labour 0.0040 day 450.00 1.80
Ordinary Labour 0.0900 day 370.00 33.30
H.C. of Sewing Machine 0.0040 day 500.00 2.00
H.C. of Cutter (Geo-Textile) 0.0025 day 500.00 1.25
Subtotal-A: 231.22
Cost of Polyproplene/ Nylon thread & other ( +5.00 % on Subtotal-A ) 11.56
consumables etc.
Subtotal-A1: 242.78
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 247.64
Note : Rates of all items should be inclusive of all supply and carriage. Page: 223 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.11.22.06 Geo-Textile Bag: Empty Bag Size: 1300mm x 1050mm, Fill Volumn: bag
0.1664 cum & Weight: 250 Kg, [Geo-Textile Grade: Grade-V-DF-60-
3.0mm thick]
Geo Textile (Grade-V-DF-60-3.0mm thick) 2.9700 m2 90.00 267.30
Operator 0.0040 day 570.00 2.28
Helper 0.0020 day 400.00 0.80
Royalty of Earth 0.1664 m3 25.00 4.16
Foreman 0.0002 day 800.00 0.16
Skilled Labour 0.0040 day 450.00 1.80
Ordinary Labour 0.1000 day 370.00 37.00
H.C. of Sewing Machine 0.0040 day 500.00 2.00
H.C. of Cutter (Geo-Textile) 0.0025 day 500.00 1.25
Subtotal-A: 316.75
Cost of Polyproplene/ Nylon thread & other ( +5.00 % on Subtotal-A ) 15.84
consumables etc.
Subtotal-A1: 332.59
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 339.24
Note : Rates of all items should be inclusive of all supply and carriage. Page: 224 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.11.23 DSFPB: Supplying and Dumping of soil filled Plastic bags at the specified bag
locations bridge approaches/damaged slope areas properly (Each bag
shall be 50kg Capacity minimum), including supplying of plastic bags,
filling with suitable soil and stitching bags by hand sewing machine
properly with plastic thread and dumping the same in position etc. all
complete in all respect as per approved drawing, specification and
direction of the Engineer-in-charge. (Unit cost including Plastic Bags,
Stitching of bags, Filled with suitable soil, Dumping at specified locations
and all other incidental charges, etc.)
Empty Plastic Cement/Fertilizer Bag 1.0000 each 10.00 10.00
Royalty of Earth 0.0300 m3 25.00 0.75
Skilled Labour 0.0067 day 450.00 3.02
Ordinary Labour 0.0733 day 370.00 27.12
Subtotal-A: 40.89
Cost of Polyproplene/ Nylon thread & other ( +3.00 % on Subtotal-A ) 1.23
consumables etc.
Subtotal-A1: 42.11
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 42.95
3.11.24 JGT_RBP: Supplying and laying of natural additive treated woven type
double warp plain weave jute geo-textile (JGT) conforming to BDS
1909: 2016 for river bank and slope protection work including local
handling, unrolling, placing in position, ensuring proper drapability (JGT
should touch the ground surface at all points), stapling JGT by 6mm dia.
U-shapped pegs/ hooknails or 37mm long mushroom shaped nails at an
interval of 300mm with overlaps of 100mm, protecting the JGT from
any other damages etc. all complete in all respect as per instructions
given in Annexure-B (JGT Installation Guideline for River Bank
Protection) of BDS 1909 : 2016 and approval of Engineer-In-Charge.
Note : Rates of all items should be inclusive of all supply and carriage. Page: 225 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.11.24.01 JGT_RBP-1: Applicable for mild to moderate River River Bank Protection sqm
work. This type of treated JGT shall have the following requirements.
Ends x Picks /dm ≥ 85 x 32, Width(m) ≥ 1, Mass per unit area (gsm) =
627 ± 15%, Thickness under 2 kPa pressure (mm) = 2.0 ± 20%, AOS
(O95) (μm) ≤ 150, Vertical Permeability (m/sec) ≥ 1.0 x10-3,
Horizontal Permeability (m/sec) ≥ 6.0 x10-3, Grab Tensile Strength (N)
MD x CD ≥ 950 x 230, Grab Tensile Elongation (%) MD x CD ≤ 35 x 45,
CBR Puncture Resistance (N) ≥ 2500, Wide Width Tensile Strength
(KN/m) MD x CD ≥ 20 x 10, Wide Width Elongation (%) MD x CD ≤ 12
x 10.
Jute Geo-Textile (JGT): Natural Additive Treated Double 1.0800 sqm 139.00 150.12
Warp Plain Weave - 627 gsm
Skilled Labour 0.0100 day 450.00 4.50
Ordinary Labour 0.0200 day 370.00 7.40
Subtotal-A: 162.02
Cost of U-shaped peg, mashroom nails etc. ( +10.00 % on Subtotal-A ) 16.20
Subtotal-A1: 178.22
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 181.79
Note : Rates of all items should be inclusive of all supply and carriage. Page: 226 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.11.25 JGT-HSM: Supplying and laying of open mesh Plain Weave jute geo-
textile (JGT) commonly known as Soil Saver of different grades
conforming to BDS 1909: 2016 for Hill Slope Management work
including local handling, unrolling, placing in position, unrolling of JGT in
the direction of surface run-off, stapling JGT by 6mm dia. U-shapped
hooknails at an interval of 300mm with overlaps of 100mm at the sides
and 150mm at the ends, anchoring JGT within a trench at the two ends
by filling the trench with big bats/gravel or other suitable materials,
ensuring proper drapability (JGT must touch the ground surface at all
points), filling drain materials immediately after laying of JGT, protecting
the JGT from any other damages etc. all complete in all respect as per
instructions given in Annexure-C (JGT Installation Guideline for Hill
Slope Management) of BDS 1909 : 2016 and approval of Engineer-In-
Charge.
Note : Rates of all items should be inclusive of all supply and carriage. Page: 227 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.11.25.01 JGT_HSM-1: Applicable for Moderate slope (≤35 degree) & annual sqm
rainfall ≤ 2000mm. This type of JGT shall have the following
requirements.
Ends x Picks /dm ≥ 6.5 x 4.5, Width(m) = 1.22, Mass per unit area
(gsm) = 500 ± 10%, Thickness under 2 kPa pressure (mm) = 4.5 ±
10%, Water Holding Capacity (% by weight) ≥ 400, Wide Width Tensile
Strength (kN/m) MD x CD ≥ 6.5 x 6.0, Wide Width Elongation (%) MD x
CD ≤ 14.0 x 14.0.
Jute Geo-Textile (JGT): Open Mesh Plain Weave (Soil Saver) - 1.0800 sqm 29.00 31.32
500 gsm
Skilled Labour 0.0100 day 450.00 4.50
Ordinary Labour 0.0200 day 370.00 7.40
Subtotal-A: 43.22
Cost of U-shaped peg, mashroom nails etc. ( +10.00 % on Subtotal-A ) 4.32
Subtotal-A1: 47.54
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 48.49
Note : Rates of all items should be inclusive of all supply and carriage. Page: 228 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.11.25.02 JGT_HSM-2: Applicable for Moderate slope (≤35 degree) & annual sqm
rainfall ≥ 2000mm and steep stope (>35 degree to ≤ 45 degree) &
annual rainfall ≤ 2000mm. This type of JGT shall have the following
requirements.
Ends x Picks /dm ≥ 8 x 7, Width(m) = 1.22, Mass per unit area (gsm) =
600±10%, Thickness under 2 kPa pressure (mm) = 5.5±10%, Water
Holding Capacity (% by weight) ≥ 400, Wide Width Tensile Strength
(kN/m) MD x CD ≥ 12.0 x 6.0, Wide Width Elongation (%) MD x CD ≤
14.0 x 14.0.
Jute Geo-Textile (JGT): Open Mesh Plain Weave (Soil Saver) - 1.0800 sqm 32.00 34.56
600 gsm
Skilled Labour 0.0100 day 450.00 4.50
Ordinary Labour 0.0200 day 370.00 7.40
Subtotal-A: 46.46
Cost of U-shaped peg, mashroom nails etc. ( +10.00 % on Subtotal-A ) 4.65
Subtotal-A1: 51.11
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 52.13
Note : Rates of all items should be inclusive of all supply and carriage. Page: 229 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.11.25.03 JGT_HSM-3: Applicable for steep stope (>35 degree to ≤ 45 degree) & sqm
annual rainfall > 2000mm. This type of JGT shall have the following
requirements.
Ends x Picks /dm ≥ 8 x 8, Width(m) = 1.22, Mass per unit area (gsm) =
700±10%, Thickness under 2 kPa pressure (mm) = 5.5±10%, Water
Holding Capacity (% by weight) ≥ 400, Wide Width Tensile Strength
(kN/m) MD x CD ≥ 14.0 x 7.0, Wide Width Elongation (%) MD x CD ≤
14.0 x 14.0.
Jute Geo-Textile (JGT): Open Mesh Plain Weave (Soil Saver) - 1.0800 sqm 35.00 37.80
700 gsm
Skilled Labour 0.0100 day 450.00 4.50
Ordinary Labour 0.0200 day 370.00 7.40
Subtotal-A: 49.70
Cost of U-shaped peg, mashroom nails etc. ( +10.00 % on Subtotal-A ) 4.97
Subtotal-A1: 54.67
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 55.76
3.11.26 JGT_RRC: Supplying and laying of woven type untreated double warp
plain weave jute geo-textile (JGT) of different grades conforming to BDS
1909: 2016 for strengthening subgrade of Road & Bridge approach
including local handling, unrolling, placing in position, ensuring proper
drapability (JGT should touch the ISG surface at all points), stapling JGT
by 6mm dia. U-shapped pegs/ hooknails or 37mm long mushroom
shaped nails at an interval of 300mm with overlaps of 100mm,
protecting the JGT from any other damages etc. all complete in all
respect as per instructions given in Annexure-A (JGT Installation
Guideline for Rural Road Construction) of BDS 1909 : 2016 and
approval of Engineer-In-Charge.
Note : Rates of all items should be inclusive of all supply and carriage. Page: 230 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 118.82
Cost of U-shaped peg, mashroom nails etc. ( +10.00 % on Subtotal-A ) 11.88
Subtotal-A1: 130.70
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 133.32
Note : Rates of all items should be inclusive of all supply and carriage. Page: 231 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 138.26
Cost of U-shaped peg, mashroom nails etc. ( +10.00 % on Subtotal-A ) 13.83
Subtotal-A1: 152.09
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 155.13
Note : Rates of all items should be inclusive of all supply and carriage. Page: 232 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Note : Rates of all items should be inclusive of all supply and carriage. Page: 233 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 3706.06
Cost of welding & other consumables etc. ( +5.00 % on Subtotal-A ) 185.30
Subtotal-A1: 3891.36
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 3969.19
Note : Rates of all items should be inclusive of all supply and carriage. Page: 234 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.12.01.1 kmPost: Providing, fitting and fixing rectangular Kilometer Post as per each
standard drawing enumerated in Appendix-6 (type design for Kilometer
post) with Reinforced Cement Concrete (1:2:4) Plate with 20mm down
well graded brick chips in correct position true to line and level,
including cost of providing 4 nos. of 12mm dia M.S. rods in vertical
direction of length 1085mm and 7nos. Of 10mm dia M.S. rods in
horizontal direction of length 520mm, RCC Plate firmly fixed to the
ground by means properly designed foundation as per approved
drawing with 1st class bricks work in cement mortar (1:4), filling the
interstices tightly with mortar, raking out joints, cleaning and soaking
bricks at least for 24 hours before use, washing of sand, including 6mm
thick plaster (1:4) in all exposed portion, curing for requisite period,
with two coat of painting on the exposed portion of the post with best
quality synthetic enamel paint of approved brand of different shades
over a coat of priming, including carriage of the post to the site with
loading & unloading and printing of letters and numbers, etc. all
complete in all respect as per approved drawing, specification and
direction of the Engineer-in-charge. Rate is inclusive of cost of all
materials, labour and all incidental charges in this connection.
Earthwork in excavation of foundation trenches, including 0.2450 cum 75.80 18.57
layout, ……. (2.04.1.1)
Brick work with 1st class bricks in cement mortar (1:4) in 0.1390 cum 5849.80 813.12
foundation and plinth….(5.04.02)
Providing and laying reinforced, cement concrete pavement 0.0510 cum 6851.66 349.43
over a prepared sub-base with picked brick chips and
minimum cement content relates to mix ratio 1:2:4 satisfying
……… (3.07.2.1)
M.S. Ribbed bar of steel grade RB 300 with minimum fy=300 6.0960 kg 61.59 375.45
Mpa ………. (3.11.05.1)
Minimum 6mm thick cement plaster (1:4) to ceiling RCC 1.9430 sqm 168.65 327.68
columns, beams for Ground Floor……….. (5.12.03.01)
Earthwork in excavation of foundation trenches, including 0.0490 cum 75.80 3.71
layout, ……. (2.04.1.1)
Painting with Synthetic Enamel paint………. (3.12.5.1) 1.0670 sqm 166.35 177.49
Subtotal-A: 2065.47
Note : Rates of all items should be inclusive of all supply and carriage. Page: 235 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 2359.59
Note : Rates of all items should be inclusive of all supply and carriage. Page: 236 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.12.01.2 RNPlate: Providing, fitting and fixing rectangular Road Name Plate as each
per standard drawing enumerated in Appendix-6 (type design for Road
Name Plate) with Reinforced Cement Concrete (1:2:4) Plate with 20mm
down well graded brick chips in correct position true to line and level,
including cost of providing 7 nos. of 12mm dia M.S. rods in vertical
direction of length 1125mm and 8nos. Of 10mm dia M.S. rods in
horizontal direction of length 970mm, RCC Plate firmly fixed to the
ground by means properly designed foundation as per approved
drawing with 1st class bricks work in cement mortar (1:4), filling the
interstices tightly with mortar, raking out joints, cleaning and soaking
bricks at least for 24 hours before use, washing of sand, including 6mm
thick plaster (1:4) in all exposed portion, curing for requisite period,
with two coat of painting on the exposed portion of the post with best
quality synthetic enamel paint of approved brand of different shades
over a coat of priming, including carriage of the post to the site with
loading & unloading and printing of letters and numbers, etc. all
complete in all respect as per approved drawing, specification and
direction of the Engineer-in-charge. Rate is inclusive of cost of all
materials, labour and all incidental charges in this connection.
Earthwork in excavation of foundation trenches, including 0.4890 cum 75.80 37.07
layout, ……. (2.04.1.1)
Brick work with 1st class bricks in cement mortar (1:4) in 0.2780 cum 5849.80 1626.24
foundation and plinth….(5.04.02)
Providing and laying reinforced, cement concrete pavement 0.0950 cum 6851.66 650.91
over a prepared sub-base with picked brick chips and
minimum cement content relates to mix ratio 1:2:4 satisfying
……… (3.07.2.1)
M.S. Ribbed bar of steel grade RB 300 with minimum fy=300 11.7420 kg 61.59 723.19
Mpa ………. (3.11.05.1)
Minimum 6mm thick cement plaster (1:4) to ceiling RCC 3.5330 sqm 168.65 595.83
columns, beams for Ground Floor……….. (5.12.03.01)
Earthwork in excavation of foundation trenches, including 0.0980 cum 75.80 7.43
layout, ……. (2.04.1.1)
Painting with Synthetic Enamel paint………. (3.12.5.1) 1.7780 sqm 166.35 295.77
Subtotal-A: 3936.43
Note : Rates of all items should be inclusive of all supply and carriage. Page: 237 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Writing of Road Name Plate post with approved ( +12.00 % on Subtotal-A ) 472.37
colour
Subtotal-A1: 4408.81
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 4496.98
Note : Rates of all items should be inclusive of all supply and carriage. Page: 238 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.12.02 RCC-Gpost: Prroviding, fitting and fixing 200mm dia round RCC Guide each
Post 1.70m long as per standard drawing enumerated in Appendix-6
(type design for Guide Post) with Reinforced Cement Concrete (1:2:4)
with 20mm down well graded brick chips casting, curing for requisite
period, including cost of providing 4nos.of 12mm dia. Rod of length
1.65m as main reinforcement and 12 nos. of round shaped 8mm dia
rods used as binders; including two coats of painting with best quality
synthetic enamel paint over a prime coat of approved brand of different
colour and grade to form 6 nos. horizontal alternate bands in
white/yellow and red to 90 cm length standing up above ground,
making hole in ground of 800mm depth and 300m minimum dia, fixing
the guard posts in the same holes and repacking the earth properly so
as to keep the guard posts standing properly erect in correct position
true to line and length including carriage of RCC Guide Post with due
care to the site including loading into the truck and unloading at site
complete in all respect as per approved drawing, specification and
direction of the Engineer-in-charge. Rate is inclusive of cost of all
materials, labour and all incidental charges in this connection.
Earthwork in excavation of foundation trenches, including 0.0860 cum 75.80 6.52
layout, ……. (2.04.1.1)
Providing and laying reinforced, cement concrete pavement 0.0650 cum 6851.66 445.36
over a prepared sub-base with picked brick chips and
minimum cement content relates to mix ratio 1:2:4 satisfying
……… (3.07.2.1)
M.S. Ribbed bar of steel grade RB 300 with minimum fy=300 8.4680 kg 61.59 521.54
Mpa ………. (3.11.05.1)
Earthwork in excavation of foundation trenches, including 0.0170 cum 75.80 1.29
layout, ……. (2.04.1.1)
Painting with Synthetic Enamel paint………. (3.12.5.1) 0.6280 sqm 166.35 104.47
Subtotal-A: 1079.18
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 1100.76
Note : Rates of all items should be inclusive of all supply and carriage. Page: 239 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Total: 1345.37
Note : Rates of all items should be inclusive of all supply and carriage. Page: 240 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.12.03 RS-Plate: Supplying, fitting and fixing of Road Sign plates sqm
(Precautionary/Mandatory/Informative/Direction) made of 18 BWG M.S.
sheet of equilateral triangle/Circular/Rectangular plates of different sizes
as per standard drawing enumerated in Appendix-6 fitted with MS
triangular/Rectangular frame of same size as plates by point welding
(frames made by thorough welding of 25mmX25mmX3mm MS angle
covering all sides of the plates and maximum 150mm center to center in
the middle of frames in each vertical & horizontal directions), Plates are
fitted with 50mm dia & 2.90mm thick GI pipes by continuous welding,
including cutting of MS angle touched with GI pipe and 200mm long 4
nos. 12mm dia anchor bars be fitted at the lower part of the MS pipes
by welding, making finishing, grinding and carrying to the working sites,
etc. all complete in all respect as per design, specification and direction
of the Engineer-in-charge. (Rate excludes the material cost of 50mm dia
MS pipes & 4 nos. 12mm dia anchor bar)
18/20/22 BWG MS Sheet/plate 9.9600 kg 70.00 697.20
MS Angle 25mmx25mmx3mm 14.6360 kg 58.00 848.89
Electrode 0.2300 pkt 810.00 186.30
Foreman 0.0800 day 800.00 64.00
Welder 0.4000 day 680.00 272.00
Skilled Labour 0.1500 day 450.00 67.50
Ordinary Labour 0.6000 day 370.00 222.00
H.C. of Welding Machine 0.3000 day 500.00 150.00
H.C. of Grinding Machine 0.3000 day 100.00 30.00
Subtotal-A: 2537.89
Carrying cost to working site, etc. ( +3.00 % on Subtotal-A ) 76.14
Subtotal-A1: 2614.02
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 2666.31
Note : Rates of all items should be inclusive of all supply and carriage. Page: 241 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Total: 3258.82
Note : Rates of all items should be inclusive of all supply and carriage. Page: 242 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.12.04.1 600mm equilateral triangle with 671mm X 202mm supplementary Plate each
(For Precautionary Sign)
Earthwork in excavation of foundation trenches, including 0.3380 cum 75.80 25.62
layout, ……. (2.04.1.1)
2.9mm thick MS Pipe (50mm dia) 3.2700 m 440.00 1438.80
Providing single layer polythene sheet (0.18mm thick)……… 1.4400 sqm 12.68 18.26
(3.07.1)
Cement concrete work in foundation……….. (4.1.10.01.2) 0.1690 cum 6964.15 1176.94
Supplying, fitting and fixing of Road Sign plates………. (3.12.3) 0.3370 sqm 2614.02 880.93
M.S. Ribbed bar of steel grade RB 300 with minimum fy=300 0.7100 kg 61.59 43.73
Mpa ………. (3.11.05.1)
Earthwork in excavation of foundation trenches, including 0.0680 cum 75.80 5.15
layout, ……. (2.04.1.1)
Painting with Synthetic Enamel paint………. (3.12.5.1) 1.2980 sqm 166.35 215.92
Subtotal-A: 3805.35
Writing & Printing of Road Sign with Retro- ( +12.00 % on Subtotal-A ) 456.64
Reflective Paint, etc.
Subtotal-A1: 4261.99
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 4347.23
Note : Rates of all items should be inclusive of all supply and carriage. Page: 243 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.12.04.2 600mm circular with 600mm X 202mm supplementary Plate (For each
Compulsory Sign)
2.9mm thick MS Pipe (50mm dia) 3.2700 m 440.00 1438.80
Earthwork in excavation of foundation trenches, including 0.3380 cum 75.80 25.62
layout, ……. (2.04.1.1)
Providing single layer polythene sheet (0.18mm thick)……… 1.4400 sqm 12.68 18.26
(3.07.1)
Cement concrete work in foundation……….. (4.1.10.01.2) 0.1690 cum 6964.15 1176.94
Supplying, fitting and fixing of Road Sign plates………. (3.12.3) 0.4040 sqm 2614.02 1056.07
M.S. Ribbed bar of steel grade RB 300 with minimum fy=300 0.7100 kg 61.59 43.73
Mpa ………. (3.11.05.1)
Earthwork in excavation of foundation trenches, including 0.0680 cum 75.80 5.15
layout, ……. (2.04.1.1)
Painting with Synthetic Enamel paint………. (3.12.5.1) 1.4320 sqm 166.35 238.21
Subtotal-A: 4002.78
Writing & Printing of Road Sign with Tetro- ( +12.00 % on Subtotal-A ) 480.33
Reflective Paint, etc.
Subtotal-A1: 4483.11
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 4572.77
Note : Rates of all items should be inclusive of all supply and carriage. Page: 244 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.12.04.3 435mm X 500mm Square with 435mm X 202mm supplementary Plate each
(For Informative Sign)
Earthwork in excavation of foundation trenches, including 0.3380 cum 75.80 25.62
layout, ……. (2.04.1.1)
2.9mm thick MS Pipe (50mm dia) 3.2200 m 440.00 1416.80
Providing single layer polythene sheet (0.18mm thick)……… 1.4400 sqm 12.68 18.26
(3.07.1)
Cement concrete work in foundation……….. (4.1.10.01.2) 0.1690 cum 6964.15 1176.94
Supplying, fitting and fixing of Road Sign plates………. (3.12.3) 0.3050 sqm 2614.02 797.28
M.S. Ribbed bar of steel grade RB 300 with minimum fy=300 0.7100 kg 61.59 43.73
Mpa ………. (3.11.05.1)
Earthwork in excavation of foundation trenches, including 0.0680 cum 75.80 5.15
layout, ……. (2.04.1.1)
Painting with Synthetic Enamel paint………. (3.12.5.1) 1.2230 sqm 166.35 203.44
Subtotal-A: 3687.22
Writing & Printing of Road Sign with Tetro- ( +12.00 % on Subtotal-A ) 442.47
Reflective Paint, etc.
Subtotal-A1: 4129.69
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 4212.28
Note : Rates of all items should be inclusive of all supply and carriage. Page: 245 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 3850.15
Writing & Printing of Road Sign with Tetro- ( +11.00 % on Subtotal-A ) 423.52
Reflective Paint, etc.
Subtotal-A1: 4273.67
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 4359.14
Note : Rates of all items should be inclusive of all supply and carriage. Page: 246 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 3275.94
Providing Retro-Reflective Sheeting for Sign ( +15.00 % on Subtotal-A ) 491.39
Subtotal-A1: 3767.33
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 3842.68
Note : Rates of all items should be inclusive of all supply and carriage. Page: 247 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.12.05 Painting the vertical end faces of posts, wheel guard, railing, rail post,
parapet wall, kilometer post, road name plate, guide post, traffic signs,
etc. in two coats with best quality synthetic enamel paint of approved
make and brand of different shades over a coat of priming, applying one
vertical and one horizontal coat for each coat and successive coat is to
be applied after drying up of previous coat by brush/roller/spray,
including cleaning and washing the surface, rubbing and mending good
damages as necessary and necessary scaffolding, etc. all complete in all
respect as direction of the Engineer-in-charge. Rate is inclusive of cost
of all materials, labour and all incidental charges in this connection.
3.12.05.1 Two coats over a prime coat for new concrete surface. sqm
Synthetic Enamel Paint 0.1194 litre 260.00 31.04
Synthetic enamel paint primer/ sealer 0.0833 litre 206.00 17.16
Thinner T-6 of Synthetic Enamel Paint 0.0119 liter 130.00 1.55
Plumber/ Electric Mistry/ Painter 0.0945 day 680.00 64.26
Helper of Plumber/ Electric Mistry/ Painter/ Carpenter/ 0.0945 day 470.00 44.42
Operator
Subtotal-A: 158.43
All other remaining costs covering sand paper, ( +5.00 % on Subtotal-A ) 7.92
putty, scaffolding, etc.
Subtotal-A1: 166.35
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 169.67
Note : Rates of all items should be inclusive of all supply and carriage. Page: 248 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.12.05.2 Two coats for old concrete surface and steel surface. sqm
Synthetic Enamel Paint 0.1194 litre 260.00 31.04
Thinner T-6 of Synthetic Enamel Paint 0.0119 liter 130.00 1.55
Plumber/ Electric Mistry/ Painter 0.0540 day 680.00 36.72
Helper of Plumber/ Electric Mistry/ Painter/ Carpenter/ 0.0540 day 470.00 25.38
Operator
Subtotal-A: 94.69
All other remaining costs covering sand paper, ( +5.00 % on Subtotal-A ) 4.73
putty, scaffolding, etc.
Subtotal-A1: 99.43
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 101.41
Note : Rates of all items should be inclusive of all supply and carriage. Page: 249 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.12.06 Painting and writing on kilometer post, road name plate, traffic signs, sqm
etc. in two coats with best quality synthetic enamel paint of approved
make and brand of different shades, applying one vertical and one
horizontal coat for each coat and successive coat is to be applied after
drying up of previous coat by brush/roller/spray with cleaning and
washing the surface, rubbing and mending good damages as necessary
and necessary scaffolding, including printing new letter and figures of
any shade with synthetic enamel paint black or any other approved
colour to give an even shade etc. all complete in all respect as direction
of the Engineer-in-charge. Rate is inclusive of cost of all materials,
labour and all incidental charges in this connection.
Synthetic Enamel Paint 0.1194 litre 260.00 31.04
Thinner T-6 of Synthetic Enamel Paint 0.0119 liter 130.00 1.55
Plumber/ Electric Mistry/ Painter 0.1000 day 680.00 68.00
Helper of Plumber/ Electric Mistry/ Painter/ Carpenter/ 0.0540 day 470.00 25.38
Operator
Subtotal-A: 125.97
All other remaining costs covering sand paper, ( +100.00 % on Subtotal-A ) 125.97
putty, scaffolding, printing/writing, etc.
Subtotal-A1: 251.94
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 256.98
Note : Rates of all items should be inclusive of all supply and carriage. Page: 250 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.12.07 RMP: Providing and applying road marking paint (lines, dashes, arrows,
etc.) on road hump, pedestrian crossing, lane line, warning line, barrier
line, edge line, zig-zag line, give-way marking, etc. on road/plain surface
by brush/roller in two coats with ready mixed road marking paint,
including cleaning the surface of all dirt, oils, grease, dust and other
contaminants, demarcation at site and traffic control involved. The
finished surface to be level, uniform and free from streaks and holes,
etc. all complete in all respect as direction of the Engineer-in-charge.
Rate is inclusive of cost of all materials, labour machinery, lighting,
guarding, maintenance of diversion and all incidental charges in this
connection.
Subtotal-A: 287.56
All other remaining costs covering sand paper, ( +5.00 % on Subtotal-A ) 14.38
putty, tools, etc.
Subtotal-A1: 301.93
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 307.97
Note : Rates of all items should be inclusive of all supply and carriage. Page: 251 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 234.42
All other remaining costs covering sand paper, ( +5.00 % on Subtotal-A ) 11.72
putty, tools, etc.
Subtotal-A1: 246.14
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 251.07
Note : Rates of all items should be inclusive of all supply and carriage. Page: 252 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.12.08 RMP(By-TPC): Providing and applying road markings of center line and sqm
stop line etc. with 2.5mm thick hot applied thermoplastic compound
including reflectorising glass beads @ 250mgs per sqm area by special
applicator machine on road/plain surface, including cleaning the surface
of all dirt, oils, grease, dust and other contaminants, demarcation at site
and traffic control involved, the finished surface to be level, uniform and
free from streaks and holes, etc. all complete in all respect as direction
of the Engineer-in-charge. Rate is inclusive of cost of all materials,
labour machinery, lighting, guarding, maintenance of diversion and all
incidental charges in this connection.
Thermoplastic Compound 5.0000 kg 121.40 607.00
Reflectorising Glass Beads 0.2500 kg 121.40 30.35
H. C. of Thermoplastic Appilicator Machine 0.0286 day 2000.00 57.20
Foreman 0.0286 day 800.00 22.88
Skilled Labour 0.0571 day 450.00 25.70
Ordinary Labour 0.1143 day 370.00 42.29
Subtotal-A: 785.42
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 801.12
3.12.09 Maintenance and protection of traffic at all times (at all hours during the LS
day and night) along the existing roads, rivers or canals throughout the
working period by maintaining all detours, including additional
embankment filling, necessary barricades, warning lights and guide
signs as well as other equipment, removal of all temporary constructions
on completion of the bridge, etc. all complete as per requirement and
instruction of E-I-C.
Note : Rates of all items should be inclusive of all supply and carriage. Page: 253 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 2301.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 2347.02
Note : Rates of all items should be inclusive of all supply and carriage. Page: 254 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
3.12.11 AR-Paint: Supplying & providing flexible and acrylic type reflectorized sqm
traffic painting/ coating on rail post, rail bar, wheel guard, Guide Post,
Pier column etc. Including cleaning the surface of all dirt, oils, grease,
dust and other contaminants, demarcation at site and traffic control
involved. The finished surface to be level, uniform and free from streaks
and holes, etc. all complete in all respect as direction of the Engineer-in-
charge. Rate is inclusive of cost of all materials, labour machinery,
lighting, guarding and all incidental charges in this connection.
Reflectorized paint 0.1200 liter 2528.00 303.36
Sealer/Primer (for texture paint) 0.0900 litre 200.00 18.00
Plumber/ Electric Mistry/ Painter 0.1500 day 680.00 102.00
Helper of Plumber/ Electric Mistry/ Painter/ Carpenter/ 0.1500 day 470.00 70.50
Operator
Subtotal-A: 493.86
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 503.74
Note : Rates of all items should be inclusive of all supply and carriage. Page: 255 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Note : Rates of all items should be inclusive of all supply and carriage. Page: 256 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 1224.00
Scaffolding & other consumables etc. ( +5.00 % on Subtotal-A ) 61.20
Subtotal-A1: 1285.20
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 1310.90
4.01.01.01.02 Case II: By Manual Means submersed in water cum Add +50.00% with Item No 4.01.01.01.01
Note : Rates of all items should be inclusive of all supply and carriage. Page: 257 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 874.16
Scaffolding & other consumables etc. ( +5.00 % on Subtotal-A ) 43.71
Subtotal-A1: 917.87
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 936.23
4.01.01.01.04 Case IV: By Mechanical Means submersed in water cum Add +50.00% with Item No 4.01.01.01.03
Note : Rates of all items should be inclusive of all supply and carriage. Page: 258 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 432.00
Scaffolding & other consumables etc. ( +5.00 % on Subtotal-A ) 21.60
Subtotal-A1: 453.60
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 462.67
4.01.01.02.02 Case II: By Manual Means submersed in water cum Add +50.00% with Item No 4.01.01.02.01
Note : Rates of all items should be inclusive of all supply and carriage. Page: 259 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 385.95
Scaffolding & other consumables etc. ( +5.00 % on Subtotal-A ) 19.30
Subtotal-A1: 405.25
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 413.35
4.01.01.02.04 Case IV: By Mechanical Means submersed in water cum Add +50.00% with Item No 4.01.01.02.03
Note : Rates of all items should be inclusive of all supply and carriage. Page: 260 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 275.00
Equipment staging etc. ( +5.00 % on Subtotal-A ) 13.75
Subtotal-A1: 288.75
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 294.53
4.01.01.03.02 Case II :By Manual/ Mechanical Means submersed in water cum Add +50.00% with Item No 4.01.01.03.01
4.01.01.04 Steel Work in all types of sections upto a height of 10m above plinth
level including cutting of rivets.
Note : Rates of all items should be inclusive of all supply and carriage. Page: 261 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 1493.00
cost of labour for gas cutting, ropes, pulleys etc. ( +20.00 % on Subtotal-A ) 298.60
Subtotal-A1: 1791.60
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 1827.43
Note : Rates of all items should be inclusive of all supply and carriage. Page: 262 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 1119.00
cost of labour for gas cutting, ropes, pulleys etc. ( +20.00 % on Subtotal-A ) 223.80
Subtotal-A1: 1342.80
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 1369.66
Note : Rates of all items should be inclusive of all supply and carriage. Page: 263 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.01.01.05 Wood Work wrought framed and fixed in frames of trusses upto a cum
height of 10 m above plinth level
Carpenter 0.4000 day 680.00 272.00
Skilled Labour 0.0480 day 450.00 21.60
Ordinary Labour 0.8000 day 370.00 296.00
H.C. of Tractor (4 WD) 0.0200 day 2200.00 44.00
Subtotal-A: 633.60
Equipment staging etc. ( +5.00 % on Subtotal-A ) 31.68
Subtotal-A1: 665.28
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 678.59
Subtotal-A: 11.57
Equipment staging etc. ( +5.00 % on Subtotal-A ) 0.58
Subtotal-A1: 12.15
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 12.39
Note : Rates of all items should be inclusive of all supply and carriage. Page: 264 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.01.01.07 Scraping of Bricks dismantled from Brick Work including Stacking 1000
nos.
Skilled Labour 0.1400 day 450.00 63.00
Ordinary Labour 3.5000 day 370.00 1295.00
Subtotal-A: 1358.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 1385.16
4.01.01.08 Removing & disposing all types of Pre-cast/ cast-in-situ pipes including
Earthwork and Dismantling of Masonry Works.
Subtotal-A: 201.40
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 205.43
Note : Rates of all items should be inclusive of all supply and carriage. Page: 265 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 272.50
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 277.95
Subtotal-A: 466.50
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 475.83
Note : Rates of all items should be inclusive of all supply and carriage. Page: 266 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.01.04 Removal of cement concrete pipe of sewer gutter 1500 mm dia under LS
the supervision of concerned department including disposal with all lifts
and up to a lead of 1Km and stacking of serviceable and unserviceable
material separately but excluding earth excavation and dismantling of
masonry works.
4.01.05 Providing and maintaining semi pucca site office (Appendix 5) with
necessary furniture, sanitary & electrical/ power facilities, water supply
arrangement, office and survey equipment for the use of the Engineer
and his staff, all complete including removal of structures and
restoration of the site on completion of the work. The contractor shall
submit the detailed plan and drawing of the site office for approval of
the engineer. The site office should be provided with sufficient natural
light, heat protecting ceiling, dam proofing etc. as per direction of E-I-C.
All materials, equipment and plant, furniture, fittings recovered from
dismantling the office and removing access road will be the property of
the contractor upon completion of the work. The contractor will
responsilbe for maintaining the facilities of site office in good condition
throughout the contract period and payment of this item shall be made
only with the final bill.
4.01.06 Videography: Providing and carrying out video shoting of roads, bridges,
buildings, other programmes by professional videographer including
hiring of vehicle, equipment for video shooting, titling, lightening,
mixing, lettering, editing including cost of two DVDs of approved makes
and quality etc. all complete as per direction of E-I-C. The edition of the
video film and the script for narration shall be as approved by the
engineer.
Note : Rates of all items should be inclusive of all supply and carriage. Page: 267 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.01.06.01 Within 50 Kilometer from district head quarter for full day day
Videographer 1.0000 day 2500.00 2500.00
Subtotal-A: 2500.00
Video Editing, Digital Storage media etc. all ( +15.00 % on Subtotal-A ) 375.00
complete
Subtotal-A1: 2875.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 2932.50
4.01.06.02 Beyond 50 Kilometer from district head quarter for full day day
Videographer 1.0000 day 2500.00 2500.00
Subtotal-A: 2500.00
Distance beyond 50 KM ( +10.00 % on Subtotal-A ) 250.00
Video Editing, Digital Storage media etc. all ( +15.00 % on Subtotal-A ) 375.00
complete
Subtotal-A1: 3125.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 3187.50
Note : Rates of all items should be inclusive of all supply and carriage. Page: 268 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 1625.00
Video Editing, Digital Storage media etc. all ( +15.00 % on Subtotal-A ) 243.75
complete
Subtotal-A1: 1868.75
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 1906.13
Subtotal-A: 240.00
cost of Image editing, Photo Paper, storage ( +50.00 % on Subtotal-A ) 120.00
media, printing, transport etc.
Subtotal-A1: 360.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 367.20
Note : Rates of all items should be inclusive of all supply and carriage. Page: 269 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.01.08 As-Built Drawings: Providing 3 full sets of as-built drawings of the per
completed works subject to Engineer's approval in AutoCAD software in scheme
standard drawing paper. The As-Built Drawing shall clearly show the
lines and dimensions of the permanent construction actually made
based on the changes to the original design from time to time as
ordered by the Engineer or proposed by the Contractor and approved by
the Engineer. One set of as-built drawings shall be considered for final
measurement and payment. The soft copy of the as-built drawings must
be submitted to the Design Unit, LGED for future reference. If the
contractor does not supply the as-built drawings by the date stated in
the Particular Conditions of Contract (PCC), or they do not receive the
Engineer's approval, the Engineer shall withhold the amount stated in
the PCC from the payment due to the contractor.
CAD Operator 20.0000 day 600.00 12000.00
Subtotal-A: 12000.00
cost of Paper, printing, binding etc. ( +10.00 % on Subtotal-A ) 1200.00
Subtotal-A1: 13200.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 13464.00
Note : Rates of all items should be inclusive of all supply and carriage. Page: 270 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.01.09 Project Profile Signboard: Providing and maintenance one project profile sqm
signboard as per direction of E-I-C, to be placed at a suitable place of
the site including submission of proposals for the materials & size of the
signboards (recommended size: 1800mm x 1200 mm with 2 nos. 75mm
dia. MS post, outer & inner frames of board shall be 50mm x 50mm x
5mm & 20mm x 25mm x 5 mm respectively ) and text layout to the
engineer for approval which will be positioned as directed by the
engineer and removing the same on completeion of the works or as
instructed by the E-I-C. Sheeting will be made of encapsulated lens with
retro-reflective type and messages/ borders will be screen printed. The
text shall mention among others the name of the project, name of the
implementing agency, cost of the project, completion time, name of the
contractor etc.
MS Angle, Flat bar, Z bar 30.0000 kg 59.00 1770.00
75mm dia. MS pipe and wall thickness 4mm 7.3000 m 780.00 5694.00
24 SWG GP Sheet 10.6500 kg 80.00 852.00
Skilled Labour 1.5300 day 450.00 688.50
Subtotal-A: 9004.50
Cost of fabrication, welding, painting, writing, ( +25.00 % on Subtotal-A ) 2251.13
placing in position & PCC (1:2:4) etc.
Subtotal-A1: 11255.63
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 11480.74
Note : Rates of all items should be inclusive of all supply and carriage. Page: 271 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.01.10 Bench Mark Pillar: Manufacturing, supplying & fixing in position RCC each
(1:2:4) Bench Mark Pillars of size 150mm x 150mm x 750mm, with
400mm x 400mm x 100mm base having 3 nos. 10mm dia MS bar each
way at base, 4 nos. 10mm dia vertical bar and 8 nos. 6mm dia tie,
including cost of form works, concreting, reinforcement, plastering at
top, inscribing on exposed surface, finishing surface, curing, earth
cutting, embedding 450mm below GL., backfilling, ramming etc.
complete as per direction of E-I-C.
RCC-17BCCM: Reinforced cement concrete work with 0.0329 cum 7674.21 252.48
minimum cement content ralates to nominal mix ratio 1:2:4
and maximum water cement ratio 0.45 having minimum
required average strength, f'cr = 24 Mpa a.............4.09.01.02
Minimum 6mm thick cement plaster including neat cement 0.4725 sqm 181.40 85.71
finishing (1:3) …… 4.06.05.01
Earth work in excavation of foundation of structures by 0.0911 cum 124.75 11.36
mechanical (Hydraulic excavator - Long Boom)/ manual
means in all sorts of soil up to specified depth in accordance
with requirements of lines, .............4.05.01.01.01
Supplying and fabrication of Ribbed or deformed bar 4.7015 kg 61.59 289.57
reinforcement conforming to BDS ISO 6935-2:2006 (or
standard subsequently released from BSTI) for all types of
RCC work including straightening, rem.............4.11.01.01
Head Mason 0.0005 day 650.00 0.33
Mason 0.0060 day 550.00 3.30
Skilled Labour 0.0060 day 450.00 2.70
Ordinary Labour 0.1016 day 370.00 37.59
Subtotal-A: 683.04
Misc. Sundry etc. ( +10.00 % on Subtotal-A ) 68.30
Subtotal-A1: 751.34
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 766.37
Note : Rates of all items should be inclusive of all supply and carriage. Page: 272 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
IT 4% of Total 37.47
Total: 936.67
4.01.11.01 Improvement of Waste Disposal Facility for temporary camp site. each
There should be atleast one camp in each site, there should be 1 no of
organic waste and 1 no of inorganic waste disposal facility.
Waste Disposal Facility 1.0000 each 10000.00 10000.00
Subtotal-A: 10000.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 10200.00
Subtotal-A: 2000.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 2040.00
Note : Rates of all items should be inclusive of all supply and carriage. Page: 273 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.01.12.01 Temporary Toilet: There should be 1 camp in each site. In each camp, each
there should be 1 no of toilet for women and 1 no of toilet for men
Temporary Toilet Facility at site 1.0000 each 10000.00 10000.00
Subtotal-A: 10000.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 10200.00
Note : Rates of all items should be inclusive of all supply and carriage. Page: 274 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.02.01.01 For catchment area less then 1.25 sq. Km. each
Digital Topographical Survey & Collection of Hydraulic Data 1.2500 km2 20000.00 25000.00
including equipment & transportation
Subtotal-A: 25000.00
Report Generation and consumables etc. ( +10.00 % on Subtotal-A ) 2500.00
Subtotal-A1: 27500.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 28050.00
4.02.01.02 For catchment area less then 1.25 to 2.50 sq. Km. each
Digital Topographical Survey & Collection of Hydraulic Data 2.5000 km2 20000.00 50000.00
including equipment & transportation
Subtotal-A: 50000.00
Report Generation and consumables etc. ( +10.00 % on Subtotal-A ) 5000.00
Subtotal-A1: 55000.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 56100.00
Note : Rates of all items should be inclusive of all supply and carriage. Page: 275 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.02.01.03 For catchment area beyond then 2.50 sq. Km. each
Digital Topographical Survey & Collection of Hydraulic Data 3.5000 km2 20000.00 70000.00
including equipment & transportation
Subtotal-A: 70000.00
Report Generation and consumables etc. ( +10.00 % on Subtotal-A ) 7000.00
Subtotal-A1: 77000.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 78540.00
4.02.02 Survey and investigation and preparation of Report for bridge approach
road work with chain and compass, auto level, theodolite or total station
including fixing of permanent benchmark and also fixing of bench mark
on all the permanent structures, along the alignment, like boundary
wall, electrical poles etc. Also marking of locations of boundary wall,
electric poles, telephone poles trees etc. in the road boundary, collection
and submission of existing inventory of the road all along the alignment
conducting survey@20 metre interval for L-section and for single lane X-
section interval will be @ 0.75, 1.25, 1.875, 2.60, 3.75, 4.50, 5.50 and
6.50 metre on both side of centre line for double or other lane interval
for x-section shall be as specified by the E-I-C. Data collected as
specified above are required to be submitted in both hard and soft
copies, L-section, X-section and plan is required to be submitted in the
shape of drawing sheets drawn with the help of auto plotter.
Preparation of report complete and submission of the same in five
copies duly spiral binded.
Note : Rates of all items should be inclusive of all supply and carriage. Page: 276 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 15000.00
Report Generation and consumables etc. ( +10.00 % on Subtotal-A ) 1500.00
Subtotal-A1: 16500.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 16830.00
Subtotal-A: 19500.00
Report Generation and consumables etc. ( +10.00 % on Subtotal-A ) 1950.00
Subtotal-A1: 21450.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 21879.00
Note : Rates of all items should be inclusive of all supply and carriage. Page: 277 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 24000.00
Report Generation and consumables etc. ( +10.00 % on Subtotal-A ) 2400.00
Subtotal-A1: 26400.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 26928.00
4.02.03 Sub-soil investigation at the actual locations of each abutment and pier
positions in accordance with the specifications of ASTM D 1586 and D
1587. The bore holes shall have a minimum diameter of 100mm and
shall be lined throughout and shall be minimum 30m to 45m deep or to
a depth as specified in the ASTM/ AASHTO or as directed by the E-I-C
from the existing GL and taking all cautions and steps to collect the
disturbed and undisturbed samples and making the bore holes. The
item is inclusive of mobilization & demobilization, proper method of
borings, arrangement of boat/barge all cost of materials, labourers, field
and laboratory tests including report and records. (The Testing Party
will be selected taking prior approval of Procuring Entity)
4.02.03.03 Test under water for flashy river with flow velocity > 1m/s LS
Note : Rates of all items should be inclusive of all supply and carriage. Page: 278 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 2671.20
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 2724.62
Note : Rates of all items should be inclusive of all supply and carriage. Page: 279 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.03.02 Construction of 0.25m width bamboo sanko with 100mm dia pucca m
borak bamboo posts of required length @2.5m c/c driven at least 1m
below ground level of stream with 75mm dia full bamboo decking
beams, breaching diagonals with 100mm dia bamboo including fitting,
fixing to complete satisfaction including supply of nails, nuts, bolts, etc.
all materials, carrying and labour, etc. all complete as per direction of
the Engineer.
Borak Bamboo (75mm to 100mm) 20.0000 m 42.00 840.00
Nails/ Nut bolts/ Screw/ Spikes 0.5000 kg 65.00 32.50
Skilled Labour 0.2500 day 450.00 112.50
Ordinary Labour 0.5000 day 370.00 185.00
Subtotal-A: 1170.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 1193.40
Note : Rates of all items should be inclusive of all supply and carriage. Page: 280 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 107.51
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 109.66
Note : Rates of all items should be inclusive of all supply and carriage. Page: 281 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 78485.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 80054.70
Subtotal-A: 100835.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 102851.70
Note : Rates of all items should be inclusive of all supply and carriage. Page: 282 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 80415.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 82023.30
Subtotal-A: 72565.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 74016.30
Note : Rates of all items should be inclusive of all supply and carriage. Page: 283 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 87835.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 89591.70
Subtotal-A: 54835.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 55931.70
Note : Rates of all items should be inclusive of all supply and carriage. Page: 284 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.03.05.02 Road Surface: 3.7m HBB pavement over BFS & 150mm ISG LS
4.04.01 Labour charge for erecting and assembling of PSB, fitting, fixing in
proper position and providing necessary decking by arrangement of all
necessary tools and equipment including local handling of bridge parts
and all incidental charges, etc. all complete as per direction of the E-I-C.
Subtotal-A: 3240.84
H.C. of Lunching equipment ( +19.00 % on Subtotal-A ) 615.76
Bullah, Bamboo, Wire, Nylon Rope, Jute, etc. ( +26.00 % on Subtotal-A ) 842.62
Subtotal-A1: 4699.22
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 4793.20
Note : Rates of all items should be inclusive of all supply and carriage. Page: 285 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 3806.04
H.C. of Lunching equipment ( +19.00 % on Subtotal-A ) 723.15
Bullah, Bamboo, Wire, Nylon Rope, Jute, etc. ( +26.00 % on Subtotal-A ) 989.57
Subtotal-A1: 5518.76
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 5629.13
Subtotal-A: 15617.50
H.C. of Lunching equipment ( +19.00 % on Subtotal-A ) 2967.33
Bullah, Bamboo, Wire, Nylon Rope, Jute, etc. ( +26.00 % on Subtotal-A ) 4060.55
Subtotal-A1: 22645.38
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 23098.28
Note : Rates of all items should be inclusive of all supply and carriage. Page: 286 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 12704.60
H.C. of Lunching equipment ( +19.00 % on Subtotal-A ) 2413.87
Bullah, Bamboo, Wire, Nylon Rope, Jute, etc. ( +26.00 % on Subtotal-A ) 3303.20
Subtotal-A1: 18421.67
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 18790.10
Subtotal-A: 18897.50
H.C. of Lunching equipment ( +19.00 % on Subtotal-A ) 3590.53
Bullah, Bamboo, Wire, Nylon Rope, Jute, etc. ( +26.00 % on Subtotal-A ) 4913.35
Subtotal-A1: 27401.38
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 27949.40
Note : Rates of all items should be inclusive of all supply and carriage. Page: 287 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.04.02 Labour charge for delaunching of PSB with all necessary arrangements
including necessary decking by arrangement of all necessary tools and
equipment, all incidental charges, etc. all complete as per direction of
the E-I-C.
Subtotal-A: 2312.30
H.C. of De-lunching Equipment ( +19.00 % on Subtotal-A ) 439.34
Bullah, Bamboo, Wire, Nylon Rope, Jute, etc. ( +26.00 % on Subtotal-A ) 601.20
Subtotal-A1: 3352.84
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 3419.89
Note : Rates of all items should be inclusive of all supply and carriage. Page: 288 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 2775.50
H.C. of De-lunching Equipment ( +19.00 % on Subtotal-A ) 527.35
Bullah, Bamboo, Wire, Nylon Rope, Jute, etc. ( +26.00 % on Subtotal-A ) 721.63
Subtotal-A1: 4024.48
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 4104.96
Subtotal-A: 11424.72
H.C. of De-lunching Equipment ( +19.00 % on Subtotal-A ) 2170.70
Bullah, Bamboo, Wire, Nylon Rope, Jute, etc. ( +26.00 % on Subtotal-A ) 2970.43
Subtotal-A1: 16565.84
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 16897.16
Note : Rates of all items should be inclusive of all supply and carriage. Page: 289 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 9207.70
H.C. of De-lunching equipment ( +19.00 % on Subtotal-A ) 1749.46
Bullah, Bamboo, Wire, Nylon Rope, Jute, etc. ( +26.00 % on Subtotal-A ) 2394.00
Subtotal-A1: 13351.17
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 13618.19
Subtotal-A: 13620.10
H.C. of De-lunching equipment ( +19.00 % on Subtotal-A ) 2587.82
Bullah, Bamboo, Wire, Nylon Rope, Jute, etc. ( +26.00 % on Subtotal-A ) 3541.23
Subtotal-A1: 19749.15
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 20144.13
Note : Rates of all items should be inclusive of all supply and carriage. Page: 290 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Note : Rates of all items should be inclusive of all supply and carriage. Page: 291 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.04.05 Labour for erection of E.I. Rail including hoisting and placing in position m
etc. all complete as per direction of the E/C.
Jute Rope 0.4000 kg 120.00 48.00
Ordinary Labour 0.7500 day 370.00 277.50
Subtotal-A: 325.50
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 332.01
4.04.06 Supplying C.I. Shoe of specified diameter including fitting, fixing etc. all
complete as per direction of the E-I-C.
4.04.06.01 For 300mm dia.: Weight of each shoe should be at least 1.0 cwt each
CI Shoe (300mm dia) 1.0000 each 1650.00 1650.00
Ordinary Labour 0.2500 day 370.00 92.50
Subtotal-A: 1742.50
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 1777.35
Note : Rates of all items should be inclusive of all supply and carriage. Page: 292 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.04.06.02 For 600mm dia.: Weight of each shoe should be at least 2.0 cwt each
CI Shoe (600mm dia) 1.0000 each 5200.00 5200.00
Ordinary Labour 0.3000 day 370.00 111.00
Subtotal-A: 5311.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 5417.22
4.04.06.03 For 750mm dia.: Weight of each shoe should be atleast 3.0 cwt each
CI Shoe (750mm dia) 1.0000 each 6750.00 6750.00
Ordinary Labour 0.4500 day 370.00 166.50
Subtotal-A: 6916.50
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 7054.83
4.04.07 Supplying C.I. Cap of standard size to fit on single/ double E.I. Rail, with
necessary fittings etc. all complete as per direction of the E-I-C.
Note : Rates of all items should be inclusive of all supply and carriage. Page: 293 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 1742.50
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 1777.35
Subtotal-A: 2004.50
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 2044.59
4.04.08 Labour for taking out E.I. Rail post with specified diameter C.I. shoe (
Portion embedded within earth only will be paid ) etc. all complete as
per direction of the E/C.
Note : Rates of all items should be inclusive of all supply and carriage. Page: 294 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 370.00
Necessary arrangement ( +15.00 % on Subtotal-A ) 55.50
Subtotal-A1: 425.50
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 434.01
Subtotal-A: 555.00
Necessary arrangement ( +20.00 % on Subtotal-A ) 111.00
Subtotal-A1: 666.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 679.32
4.04.09 Labour for driving E.I. Rail post with specified diameter C.I. shoe with
all driving arrangements ( only under ground portion with shoe will be
considered for measurement) etc. all complete as per direction of the E-
I-C.
Note : Rates of all items should be inclusive of all supply and carriage. Page: 295 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 510.60
Necessary arrangement ( +18.00 % on Subtotal-A ) 91.91
Subtotal-A1: 602.51
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 614.56
Subtotal-A: 610.50
Necessary arrangement ( +22.00 % on Subtotal-A ) 134.31
Subtotal-A1: 744.81
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 759.71
Note : Rates of all items should be inclusive of all supply and carriage. Page: 296 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 2783.00
All other cost including priming ( +2.00 % on Subtotal-A ) 55.66
Subtotal-A1: 2838.66
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 2895.43
4.04.11 Supplying RS joist of different sizes at site to construct iron bridge in/c kg
fitting, fixing etc. all complete as per direction of E-I-C.
RS Joist 1.0000 kg 75.00 75.00
Skilled Labour 0.0100 day 450.00 4.50
Subtotal-A: 79.50
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 81.09
Note : Rates of all items should be inclusive of all supply and carriage. Page: 297 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.04.12 Labour for utilizing RS joist of different sizes of necessary fitting, fixing, kg
drilling hole etc. all complete as per direction of the E-I-C.
Skilled Labour 0.0200 day 450.00 9.00
Subtotal-A: 9.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 9.18
4.04.13 Supplying utilizing MS Angle, flat bar of different sizes or section in/c kg
fitting, fixing etc. all complete as per direction if E-I-C.
MS Angle, Flat bar, Z bar 1.0000 kg 59.00 59.00
Skilled Labour 0.0250 day 450.00 11.25
Subtotal-A: 70.25
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 71.66
Note : Rates of all items should be inclusive of all supply and carriage. Page: 298 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.05.01.01 Earth work in Ordinary Soil by Manual Means for an initial lead up to
30m
Subtotal-A: 124.75
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 127.25
Note : Rates of all items should be inclusive of all supply and carriage. Page: 299 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 143.25
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 146.12
Subtotal-A: 235.75
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 240.47
Note : Rates of all items should be inclusive of all supply and carriage. Page: 300 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 66.84
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 68.18
Note : Rates of all items should be inclusive of all supply and carriage. Page: 301 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 74.74
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 76.23
Note : Rates of all items should be inclusive of all supply and carriage. Page: 302 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 84.72
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 86.41
4.05.01.03 Earth work in Rocky, gravelly, slushy or organic type Soil by Manual
Means for an initial lead of 30m
Note : Rates of all items should be inclusive of all supply and carriage. Page: 303 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 161.75
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 164.99
Subtotal-A: 217.25
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 221.60
Note : Rates of all items should be inclusive of all supply and carriage. Page: 304 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 254.25
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 259.34
4.05.01.04 Earth work Rocky, gravelly, slushy or organic type Soil by Mechanical
Means (Hydaulic Excavator) for an initial lead of 30m
Note : Rates of all items should be inclusive of all supply and carriage. Page: 305 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 73.51
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 74.98
Note : Rates of all items should be inclusive of all supply and carriage. Page: 306 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 82.88
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 84.54
Note : Rates of all items should be inclusive of all supply and carriage. Page: 307 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 94.51
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 96.40
4.05.02 Disposing surplus excavated soils of all types outside the site premises
up to a lead of specified distance including cost of labour, cost of
equipment and machinery, loading and unloading at both ends,
transportation, all other incidental charges at all leads and lifts etc.
complete as per approval of the E-I-C. The surplus excavated material
must be dumped in an unobjectionable place outside the site premises
with minimum traffic disruption and the procuring entity will not be
responsible for any irregularities by the party regarding disposing of the
earth.
Note : Rates of all items should be inclusive of all supply and carriage. Page: 308 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 36.72
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 37.45
Subtotal-A: 40.32
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 41.12
Note : Rates of all items should be inclusive of all supply and carriage. Page: 309 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 47.52
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 48.47
Subtotal-A: 54.72
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 55.81
Note : Rates of all items should be inclusive of all supply and carriage. Page: 310 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 61.92
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 63.16
Subtotal-A: 69.12
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 70.50
Note : Rates of all items should be inclusive of all supply and carriage. Page: 311 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 76.32
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 77.84
4.05.03 P&B: Pumping and bailing out water from the interior of any foundation LS
enclosure of work site with all leads and lifts including supply, operation
and maintenance of requisite number of water pumps, arrangements for
protection of ringh bund and side slopes of foundation pit against
erosion or washout etc. It should be carried out in such a manner as to
preclude the possibility of the movement of water through or alongside
any concrete being placed, etc. all complete as per direction of E-I-C.
No pumping or bailing will be permitted during the placing of concrete.
4.05.04 RB: Making earthen ring/ cross bundh of required height and width to LS
prevent water from entering in the working area for any type of
foundation with earth arranged and carried by the contractor including
bullah/bamboo palisading and double tarja mat/drum sheets walling as
and where necessary, maintaining the same throughout the working
period, filling by throwing earth in layers, removal of structure totally on
completion of the bridge, etc. all complete as per requirement and
instruction of the E-I-C.
Note : Rates of all items should be inclusive of all supply and carriage. Page: 312 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 111332.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 113558.64
Note : Rates of all items should be inclusive of all supply and carriage. Page: 313 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 122387.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 124834.74
Note : Rates of all items should be inclusive of all supply and carriage. Page: 314 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 123702.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 126176.04
Note : Rates of all items should be inclusive of all supply and carriage. Page: 315 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 129778.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 132373.56
Note : Rates of all items should be inclusive of all supply and carriage. Page: 316 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 132402.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 135050.04
Note : Rates of all items should be inclusive of all supply and carriage. Page: 317 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 133709.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 136383.18
Note : Rates of all items should be inclusive of all supply and carriage. Page: 318 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 134589.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 137280.78
Note : Rates of all items should be inclusive of all supply and carriage. Page: 319 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 135896.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 138613.92
4.05.05.02 Extra for each additional 300mm above 1500mm and upto 3000mm
depth of water
4.05.05.02.01 For 3000mm x 6000mm wells each Add +8.00% with Item No 4.05.05.01.01
4.05.05.02.02 For 3000mm x 7200mm wells each Add +14.00% with Item No 4.05.05.01.02
4.05.05.02.03 For 3600mm x 7200mm wells each Add +15.00% with Item No 4.05.05.01.03
4.05.05.02.04 For 3000mm x 8100mm wells each Add +15.00% with Item No 4.05.05.01.04
4.05.05.02.05 For 3600mm x 8100mm wells each Add +15.00% with Item No 4.05.05.01.05
4.05.05.02.06 For 3300mm x 8400mm wells each Add +15.00% with Item No 4.05.05.01.06
4.05.05.02.07 For 3900mm x 7800mm wells each Add +15.00% with Item No 4.05.05.01.07
Note : Rates of all items should be inclusive of all supply and carriage. Page: 320 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.05.05.02.08 For 4800mm x 7800mm wells each Add +16.00% with Item No 4.05.05.01.08
4.05.05.03 Extra for each additional 300mm above 3000mm and up to 4500mm
depth of water
4.05.05.03.01 For 3000mm x 6000mm wells each Add +16.00% with Item No 4.05.05.01.01
4.05.05.03.02 For 3000mm x 7200mm wells each Add +17.00% with Item No 4.05.05.01.02
4.05.05.03.03 For 3600mm x 7200mm wells each Add +18.00% with Item No 4.05.05.01.03
4.05.05.03.04 For 3000mm x 8100mm wells each Add +18.00% with Item No 4.05.05.01.04
4.05.05.03.05 For 3600mm x 8100mm wells each Add +19.00% with Item No 4.05.05.01.05
4.05.06 Making temporary artificial island in river/ channel required for cast-in-
situ bored pile with supplying and driving bamboo posts of 75 to
100mm diameter at specified spacing up to required depth with nails,
driving additional gazari/ shalbullah posts of 150 to 175mm diameter at
specified spacing up to required depth & half split bullah bracing at top
level for longer depth, dram sheet walling & internal cross tie by re-bar
with specified diameter & spacing and all other necessary iron fitting,
earth arrangement and carried by contractor by any means including
cost of all materials required for the work and maintaining the same till
the completion of the work for which the island is made. The structures
are to be completely removed on completion of the work and the cost is
inclusive of this element also.
4.05.06.01 For depth up to 2.0m: Spacing of bamboo posts: 250mm c/c, internal
cross ties: 12mm dia re-bar @ 2m c/c
Note : Rates of all items should be inclusive of all supply and carriage. Page: 321 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 123562.85
Lobour charge for removal of island ( +3.00 % on Subtotal-A ) 3706.89
Subtotal-A1: 127269.74
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 129815.13
4.05.06.01.02 Size of Island: 11m x 18m each Add +12.00% with Item No 4.05.06.01.01
4.05.06.01.03 Size of Island: 11m x 20m each Add +21.00% with Item No 4.05.06.01.01
4.05.06.02 For depth above 2.0m: Spacing of bamboo post: close hole, spacing of
Gazari/ Shalbullah posts: 1m c/c, internal cross ties: 16mm dia. re-bar
at alternate bullah post.
Note : Rates of all items should be inclusive of all supply and carriage. Page: 322 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 364910.40
Labour Charge for removal of Island ( +10.00 % on Subtotal-A ) 36491.04
Subtotal-A1: 401401.44
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 409429.47
4.05.06.02.02 Size of Island: 11m x 18m each Add +12.00% with Item No 4.05.06.02.01
4.05.06.02.03 Size of Island: 11m x 20m each Add +21.00% with Item No 4.05.06.02.01
Note : Rates of all items should be inclusive of all supply and carriage. Page: 323 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.05.07.01 Size: 26.0m x 8.5m, Loaded Draft: 1.8m/1.2m, Carrying capacity: 150 each/
Ton month
H.C. of Barge (Size: 26.0m x 8.5m, Loaded Draft: 30.0000 day 6500.00 195000.00
1.8m/1.2m, Carrying capacity: 150 Ton) including
mobilization, demobilization and shifting at site
Subtotal-A: 195000.00
Mobilization and demobilization etc. ( +15.00 % on Subtotal-A ) 29250.00
Subtotal-A1: 224250.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 228735.00
Note : Rates of all items should be inclusive of all supply and carriage. Page: 324 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.05.07.02 Size: 30.0m x 9.0m, Loaded Draft: 1.8m/1.2m, Carrying capacity: 200 each/
Ton month
H.C. of Barge (Size: 30.0m x 9.0m, Loaded Draft: 30.0000 day 9000.00 270000.00
1.8m/1.2m, Carrying capacity: 200 Ton) including
mobilization, demobilization and shifting at site
Subtotal-A: 270000.00
Mobilization and demobilization etc. ( +15.00 % on Subtotal-A ) 40500.00
Subtotal-A1: 310500.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 316710.00
4.05.07.03 Size: 38.0m x 9.0m, Loaded Draft: 2.0m/1.37m, Carrying capacity: 300 each/
Ton month
H.C. of Barge (Size: 38.0m x 9.0m, Loaded Draft: 30.0000 day 10500.00 315000.00
2.0m/1.37m, Carrying capacity: 300 Ton) including
mobilization, demobilization and shifting at site
Subtotal-A: 315000.00
Mobilization and demobilization etc. ( +15.00 % on Subtotal-A ) 47250.00
Subtotal-A1: 362250.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 369495.00
Note : Rates of all items should be inclusive of all supply and carriage. Page: 325 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.05.07.04 Size: 36.5m x 12.0m, Loaded Draft: 2.4m/1.8m, Carrying capacity: 400 each/
Ton month
H.C. of Barge (Size: 36.5m x 12.0m, Loaded Draft: 30.0000 day 14000.00 420000.00
2.4m/1.8m, Carrying capacity: 400 Ton) including
mobilization, demobilization and shifting at site
Subtotal-A: 420000.00
Mobilization and demobilization etc. ( +15.00 % on Subtotal-A ) 63000.00
Subtotal-A1: 483000.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 492660.00
4.05.07.05 Size: 38.0m x 13.5m, Loaded Draft: 2.4m/1.8m, Carrying capacity: 500 each/
Ton month
H.C. of Barge (Size: 38.0m x 13.5m, Loaded Draft: 30.0000 day 16500.00 495000.00
2.4m/1.8m, Carrying capacity: 500 Ton) including
mobilization, demobilization and shifting at site
Subtotal-A: 495000.00
Mobilization and demobilization etc. ( +15.00 % on Subtotal-A ) 74250.00
Subtotal-A1: 569250.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 580635.00
Note : Rates of all items should be inclusive of all supply and carriage. Page: 326 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Note : Rates of all items should be inclusive of all supply and carriage. Page: 327 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 5683.00
H.C for Double Headed EI Rail, RS Joist, MS ( +63.00 % on Subtotal-A ) 3580.29
Double Angle, CI Shoe,CI Cap, Nut bolts, MS
Plate, Electrode etc all other elements whice is
required
Subtotal-A1: 9263.29
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 9448.56
Note : Rates of all items should be inclusive of all supply and carriage. Page: 328 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 6141.90
H.C for Double Headed EI Rail, RS Joist, MS ( +74.00 % on Subtotal-A ) 4545.01
Double Angle, CI Shoe,CI Cap, Nut bolts, MS
Plate, Electrode etc all other elements whice is
required
Subtotal-A1: 10686.91
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 10900.64
Note : Rates of all items should be inclusive of all supply and carriage. Page: 329 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 6399.90
H.C for Double Headed EI Rail, RS Joist, MS ( +77.00 % on Subtotal-A ) 4927.92
Double Angle, CI Shoe,CI Cap, Nut bolts, MS
Plate, Electrode etc all other elements whice is
required
Subtotal-A1: 11327.82
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 11554.38
Note : Rates of all items should be inclusive of all supply and carriage. Page: 330 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 6654.20
H.C for Double Headed EI Rail, RS Joist, MS ( +80.00 % on Subtotal-A ) 5323.36
Double Angle, CI Shoe,CI Cap, Nut bolts, MS
Plate, Electrode etc all other elements whice is
required
Subtotal-A1: 11977.56
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 12217.11
Note : Rates of all items should be inclusive of all supply and carriage. Page: 331 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 6912.20
H.C for Double Headed EI Rail, RS Joist, MS ( +83.00 % on Subtotal-A ) 5737.13
Double Angle, CI Shoe,CI Cap, Nut bolts, MS
Plate, Electrode etc all other elements whice is
required
Subtotal-A1: 12649.33
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 12902.31
Note : Rates of all items should be inclusive of all supply and carriage. Page: 332 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Note : Rates of all items should be inclusive of all supply and carriage. Page: 333 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 93794.19
All other Cost including mobilization & ( +3.00 % on Subtotal-A ) 2813.83
Note : Rates of all items should be inclusive of all supply and carriage. Page: 334 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
demobilization of equipment
Subtotal-A1: 96608.02
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 98540.18
4.05.09.02 For depth 5m to 6m from LWL sqm Add +10.00% with Item No 4.05.09.01
4.05.09.03 For depth 6m to 7m from LWL sqm Add +20.00% with Item No 4.05.09.01
4.05.09.04 For depth 7m to 8m from LWL sqm Add +30.00% with Item No 4.05.09.01
4.05.09.05 For depth 8m to 9m from LWL sqm Add +40.00% with Item No 4.05.09.01
4.05.09.06 For depth 9m to 10m from LWL sqm Add +50.00% with Item No 4.05.09.01
4.05.09.07 For depth above 10m from LWL sqm Add +60.00% with Item No 4.05.09.01
Note : Rates of all items should be inclusive of all supply and carriage. Page: 335 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Note : Rates of all items should be inclusive of all supply and carriage. Page: 336 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 5021.30
All other Cost including mobilization & ( +3.00 % on Subtotal-A ) 150.64
demobilization of equipment, regular maintenance
of Generator & submersible pumps etc.
Subtotal-A1: 5171.94
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 5275.37
Note : Rates of all items should be inclusive of all supply and carriage. Page: 337 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 15338.48
All other Cost including mobilization & ( +3.00 % on Subtotal-A ) 460.15
demobilization of equipment, regular maintenance
of Generator & submersible pumps etc.
Subtotal-A1: 15798.64
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 16114.61
Note : Rates of all items should be inclusive of all supply and carriage. Page: 338 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 38216.95
All other Cost including mobilization & ( +3.00 % on Subtotal-A ) 1146.51
demobilization of equipment, regular maintenance
of Generator & submersible pumps etc.
Subtotal-A1: 39363.46
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 40150.73
4.05.10.04 Dewatering system for depth above 9m sqm Add +25.00% with Item No 4.05.10.03
Note : Rates of all items should be inclusive of all supply and carriage. Page: 339 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.06.01 Sand filling on the prepared foundation bed with sand of specified FM in
layers not more than 150mm thick including necessary carriage,
leveling, watering and ramming to achieve minimum dry density (MDD)
of 95% STD compaction with optimum moisture content (OMC) by
ramming each layer up to finished level as per direction of E-I-C.
Subtotal-A: 687.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 700.74
Subtotal-A: 811.80
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 828.04
Note : Rates of all items should be inclusive of all supply and carriage. Page: 340 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 1275.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 1300.50
Subtotal-A: 1911.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 1949.22
Note : Rates of all items should be inclusive of all supply and carriage. Page: 341 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.06.02 Single layer brick flat soling with 1st class or picked kiln burnt bricks in sqm
foundation, filling the interstices tightly with sand of minimum FM 0.50,
watering, leveling, dressing, etc. all complete as per instruction of the E-
I-C.
1st Class Brick 31.0000 each 9.00 279.00
Sand (FM - 0.5) 0.0120 m3 420.00 5.04
Mason 0.0250 day 550.00 13.75
Ordinary Labour 0.1000 day 370.00 37.00
Subtotal-A: 334.79
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 341.49
Note : Rates of all items should be inclusive of all supply and carriage. Page: 342 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.06.03 PCC-10: Plain cement concrete work in foundation with minimum cum
compressive strength of 10 MPa at 28 days (sugessted mix proportion
1:3:6) on standard cylinder as per standard practice of Code AASHTO/
ASTM and cement conforming to BDS EN 197-1 : 2003 CEM-II/A-
L/M/V/W 42.5N, sand of minimum FM 1.8 and 20mm down well graded
1st class/ picked brick chips (LAA value not exceeding 40) comforming
to ASTM C 33 including breaking bricks into chips, shuttering, mixing by
concrete mixer machine, casting, laying compacting and curing for the
requisite period etc. all complete as per direction of the E-I-C.
Additional quantity of cement to be added if required to attain the
strength at the contractor's own cost.
Portland Composite Cement (CEM-II/A-L/M/V/W 42.5N) 4.2400 bag 430.00 1823.20
1st Class Brick Chips (20mm down graded) 0.9000 m3 2940.00 2646.00
Sand (FM - 1.8) 0.4500 m3 970.00 436.50
Head Mason 0.0800 day 650.00 52.00
Mason 0.4200 day 550.00 231.00
Skilled Labour 0.7500 day 450.00 337.50
Ordinary Labour 1.8000 day 370.00 666.00
H.C. of Concrete Mixture Machine (Capacity 0.40/ 0.28 cum) 0.0600 day 1200.00 72.00
Hire and running charges of Concrete Vibrator 0.0600 day 400.00 24.00
Subtotal-A: 6288.20
Loading & Unloading and other costs ( +.50 % on Subtotal-A ) 31.44
Subtotal-A1: 6319.64
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 6446.03
Note : Rates of all items should be inclusive of all supply and carriage. Page: 343 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.06.04 PCC-17: Plain cement concrete work in foundation with minimum cum
compressive strength of 17 MPa at 28 days (sugessted mix proportion
1:2:4 & maximum w/c ratio 0.45) on standard cylinder as per standard
practice of Code AASHTO/ ASTM/ and cement conforming to BDS EN
197-1 : 2003 CEM-II/A-L/M/V/W 42.5N, sand of minimum FM 1.8 and
20mm down well graded 1st class/ picked brick chips (LAA value not
exceeding 40) comforming to ASTM C 33 including breaking bricks into
chips, shuttering, mixing by concrete mixer machine, casting, laying
compacting and curing for the requisite period etc. all complete as per
direction of the E-I-C. Additional quantity of cement to be added if
required to attain the strength at the contractor's own cost.
Portland Composite Cement (CEM-II/A-L/M/V/W 42.5N) 6.0500 bag 430.00 2601.50
1st Class Brick Chips (20mm down graded) 0.8600 m3 2940.00 2528.40
Sand (FM - 1.8) 0.4300 m3 970.00 417.10
Head Mason 0.0800 day 650.00 52.00
Mason 0.4200 day 550.00 231.00
Skilled Labour 0.7500 day 450.00 337.50
Ordinary Labour 1.8000 day 370.00 666.00
H.C. of Concrete Mixture Machine (Capacity 0.40/ 0.28 cum) 0.0600 day 1200.00 72.00
Hire and running charges of Concrete Vibrator 0.0600 day 400.00 24.00
Subtotal-A: 6929.50
Loading & Unloading and other costs ( +.50 % on Subtotal-A ) 34.65
Subtotal-A1: 6964.15
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 7103.43
Note : Rates of all items should be inclusive of all supply and carriage. Page: 344 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.06.05 Brick work with 1st class brick in specified cement mortar in foundation
with sand of minimum FM 1.20 and cement conforming to BDS EN 197-
1 : 2003 CEM-II/A-L/M/V/W 42.5N, filling the interstices tightly with
mortar, raking out joints, cleaning and soaking bricks at least for 24
hours before use, washing of sand, curing at least for 7 days etc. all
complete as per design, specification & direction of the E-I-C.
Subtotal-A: 6203.04
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 6327.10
Note : Rates of all items should be inclusive of all supply and carriage. Page: 345 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 5849.80
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 5966.80
Note : Rates of all items should be inclusive of all supply and carriage. Page: 346 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 5529.98
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 5640.58
4.06.06 Minimum 6mm thick cement plaster including neat cement finishing over
concrete faces with sand of minimum FM 1.20 and cement conforming
to BDS EN 197-1 : 2003 CEM-II/A-L/M/V/W 42.5N including washing of
sand, cleaning junctiongs of concrete, grouting, dabbing, doing
independent double-legged scaffolding, finishing the edges and corners,
cleaning of surfaces and curing for requisite period etc. all complete at
all leads & lifts as per drawings, specification & direction of the E-I-C.
Note : Rates of all items should be inclusive of all supply and carriage. Page: 347 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 164.91
Other consumables etc. ( +10.00 % on Subtotal-A ) 16.49
Subtotal-A1: 181.40
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 185.02
Note : Rates of all items should be inclusive of all supply and carriage. Page: 348 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 157.25
Other consumables etc. ( +10.00 % on Subtotal-A ) 15.73
Subtotal-A1: 172.98
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 176.44
Note : Rates of all items should be inclusive of all supply and carriage. Page: 349 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.07.01 BCIS: Boring for cast-in-situ piles up to the required depth and specified
diameter with driving temporary steel casing (shall be 8mm thick with
necessary stiffener bands and sharp edge at bottom and provided up to
non-collapsible strata from the existing ground level but not less then
4.0 m) in all types of soils including min. 2-chamber slurry tank, drilling
with bentonite circulation (Dry Bentonite powder of liquid limit of
minimum 350 shall be mixed with water @ minimum 4% by weight to
make the fresh drilling fluid of viscosity between 32-50 seconds and
density less than 1.1gm/cc), maintaining fluid level inside casing at all
time at least 2 m higher than outside the casings, washing bore hole by
air lift cleanup method with fresh bentonite slurry until the slurry from
bore hole bottom have density less than 1.15gm/cc and sand content is
less than 4%, make the bore hole ready for concreting including
disposal/removal of all bored material, hire charge of mechanical winch
machine/ skid mounted mechanical table drive rotary/ hydraulic rotary
boring equipment, derrick, trimie pipe, cost of fuel, lubricant,
mobilization, demobilization, spares, insurance coverage, water,
electricity and other charges all complete as per design, drawing,
specification and direction of E-I-C. Contractor shall submit the
methodology of cast-in-situ pile work including information on boring
equipment, sequence of boring & casting, quality control, disposal of
spoils, test result of materials to the E-I-C for approval before
commencing any boring operation. Boring and excavation for a pile shall
not commence until 24 hours after completion of any pile within radius
of 6 meters c/c. Cost of collecting, conveying, loading, transportation of
spoils/mud accumulated during boring of cast-in-situ pile with all lifts
and lead is included in this unit rate. The spoils must be dumped in an
unobjectionable place outside the site premises with minimum traffic
disruption and the procuring entity will not be responsible for any
irregularities by the party regarding dumping of the spoils.
Note: Boring method shall be selected as per instruction given in the
drawing.
Note : Rates of all items should be inclusive of all supply and carriage. Page: 350 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 971.00
Bentonite mixing & circulation from slurry Tank ( +10.00 % on Subtotal-A ) 97.10
Subtotal-A1: 1068.10
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 1089.46
Note : Rates of all items should be inclusive of all supply and carriage. Page: 351 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 1190.88
Bentonite mixing & circulation from slurry Tank ( +10.00 % on Subtotal-A ) 119.09
Subtotal-A1: 1309.96
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 1336.16
Note : Rates of all items should be inclusive of all supply and carriage. Page: 352 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 1434.25
Bentonite mixing & circulation from slurry Tank ( +10.00 % on Subtotal-A ) 143.43
Subtotal-A1: 1577.68
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 1609.23
Note : Rates of all items should be inclusive of all supply and carriage. Page: 353 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 1686.25
Bentonite mixing & circulation from slurry Tank ( +10.00 % on Subtotal-A ) 168.63
Subtotal-A1: 1854.88
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 1891.97
Note : Rates of all items should be inclusive of all supply and carriage. Page: 354 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 1886.00
Bentonite mixing & circulation from slurry Tank ( +10.00 % on Subtotal-A ) 188.60
Subtotal-A1: 2074.60
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 2116.09
Note : Rates of all items should be inclusive of all supply and carriage. Page: 355 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Note : Rates of all items should be inclusive of all supply and carriage. Page: 356 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 2272.68
Bentonite mixing & circulation from slurry Tank ( +10.00 % on Subtotal-A ) 227.27
Subtotal-A1: 2499.94
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 2549.94
Note : Rates of all items should be inclusive of all supply and carriage. Page: 357 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 2803.90
Bentonite mixing & circulation from slurry Tank ( +10.00 % on Subtotal-A ) 280.39
Subtotal-A1: 3084.29
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 3145.98
Note : Rates of all items should be inclusive of all supply and carriage. Page: 358 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 3601.55
Bentonite mixing & circulation from slurry Tank ( +10.00 % on Subtotal-A ) 360.16
Subtotal-A1: 3961.71
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 4040.94
Note : Rates of all items should be inclusive of all supply and carriage. Page: 359 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 4254.03
Bentonite mixing & circulation from slurry Tank ( +10.00 % on Subtotal-A ) 425.40
Subtotal-A1: 4679.43
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 4773.02
Note : Rates of all items should be inclusive of all supply and carriage. Page: 360 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Note : Rates of all items should be inclusive of all supply and carriage. Page: 361 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 3066.58
Bentonite mixing & circulation from slurry Tank ( +10.00 % on Subtotal-A ) 306.66
Subtotal-A1: 3373.23
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 3440.70
Note : Rates of all items should be inclusive of all supply and carriage. Page: 362 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 3749.10
Bentonite mixing & circulation from slurry Tank ( +10.00 % on Subtotal-A ) 374.91
Subtotal-A1: 4124.01
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 4206.49
Note : Rates of all items should be inclusive of all supply and carriage. Page: 363 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 4774.55
Bentonite mixing & circulation from slurry Tank ( +10.00 % on Subtotal-A ) 477.46
Subtotal-A1: 5252.01
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 5357.05
Note : Rates of all items should be inclusive of all supply and carriage. Page: 364 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 5518.83
Bentonite mixing & circulation from slurry Tank ( +10.00 % on Subtotal-A ) 551.88
Subtotal-A1: 6070.71
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 6192.12
Note : Rates of all items should be inclusive of all supply and carriage. Page: 365 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 6644.39
Bentonite mixing & circulation from slurry Tank ( +10.00 % on Subtotal-A ) 664.44
Subtotal-A1: 7308.83
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 7455.01
Note : Rates of all items should be inclusive of all supply and carriage. Page: 366 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 7923.74
Bentonite mixing & circulation from slurry Tank ( +10.00 % on Subtotal-A ) 792.37
Subtotal-A1: 8716.11
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 8890.43
Note : Rates of all items should be inclusive of all supply and carriage. Page: 367 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 8718.58
Bentonite mixing & circulation from slurry Tank ( +10.00 % on Subtotal-A ) 871.86
Subtotal-A1: 9590.44
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 9782.25
Note : Rates of all items should be inclusive of all supply and carriage. Page: 368 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 9959.19
Bentonite mixing & circulation from slurry Tank ( +10.00 % on Subtotal-A ) 995.92
Subtotal-A1: 10955.11
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 11174.21
Note : Rates of all items should be inclusive of all supply and carriage. Page: 369 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.07.02 DCIS: Driven Cast-in-Situ vertical R.C.C. pile of specified diameter and
length (length to be measured from the bottom of pile cap to the
bottom of shoe), to carry safe working load not less than specified,
including cost shoe & all other materials and labour for casting, hoisting,
driving etc. and also including cost of dummy lengths of pile and of hire
charges of all instruments as necessary but excluding concrete &
reinforcement etc. all complete as per drawing, specification and
direction of Engineer-in-Charge.
Subtotal-A: 1612.03
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 1644.27
Note : Rates of all items should be inclusive of all supply and carriage. Page: 370 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 1732.03
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 1766.67
Note : Rates of all items should be inclusive of all supply and carriage. Page: 371 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 1852.03
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 1889.07
Note : Rates of all items should be inclusive of all supply and carriage. Page: 372 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 2796.24
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 2852.16
Note : Rates of all items should be inclusive of all supply and carriage. Page: 373 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 3195.41
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 3259.32
Note : Rates of all items should be inclusive of all supply and carriage. Page: 374 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 3444.98
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 3513.88
Note : Rates of all items should be inclusive of all supply and carriage. Page: 375 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 4118.62
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 4200.99
Note : Rates of all items should be inclusive of all supply and carriage. Page: 376 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 4541.84
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 4632.67
Note : Rates of all items should be inclusive of all supply and carriage. Page: 377 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 5066.18
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 5167.50
Note : Rates of all items should be inclusive of all supply and carriage. Page: 378 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.07.03 RCC-25SCCM: Reinforced cement concrete work for cast-in-situ pile with cum
minimum cement content relates to mix ratio 1:1.5:3 and maximum
water cement ratio 0.4 having minimum required average compressive
strength, f'cr = 33.5 MPa and satisfying a compressive strength f'c = 25
MPa at 28 days on standard cylinders as per standard practice of code
AASHTO/ ASTM and cement conforming to BDS EN 197-1 : 2003 CEM-
II/A-L/M/V/W 42.5N, high range water reducing admixture of complying
type A or F under ASTM C 494 (Doses of admixture to be fixed by the
mix design), sand of minimum FM 2.5 and 20mm down well graded
crushed stone chips broken from boulders (Preferably stone chips from
Madhyapara, Dinajpur, LAA value not exceeding 30) conforming to
ASTM C 33, including breaking chips, screening through proper sieves,
placing & maintaining re-bar cage in position, jointing longitudinal bars
by welding or re-bar coupling method, placing and removing tripod/
derrick as per requirement, mixing in standard mixture machine with
hoper, maintaining allowable slump of 150mm to 200mm, placing a
sliding plug or barrier to prevent direct contact between the first charge
of concrete in the pipe of the tremie and the water of drilling fluid,
pouring the concrete in bore hole with the help of trimie pipe,
maintaining the trimie pipe immersed in concrete by at least 1.5m
throughout the period of concreting etc. including cost of all materials,
labour, equipment and all incidental charges but excluding the cost of
reinforcement and its fabrication, welding, coupling and placing etc. all
complete as per design, drawing, specifications and direction of the E-I-
C. The contractor shall maintain a continuous record of the volume of
concrete used and the level of the concrete in the pipe. Any deviations
from the theoretical, or expected, volume/ level relationship shall be
immediately reported to the E-I-C. Additional quantity of cement to be
added if required to attain the specified strength to be provided by the
contractor at his own cost.
Note: Using Concrete Mixer
Portland Composite Cement (CEM-II/A-L/M/V/W 42.5N) 7.7100 bag 430.00 3315.30
Stone Chips (20mm down graded) [LAA≤30] 0.4900 m3 5320.00 2606.80
Stone Chips (12mm down graded) [LAA≤30] 0.3300 m3 4470.00 1475.10
Sand (FM - 2.5) 0.4100 m3 1500.00 615.00
Water-reducing high range chemical admixture : Type-F 3.8550 liter 160.00 616.80
Foreman 0.1240 day 800.00 99.20
Note : Rates of all items should be inclusive of all supply and carriage. Page: 379 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 10182.62
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 10386.27
Note : Rates of all items should be inclusive of all supply and carriage. Page: 380 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.07.04 RCC-25SCBP: Reinforced cement concrete work for cast-in-situ pile with cum
minimum cement content relates to mix ratio 1:1.5:3 and maximum
water cement ratio 0.4 having minimum required average compressive
strength, f'cr = 33.5 MPa and satisfying a compressive strength f'c = 25
MPa at 28 days on standard cylinders as per standard practice of code
AASHTO/ ASTM and cement conforming to BDS EN 197-1 : 2003 CEM-
II/A-L/M/V/W 42.5N, high range water reducing admixture of complying
type A or F under ASTM C 494 (Doses of admixture to be fixed by the
mix design), sand of minimum FM 2.5 and 20mm down well graded
crushed stone chips broken from boulders (Preferably stone chips from
Madhyapara, Dinajpur, LAA value not exceeding 30) conforming to
ASTM C 33, including breaking chips, screening through proper sieves,
placing & maintaining re-bar cage in position, jointing longitudinal bars
by welding or re-bar coupling method, placing and removing tripod/
derrick as per requirement, mixing in mechanized batch mix plant &
pumping using line pump or boom placer, maintaining allowable slump
of 150mm to 200mm, placing a sliding plug or barrier to prevent direct
contact between the first charge of concrete in the pipe of the tremie
and the water of drilling fluid, pouring the concrete in bore hole with the
help of trimie pipe, maintaining the trimie pipe immersed in concrete by
at least 1.5m throughout the period of concreting etc. including cost of
all materials, labour, equipment and all incidental charges but excluding
the cost of reinforcement and its fabrication, welding, coupling and
placing etc. all complete as per design, drawing, specifications and
direction of the E-I-C. The contractor shall maintain a continuous record
of the volume of concrete used and the level of the concrete in the pipe.
Any deviations from the theoretical, or expected, volume/ level
relationship shall be immediately reported to the E-I-C. Additional
quantity of cement to be added if required to attain the specified
strength to be provided by the contractor at his own cost.
Note: Using Batching Plant, Transit Mixer & Concrete Pump
Portland Composite Cement (CEM-II/A-L/M/V/W 42.5N) 7.7100 bag 430.00 3315.30
Stone Chips (20mm down graded) [LAA≤30] 0.4900 m3 5320.00 2606.80
Stone Chips (12mm down graded) [LAA≤30] 0.3300 m3 4470.00 1475.10
Sand (FM - 2.5) 0.4100 m3 1500.00 615.00
Water-reducing high range chemical admixture : Type-F 3.8550 liter 160.00 616.80
Foreman 0.1240 day 800.00 99.20
Note : Rates of all items should be inclusive of all supply and carriage. Page: 381 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 10170.27
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 10373.68
Note : Rates of all items should be inclusive of all supply and carriage. Page: 382 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.07.05 RCC-30SCBP: Reinforced cement concrete work for cast-in-situ pile with cum
minimum cement content and maximum water cement ratio as specified
by the laboratory having minimum required average compressive
strength, f'cr = 38.5 MPa and satisfying a specified compressive
strength, f'c = 30 MPa at 28 days on standard cylinder as per standard
practice of Code AASHTO/ ASTM and cement conforming to BDS EN
197-1 : 2003 CEM-I 52.5N / ASTM C150 Type-1, high range water
reducing admixture of complying type A or F under ASTM C 494 (Doses
of admixture to be fixed by the mix design), sand of minimum FM 2.5
and 20mm down well graded crushed stone chips broken from boulders
(Preferably stone chips from Madhyapara, Dinajpur, LAA value not
exceeding 30) conforming to ASTM C 33 including breaking chips,
screening through proper sieves, placing & maintaining re-bar cage in
position, jointing longitudinal bars by welding or re-bar coupling
method, placing and removing tripod/ derrick as per requirement,
mixing in mechanized batch mix plant & pumping using line pump or
boom placer, maintaining allowable slump of 150mm to 200mm, placing
a sliding plug or barrier to prevent direct contact between the first
charge of concrete in the pipe of the tremie and the water of drilling
fluid, pouring the concrete in bore hole with the help of trimie pipe,
maintaining the trimie pipe immersed in concrete by at least 1.5m
throughout the period of concreting etc. including cost of all materials,
labour, equipment and all incidental charges but excluding the cost of
reinforcement and its fabrication, welding, coupling and placing etc. all
complete as per design, drawing, specifications and direction of the E-I-
C. The contractor shall maintain a continuous record of the volume of
concrete used and the level of the concrete in the pipe. Any deviations
from the theoretical, or expected volume/ level relationship shall be
immediately reported to the E-I-C. Additional quantity of cement to be
added if required to attain the specified strength to be provided by the
contractor at his own cost. The Mix Design shall have to be approved by
the concerned District Quality Control Laboratory or any other reputed
laboratory approved by the competent authority before execution of the
work.
Note: Using Batching Plant, Transit Mixer & Concrete Pump
Ordinary Portland Cement (CEM I, 52.5N) 8.6000 bag 455.00 3913.00
Stone Chips (20mm down graded) [LAA≤30] 0.4900 m3 5320.00 2606.80
Stone Chips (12mm down graded) [LAA≤30] 0.3300 m3 4470.00 1475.10
Note : Rates of all items should be inclusive of all supply and carriage. Page: 383 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 10839.17
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 11055.95
Note : Rates of all items should be inclusive of all supply and carriage. Page: 384 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Note : Rates of all items should be inclusive of all supply and carriage. Page: 385 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 4053.12
Cost of welding & other consumables etc. ( +10.00 % on Subtotal-A ) 405.31
Subtotal-A1: 4458.43
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 4547.60
Note : Rates of all items should be inclusive of all supply and carriage. Page: 386 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 5003.12
Cost of welding & other consumables etc. ( +15.00 % on Subtotal-A ) 750.47
Subtotal-A1: 5753.58
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 5868.65
Note : Rates of all items should be inclusive of all supply and carriage. Page: 387 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 5970.06
Cost of welding & other consumables etc. ( +15.00 % on Subtotal-A ) 895.51
Subtotal-A1: 6865.57
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 7002.88
Note : Rates of all items should be inclusive of all supply and carriage. Page: 388 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 6870.06
Cost of welding & other consumables etc. ( +15.00 % on Subtotal-A ) 1030.51
Subtotal-A1: 7900.57
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 8058.58
Note : Rates of all items should be inclusive of all supply and carriage. Page: 389 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 10484.15
Cost of welding & other consumables etc. ( +15.00 % on Subtotal-A ) 1572.62
Subtotal-A1: 12056.77
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 12297.91
Note : Rates of all items should be inclusive of all supply and carriage. Page: 390 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 11774.15
Cost of welding & other consumables etc. ( +15.00 % on Subtotal-A ) 1766.12
Subtotal-A1: 13540.27
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 13811.08
Note : Rates of all items should be inclusive of all supply and carriage. Page: 391 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 16308.24
Cost of welding & other consumables etc. ( +15.00 % on Subtotal-A ) 2446.24
Subtotal-A1: 18754.48
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 19129.57
Note : Rates of all items should be inclusive of all supply and carriage. Page: 392 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 19525.53
Cost of welding & other consumables etc. ( +10.00 % on Subtotal-A ) 1952.55
Subtotal-A1: 21478.08
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 21907.64
Note : Rates of all items should be inclusive of all supply and carriage. Page: 393 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 29189.62
Cost of welding & other consumables etc. ( +7.50 % on Subtotal-A ) 2189.22
Subtotal-A1: 31378.84
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 32006.42
Note : Rates of all items should be inclusive of all supply and carriage. Page: 394 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 34988.29
Cost of welding & other consumables etc. ( +7.50 % on Subtotal-A ) 2624.12
Subtotal-A1: 37612.41
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 38364.66
Note : Rates of all items should be inclusive of all supply and carriage. Page: 395 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 51776.96
Cost of welding & other consumables etc. ( +7.50 % on Subtotal-A ) 3883.27
Subtotal-A1: 55660.23
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 56773.44
Note : Rates of all items should be inclusive of all supply and carriage. Page: 396 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 80775.63
Cost of welding & other consumables etc. ( +7.50 % on Subtotal-A ) 6058.17
Subtotal-A1: 86833.80
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 88570.48
Note : Rates of all items should be inclusive of all supply and carriage. Page: 397 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.07.07.01 SW: spot/tack welding at contact point of the spirals at reasonalbe each
intervals with the main vertical reinforcements of re-bar cage to be
placed in borehole.
Welder Helper 0.0040 day 470.00 1.88
Electrode 0.0010 pkt 810.00 0.81
H.C. of Welding Machine 0.0010 day 500.00 0.50
Subtotal-A: 3.19
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 3.25
4.07.07.02 LW: Direct type Lap-welded splice over two sides of contact by welding meter
of minimum length not less than 10 times of bar diameter unless
otherwise mentioned in the working drawing at the lap of main
reinforcement in re-bar cage to be placed in borehole.
Welder 0.1250 day 680.00 85.00
Electrode 0.3330 pkt 810.00 269.73
H.C. of Welding Machine 0.0400 day 500.00 20.00
Subtotal-A: 374.73
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 382.22
Note : Rates of all items should be inclusive of all supply and carriage. Page: 398 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.07.08 Labour for breaking head of hardened cast-in-situ bored pile/ pre-cast cum
piles to the correct lines and levels from the top of the piles to the cut-
off level as indicated in the approved drawing and exposing pile
reinforcement for embedment in pile cap by any means and disposal of
the debris to an unobjectionable place outside the site premises
including scrapping and removing concrete from steel/ MS rods,
straightening and bending of pile bars, preparation and making of
platform where necessary, carrying, all sorts of handling, stacking the
same properly after clearing, leveling and dressing the site and clearing
the river bed, etc. all complete as per direction of the E-I-C.
Measurement will be given for the actual pile head volume to be
broken.The debris from pile chipping shall be disposed outside the site
premises at an environmentally safe place with minimum traffic
disruption and procuring entity will not be responsilbe for any
irregularities by the party regarding dumping of the debris.
Skilled Labour 0.1500 day 450.00 67.50
Ordinary Labour 9.0000 day 370.00 3330.00
Mason 0.0100 day 550.00 5.50
Subtotal-A: 3403.00
Repairing of pile head including materials ( +10.00 % on Subtotal-A ) 340.30
Straightening and bending of pile bars, removing ( +10.00 % on Subtotal-A ) 340.30
the debris to a safe distance, tools & plant,
sundries etc.
Subtotal-A1: 4083.60
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 4165.27
Note : Rates of all items should be inclusive of all supply and carriage. Page: 399 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.07.09 RCC-17BCCM: Reinforced cement concrete work for pre-cast pile with cum
minimum cement content relates to nominal mix ratio 1:2:4 and
maximum water cement ratio 0.4 having minimum required average
strength, f'cr = 24 MPa and satisfying a compressive strength f'c = 17
MPa at 28 days on standard cylinders as per standard practice of Code
AASHTO/ ASTM and cement conforming to BDS EN 197-1 : 2003 CEM-
II/A-L/M/V/W 42.5N, sand of minimum FM 1.8 and 20mm down well
graded crushed picked brick chips (LAA value & maximum water
absorption not exceeding 38 & 15% respectively) conforming to ASTM C
33 including breaking chips, screening through proper sieves, cleaning
and washing, centering and shuttering with MS sheet, MS angle, nuts
and bolts, chamfering edges, preparation of casting beds, laying
polythene, placing reinforcement cages in position, mixing in standard
mixture machine with hoper, maintaining allowable slump of 50mm to
100mm, casting, compacting by mechanical vibrators and tapered rods
as where necessary, curing for 28 days etc. The cost of reinforcement
and it's fabrication, binding, welding and placing is not included in this
unit rate. Additional quantity of cement to be added if required to attain
the specified strength to be provided by the contractor at his own cost.
Note: Using Concrete Mixer
Portland Composite Cement (CEM-II/A-L/M/V/W 42.5N) 6.0500 bag 430.00 2601.50
1st Class Picked Brick Chips (20mm down graded) 0.5200 m3 2940.00 1528.80
1st Class Brick Chips (10mm down graded) 0.3400 m3 3049.00 1036.66
Sand (FM - 1.8) 0.4300 m3 970.00 417.10
Head Mason 0.0800 day 650.00 52.00
Mason 0.4200 day 550.00 231.00
Skilled Labour 0.7500 day 450.00 337.50
Ordinary Labour 2.0000 day 370.00 740.00
H.C. of Concrete Mixture Machine (Capacity 0.40/ 0.28 cum) 0.0600 day 1200.00 72.00
Hire and running charges of Concrete Vibrator 0.0600 day 400.00 24.00
Subtotal-A: 7040.56
Formwork/ shuttering and consumables etc. ( +9.00 % on Subtotal-A ) 633.65
Subtotal-A1: 7674.21
Note : Rates of all items should be inclusive of all supply and carriage. Page: 400 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 7827.69
Note : Rates of all items should be inclusive of all supply and carriage. Page: 401 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.07.10 RCC-25SCCM: Reinforced cement concrete work for pre-cast pile with cum
cement content relates to mix ratio 1:1.5:3 and maximum water cement
ratio 0.4 having minimum required average compressive strength, f'cr =
33.5 MPa and satisfying a compressive strength f'c = 25 MPa at 28 days
on standard cylinders as per standard practice of code AASHTO/ ASTM
and cement conforming to BDS EN 197-1 : 2003 CEM-II/A-L/M/V/W
42.5N, water reducing admixture of complying type A under ASTM C
494 (Doses of admixture to be fixed by the mix design), sand of
minimum FM 2.5 and 20mm down well graded crushed stone chips
broken from boulders (Preferably stone chips from Madhyapara,
Dinajpur, LAA value not exceeding 30) conforming to ASTM C 33,
including breaking stone boulders into chips, screening through proper
sieves, cleaning and washing, centering and shuttering with MS sheet,
MS angle, nuts and bolts, chamfering edges, preparation of casting
beds, laying polythene, placing reinforcement cages in position, mixing
in standard mixture machine with hoper, maintaining allowable slump of
50mm to 100mm, casting, compacting by mechanical vibrators and
tapered rods as where necessary, curing for 28 days etc. The cost of
reinforcement and it's fabrication, binding, welding and placing is not
included but the cost of admixture is included in this unit rate. Additional
quantity of cement to be added if required to attain the specified
strength to be provided by the contractor at his own cost.
Note: Using Concrete Mixer
Portland Composite Cement (CEM-II/A-L/M/V/W 42.5N) 7.7100 bag 430.00 3315.30
Stone Chips (20mm down graded) [LAA≤30] 0.4900 m3 5320.00 2606.80
Stone Chips (12mm down graded) [LAA≤30] 0.3300 m3 4470.00 1475.10
Sand (FM - 2.5) 0.4100 m3 1500.00 615.00
Water reducing chemical admixture : Type-A 1.9275 liter 130.00 250.58
Head Mason 0.0600 day 650.00 39.00
Mason 0.3500 day 550.00 192.50
Skilled Labour 1.0000 day 450.00 450.00
Ordinary Labour 1.1000 day 370.00 407.00
H.C. of Concrete Mixture Machine (Capacity 0.40/ 0.28 cum) 0.0600 day 1200.00 72.00
Hire and running charges of Concrete Vibrator 0.0600 day 400.00 24.00
Note : Rates of all items should be inclusive of all supply and carriage. Page: 402 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 9447.28
Steel formwork and consumables etc. ( +17.00 % on Subtotal-A ) 1606.04
Subtotal-A1: 11053.31
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 11274.38
Note : Rates of all items should be inclusive of all supply and carriage. Page: 403 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.07.11 RCC-25SCBP: Reinforced cement concrete work for pre-cast pile with cum
cement content relates to mix ratio 1:1.5:3 and maximum water cement
ratio 0.4 having minimum required average compressive strength, f'cr =
33.5 MPa and satisfying a compressive strength f'c = 25 MPa at 28 days
on standard cylinders as per standard practice of code AASHTO/ ASTM
and cement conforming to BDS EN 197-1 : 2003 CEM-II/A-L/M/V/W
42.5N, water reducing admixture of complying type A under ASTM C
494 (Doses of admixture to be fixed by the mix design), sand of
minimum FM 2.5 and 20mm down well graded crushed stone chips
broken from boulders (Preferably stone chips from Madhyapara,
Dinajpur, LAA value not exceeding 30) conforming to ASTM C 33,
including breaking stone boulders into chips, screening through proper
sieves, cleaning and washing, centering and shuttering with MS sheet,
MS angle, nuts and bolts, chamfering edges, preparation of casting
beds, laying polythene, placing reinforcement cages in position, mixing
in mechanized batch mix plant & pumping using line pump or boom
placer, maintaining allowable slump of 50mm to 100mm, casting,
compacting by mechanical vibrators and tapered rods as where
necessary, curing for 28 days etc. The cost of reinforcement and it's
fabrication, binding, welding and placing is not included but the cost of
admixture is included in this unit rate. Additional quantity of cement to
be added if required to attain the specified strength to be provided by
the contractor at his own cost.
Note: Using Batching Plant, Transit Mixer & Concrete Pump
Portland Composite Cement (CEM-II/A-L/M/V/W 42.5N) 7.7100 bag 430.00 3315.30
Stone Chips (20mm down graded) [LAA≤30] 0.4900 m3 5320.00 2606.80
Stone Chips (12mm down graded) [LAA≤30] 0.3300 m3 4470.00 1475.10
Sand (FM - 2.5) 0.4100 m3 1500.00 615.00
Water reducing chemical admixture : Type-A 1.9275 liter 130.00 250.58
Hire and running charges of Batching and Mixing Plant @ 20 0.0063 day 23000.00 144.90
cum/hour
H.C. of Generator (100 KVA) 0.0063 day 3500.00 22.05
H.C. of Backhoe End Loader (6 tons) 0.0063 day 6000.00 37.80
H.C. of Transit Mixer 4.0/4.5 cum capacity including fuel & 0.0200 day 10000.00 200.00
other related cost
Note : Rates of all items should be inclusive of all supply and carriage. Page: 404 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Hire and running charges of Concrete Pump (30 & 45 cum 0.0063 day 5000.00 31.50
capacity)
Head Mason 0.0600 day 650.00 39.00
Mason 0.3500 day 550.00 192.50
Skilled Labour 0.7500 day 450.00 337.50
Ordinary Labour 1.0000 day 370.00 370.00
Hire and running charges of Concrete Vibrator 0.0600 day 400.00 24.00
Subtotal-A: 9662.03
Steel Forwork and consumables etc. ( +17.00 % on Subtotal-A ) 1642.54
Subtotal-A1: 11304.57
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 11530.66
Note : Rates of all items should be inclusive of all supply and carriage. Page: 405 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.07.12 RCC-30SCBP: Reinforced cement concrete work for pre-cast pile with cum
minimum cement content and maximum water cement ratio as specified
by the laboratory having minimum required average compressive
strength, f'cr = 38.5 MPa and satisfying a specified compressive
strength, f'c = 30 MPa at 28 days on standard cylinders as per standard
practice of code AASHTO/ ASTM and cement conforming to BDS EN 197-
1 : 2003 CEM-I 52.5N / ASTM C150 Type-1, water reducing admixture
of complying type A under ASTM C 494 (Doses of admixture to be fixed
by the mix design), sand of minimum FM 2.5 and 20mm down well
graded crushed stone chips broken from boulders (Preferably stone
chips from Madhyapara, Dinajpur, LAA value not exceeding 30)
conforming to ASTM C 33, including breaking stone boulders into chips,
screening through proper sieves, cleaning and washing, centering and
shuttering with MS sheet, MS angle, nuts and bolts, chamfering edges,
preparation of casting beds, laying polythene, placing reinforcement
cages in position, mixing in mechanized batch mix plant & pumping
using line pump or boom placer, maintaining allowable slump of 50mm
to 100mm, casting, compacting by mechanical vibrators and tapered
rods as where necessary, curing for 28 days etc. The cost of
reinforcement and it's fabrication, binding, welding and placing is not
included but the cost of admixture is included in this unit rate. Additional
quantity of cement to be added if required to attain the specified
strength to be provided by the contractor at his own cost. The Mix
Design shall have to be approved by the concerned District Quality
Control Laboratory or any other reputed laboratory approved by the
competent authority before execution of the work.
Note: Using Batching Plant, Transit Mixer & Concrete Pump
Ordinary Portland Cement (CEM I, 52.5N) 8.6000 bag 455.00 3913.00
Stone Chips (20mm down graded) [LAA≤30] 0.4900 m3 5320.00 2606.80
Stone Chips (12mm down graded) [LAA≤30] 0.3300 m3 4470.00 1475.10
Sand (FM - 2.5) 0.4100 m3 1500.00 615.00
Water reducing chemical admixture : Type-A 2.1500 liter 130.00 279.50
Hire and running charges of Batching and Mixing Plant @ 20 0.0063 day 23000.00 144.90
cum/hour
H.C. of Generator (100 KVA) 0.0063 day 3500.00 22.05
H.C. of Backhoe End Loader (6 tons) 0.0063 day 6000.00 37.80
Note : Rates of all items should be inclusive of all supply and carriage. Page: 406 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
H.C. of Transit Mixer 4.0/4.5 cum capacity including fuel & 0.0200 day 10000.00 200.00
other related cost
Hire and running charges of Concrete Pump (30 & 45 cum 0.0063 day 5000.00 31.50
capacity)
Head Mason 0.0600 day 650.00 39.00
Mason 0.3500 day 550.00 192.50
Skilled Labour 0.7500 day 450.00 337.50
Ordinary Labour 1.0000 day 370.00 370.00
Hire and running charges of Concrete Vibrator 0.0600 day 400.00 24.00
Subtotal-A: 10288.65
Steel Formwork and consumables etc. ( +17.00 % on Subtotal-A ) 1749.07
Subtotal-A1: 12037.72
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 12278.47
Note : Rates of all items should be inclusive of all supply and carriage. Page: 407 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.07.13 Mobilization and demobilization of drop hammer type pre-cast pile set/site
driving rig set..
H.C. of Flat Body Truck (3 tons) 2.0000 day 2000.00 4000.00
Subtotal-A: 4000.00
Incidental & Sundries ( +10.00 % on Subtotal-A ) 400.00
Subtotal-A1: 4400.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 4488.00
4.07.14 Driving pre-cast RCC piles with drop hammer type rig in any type of soil
to the required depth including fitting and fixing steel cap, handling and
keeping in position and maintaining driving log in prescribed format as
per design, drawing & direction of the E-I-C. Before commencing driving
operation, contractor shall submit the methodology for carrying the
driving operation including sequence of driving to the E-I-C. The
maximum permitted deviation of the finished pile from the horizontal &
vertical shall be 50mm & 25mm respectively. Cutting of a pile not being
installed to the planned depth is exclusively subject to the approval of
Design Unit, LGED.
Note : Rates of all items should be inclusive of all supply and carriage. Page: 408 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 396.27
Preparation of Driving Log & Other Charges ( +5.00 % on Subtotal-A ) 19.81
Subtotal-A1: 416.08
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 424.40
4.07.14.01.02 For height: 6m and above m Add +15.00% with Item No 4.07.14.01.01
Note : Rates of all items should be inclusive of all supply and carriage. Page: 409 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 459.01
Preparation of Driving Log & Other Charges ( +5.00 % on Subtotal-A ) 22.95
Subtotal-A1: 481.96
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 491.60
4.07.14.02.02 For height: 6m and above m Add +15.00% with Item No 4.07.14.02.01
Note : Rates of all items should be inclusive of all supply and carriage. Page: 410 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 529.43
Preparation of Driving Log & Other Charges ( +5.00 % on Subtotal-A ) 26.47
Subtotal-A1: 555.91
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 567.02
4.07.14.03.02 For height: 6m and above m Add +15.00% with Item No 4.07.14.03.01
Note : Rates of all items should be inclusive of all supply and carriage. Page: 411 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 605.50
Preparation of Driving Log & Other Charges ( +5.00 % on Subtotal-A ) 30.27
Subtotal-A1: 635.77
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 648.49
4.07.14.04.02 For height: 6m and above m Add +15.00% with Item No 4.07.14.04.01
Note : Rates of all items should be inclusive of all supply and carriage. Page: 412 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.07.15 Mobilization and demobilization of automatic diesel hammer mounted per site
compete rig set.
H.C. of Crane for lifting & movement of diesel mounted 2.0000 day 50000.00 100000.00
hammer up to site
H.C. of Truck for carrying diesel hammer mounted rig 2.0000 day 12000.00 24000.00
Subtotal-A: 124000.00
Loading & Unloading and other costs ( +15.00 % on Subtotal-A ) 18600.00
Subtotal-A1: 142600.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 145452.00
4.07.16 Driving pre-cast RCC piles with automatic diesel hammer mounted rig in
any type of soil to the required depth including fitting and fixing steel
cap, handling and keeping in position and maintaining driving log in
prescribed format as per design, drawing & direction of the E-I-C.
Before commencing driving operation, contractor shall submit the
methodology for carrying the driving operation including sequence of
driving to the E-I-C. The maximum permitted deviation of the finished
pile from the horizontal & vertical shall be 50mm & 25mm respectively.
Cutting of a pile not being installed to the planned depth is exclusively
subject to the approval of Design Unit, LGED.
Note : Rates of all items should be inclusive of all supply and carriage. Page: 413 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 383.46
Tools & plant, consumables, spares, maintenance, ( +10.00 % on Subtotal-A ) 38.35
insurance etc.
Subtotal-A1: 421.81
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 430.24
Note : Rates of all items should be inclusive of all supply and carriage. Page: 414 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 485.74
Tools & plant, consumables, spares, maintenance, ( +10.00 % on Subtotal-A ) 48.57
insurance etc.
Subtotal-A1: 534.32
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 545.01
Note : Rates of all items should be inclusive of all supply and carriage. Page: 415 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 663.97
Tools & plant, consumables, spares, maintenance, ( +10.00 % on Subtotal-A ) 66.40
insurance etc.
Subtotal-A1: 730.37
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 744.98
Note : Rates of all items should be inclusive of all supply and carriage. Page: 416 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 729.80
Tools & plant, consumables, spares, maintenance, ( +10.00 % on Subtotal-A ) 72.98
insurance etc.
Subtotal-A1: 802.78
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 818.84
Note : Rates of all items should be inclusive of all supply and carriage. Page: 417 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 810.28
Tools & plant, consumables, spares, maintenance, ( +10.00 % on Subtotal-A ) 81.03
insurance etc.
Subtotal-A1: 891.31
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 909.13
Note : Rates of all items should be inclusive of all supply and carriage. Page: 418 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 325000.00
Loading & Unloading and consumables etc. ( +2.50 % on Subtotal-A ) 8125.00
Subtotal-A1: 333125.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 339787.50
Note : Rates of all items should be inclusive of all supply and carriage. Page: 419 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 365000.00
Loading & Unloading and consumables etc. ( +3.00 % on Subtotal-A ) 10950.00
Subtotal-A1: 375950.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 383469.00
Note : Rates of all items should be inclusive of all supply and carriage. Page: 420 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 405000.00
Loading & Unloading and consumables etc. ( +5.00 % on Subtotal-A ) 20250.00
Subtotal-A1: 425250.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 433755.00
Note : Rates of all items should be inclusive of all supply and carriage. Page: 421 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 465000.00
Loading & Unloading and consumables etc. ( +2.50 % on Subtotal-A ) 11625.00
Subtotal-A1: 476625.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 486157.50
Note : Rates of all items should be inclusive of all supply and carriage. Page: 422 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 505000.00
Loading & Unloading and other consumables etc. ( +2.50 % on Subtotal-A ) 12625.00
Subtotal-A1: 517625.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 527977.50
Note : Rates of all items should be inclusive of all supply and carriage. Page: 423 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.07.18 Driving pre-cast RCC piles of various sizes (250 mm x 250 mm to 600 m
mm x 600 mm) in any type of soil using Hydraulic Static pile driver
having free of any noise and vibration during driving including handling
and installation of pile keeping in position as shown in the drawing, all
labours, operators, tools, all equipment charges, power source, piles
splicing, site arrangement, keeping all measures to avoid any
disturbance to the adjacent structure, keeping driving record & pile
capacity Record etc. all complete as per design, drawing, specification &
direction of the E-I-C and finally submission of pile driving report in
3(three) copies duly signed by professional engineer. The maximum
permitted deviation of the finished pile from the horizontal & vertical
shall be 50mm & 25mm respectively. Cutting of a pile not being
installed to the planned depth is exclusively subject to the approval of E-
I-C.
Hire and running charges of hydraulic static pile driver 0.0025 day 280000.00 700.00
including complete accessories and shifting at site
Foreman 0.0025 day 800.00 2.00
Rig Operator 0.0025 day 600.00 1.50
Skilled Labour 0.0100 day 450.00 4.50
Subtotal-A: 708.00
Report Generation and consumables etc. ( +2.50 % on Subtotal-A ) 17.70
Subtotal-A1: 725.70
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 740.21
4.07.19 Driven vertical Steel piles of required shape and length including cost of
all materials and labour for hoisting, driving etc. and also including cost
of dummy lengths of pile and of hire charges of all instruments as
necessary complete as per drawing and & Technical Specification.
Note : Rates of all items should be inclusive of all supply and carriage. Page: 424 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 5190.38
For providing steel helmet during driving, stacking ( +1.00 % on Subtotal-A ) 51.90
of piles at site, providing anti-corrosion treatment
and other imponderables during installation.
Subtotal-A1: 5242.29
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 5347.13
Note : Rates of all items should be inclusive of all supply and carriage. Page: 425 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 5850.79
For providing steel helmet during driving, stacking ( +1.00 % on Subtotal-A ) 58.51
of piles at site, providing anti-corrosion treatment
and other imponderables during installation.
Subtotal-A1: 5909.30
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 6027.49
Note : Rates of all items should be inclusive of all supply and carriage. Page: 426 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.07.20 Manufacturing, supplying and fitting fixing MS shoe at RCC pre-cast pile each
tip with tip area 12mm x 12 mm, butt area 150mm x 150mm and height
250mm, fabricated with 6mm thick 4 nos MS plate (12mm x 150mm x
250mm) at sides and one plate (12mm x 12mm) at tip, having 6mm
thick continuous fillet weld at all joints and 20mm dia. 800mm long
anchor MS re-bar along with 4 nos. 20mm x 20mm x 3mm MS angle
welded to the tip plate including cost of all materials, labour etc. all
complete as per design, drawing & direction of the E-I-C.
LW: Direct type Lap-welded splice over two sides of contact 1.0800 meter 374.73 404.71
by welding of minimum length not less than 10 times of bar
diameter …...(4.07.07.02)
MS Angle 20mmx20mmx3mm 0.8620 kg 58.00 50.00
M.S. Ribbed/ Deformed Bar (Grade 300) 8.6900 kg 54.00 469.26
MS Plate (6mm thick) in Wt. 4.9200 kg 70.00 344.40
Ordinary Labour 0.0400 day 370.00 14.80
Subtotal-A: 1283.16
Cost of grinding. ( +5.00 % on Subtotal-A ) 64.16
Manufacturing cost for making, fitting and fixing of ( +25.00 % on Subtotal-A ) 320.79
pile shoe including cutting, shaping, sizing of MS
Plate & trasportation from workshop to site
Subtotal-A1: 1668.11
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 1701.48
Note : Rates of all items should be inclusive of all supply and carriage. Page: 427 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Note : Rates of all items should be inclusive of all supply and carriage. Page: 428 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 224.41
Steel Formwork ( +17.00 % on Subtotal-A ) 38.15
Subtotal-A1: 262.56
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 267.81
Note : Rates of all items should be inclusive of all supply and carriage. Page: 429 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 157.83
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 160.99
Note : Rates of all items should be inclusive of all supply and carriage. Page: 430 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 398.70
Steel Formwork ( +17.00 % on Subtotal-A ) 67.78
Subtotal-A1: 466.47
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 475.80
Note : Rates of all items should be inclusive of all supply and carriage. Page: 431 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 205.86
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 209.98
4.07.22 Supplying, fitting, fixing prefabricated square shaped two steel caps for
Pre-cast spliced pile made up by 6mm thick MS plate conforming to
ASTM A 36, sides formed by bent in channel shape to have only two line
of joinery on faces, having min 50 mm dia hole on its web; capping by
min. 12mm thick MS Plate shaping the edges in 45 degree, having min.
40 mm dia hole at centre to pass 25mm MS bar 450 mm in length;
jointed at channels root by welding; cap fitted with 2 nos. BDS ISO
6935-2: 2006 RB 400W complied 20mm U-bar 1250mm in length by
welding equidistance from centre holes of cap and shall have min 75mm
clear from pile faces; and finally, the system be fitted in correct
alignments on pile head positions waiting for concreting; both the pile
heads fitted with the steel caps be welded together through v-notches
in field, while one of the companion segment of piles drived in ground
and other one placed over it maintaining true verticality; all complete as
per design, drawing, specification & direction of E-I-C.
Note : Rates of all items should be inclusive of all supply and carriage. Page: 432 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 4781.23
Cost of Welding, grinding etc. ( +20.00 % on Subtotal-A ) 956.25
Manufacturing cost including cutting, shaping, ( +30.00 % on Subtotal-A ) 1434.37
sizing of MS Plate & trasportation from workshop
to site
Subtotal-A1: 7171.85
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 7315.29
Note : Rates of all items should be inclusive of all supply and carriage. Page: 433 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 5424.15
Cost of Welding, grinding etc. ( +20.00 % on Subtotal-A ) 1084.83
Manufacturing cost including cutting, shaping, ( +30.00 % on Subtotal-A ) 1627.24
sizing of MS Plate & trasportation from workshop
to site
Subtotal-A1: 8136.22
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 8298.95
Note : Rates of all items should be inclusive of all supply and carriage. Page: 434 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 6133.00
Cost of Welding, grinding etc. ( +20.00 % on Subtotal-A ) 1226.60
Manufacturing cost including cutting, shaping, ( +30.00 % on Subtotal-A ) 1839.90
sizing of MS Plate & trasportation from workshop
to site
Subtotal-A1: 9199.50
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 9383.49
Note : Rates of all items should be inclusive of all supply and carriage. Page: 435 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.07.23 SLT: Conducting static load test as per ASTM D 1143 or equivalent
standard for the cast in situ/ pre-cast pile providing required scaffolding,
bracing, jacks, pressure test gauge, loading unloading, arranging other
necessary plants and equipment including staging, mobilization,
demobilization, hire charge of gunny bag/ concrete block/ steel sheet,
sand and filling sacs/ gunny bags for loading, record readings and
preparation of results in standard forms and other incidental charges as
per standard practice and procedures including submission of load test
report, furnishing all graph and chart etc. complete in all respects
approved and accepted by the Engineer (Minimum two cyclic loading;
one at service load and another cycle at double the load of service load
then to continue loading till failure of the pile). Before commencing load
test, Contractor shall submit methodology along with combined
calibration report for conducting load test to the E-I-C for approval. The
Testing firm will be selected taking prior approval of procuring entity.
The methodology of static load test and driving logs/ boring & pouring
logs shall be the part of test report. Load Test and Report shall be
conducted under the supervision of a professional Geotechnical
Engineer registered in the Bangladesh Professional Engineers
Registration Board (BPERB), Institute of Engineers Bangladesh (IEB).
[Cost of Combined Calibration Test (Hydraulic Jack, pressure gauge &
electric/hydraulic pump) has been included in all sub-items.]
Note : Rates of all items should be inclusive of all supply and carriage. Page: 436 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 86470.00
Cost of Labour for bag filling, Stitching, loading & ( +30.00 % on Subtotal-A ) 25941.00
unloading
Report Generation and consumables etc. ( +5.00 % on Subtotal-A ) 4323.50
Subtotal-A1: 116734.50
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 119069.19
Note : Rates of all items should be inclusive of all supply and carriage. Page: 437 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 108430.00
Cost of Labour for bag filling, Stitching, loading & ( +30.00 % on Subtotal-A ) 32529.00
unloading
Report Generation and consumables etc. ( +5.00 % on Subtotal-A ) 5421.50
Subtotal-A1: 146380.50
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 149308.11
Note : Rates of all items should be inclusive of all supply and carriage. Page: 438 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 134770.00
Cost of Labour for bag filling, Stitching, loading & ( +30.00 % on Subtotal-A ) 40431.00
unloading
Report Generation and consumables etc. ( +5.00 % on Subtotal-A ) 6738.50
Subtotal-A1: 181939.50
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 185578.29
Note : Rates of all items should be inclusive of all supply and carriage. Page: 439 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 156520.00
Cost of Labour for bag filling, Stitching, loading & ( +30.00 % on Subtotal-A ) 46956.00
unloading
Report Generation and consumables etc. ( +5.00 % on Subtotal-A ) 7826.00
Subtotal-A1: 211302.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 215528.04
Note : Rates of all items should be inclusive of all supply and carriage. Page: 440 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 178270.00
Cost of Labour for bag filling, Stitching, loading & ( +30.00 % on Subtotal-A ) 53481.00
unloading
Report Generation and consumables etc. ( +5.00 % on Subtotal-A ) 8913.50
Subtotal-A1: 240664.50
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 245477.79
Note : Rates of all items should be inclusive of all supply and carriage. Page: 441 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 201125.00
Cost of Labour for bag filling, Stitching, loading & ( +30.00 % on Subtotal-A ) 60337.50
unloading
Report Generation and consumables etc. ( +5.00 % on Subtotal-A ) 10056.25
Subtotal-A1: 271518.75
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 276949.13
Note : Rates of all items should be inclusive of all supply and carriage. Page: 442 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 223700.00
Cost of Labour for bag filling, Stitching, loading & ( +30.00 % on Subtotal-A ) 67110.00
unloading
Report Generation and consumables etc. ( +5.00 % on Subtotal-A ) 11185.00
Subtotal-A1: 301995.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 308034.90
Note : Rates of all items should be inclusive of all supply and carriage. Page: 443 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 342464.00
Report Generation and consumables etc. ( +5.00 % on Subtotal-A ) 17123.20
Subtotal-A1: 359587.20
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 366778.94
Note : Rates of all items should be inclusive of all supply and carriage. Page: 444 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 412436.00
Report Generation and consumables etc. ( +5.00 % on Subtotal-A ) 20621.80
Subtotal-A1: 433057.80
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 441718.96
Note : Rates of all items should be inclusive of all supply and carriage. Page: 445 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 481575.00
Report Generation and consumables etc. ( +5.00 % on Subtotal-A ) 24078.75
Subtotal-A1: 505653.75
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 515766.83
Note : Rates of all items should be inclusive of all supply and carriage. Page: 446 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 550714.00
Report Generation and consumables etc. ( +5.00 % on Subtotal-A ) 27535.70
Subtotal-A1: 578249.70
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 589814.69
Note : Rates of all items should be inclusive of all supply and carriage. Page: 447 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 620686.00
Report Generation and consumables etc. ( +5.00 % on Subtotal-A ) 31034.30
Subtotal-A1: 651720.30
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 664754.71
Note : Rates of all items should be inclusive of all supply and carriage. Page: 448 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 689825.00
Report Generation and consumables etc. ( +5.00 % on Subtotal-A ) 34491.25
Subtotal-A1: 724316.25
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 738802.58
Note : Rates of all items should be inclusive of all supply and carriage. Page: 449 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.07.24 LLT: Performing Lateral load test for test load of 1.5 times of the
working lateral load in accordance with ASTM D 3966 (Standard Test
Methods for Deep Foundations under Lateral Load) on working pile
including the cost of arranging kenteldge, jacks, platform, reaction
frame with required anchorage, island where required, preparing the
pile head if necessary, dial gauges, joist and all other necessary
arrangement, loading and unloading, submission of the result, removal
of all arrangement after completion, cost of all labour, material,
carriage, leads and lift etc. complete as per approved drawing,
Technical specification and as directed by the Engineer-in-charge.
Before commencing load test, Contractor shall submit methodology for
conducting load test to the E-I-C for approval. The Testing firm will be
selected taking prior approval of procuring entity.
The methodology of lateral load test and driving logs/ boring & pouring
logs shall be the part of test report. Lateral Load Test and Report shall
be conducted under the supervision of a professional Geotechnical
Engineer registered in the Bangladesh Professional Engineers
Registration Board (BPERB), Institute of Engineers Bangladesh (IEB).
Subtotal-A: 25000.00
Report Generation and consumables etc. ( +5.00 % on Subtotal-A ) 1250.00
Subtotal-A1: 26250.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 26775.00
Note : Rates of all items should be inclusive of all supply and carriage. Page: 450 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 38000.00
Report Generation and consumables etc. ( +5.00 % on Subtotal-A ) 1900.00
Subtotal-A1: 39900.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 40698.00
Note : Rates of all items should be inclusive of all supply and carriage. Page: 451 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.07.25 Conducting initial load test upto three times the design load capacity on LS
single pile including installation of bored cast-in-situ pile to required
depth using reinforced cement concrete with minimum compressive
strength of 25 MPa at 28 days (suggested mix proportion 1:1.5:3, w/c
max. 0.4) on standard cylinders as per standard practice of Code
AASHTO/ ASTM and cement conforming to BDS EN 197-1 : 2003 CEM-
II 42.5N, coarse sand of minimum FM 2.5 and 20mm down well graded
crushed stone chips conforming to ASTM C33 (Preferably stone chips
from Madhyapara, Dinajpur, LAA value not exceeding 30) including
materials, boring/ drilling in all types of strata from ground level to
termination depth of pile including providing bentonite slurry (Dry
Bentonite powder of liquid limit of minimum 350 shall be mixed with
water @ minimum 4% by weight to make the fresh drilling fluid of
viscosity between 32-50 seconds and density less than 1.1gm/cc) and/
or casing for stabilization of pile bore, flushing of pile bore, cleaning,
providing plasticizer wherever required, breaking pile head to cut off
level and exposing pile reinforcement for embedment in pile cap,
constructing test pile cap including materials, excavation, all
arrangements of loading, unloading, equipments, jacks, recording of
results, labour, dismantling the pile cap after test, submission of test
report etc complete for the following as per design, drawing,
specification and direction of E-I-C.
Note : Rates of all items should be inclusive of all supply and carriage. Page: 452 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.07.26 PIT (Pile Integrity Test): Conducting Low-Strain Impact Integrity Testing
on cast-in-situ/ pre-cast piles in accordance with ASTM D 5882
(Standard Test Method for Low Strain Impact Integrity Testing of Deep
Foundations) using pile integrity tester containing calibrated measuring
devices like highly sensitive accelerometer, a magnification device, an
amplification box, a small impact device (hammer) & a computer with
ability to convert data from analog to digital form with graphical display
on completion of required setting/ driving of piles, preparation of pile
top by removing soil, mud, dust & chipping lean concrete lumps etc.,
mobilizing and demobilizing of equipment, preparation of results in
standard forms and compiling final report with recommendations on the
tests etc. complete in all respects approved and accepted by the E-I-C.
Report should include proper presentable graph of same wave speed
(m/sec), impendence reduction, interpretation of results, cross sectional
or material changes (if any), length of pile, concrete quality etc. Routine
test samples shall be chosen by E-I-C on random basis. Methodology for
conducting PIT shall be submitted to the E-I-C for approval and shall be
the part of PIT report. All pile integrity tests shall be performed and
analyzed under the supervison of a professional geotechnical engineer
registered in the Bangladesh Professional Engineers Registration Board
(BPERB), Institute of Engineers Bangladesh (IEB).
Note : Rates of all items should be inclusive of all supply and carriage. Page: 453 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 16250.00
Reporting charges and consumables etc. ( +5.00 % on Subtotal-A ) 812.50
Subtotal-A1: 17062.50
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 17403.75
Subtotal-A: 35.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 35.70
Note : Rates of all items should be inclusive of all supply and carriage. Page: 454 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.07.26.03 PIT on each additional pile after 10(ten) piles tested. each
PIT: per PIT after 1st 10 nos. PIT 1.0000 Each 1200.00 1200.00
Skilled Technician 0.0667 day 680.00 45.36
Semi Skilled Technician 0.0667 day 570.00 38.02
Subtotal-A: 1283.38
Reporting charges and consumables etc. ( +5.00 % on Subtotal-A ) 64.17
Subtotal-A1: 1347.54
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 1374.49
Note : Rates of all items should be inclusive of all supply and carriage. Page: 455 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.07.27 PDA (Pile Driving Analyzer) Test: Performing high-strain dynamic testing
on piles in accordance with ASTM D 4945 (Standard Method for High-
Strain Dynamic Testing of Deep Foundation) to evaluate integrity of the
hardened pile using pile driving analyser by impacting a weight of
atleast 1.5% to 2% of required ultimate pile bearing capacity with a fall
varying from 1m to 3m including preparing head, providing ply and
sheet plates, fixing atleast 2 pairs of strain & acceleration sensors at
diametrically opposite sides, experts, labour, mobilization,
demobilization, data acquisition, CAPWAP analysis, integrity,
interpolation, preparation of results in standard forms etc. complete in
all respects approved and accepted by the E-I-C. Routine test samples
shall be chosen by E-I-C on random basis. Before commencing PDA test,
Contractor shall submit methodology for conducting test to the E-I-C for
approval. The report should include true static capacity of the pile at the
time of testing, simulated static load test curve, total skin variation
along the length of pile, skin friction variation along the length of the
pile, compressive and tensile stressses developed in pile during testing,
net and total displacement of the pile & pile integrity. The Testing firm
will be selected taking prior approval of procuring entity. All PDA testing
shall be performed and analyzed under the supervison of a professional
geotechnical engineer registered in the Bangladesh Professional
Engineers Registration Board (BPERB), Institute of Engineers
Bangladesh (IEB).
Note : Rates of all items should be inclusive of all supply and carriage. Page: 456 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 56615.00
Hire charges for Hammer, Hammer guide, 50mm ( +10.00 % on Subtotal-A ) 5661.50
thick timber cushion, steel plate cap cover,
computer etc.
CAPWAP software analysis with reporting charges ( +15.00 % on Subtotal-A ) 8492.25
etc.
Subtotal-A1: 70768.75
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 72184.13
Note : Rates of all items should be inclusive of all supply and carriage. Page: 457 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 50615.00
Hire charges for Hammer, Hammer guide, 50mm ( +10.00 % on Subtotal-A ) 5061.50
thick timber cushion, steel plate cap cover,
computer etc.
CAPWAP software analysis with reporting charges ( +15.00 % on Subtotal-A ) 7592.25
etc.
Subtotal-A1: 63268.75
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 64534.13
Note : Rates of all items should be inclusive of all supply and carriage. Page: 458 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 48614.90
Hire charges for Hammer, Hammer guide, 50mm ( +10.00 % on Subtotal-A ) 4861.49
thick timber cushion, steel plate cap cover,
computer etc.
CAPWAP software analysis with reporting charges ( +15.00 % on Subtotal-A ) 7292.24
etc.
Subtotal-A1: 60768.63
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 61984.00
Note : Rates of all items should be inclusive of all supply and carriage. Page: 459 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 47615.00
Hire charges for Hammer, Hammer guide, 50mm ( +10.00 % on Subtotal-A ) 4761.50
thick timber cushion, steel plate cap cover,
computer etc.
CAPWAP software analysis with reporting charges ( +15.00 % on Subtotal-A ) 7142.25
etc.
Subtotal-A1: 59518.75
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 60709.13
Note : Rates of all items should be inclusive of all supply and carriage. Page: 460 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 123615.00
Hire charges for Hammer, Hammer guide, 50mm ( +10.00 % on Subtotal-A ) 12361.50
thick timber cushion, steel plate cap cover,
computer etc.
CAPWAP software analysis with reporting charges ( +15.00 % on Subtotal-A ) 18542.25
etc.
Subtotal-A1: 154518.75
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 157609.13
Note : Rates of all items should be inclusive of all supply and carriage. Page: 461 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 108615.00
Hire charges for Hammer, Hammer guide, 50mm ( +10.00 % on Subtotal-A ) 10861.50
thick timber cushion, steel plate cap cover,
computer etc.
CAPWAP software analysis with reporting charges ( +15.00 % on Subtotal-A ) 16292.25
etc.
Subtotal-A1: 135768.75
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 138484.13
Note : Rates of all items should be inclusive of all supply and carriage. Page: 462 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 103614.90
Hire charges for Hammer, Hammer guide, 50mm ( +10.00 % on Subtotal-A ) 10361.49
thick timber cushion, steel plate cap cover,
computer etc.
CAPWAP software analysis with reporting charges ( +15.00 % on Subtotal-A ) 15542.24
etc.
Subtotal-A1: 129518.63
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 132109.00
Note : Rates of all items should be inclusive of all supply and carriage. Page: 463 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 101115.00
Hire charges for Hammer, Hammer guide, 50mm ( +10.00 % on Subtotal-A ) 10111.50
thick timber cushion, steel plate cap cover,
computer etc.
CAPWAP software analysis with reporting charges ( +15.00 % on Subtotal-A ) 15167.25
etc.
Subtotal-A1: 126393.75
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 128921.63
Note : Rates of all items should be inclusive of all supply and carriage. Page: 464 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 151615.00
Hire charges for Hammer, Hammer guide, 50mm ( +10.00 % on Subtotal-A ) 15161.50
thick timber cushion, steel plate cap cover,
computer etc.
CAPWAP software analysis with reporting charges ( +15.00 % on Subtotal-A ) 22742.25
etc.
Subtotal-A1: 189518.75
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 193309.13
Note : Rates of all items should be inclusive of all supply and carriage. Page: 465 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 127615.00
Hire charges for Hammer, Hammer guide, 50mm ( +10.00 % on Subtotal-A ) 12761.50
thick timber cushion, steel plate cap cover,
computer etc.
CAPWAP software analysis with reporting charges ( +15.00 % on Subtotal-A ) 19142.25
etc.
Subtotal-A1: 159518.75
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 162709.13
Note : Rates of all items should be inclusive of all supply and carriage. Page: 466 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 119614.90
Hire charges for Hammer, Hammer guide, 50mm ( +10.00 % on Subtotal-A ) 11961.49
thick timber cushion, steel plate cap cover,
computer etc.
CAPWAP software analysis with reporting charges ( +15.00 % on Subtotal-A ) 17942.24
etc.
Subtotal-A1: 149518.63
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 152509.00
Note : Rates of all items should be inclusive of all supply and carriage. Page: 467 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 115615.00
Hire charges for Hammer, Hammer guide, 50mm ( +10.00 % on Subtotal-A ) 11561.50
thick timber cushion, steel plate cap cover,
computer etc.
CAPWAP software analysis with reporting charges ( +15.00 % on Subtotal-A ) 17342.25
etc.
Subtotal-A1: 144518.75
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 147409.13
Note : Rates of all items should be inclusive of all supply and carriage. Page: 468 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 176615.00
Hire charges for Hammer, Hammer guide, 50mm ( +10.00 % on Subtotal-A ) 17661.50
thick timber cushion, steel plate cap cover,
computer etc.
CAPWAP software analysis with reporting charges ( +15.00 % on Subtotal-A ) 26492.25
etc.
Subtotal-A1: 220768.75
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 225184.13
Note : Rates of all items should be inclusive of all supply and carriage. Page: 469 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 145115.00
Hire charges for Hammer, Hammer guide, 50mm ( +10.00 % on Subtotal-A ) 14511.50
thick timber cushion, steel plate cap cover,
computer etc.
CAPWAP software analysis with reporting charges ( +15.00 % on Subtotal-A ) 21767.25
etc.
Subtotal-A1: 181393.75
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 185021.63
Note : Rates of all items should be inclusive of all supply and carriage. Page: 470 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 134615.00
Hire charges for Hammer, Hammer guide, 50mm ( +10.00 % on Subtotal-A ) 13461.50
thick timber cushion, steel plate cap cover,
computer etc.
CAPWAP software analysis with reporting charges ( +15.00 % on Subtotal-A ) 20192.25
etc.
Subtotal-A1: 168268.75
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 171634.13
Note : Rates of all items should be inclusive of all supply and carriage. Page: 471 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 129365.00
Hire charges for Hammer, Hammer guide, 50mm ( +10.00 % on Subtotal-A ) 12936.50
thick timber cushion, steel plate cap cover,
computer etc.
CAPWAP software analysis with reporting charges ( +15.00 % on Subtotal-A ) 19404.75
etc.
Subtotal-A1: 161706.25
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 164940.38
Note : Rates of all items should be inclusive of all supply and carriage. Page: 472 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 579.92
MS pipe Thread 40mm long including Tools & ( +7.50 % on Subtotal-A ) 43.49
Equipment
Subtotal-A1: 623.42
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 635.89
Note : Rates of all items should be inclusive of all supply and carriage. Page: 473 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Note : Rates of all items should be inclusive of all supply and carriage. Page: 474 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.07.29.01 Mobilization & demobilization within 100km of Dhaka/ nearby source to set
site and CSL Testing on 4 (four) nos. access tubes or less of a single
bored pile/drilled shafts
CSL: Mobilization, demobilization & accomodation including 4 1.0000 set 200000.00 200000.00
nos. CSL (Crosshole Sonic Logging)
Plumber/ Electric Mistry/ Painter 1.0000 day 680.00 680.00
Helper of Plumber/ Electric Mistry/ Painter/ Carpenter/ 1.0000 day 470.00 470.00
Operator
Subtotal-A: 201150.00
Reporting charges and consumables etc. ( +5.00 % on Subtotal-A ) 10057.50
Subtotal-A1: 211207.50
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 215431.65
Subtotal-A: 35.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 35.70
Note : Rates of all items should be inclusive of all supply and carriage. Page: 475 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.07.29.03 CSL Testing on each additional access tube after 4(four) access tubes each
CSL: per CSL after 1st 4 nos. CSL 1.0000 each 40000.00 40000.00
Plumber/ Electric Mistry/ Painter 0.2500 day 680.00 170.00
Helper of Plumber/ Electric Mistry/ Painter/ Carpenter/ 0.2500 day 470.00 117.50
Operator
Subtotal-A: 40287.50
Reporting charges and consumables etc. ( +5.00 % on Subtotal-A ) 2014.38
Subtotal-A1: 42301.88
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 43147.91
4.08.01 Sinking of Well as per specification through all types of strata namely
sandy soil, clayey soil and rock as shown against each case, including
drawing Foundation Wells true to position and plumb with dia under
cutting edge as mentioned below, including hire charges of all tools and
plants etc. and supplying power, dewatering etc., initial excavation of
earth complete as per drawing and technical specifications and direction
of the Engineer-in-charge including throwing the spoils clear off the well
up to 150m radius (Measurement to be taken in the following stages
from the level of the bottom of capping slab on well up to the bottom of
cutting edge) through any kind of soil including rocky soil and rock till
25% of cutting edge (linear) comes in contact with rock including
testing of bottom plug by dewatering the well upto 5 meters and
checking the rise in water level as per Specification. Depth of sinking is
reckoned from bed level.
Note : Rates of all items should be inclusive of all supply and carriage. Page: 476 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 4416.00
Consumables in sinking ( +10.00 % on Subtotal-A ) 441.60
Subtotal-A1: 4857.60
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 4954.75
Note : Rates of all items should be inclusive of all supply and carriage. Page: 477 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 6270.00
Consumables in sinking ( +10.00 % on Subtotal-A ) 627.00
Subtotal-A1: 6897.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 7034.94
4.08.01.01.03 Depth beyond 10.0 m up to 15.0 m m Add +16.00% with Item No 4.08.01.01.02
4.08.01.01.04 Depth beyond 15.0 m up to 20.0 m m Add +48.00% with Item No 4.08.01.01.02
4.08.01.01.05 Depth beyond 20.0 m up to 25.0 m m Add +145.00% with Item No 4.08.01.01.02
[Considering additional cost for Kentledge including supports, loading
arrangement and Labour.]
4.08.01.01.06 Depth beyond 25.0 m up to 30.0 m m Add +250.00% with Item No 4.08.01.01.02
[Considering additional cost for Kentledge including supports, loading
arrangement and Labour.]
Note : Rates of all items should be inclusive of all supply and carriage. Page: 478 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 6315.00
Consumables in sinking ( +10.00 % on Subtotal-A ) 631.50
Subtotal-A1: 6946.50
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 7085.43
Note : Rates of all items should be inclusive of all supply and carriage. Page: 479 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 13255.00
Consumables in sinking ( +10.00 % on Subtotal-A ) 1325.50
Subtotal-A1: 14580.50
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 14872.11
4.08.01.02.03 Depth beyond 10.0 m up to 15.0 m m Add +20.00% with Item No 4.08.01.02.02
4.08.01.02.04 Depth beyond 15.0 m up to 20.0 m m Add +55.00% with Item No 4.08.01.02.02
4.08.01.02.05 Depth beyond 20.0 m up to 25.0 m m Add +160.00% with Item No 4.08.01.02.02
[Considering additional cost for Dewatering, Kentledge including
supports, loading arrangement and Labour.]
4.08.01.02.06 Depth beyond 25.0 m up to 30.0 m m Add +280.00% with Item No 4.08.01.02.02
[Considering additional cost for Dewatering, Kentledge including
supports, loading arrangement and Labour.]
Note : Rates of all items should be inclusive of all supply and carriage. Page: 480 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 17394.75
Consumables in sinking ( +10.00 % on Subtotal-A ) 1739.48
Cost for Dewatering ( +5.00 % on Subtotal-A ) 869.74
Subtotal-A1: 20003.96
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 20404.04
Note : Rates of all items should be inclusive of all supply and carriage. Page: 481 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 6645.60
Consumables in sinking ( +10.00 % on Subtotal-A ) 664.56
Subtotal-A1: 7310.16
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 7456.36
Note : Rates of all items should be inclusive of all supply and carriage. Page: 482 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 8874.00
Consumables in sinking ( +10.00 % on Subtotal-A ) 887.40
Subtotal-A1: 9761.40
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 9956.63
4.08.01.04.03 Depth beyond 10.0 m up to 15.0 m m Add +16.00% with Item No 4.08.01.04.02
4.08.01.04.04 Depth beyond 15.0 m up to 20.0 m m Add +48.00% with Item No 4.08.01.04.02
4.08.01.04.05 Depth beyond 20.0 m up to 25.0 m m Add +145.00% with Item No 4.08.01.04.02
[Considering additional cost for Kentledge including supports, loading
arrangement and Labour.]
4.08.01.04.06 Depth beyond 25.0 m up to 30.0 m m Add +250.00% with Item No 4.08.01.04.02
[Considering additional cost for Kentledge including supports, loading
arrangement and Labour.]
Note : Rates of all items should be inclusive of all supply and carriage. Page: 483 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 8874.00
Consumables in sinking ( +10.00 % on Subtotal-A ) 887.40
Subtotal-A1: 9761.40
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 9956.63
Note : Rates of all items should be inclusive of all supply and carriage. Page: 484 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 12858.75
Consumables in sinking ( +10.00 % on Subtotal-A ) 1285.88
Subtotal-A1: 14144.63
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 14427.52
4.08.01.05.03 Depth beyond 10.0 m up to 15.0 m m Add +20.00% with Item No 4.08.01.05.02
4.08.01.05.04 Depth beyond 15.0 m up to 20.0 m m Add +55.00% with Item No 4.08.01.05.02
4.08.01.05.05 Depth beyond 20.0 m up to 25.0 m m Add +160.00% with Item No 4.08.01.05.02
[Considering additional cost for Dewatering, Kentledge including
supports, loading arrangement and Labour.]
4.08.01.05.06 Depth beyond 25.0 m up to 30.0 m m Add +280.00% with Item No 4.08.01.05.02
[Considering additional cost for Dewatering, Kentledge including
supports, loading arrangement and Labour.]
Note : Rates of all items should be inclusive of all supply and carriage. Page: 485 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 14848.50
Consumables in sinking ( +10.00 % on Subtotal-A ) 1484.85
Cost for Dewatering ( +5.00 % on Subtotal-A ) 742.43
Subtotal-A1: 17075.78
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 17417.29
Note : Rates of all items should be inclusive of all supply and carriage. Page: 486 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 8124.00
Consumables in sinking ( +10.00 % on Subtotal-A ) 812.40
Subtotal-A1: 8936.40
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 9115.13
Note : Rates of all items should be inclusive of all supply and carriage. Page: 487 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 10000.00
Consumables in sinking ( +10.00 % on Subtotal-A ) 1000.00
Subtotal-A1: 11000.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 11220.00
4.08.01.07.03 Depth beyond 10.0 m up to 15.0 m m Add +16.00% with Item No 4.08.01.07.02
4.08.01.07.04 Depth beyond 15.0 m up to 20.0 m m Add +48.00% with Item No 4.08.01.07.02
4.08.01.07.05 Depth beyond 20.0 m up to 25.0 m m Add +145.00% with Item No 4.08.01.07.02
[Considering additional cost for Kentledge including supports, loading
arrangement and Labour.]
4.08.01.07.06 Depth beyond 25.0 m up to 30.0 m m Add +250.00% with Item No 4.08.01.07.02
[Considering additional cost for Kentledge including supports, loading
arrangement and Labour.]
Note : Rates of all items should be inclusive of all supply and carriage. Page: 488 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 10876.00
Consumables in sinking ( +10.00 % on Subtotal-A ) 1087.60
Subtotal-A1: 11963.60
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 12202.87
Note : Rates of all items should be inclusive of all supply and carriage. Page: 489 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 13371.75
Consumables in sinking ( +10.00 % on Subtotal-A ) 1337.18
Subtotal-A1: 14708.93
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 15003.10
4.08.01.08.03 Depth beyond 10.0 m up to 15.0 m m Add +20.00% with Item No 4.08.01.08.02
[Considering additional cost for Dewatering]
4.08.01.08.04 Depth beyond 15.0 m up to 20.0 m m Add +55.00% with Item No 4.08.01.08.02
[Considering additional cost for Dewatering]
4.08.01.08.05 Depth beyond 20.0 m up to 25.0 m m Add +160.00% with Item No 4.08.01.08.02
[Considering additional cost for Dewatering, Kentledge including
supports, loading arrangement and Labour.]
4.08.01.08.06 Depth beyond 25.0 m up to 30.0 m m Add +280.00% with Item No 4.08.01.08.02
[Considering additional cost for Dewatering, Kentledge including
supports, loading arrangement and Labour.]
Note : Rates of all items should be inclusive of all supply and carriage. Page: 490 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 16576.00
Consumables in sinking ( +10.00 % on Subtotal-A ) 1657.60
Cost for Dewatering ( +5.00 % on Subtotal-A ) 828.80
Subtotal-A1: 19062.40
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 19443.65
Note : Rates of all items should be inclusive of all supply and carriage. Page: 491 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 8227.00
Consumables in sinking ( +10.00 % on Subtotal-A ) 822.70
Subtotal-A1: 9049.70
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 9230.69
Note : Rates of all items should be inclusive of all supply and carriage. Page: 492 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 10956.00
Consumables in sinking ( +10.00 % on Subtotal-A ) 1095.60
Subtotal-A1: 12051.60
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 12292.63
4.08.01.10.03 Depth beyond 10.0 m up to 15.0 m m Add +16.00% with Item No 4.08.01.10.02
4.08.01.10.04 Depth beyond 15.0 m up to 20.0 m m Add +48.00% with Item No 4.08.01.10.02
4.08.01.10.05 Depth beyond 20.0 m up to 25.0 m m Add +145.00% with Item No 4.08.01.10.02
[Considering additional cost for Kentledge including supports, loading
arrangement and Labour.]
4.08.01.10.06 Depth beyond 25.0 m up to 30.0 m m Add +250.00% with Item No 4.08.01.10.02
[Considering additional cost for Kentledge including supports, loading
arrangement and Labour.]
Note : Rates of all items should be inclusive of all supply and carriage. Page: 493 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 11502.60
Consumables in sinking ( +10.00 % on Subtotal-A ) 1150.26
Subtotal-A1: 12652.86
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 12905.92
Note : Rates of all items should be inclusive of all supply and carriage. Page: 494 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 14484.00
Consumables in sinking ( +10.00 % on Subtotal-A ) 1448.40
+.
Subtotal-A1: 15932.40
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 16251.05
4.08.01.11.03 Depth beyond 10.0 m up to 15.0 m m Add +20.00% with Item No 4.08.01.11.02
[Considering additional cost for Dewatering]
4.08.01.11.04 Depth beyond 15.0 m up to 20.0 m m Add +55.00% with Item No 4.08.01.11.02
[Considering additional cost for Dewatering]
4.08.01.11.05 Depth beyond 20.0 m up to 25.0 m m Add +160.00% with Item No 4.08.01.11.02
[Considering additional cost for Dewatering, Kentledge including
supports, loading arrangement and Labour.]
4.08.01.11.06 Depth beyond 25.0 m up to 30.0 m m Add +280.00% with Item No 4.08.01.11.02
[Considering additional cost for Dewatering, Kentledge including
supports, loading arrangement and Labour.]
Note : Rates of all items should be inclusive of all supply and carriage. Page: 495 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 19842.00
Consumables in sinking ( +10.00 % on Subtotal-A ) 1984.20
Cost for Dewatering ( +5.00 % on Subtotal-A ) 992.10
Subtotal-A1: 22818.30
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 23274.67
Note : Rates of all items should be inclusive of all supply and carriage. Page: 496 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 9830.00
Consumables in sinking ( +10.00 % on Subtotal-A ) 983.00
Subtotal-A1: 10813.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 11029.26
Note : Rates of all items should be inclusive of all supply and carriage. Page: 497 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 11593.60
Consumables in sinking ( +10.00 % on Subtotal-A ) 1159.36
Subtotal-A1: 12752.96
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 13008.02
4.08.01.13.03 Depth beyond 10.0 m up to 15.0 m m Add +16.00% with Item No 4.08.01.13.02
4.08.01.13.04 Depth beyond 15.0 m up to 20.0 m m Add +48.00% with Item No 4.08.01.13.02
4.08.01.13.05 Depth beyond 20.0 m up to 25.0 m m Add +145.00% with Item No 4.08.01.13.02
[Considering additional cost for Kentledge including supports, loading
arrangement and Labour.]
4.08.01.13.06 Depth beyond 25.0 m up to 30.0 m m Add +250.00% with Item No 4.08.01.13.02
[Considering additional cost for Kentledge including supports, loading
arrangement and Labour.]
Note : Rates of all items should be inclusive of all supply and carriage. Page: 498 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 12707.50
Consumables in sinking ( +10.00 % on Subtotal-A ) 1270.75
Subtotal-A1: 13978.25
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 14257.82
Note : Rates of all items should be inclusive of all supply and carriage. Page: 499 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 14325.00
Consumables in sinking ( +10.00 % on Subtotal-A ) 1432.50
Subtotal-A1: 15757.50
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 16072.65
4.08.01.14.03 Depth beyond 10.0 m up to 15.0 m m Add +20.00% with Item No 4.08.01.14.02
[Considering additional cost for Dewatering]
4.08.01.14.04 Depth beyond 15.0 m up to 20.0 m m Add +55.00% with Item No 4.08.01.14.02
[Considering additional cost for Dewatering]
4.08.01.14.05 Depth beyond 20.0 m up to 25.0 m m Add +160.00% with Item No 4.08.01.14.02
[Considering additional cost for Dewatering, Kentledge including
supports, loading arrangement and Labour.]
4.08.01.14.06 Depth beyond 25.0 m up to 30.0 m m Add +280.00% with Item No 4.08.01.14.02
[Considering additional cost for Dewatering, Kentledge including
supports, loading arrangement and Labour.]
Note : Rates of all items should be inclusive of all supply and carriage. Page: 500 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 21619.25
Consumables in sinking ( +10.00 % on Subtotal-A ) 2161.93
Cost for Dewatering ( +5.00 % on Subtotal-A ) 1080.96
Subtotal-A1: 24862.14
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 25359.38
Note : Rates of all items should be inclusive of all supply and carriage. Page: 501 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 22515.00
Consumables in sinking ( +10.00 % on Subtotal-A ) 2251.50
Subtotal-A1: 24766.50
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 25261.83
Note : Rates of all items should be inclusive of all supply and carriage. Page: 502 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 18142.00
Consumables in sinking ( +10.00 % on Subtotal-A ) 1814.20
Subtotal-A1: 19956.20
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 20355.32
4.08.01.16.03 Depth beyond 10.0 m up to 15.0 m m Add +16.00% with Item No 4.08.01.16.02
4.08.01.16.04 Depth beyond 15.0 m up to 20.0 m m Add +48.00% with Item No 4.08.01.16.02
4.08.01.16.05 Depth beyond 20.0 m up to 25.0 m m Add +145.00% with Item No 4.08.01.16.02
[Considering additional cost for Kentledge including supports, loading
arrangement and Labour.]
4.08.01.16.06 Depth beyond 25.0 m up to 30.0 m m Add +250.00% with Item No 4.08.01.16.02
[Considering additional cost for Kentledge including supports, loading
arrangement and Labour.]
Note : Rates of all items should be inclusive of all supply and carriage. Page: 503 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 21256.00
Consumables in sinking ( +10.00 % on Subtotal-A ) 2125.60
Subtotal-A1: 23381.60
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 23849.23
Note : Rates of all items should be inclusive of all supply and carriage. Page: 504 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 29604.25
Consumables in sinking ( +10.00 % on Subtotal-A ) 2960.43
Subtotal-A1: 32564.68
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 33215.97
4.08.01.17.03 Depth beyond 10.0 m up to 15.0 m m Add +20.00% with Item No 4.08.01.17.02
[Considering additional cost for Dewatering]
4.08.01.17.04 Depth beyond 15.0 m up to 20.0 m m Add +55.00% with Item No 4.08.01.17.02
[Considering additional cost for Dewatering]
4.08.01.17.05 Depth beyond 20.0 m up to 25.0 m m Add +160.00% with Item No 4.08.01.17.02
[Considering additional cost for Dewatering, Kentledge including
supports, loading arrangement and Labour.]
4.08.01.17.06 Depth beyond 25.0 m up to 30.0 m m Add +280.00% with Item No 4.08.01.17.02
[Considering additional cost for Dewatering, Kentledge including
supports, loading arrangement and Labour.]
Note : Rates of all items should be inclusive of all supply and carriage. Page: 505 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 48452.50
Consumables in sinking ( +10.00 % on Subtotal-A ) 4845.25
Cost for Dewatering ( +5.00 % on Subtotal-A ) 2422.63
Subtotal-A1: 55720.38
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 56834.78
Note : Rates of all items should be inclusive of all supply and carriage. Page: 506 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 46714.00
Consumables in sinking ( +10.00 % on Subtotal-A ) 4671.40
Subtotal-A1: 51385.40
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 52413.11
Note : Rates of all items should be inclusive of all supply and carriage. Page: 507 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 52924.00
Consumables in sinking ( +10.00 % on Subtotal-A ) 5292.40
Subtotal-A1: 58216.40
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 59380.73
4.08.01.19.03 Depth beyond 10.0 m up to 15.0 m m Add +16.00% with Item No 4.08.01.19.02
4.08.01.19.04 Depth beyond 15.0 m up to 20.0 m m Add +48.00% with Item No 4.08.01.19.02
4.08.01.19.05 Depth beyond 20.0 m up to 25.0 m m Add +145.00% with Item No 4.08.01.19.02
[Considering additional cost for Kentledge including supports, loading
arrangement and Labour.]
4.08.01.19.06 Depth beyond 25.0 m up to 30.0 m m Add +250.00% with Item No 4.08.01.19.02
[Considering additional cost for Kentledge including supports, loading
arrangement and Labour.]
Note : Rates of all items should be inclusive of all supply and carriage. Page: 508 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 52020.00
Consumables in sinking ( +10.00 % on Subtotal-A ) 5202.00
Subtotal-A1: 57222.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 58366.44
Note : Rates of all items should be inclusive of all supply and carriage. Page: 509 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 74571.00
Consumables in sinking ( +10.00 % on Subtotal-A ) 7457.10
Subtotal-A1: 82028.10
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 83668.66
4.08.01.20.03 Depth beyond 10.0 m up to 15.0 m m Add +20.00% with Item No 4.08.01.20.02
[Considering additional cost for Dewatering]
4.08.01.20.04 Depth beyond 15.0 m up to 20.0 m m Add +55.00% with Item No 4.08.01.20.02
[Considering additional cost for Dewatering]
4.08.01.20.05 Depth beyond 20.0 m up to 25.0 m m Add +160.00% with Item No 4.08.01.20.02
[Considering additional cost for Dewatering, Kentledge including
supports, loading arrangement and Labour.]
4.08.01.20.06 Depth beyond 25.0 m up to 30.0 m m Add +280.00% with Item No 4.08.01.20.02
[Considering additional cost for Dewatering, Kentledge including
supports, loading arrangement and Labour.]
Note : Rates of all items should be inclusive of all supply and carriage. Page: 510 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 113719.50
Consumables in sinking ( +10.00 % on Subtotal-A ) 11371.95
Cost for Dewatering ( +5.00 % on Subtotal-A ) 5685.98
Subtotal-A1: 130777.43
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 133392.97
Note : Rates of all items should be inclusive of all supply and carriage. Page: 511 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.08.02 Sinking of Twin D Type Well as per specification through all types of
strata namely sandy soil, clayey soil and rock as shown against each
case, including drawing Foundation Wells true to position and plumb
with dia under cutting edge as mentioned below, including hire charges
of all tools and plants etc. and supplying power, dewatering etc., initial
excavation of earth complete as per drawing and technical specifications
and direction of the Engineer-in-charge including throwing the spoils
clear off the well up to 150m radius (Measurement to be taken in the
following stages from the level of the bottom of capping slab on well up
to the bottom of cutting edge). Depth of sinking is reckoned from bed
level.
Subtotal-A: 10535.00
Consumables in sinking ( +10.00 % on Subtotal-A ) 1053.50
Subtotal-A1: 11588.50
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 11820.27
Note : Rates of all items should be inclusive of all supply and carriage. Page: 512 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 11400.00
Consumables in sinking ( +10.00 % on Subtotal-A ) 1140.00
Subtotal-A1: 12540.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 12790.80
4.08.02.01.03 Depth beyond 10.0 m up to 15.0 m m Add +16.00% with Item No 4.08.02.01.02
4.08.02.01.04 Depth beyond 15.0 m up to 20.0 m m Add +48.00% with Item No 4.08.02.01.02
4.08.02.01.05 Depth beyond 20.0 m up to 25.0 m m Add +145.00% with Item No 4.08.02.01.02
[Considering additional cost for Kentledge including supports, loading
arrangement and Labour.]
4.08.02.01.06 Depth beyond 25.0 m up to 30.0 m m Add +250.00% with Item No 4.08.02.01.02
[Considering additional cost for Kentledge including supports, loading
arrangement and Labour.]
Note : Rates of all items should be inclusive of all supply and carriage. Page: 513 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 12503.60
Consumables in sinking ( +10.00 % on Subtotal-A ) 1250.36
Subtotal-A1: 13753.96
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 14029.04
Note : Rates of all items should be inclusive of all supply and carriage. Page: 514 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 15851.85
Consumables in sinking ( +10.00 % on Subtotal-A ) 1585.19
Subtotal-A1: 17437.04
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 17785.78
4.08.02.02.03 Depth beyond 10.0 m up to 15.0 m m Add +20.00% with Item No 4.08.02.02.02
4.08.02.02.04 Depth beyond 15.0 m up to 20.0 m m Add +55.00% with Item No 4.08.02.02.02
4.08.02.02.05 Depth beyond 20.0 m up to 25.0 m m Add +160.00% with Item No 4.08.02.02.02
[Considering additional cost for Dewatering, Kentledge including
supports, loading arrangement and Labour.]
4.08.02.02.06 Depth beyond 25.0 m up to 30.0 m m Add +280.00% with Item No 4.08.02.02.02
[Considering additional cost for Dewatering, Kentledge including
supports, loading arrangement and Labour.]
Note : Rates of all items should be inclusive of all supply and carriage. Page: 515 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 24113.60
Consumables in sinking ( +10.00 % on Subtotal-A ) 2411.36
Cost for Dewatering ( +5.00 % on Subtotal-A ) 1205.68
Subtotal-A1: 27730.64
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 28285.25
Note : Rates of all items should be inclusive of all supply and carriage. Page: 516 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.08.03 SL: Providing Steel liner 10 mm thick for Curbs and 6 mm thick for MT
Steining of Wells including fabrication and setting out as per detailed
drawing, specification and direction of Engineer-in-Charge.
Corrosion resistant Structural steel 1050.0000 kg 58.00 60900.00
Helper of Plumber/ Electric Mistry/ Painter/ Carpenter/ 1.2400 day 470.00 582.80
Operator
Fitter 6.0000 day 680.00 4080.00
Blacksmith 5.0000 day 450.00 2250.00
Welder 5.0000 day 680.00 3400.00
Ordinary Labour 10.0000 day 370.00 3700.00
Subtotal-A: 74912.80
Electrodes, gas cutting and other consumables ( +5.00 % on Subtotal-A ) 3745.64
Subtotal-A1: 78658.44
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 80231.61
Note : Rates of all items should be inclusive of all supply and carriage. Page: 517 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.08.04 SCE: Providing and laying Steel Cutting edge weighing not less than 40 MT
kg per metre for Well foundation including cost & carriage of all
materials complete as per drawing, specification and direction of
Engineer-in-charge.
Corrosion resistant Structural steel 1050.0000 kg 58.00 60900.00
Nails/ Nut bolts/ Screw/ Spikes 20.0000 kg 65.00 1300.00
Fitter 5.5000 day 680.00 3740.00
Blacksmith 5.5000 day 450.00 2475.00
Welder 5.5000 day 680.00 3740.00
Skilled Labour 1.3200 day 450.00 594.00
Ordinary Labour 16.5000 day 370.00 6105.00
Subtotal-A: 78854.00
Electrodes, gas cutting and other consumables ( +10.00 % on Subtotal-A ) 7885.40
Subtotal-A1: 86739.40
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 88474.19
Note : Rates of all items should be inclusive of all supply and carriage. Page: 518 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 6376.77
Formwork ( +20.00 % on Subtotal-A ) 1275.35
Subtotal-A1: 7652.12
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 7805.17
Note : Rates of all items should be inclusive of all supply and carriage. Page: 519 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 8104.15
Formwork ( +20.00 % on Subtotal-A ) 1620.83
Subtotal-A1: 9724.98
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 9919.47
Note : Rates of all items should be inclusive of all supply and carriage. Page: 520 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 7809.69
Formwork ( +20.00 % on Subtotal-A ) 1561.94
Subtotal-A1: 9371.63
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 9559.06
Note : Rates of all items should be inclusive of all supply and carriage. Page: 521 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
IT 4% of Total 467.33
Total: 11683.30
Subtotal-A: 9079.71
Formwork ( +20.00 % on Subtotal-A ) 1815.94
Subtotal-A1: 10895.65
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 11113.56
Note : Rates of all items should be inclusive of all supply and carriage. Page: 522 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 8785.25
Formwork ( +20.00 % on Subtotal-A ) 1757.05
Subtotal-A1: 10542.30
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 10753.15
Note : Rates of all items should be inclusive of all supply and carriage. Page: 523 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Total: 13142.73
Subtotal-A: 9713.01
Formwork ( +20.00 % on Subtotal-A ) 1942.60
Subtotal-A1: 11655.61
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 11888.72
Note : Rates of all items should be inclusive of all supply and carriage. Page: 524 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 9418.55
Formwork ( +20.00 % on Subtotal-A ) 1883.71
Subtotal-A1: 11302.26
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 11528.31
Note : Rates of all items should be inclusive of all supply and carriage. Page: 525 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Total: 14090.15
Subtotal-A: 6376.77
Formwork ( +10.00 % on Subtotal-A ) 637.68
Subtotal-A1: 7014.45
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 7154.74
Note : Rates of all items should be inclusive of all supply and carriage. Page: 526 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 8104.15
Formwork ( +10.00 % on Subtotal-A ) 810.41
Subtotal-A1: 8914.56
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 9092.85
Note : Rates of all items should be inclusive of all supply and carriage. Page: 527 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 7809.69
Formwork ( +10.00 % on Subtotal-A ) 780.97
Subtotal-A1: 8590.66
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 8762.47
Note : Rates of all items should be inclusive of all supply and carriage. Page: 528 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
IT 4% of Total 428.39
Total: 10709.69
Subtotal-A: 9079.71
Formwork ( +10.00 % on Subtotal-A ) 907.97
Subtotal-A1: 9987.68
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 10187.43
Note : Rates of all items should be inclusive of all supply and carriage. Page: 529 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 8785.25
Formwork ( +10.00 % on Subtotal-A ) 878.53
Subtotal-A1: 9663.78
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 9857.05
Note : Rates of all items should be inclusive of all supply and carriage. Page: 530 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Total: 12047.51
Subtotal-A: 9713.01
Formwork ( +10.00 % on Subtotal-A ) 971.30
Subtotal-A1: 10684.31
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 10897.99
Note : Rates of all items should be inclusive of all supply and carriage. Page: 531 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 9418.55
Formwork ( +10.00 % on Subtotal-A ) 941.86
Subtotal-A1: 10360.41
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 10567.61
Note : Rates of all items should be inclusive of all supply and carriage. Page: 532 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Total: 12915.97
Note : Rates of all items should be inclusive of all supply and carriage. Page: 533 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 9915.37
Formwork ( +10.00 % on Subtotal-A ) 991.54
Subtotal-A1: 10906.91
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 11125.05
Note : Rates of all items should be inclusive of all supply and carriage. Page: 534 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Total: 13597.28
Note : Rates of all items should be inclusive of all supply and carriage. Page: 535 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 6974.54
Cost of foming sump, protective bunds, chiselling ( +5.00 % on Subtotal-A ) 348.73
and making arrangement for under water
concreting with tremie pipe.
Subtotal-A1: 7323.26
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 7469.73
Note : Rates of all items should be inclusive of all supply and carriage. Page: 536 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 8681.20
Cost of foming sump, protective bunds, chiselling ( +5.00 % on Subtotal-A ) 434.06
and making arrangement for under water
concreting with tremie pipe.
Subtotal-A1: 9115.26
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 9297.57
Note : Rates of all items should be inclusive of all supply and carriage. Page: 537 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Total: 11363.69
Note : Rates of all items should be inclusive of all supply and carriage. Page: 538 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 8160.67
Cost of foming sump, protective bunds, chiselling ( +5.00 % on Subtotal-A ) 408.03
and making arrangement for under water
concreting with tremie pipe.
Subtotal-A1: 8568.70
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 8740.07
Note : Rates of all items should be inclusive of all supply and carriage. Page: 539 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Note : Rates of all items should be inclusive of all supply and carriage. Page: 540 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 9779.88
Cost of foming sump, protective bunds, chiselling ( +5.00 % on Subtotal-A ) 488.99
and making arrangement for under water
concreting with tremie pipe.
Subtotal-A1: 10268.87
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 10474.25
Note : Rates of all items should be inclusive of all supply and carriage. Page: 541 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 9259.34
Cost of foming sump, protective bunds, chiselling ( +5.00 % on Subtotal-A ) 462.97
and making arrangement for under water
concreting with tremie pipe.
Subtotal-A1: 9722.31
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 9916.76
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Note : Rates of all items should be inclusive of all supply and carriage. Page: 543 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 10475.29
Cost of foming sump, protective bunds, chiselling ( +5.00 % on Subtotal-A ) 523.76
and making arrangement for under water
concreting with tremie pipe.
Subtotal-A1: 10999.05
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 11219.03
Note : Rates of all items should be inclusive of all supply and carriage. Page: 544 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 9862.97
Cost of foming sump, protective bunds, chiselling ( +5.00 % on Subtotal-A ) 493.15
and making arrangement for under water
concreting with tremie pipe.
Subtotal-A1: 10356.11
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 10563.24
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Note : Rates of all items should be inclusive of all supply and carriage. Page: 546 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 6974.54
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 7114.03
Note : Rates of all items should be inclusive of all supply and carriage. Page: 547 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 8681.20
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 8854.83
Note : Rates of all items should be inclusive of all supply and carriage. Page: 548 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 8160.67
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 8323.88
Note : Rates of all items should be inclusive of all supply and carriage. Page: 549 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Total: 10173.63
Subtotal-A: 9779.88
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 9975.48
Note : Rates of all items should be inclusive of all supply and carriage. Page: 550 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 9259.34
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 9444.53
Note : Rates of all items should be inclusive of all supply and carriage. Page: 551 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 6271.88
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 6397.32
Note : Rates of all items should be inclusive of all supply and carriage. Page: 552 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 8021.81
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 8182.24
Note : Rates of all items should be inclusive of all supply and carriage. Page: 553 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 7727.35
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 7881.90
Note : Rates of all items should be inclusive of all supply and carriage. Page: 554 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 9191.29
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 9375.11
Note : Rates of all items should be inclusive of all supply and carriage. Page: 555 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 8896.83
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 9074.77
Note : Rates of all items should be inclusive of all supply and carriage. Page: 556 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 6343.17
Formwork ( +4.00 % on Subtotal-A ) 253.73
Subtotal-A1: 6596.89
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 6728.83
Note : Rates of all items should be inclusive of all supply and carriage. Page: 557 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 8104.15
Formwork ( +3.75 % on Subtotal-A ) 303.91
Subtotal-A1: 8408.05
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 8576.21
Note : Rates of all items should be inclusive of all supply and carriage. Page: 558 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 7809.69
Formwork ( +3.75 % on Subtotal-A ) 292.86
Subtotal-A1: 8102.55
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 8264.60
Note : Rates of all items should be inclusive of all supply and carriage. Page: 559 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
IT 4% of Total 404.05
Total: 10101.18
Subtotal-A: 9079.71
Formwork ( +3.50 % on Subtotal-A ) 317.79
Subtotal-A1: 9397.50
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 9585.45
Note : Rates of all items should be inclusive of all supply and carriage. Page: 560 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 8785.25
Formwork ( +3.50 % on Subtotal-A ) 307.48
Subtotal-A1: 9092.73
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 9274.59
Note : Rates of all items should be inclusive of all supply and carriage. Page: 561 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Total: 11335.61
Subtotal-A: 9713.01
Formwork ( +3.00 % on Subtotal-A ) 291.39
Subtotal-A1: 10004.40
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 10204.48
Note : Rates of all items should be inclusive of all supply and carriage. Page: 562 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 9418.55
Formwork ( +3.00 % on Subtotal-A ) 282.56
Subtotal-A1: 9701.11
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 9895.13
Note : Rates of all items should be inclusive of all supply and carriage. Page: 563 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Total: 12094.05
Note : Rates of all items should be inclusive of all supply and carriage. Page: 564 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 9915.37
Formwork ( +3.00 % on Subtotal-A ) 297.46
Subtotal-A1: 10212.83
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 10417.09
Note : Rates of all items should be inclusive of all supply and carriage. Page: 565 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Total: 12732.00
4.08.06 Brick work with 1st class brick in specified cement mortar in staining of
wells with sand of minimum FM 1.50 and cement conforming to BDS EN
197-1 : 2003 CEM-II/A-L/M/V/W 42.5N, cutting bricks to required sizes,
cleaning and soaking bricks at least for 24 hours before use, hoisting
and keeping in position the MS bond rods and finished with flush
pointing joints, watering, etc. complete including cost of all materials
but excluding cost of MS bond rods and bottle nuts, etc. all complete as
per direction of the E-I-C.
Subtotal-A: 6294.90
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 6420.80
Note : Rates of all items should be inclusive of all supply and carriage. Page: 566 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 5976.70
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 6096.23
Note : Rates of all items should be inclusive of all supply and carriage. Page: 567 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Note : Rates of all items should be inclusive of all supply and carriage. Page: 568 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.09.01.01 For pile caps, abutment base of bridges and bottom slab of box culverts cum
Portland Composite Cement (CEM-II/A-L/M/V/W 42.5N) 6.0500 bag 430.00 2601.50
1st Class Picked Brick Chips (20mm down graded) 0.5200 m3 2940.00 1528.80
1st Class Brick Chips (10mm down graded) 0.3400 m3 3049.00 1036.66
Sand (FM - 1.8) 0.4300 m3 970.00 417.10
Head Mason 0.0800 day 650.00 52.00
Mason 0.4200 day 550.00 231.00
Skilled Labour 0.7500 day 450.00 337.50
Ordinary Labour 2.0000 day 370.00 740.00
H.C. of Concrete Mixture Machine (Capacity 0.40/ 0.28 cum) 0.0600 day 1200.00 72.00
Hire and running charges of Concrete Vibrator 0.0600 day 400.00 24.00
Subtotal-A: 7040.56
Formwork/ shuttering, prop with necessary ( +9.00 % on Subtotal-A ) 633.65
supports etc.
Subtotal-A1: 7674.21
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 7827.69
4.09.01.02 For diaphragm walls, wing walls, piers, columns, pier caps, abutments
of bridges and vertical members of box culverts
Note : Rates of all items should be inclusive of all supply and carriage. Page: 569 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 7040.56
Formwork ( +14.00 % on Subtotal-A ) 985.68
Subtotal-A1: 8026.24
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 8186.76
4.09.01.02.02 For height above 5m cum Add +25.00% with Item No 4.09.01.02.01
4.09.01.03 For solid slab type super-structure including cantilever, side walk, curb,
wheel guard of bridges
Note : Rates of all items should be inclusive of all supply and carriage. Page: 570 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 7040.56
Formwork/ shuttering, prop with necessary ( +40.00 % on Subtotal-A ) 2816.22
supports etc.
Subtotal-A1: 9856.78
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 10053.92
4.09.01.03.02 For height above 5m cum Add +12.50% with Item No 4.09.01.03.01
4.09.01.04 For T-girder & slab type super-structure including cross girders, side
walk, curb, wheel guard of bridges
Note : Rates of all items should be inclusive of all supply and carriage. Page: 571 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 7262.06
Formwork/ shuttering, prop with necessary ( +45.00 % on Subtotal-A ) 3267.93
supports etc.
Subtotal-A1: 10529.99
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 10740.59
4.09.01.04.02 For height above 5m cum Add +13.75% with Item No 4.09.01.04.01
4.09.01.05 For top slab including curb and wheel guard of box culvert
Note : Rates of all items should be inclusive of all supply and carriage. Page: 572 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 7040.56
Formwork/ shuttering, prop with necessary ( +28.00 % on Subtotal-A ) 1971.36
supports etc.
Subtotal-A1: 9011.92
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 9192.16
4.09.01.05.02 For height above 5m cum Add +6.00% with Item No 4.09.01.05.01
4.09.01.06 For cast-in-situ/ pre-cast railing and rail post of bridges and box culverts
Note : Rates of all items should be inclusive of all supply and carriage. Page: 573 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 7262.06
Formwork/ shuttering, prop with necessary ( +29.00 % on Subtotal-A ) 2106.00
supports etc.
Subtotal-A1: 9368.06
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 9555.42
Note : Rates of all items should be inclusive of all supply and carriage. Page: 574 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 7262.06
Formwork/ shuttering, prop with necessary ( +14.00 % on Subtotal-A ) 1016.69
supports etc.
Subtotal-A1: 8278.75
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 8444.32
Note : Rates of all items should be inclusive of all supply and carriage. Page: 575 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Note : Rates of all items should be inclusive of all supply and carriage. Page: 576 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.09.02.01 For pile caps, abutment base of bridges and bottom slab of Box Culvert cum
Portland Composite Cement (CEM-II/A-L/M/V/W 42.5N) 6.0500 bag 430.00 2601.50
Stone Chips (20mm down graded) [LAA≤35] 0.5200 cum 4930.00 2563.60
Stone Chips (12mm down graded) [LAA≤25] 0.3400 cum 4640.00 1577.60
Sand (FM - 2.5) 0.2580 m3 1500.00 387.00
Sand (FM - 1.8) 0.1720 m3 970.00 166.84
Water reducing chemical admixture : Type-A 1.2100 liter 130.00 157.30
Head Mason 0.0800 day 650.00 52.00
Mason 0.4200 day 550.00 231.00
Skilled Labour 0.7500 day 450.00 337.50
Ordinary Labour 2.0000 day 370.00 740.00
H.C. of Concrete Mixture Machine (Capacity 0.40/ 0.28 cum) 0.0600 day 1200.00 72.00
Hire and running charges of Concrete Vibrator 0.0600 day 400.00 24.00
Subtotal-A: 8910.34
Steel Formwork/ shuttering, prop with necessary ( +9.00 % on Subtotal-A ) 801.93
supports etc.
Subtotal-A1: 9712.27
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 9906.52
4.09.02.02 For diaphragm walls, wing walls, piers, columns, abutments of bridges
and vertical members of box culverts
Note : Rates of all items should be inclusive of all supply and carriage. Page: 577 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 8801.54
Steel Formwork/ shuttering, prop with necessary ( +14.00 % on Subtotal-A ) 1232.22
supports etc.
Subtotal-A1: 10033.76
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 10234.43
4.09.02.02.02 For height above 5m to 10m cum Add +25.00% with Item No 4.09.02.02.01
4.09.02.02.03 For height above 10m to 15m cum Add +50.00% with Item No 4.09.02.02.01
4.09.02.02.04 For height above 15m to 20m cum Add +75.00% with Item No 4.09.02.02.01
Note : Rates of all items should be inclusive of all supply and carriage. Page: 578 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.09.02.02.05 For height above 20m cum Add +80.00% with Item No 4.09.02.02.01
4.09.02.03 For solid slab type super-structure including cantilever, side walk, curb,
wheel guard of bridges
Subtotal-A: 8801.54
Steel Formwork/ shuttering, prop with necessary ( +40.00 % on Subtotal-A ) 3520.62
supports etc.
Subtotal-A1: 12322.16
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 12568.60
Note : Rates of all items should be inclusive of all supply and carriage. Page: 579 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.09.02.03.02 For height above 5m to 10m cum Add +12.50% with Item No 4.09.02.03.01
4.09.02.03.03 For height above 10m to 15m cum Add +25.00% with Item No 4.09.02.03.01
4.09.02.03.04 For height above 15m to 20m cum Add +37.50% with Item No 4.09.02.03.01
4.09.02.03.05 For height above 20m cum Add +40.00% with Item No 4.09.02.03.01
4.09.02.04 For T-girder & slab type super-structure including cross girders, side
walk, curb, wheel guard of bridges
Note : Rates of all items should be inclusive of all supply and carriage. Page: 580 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 9023.04
Steel Formwork/ shuttering, prop with necessary ( +45.00 % on Subtotal-A ) 4060.37
supports etc.
Subtotal-A1: 13083.41
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 13345.08
4.09.02.04.02 For height above 5m to 10m cum Add +13.75% with Item No 4.09.02.04.01
4.09.02.04.03 For height above 10m to 15m cum Add +27.50% with Item No 4.09.02.04.01
4.09.02.04.04 For height above 15m to 20m cum Add +41.25% with Item No 4.09.02.04.01
Note : Rates of all items should be inclusive of all supply and carriage. Page: 581 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.09.02.04.05 For height above 20m cum Add +44.00% with Item No 4.09.02.04.01
4.09.02.05 For top slab including curb and wheel guard of box culvert
Subtotal-A: 8801.54
Steel Formwork/ shuttering, prop with necessary ( +28.00 % on Subtotal-A ) 2464.43
supports etc.
Subtotal-A1: 11265.97
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 11491.29
4.09.02.05.02 For height above 5m cum Add +6.00% with Item No 4.09.02.05.01
Note : Rates of all items should be inclusive of all supply and carriage. Page: 582 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.09.02.06 For cast-in-situ/ pre-cast railing & rail post of bridges and box culverts
Subtotal-A: 8705.84
Steel Formwork/ shuttering, prop with necessary ( +29.00 % on Subtotal-A ) 2524.69
supports etc.
Subtotal-A1: 11230.53
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 11455.14
Note : Rates of all items should be inclusive of all supply and carriage. Page: 583 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 8705.84
Steel Formwork/ shuttering, prop with necessary ( +14.00 % on Subtotal-A ) 1218.82
supports etc.
Subtotal-A1: 9924.66
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 10123.15
Note : Rates of all items should be inclusive of all supply and carriage. Page: 584 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Note : Rates of all items should be inclusive of all supply and carriage. Page: 585 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.09.03.01 For pile caps, abutment base, facing elements of Reinforced/ cum
Mechanically Stabilized Earth Structure, bottom slab of Box Culvert etc.
Portland Composite Cement (CEM-II/A-L/M/V/W 42.5N) 7.7100 bag 430.00 3315.30
Stone Chips (20mm down graded) [LAA≤30] 0.4900 m3 5320.00 2606.80
Stone Chips (12mm down graded) [LAA≤30] 0.3300 m3 4470.00 1475.10
Sand (FM - 2.5) 0.4100 m3 1500.00 615.00
Water-reducing high range chemical admixture : Type-F 1.9275 liter 160.00 308.40
Head Mason 0.0800 day 650.00 52.00
Mason 0.4200 day 550.00 231.00
Skilled Labour 0.7500 day 450.00 337.50
Ordinary Labour 2.0000 day 370.00 740.00
H.C. of Concrete Mixture Machine (Capacity 0.40/ 0.28 cum) 0.0600 day 1200.00 72.00
Hire and running charges of Concrete Vibrator 0.0600 day 400.00 24.00
Subtotal-A: 9777.10
Steel Formwork/ shuttering, prop with necessary ( +9.00 % on Subtotal-A ) 879.94
supports etc.
Subtotal-A1: 10657.04
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 10870.18
4.09.03.02 For diaphragm walls, wing walls, piers, columns, projected pile cap
above water level, pier caps, abutments of bridges and vertical
members of box culverts
Note : Rates of all items should be inclusive of all supply and carriage. Page: 586 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 9777.10
Steel Formwork/ shuttering, prop with necessary ( +14.00 % on Subtotal-A ) 1368.79
supports etc.
Subtotal-A1: 11145.89
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 11368.81
4.09.03.02.02 For height above 5m to 10m cum Add +25.00% with Item No 4.09.03.02.01
4.09.03.02.03 For height above 10m to 15m cum Add +50.00% with Item No 4.09.03.02.01
4.09.03.02.04 For height above 15m to 20m cum Add +75.00% with Item No 4.09.03.02.01
Note : Rates of all items should be inclusive of all supply and carriage. Page: 587 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.09.03.02.05 For height above 20m cum Add +80.00% with Item No 4.09.03.02.01
4.09.03.03 For solid slab type super-structure including cantilever, side walk, curb
and wheel guard of bridges
Subtotal-A: 9777.10
Steel Formwork/ shuttering, prop with necessary ( +55.00 % on Subtotal-A ) 5377.41
supports etc.
Subtotal-A1: 15154.51
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 15457.60
4.09.03.03.02 For height above 5m to 10m cum Add +11.00% with Item No 4.09.03.03.01
Note : Rates of all items should be inclusive of all supply and carriage. Page: 588 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.09.03.03.03 For height above 10m to 15m cum Add +22.00% with Item No 4.09.03.03.01
4.09.03.03.04 For height above 15 m to 20 m cum Add +33.00% with Item No 4.09.03.03.01
4.09.03.03.05 For height above 20m cum Add +44.00% with Item No 4.09.03.03.01
4.09.03.04 For T-girder & slab type super-structure including cross girders, side
walk, curb and wheel guard of bridges
Note : Rates of all items should be inclusive of all supply and carriage. Page: 589 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 9998.60
Steel Formwork/ shuttering, prop with necessary ( +60.00 % on Subtotal-A ) 5999.16
supports etc.
Subtotal-A1: 15997.76
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 16317.72
4.09.03.04.02 For height above 5m to 10m cum Add +7.50% with Item No 4.09.03.04.01
4.09.03.04.03 For height above 10m to 15m cum Add +15.00% with Item No 4.09.03.04.01
4.09.03.04.04 For height above 15m to 20m cum Add +22.50% with Item No 4.09.03.04.01
Note : Rates of all items should be inclusive of all supply and carriage. Page: 590 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.09.03.04.05 For height above 20m cum Add +30.00% with Item No 4.09.03.04.01
4.09.03.05 For top slab including curb and wheel guard of box culvert
Subtotal-A: 9777.10
Steel Formwork/ shuttering, prop with necessary ( +30.00 % on Subtotal-A ) 2933.13
supports etc.
Subtotal-A1: 12710.23
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 12964.43
4.09.03.05.02 For height above 5m cum Add +6.00% with Item No 4.09.03.05.01
Note : Rates of all items should be inclusive of all supply and carriage. Page: 591 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 10163.60
Steel Formwork/ shuttering, prop with necessary ( +65.00 % on Subtotal-A ) 6606.34
supports etc.
Subtotal-A1: 16769.94
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 17105.34
4.09.03.06.02 For height above 5m to 10m cum Add +12.50% with Item No 4.09.03.06.01
4.09.03.06.03 For height above 10m to 15m cum Add +25.00% with Item No 4.09.03.06.01
Note : Rates of all items should be inclusive of all supply and carriage. Page: 592 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.09.03.06.04 For height above 15m to 20m cum Add +37.50% with Item No 4.09.03.06.01
4.09.03.06.05 For height above 20m cum Add +40.00% with Item No 4.09.03.06.01
4.09.03.07 For RCC deck slab/Cross girder/diaphragm supported on PSC Girder cum
using suspended type staging/ centering and shuttering for any height
Portland Composite Cement (CEM-II/A-L/M/V/W 42.5N) 7.7100 bag 430.00 3315.30
Stone Chips (20mm down graded) [LAA≤30] 0.4900 m3 5320.00 2606.80
Stone Chips (12mm down graded) [LAA≤30] 0.3300 m3 4470.00 1475.10
Sand (FM - 2.5) 0.4100 m3 1500.00 615.00
Water-reducing high range chemical admixture : Type-F 1.9275 liter 160.00 308.40
Head Mason 0.0800 day 650.00 52.00
Mason 0.4200 day 550.00 231.00
Skilled Labour 0.7500 day 450.00 337.50
Ordinary Labour 2.0000 day 370.00 740.00
H.C. of Concrete Mixture Machine (Capacity 0.40/ 0.28 cum) 0.0600 day 1200.00 72.00
Hire and running charges of Concrete Vibrator 0.0600 day 400.00 24.00
Subtotal-A: 9777.10
Steel Formwork/ shuttering, prop with necessary ( +60.00 % on Subtotal-A ) 5866.26
supports etc.
Subtotal-A1: 15643.36
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 15956.23
4.09.03.08 For cast-in-situ/ pre-cast railing and rail post of bridges & culverts
Note : Rates of all items should be inclusive of all supply and carriage. Page: 593 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 9582.10
Steel Formwork/ shuttering, prop with necessary ( +29.00 % on Subtotal-A ) 2778.81
supports etc.
Subtotal-A1: 12360.91
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 12608.13
Note : Rates of all items should be inclusive of all supply and carriage. Page: 594 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 9582.10
Steel Formwork/ shuttering, prop with necessary ( +14.00 % on Subtotal-A ) 1341.49
supports etc.
Subtotal-A1: 10923.59
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 11142.07
Note : Rates of all items should be inclusive of all supply and carriage. Page: 595 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 9777.10
Steel Formwork/ shuttering, prop with necessary ( +9.00 % on Subtotal-A ) 879.94
supports etc.
Subtotal-A1: 10657.04
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 10870.18
Note : Rates of all items should be inclusive of all supply and carriage. Page: 596 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Note : Rates of all items should be inclusive of all supply and carriage. Page: 597 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.09.04.01 For pile caps, abutment base, facing elements of Reinforced/ cum
Mechanically Stabilized Earth Structure, bottom slab of Box Culvert etc.
Portland Composite Cement (CEM-II/A-L/M/V/W 42.5N) 7.7100 bag 430.00 3315.30
Stone Chips (20mm down graded) [LAA≤30] 0.4900 m3 5320.00 2606.80
Stone Chips (12mm down graded) [LAA≤30] 0.3300 m3 4470.00 1475.10
Sand (FM - 2.5) 0.4100 m3 1500.00 615.00
Water-reducing high range chemical admixture : Type-F 1.9275 liter 160.00 308.40
Head Mason 0.0800 day 650.00 52.00
Mason 0.4200 day 550.00 231.00
Skilled Labour 0.5000 day 450.00 225.00
Ordinary Labour 1.5000 day 370.00 555.00
Hire and running charges of Batching and Mixing Plant @ 20 0.0063 day 23000.00 144.90
cum/hour
H.C. of Generator (100 KVA) 0.0063 day 3500.00 22.05
H.C. of Backhoe End Loader (6 tons) 0.0063 day 6000.00 37.80
H.C. of Transit Mixer 4.0/4.5 cum capacity including fuel & 0.0200 day 10000.00 200.00
other related cost
Hire and running charges of Concrete Pump (30 & 45 cum 0.0063 day 5000.00 31.50
capacity)
Hire and running charges of Concrete Vibrator 0.0600 day 400.00 24.00
Subtotal-A: 9843.85
Steel Formwork/ shuttering, prop with necessary ( +9.00 % on Subtotal-A ) 885.95
supports etc.
Subtotal-A1: 10729.80
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 10944.39
Note : Rates of all items should be inclusive of all supply and carriage. Page: 598 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Total: 13376.48
4.09.04.02 For diaphragm walls, wing walls, piers, columns, projected pile cap
above water level, pier caps, abutments of bridges and vertical
members of box culverts
Note : Rates of all items should be inclusive of all supply and carriage. Page: 599 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 9843.85
Steel Formwork/ shuttering, prop with necessary ( +14.00 % on Subtotal-A ) 1378.14
supports etc.
Subtotal-A1: 11221.99
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 11446.43
Note : Rates of all items should be inclusive of all supply and carriage. Page: 600 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Total: 13990.08
4.09.04.02.02 For height above 5m to 10m cum Add +25.00% with Item No 4.09.04.02.01
4.09.04.02.03 For height above 10m to 15m cum Add +50.00% with Item No 4.09.04.02.01
4.09.04.02.04 For height above 15m to 20m cum Add +75.00% with Item No 4.09.04.02.01
4.09.04.02.05 For height above 20m cum Add +80.00% with Item No 4.09.04.02.01
4.09.04.03 For solid slab type super-structure including cantilever, side walk, curb
and wheel guard of bridges
Note : Rates of all items should be inclusive of all supply and carriage. Page: 601 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 9843.85
Steel Formwork/ shuttering, prop with necessary ( +55.00 % on Subtotal-A ) 5414.12
supports etc.
Subtotal-A1: 15257.97
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 15563.13
Note : Rates of all items should be inclusive of all supply and carriage. Page: 602 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Total: 19021.60
4.09.04.03.02 For height above 5m to 10m cum Add +11.00% with Item No 4.09.04.03.01
4.09.04.03.03 For height above 10m to 15m cum Add +22.00% with Item No 4.09.04.03.01
4.09.04.03.04 For height above 15m to 20m cum Add +33.00% with Item No 4.09.04.03.01
4.09.04.03.05 For height above 20m cum Add +44.00% with Item No 4.09.04.03.01
4.09.04.04 For T-girder & slab type super-structure including cross girders, side
walk, curb and wheel guard of bridges
Note : Rates of all items should be inclusive of all supply and carriage. Page: 603 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 10065.35
Steel Formwork/ shuttering, prop with necessary ( +60.00 % on Subtotal-A ) 6039.21
supports etc.
Subtotal-A1: 16104.56
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 16426.65
Note : Rates of all items should be inclusive of all supply and carriage. Page: 604 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Total: 20077.02
4.09.04.04.02 For height above 5m to 10m cum Add +7.50% with Item No 4.09.04.04.01
4.09.04.04.03 For height above 10m to 15m cum Add +15.00% with Item No 4.09.04.04.01
4.09.04.04.04 For height above 15m to 20m cum Add +22.50% with Item No 4.09.04.04.01
4.09.04.04.05 For height above 20m cum Add +30.00% with Item No 4.09.04.04.01
4.09.04.05 For top slab including curb and wheel guard of box culvert
Note : Rates of all items should be inclusive of all supply and carriage. Page: 605 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 9843.85
Steel Formwork/ shuttering, prop with necessary ( +30.00 % on Subtotal-A ) 2953.16
supports etc.
Subtotal-A1: 12797.01
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 13052.95
Note : Rates of all items should be inclusive of all supply and carriage. Page: 606 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Total: 15953.60
4.09.04.05.02 For height above 5m cum Add +6.00% with Item No 4.09.04.05.01
Note : Rates of all items should be inclusive of all supply and carriage. Page: 607 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 10230.35
Steel Formwork/ shuttering, prop with necessary ( +65.00 % on Subtotal-A ) 6649.73
supports etc.
Subtotal-A1: 16880.08
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 17217.68
Note : Rates of all items should be inclusive of all supply and carriage. Page: 608 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Total: 21043.83
4.09.04.06.02 For height above 5m to 10m cum Add +12.50% with Item No 4.09.04.06.01
4.09.04.06.03 For height above 10m to 15m cum Add +25.00% with Item No 4.09.04.06.01
4.09.04.06.04 For height above 15m to 20m cum Add +37.50% with Item No 4.09.04.06.01
4.09.04.06.05 For height above 20m cum Add +40.00% with Item No 4.09.04.06.01
Note : Rates of all items should be inclusive of all supply and carriage. Page: 609 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.09.04.07 For RCC deck slab/Cross girder/diaphragm supported on PSC Girder cum
using suspended type staging/ centering and shuttering for any height
Portland Composite Cement (CEM-II/A-L/M/V/W 42.5N) 7.7100 bag 430.00 3315.30
Stone Chips (20mm down graded) [LAA≤30] 0.4900 m3 5320.00 2606.80
Stone Chips (12mm down graded) [LAA≤30] 0.3300 m3 4470.00 1475.10
Sand (FM - 2.5) 0.4100 m3 1500.00 615.00
Water-reducing high range chemical admixture : Type-F 1.9275 liter 160.00 308.40
Head Mason 0.0800 day 650.00 52.00
Mason 0.4200 day 550.00 231.00
Skilled Labour 0.5000 day 450.00 225.00
Ordinary Labour 1.5000 day 370.00 555.00
Hire and running charges of Batching and Mixing Plant @ 20 0.0063 day 23000.00 144.90
cum/hour
H.C. of Generator (100 KVA) 0.0063 day 3500.00 22.05
H.C. of Backhoe End Loader (6 tons) 0.0063 day 6000.00 37.80
H.C. of Transit Mixer 4.0/4.5 cum capacity including fuel & 0.0200 day 10000.00 200.00
other related cost
Hire and running charges of Concrete Pump (30 & 45 cum 0.0063 day 5000.00 31.50
capacity)
Hire and running charges of Concrete Vibrator 0.0600 day 400.00 24.00
Subtotal-A: 9843.85
Steel Formwork/ shuttering, prop with necessary ( +60.00 % on Subtotal-A ) 5906.31
supports etc.
Subtotal-A1: 15750.16
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 16065.16
Note : Rates of all items should be inclusive of all supply and carriage. Page: 610 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Total: 19635.20
4.09.04.08 For cast-in-situ/ pre-cast railing and rail post of bridges & culverts
Note : Rates of all items should be inclusive of all supply and carriage. Page: 611 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 9648.85
Steel Formwork/ shuttering, prop with necessary ( +29.00 % on Subtotal-A ) 2798.17
supports etc.
Subtotal-A1: 12447.02
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 12695.96
Note : Rates of all items should be inclusive of all supply and carriage. Page: 612 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 9648.85
Steel Formwork/ shuttering, prop with necessary ( +14.00 % on Subtotal-A ) 1350.84
supports etc.
Subtotal-A1: 10999.69
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 11219.68
Note : Rates of all items should be inclusive of all supply and carriage. Page: 613 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 9843.85
Steel Formwork/ shuttering, prop with necessary ( +9.00 % on Subtotal-A ) 885.95
supports etc.
Subtotal-A1: 10729.80
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 10944.39
Note : Rates of all items should be inclusive of all supply and carriage. Page: 614 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Total: 13376.48
Note : Rates of all items should be inclusive of all supply and carriage. Page: 615 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.09.05.01 For foundation of Pier & Abutment of Bridges and Box Culverts cum
Ordinary Portland Cement (CEM I, 52.5N) 8.6000 bag 455.00 3913.00
Stone Chips (20mm down graded) [LAA≤30] 0.4900 m3 5320.00 2606.80
Stone Chips (12mm down graded) [LAA≤30] 0.3300 m3 4470.00 1475.10
Sand (FM - 2.5) 0.4100 m3 1500.00 615.00
Water-reducing high range chemical admixture : Type-F 2.1500 liter 160.00 344.00
Head Mason 0.0800 day 650.00 52.00
Mason 0.4200 day 550.00 231.00
Skilled Labour 0.7500 day 450.00 337.50
Ordinary Labour 2.0000 day 370.00 740.00
H.C. of Concrete Mixture Machine (Capacity 0.40/ 0.28 cum) 0.0600 day 1200.00 72.00
Hire and running charges of Concrete Vibrator 0.0600 day 400.00 24.00
Subtotal-A: 10410.40
Steel Formwork/ shuttering, prop with necessary ( +9.00 % on Subtotal-A ) 936.94
supports etc.
Subtotal-A1: 11347.34
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 11574.28
4.09.05.02 For diaphragm walls, wing walls, piers, columns, projected pile cap
above water level, pier caps, abutments of bridges and vertical
members of box culverts
Note : Rates of all items should be inclusive of all supply and carriage. Page: 616 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 10410.40
Steel Formwork/ shuttering, prop with necessary ( +14.00 % on Subtotal-A ) 1457.46
supports etc.
Subtotal-A1: 11867.86
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 12105.21
4.09.05.02.02 For height above 5m to 10m cum Add +25.00% with Item No 4.09.05.02.01
4.09.05.02.03 For height above 10m to 15m cum Add +50.00% with Item No 4.09.05.02.01
4.09.05.02.04 For height above 15m to 20m cum Add +75.00% with Item No 4.09.05.02.01
Note : Rates of all items should be inclusive of all supply and carriage. Page: 617 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.09.05.02.05 For height above 20m cum Add +80.00% with Item No 4.09.05.02.01
4.09.05.03 For solid slab type super-structure including cantilever, side walk, curb
and wheel guard of bridges
Subtotal-A: 10410.40
Steel Formwork/ shuttering, prop with necessary ( +55.00 % on Subtotal-A ) 5725.72
supports etc.
Subtotal-A1: 16136.12
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 16458.84
4.09.05.03.02 For height above 5m to 10m cum Add +11.00% with Item No 4.09.05.03.01
Note : Rates of all items should be inclusive of all supply and carriage. Page: 618 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.09.05.03.03 For height above 10m to 15m cum Add +22.00% with Item No 4.09.05.03.01
4.09.05.03.04 For height above 15m to 20m cum Add +33.00% with Item No 4.09.05.03.01
4.09.05.03.05 For height above 20m cum Add +44.00% with Item No 4.09.05.03.01
4.09.05.04 For T-girder & slab type super-structure including cross girders, side
walk, curb and wheel guard of bridges
Note : Rates of all items should be inclusive of all supply and carriage. Page: 619 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 10631.90
Steel Formwork/ shuttering, prop with necessary ( +60.00 % on Subtotal-A ) 6379.14
supports etc.
Subtotal-A1: 17011.04
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 17351.26
4.09.05.04.02 For height above 5m to 10m cum Add +7.50% with Item No 4.09.05.04.01
4.09.05.04.03 For height above 10m to 15m cum Add +15.00% with Item No 4.09.05.04.01
4.09.05.04.04 For height above 15m to 20m cum Add +22.50% with Item No 4.09.05.04.01
Note : Rates of all items should be inclusive of all supply and carriage. Page: 620 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.09.05.04.05 For height above 20m cum Add +30.00% with Item No 4.09.05.04.01
4.09.05.05 For top slab including curb and wheel guard of box culvert
Subtotal-A: 10410.40
Steel Formwork/ shuttering, prop with necessary ( +30.00 % on Subtotal-A ) 3123.12
supports etc.
Subtotal-A1: 13533.52
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 13804.19
4.09.05.05.02 For height above 5m cum Add +6.00% with Item No 4.09.05.05.01
Note : Rates of all items should be inclusive of all supply and carriage. Page: 621 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 10684.40
Steel Formwork/ shuttering, prop with necessary ( +65.00 % on Subtotal-A ) 6944.86
supports etc.
Subtotal-A1: 17629.26
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 17981.85
4.09.05.06.02 For height above 5m to 10m cum Add +12.50% with Item No 4.09.05.06.01
4.09.05.06.03 For height above 10m to 15m cum Add +25.00% with Item No 4.09.05.06.01
Note : Rates of all items should be inclusive of all supply and carriage. Page: 622 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.09.05.06.04 For height above 15m to 20m cum Add +37.50% with Item No 4.09.05.06.01
4.09.05.06.05 For height above 20m cum Add +40.00% with Item No 4.09.05.06.01
4.09.05.07 For RCC deck slab/Cross girder/diaphragm supported on PSC Girder cum
using suspended type staging/ centering and shuttering for any height
Ordinary Portland Cement (CEM I, 52.5N) 8.6000 bag 455.00 3913.00
Stone Chips (20mm down graded) [LAA≤30] 0.4900 m3 5320.00 2606.80
Stone Chips (12mm down graded) [LAA≤30] 0.3300 m3 4470.00 1475.10
Sand (FM - 2.5) 0.4100 m3 1500.00 615.00
Water-reducing high range chemical admixture : Type-F 2.1500 liter 160.00 344.00
Head Mason 0.0800 day 650.00 52.00
Mason 0.4200 day 550.00 231.00
Skilled Labour 0.7500 day 450.00 337.50
Ordinary Labour 2.0000 day 370.00 740.00
H.C. of Concrete Mixture Machine (Capacity 0.40/ 0.28 cum) 0.0600 day 1200.00 72.00
Hire and running charges of Concrete Vibrator 0.0600 day 400.00 24.00
Subtotal-A: 10410.40
Steel Formwork/ shuttering, prop with necessary ( +60.00 % on Subtotal-A ) 6246.24
supports etc.
Subtotal-A1: 16656.64
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 16989.77
4.09.05.08 For cast-in-situ/ pre-cast railing and rail post of bridges & box culverts
Note : Rates of all items should be inclusive of all supply and carriage. Page: 623 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 10215.40
Steel Formwork/ shuttering, prop with necessary ( +29.00 % on Subtotal-A ) 2962.47
supports etc.
Subtotal-A1: 13177.87
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 13441.42
Note : Rates of all items should be inclusive of all supply and carriage. Page: 624 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 10215.40
Steel Formwork/ shuttering, prop with necessary ( +14.00 % on Subtotal-A ) 1430.16
supports etc.
Subtotal-A1: 11645.56
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 11878.47
Note : Rates of all items should be inclusive of all supply and carriage. Page: 625 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 10410.40
Steel Formwork/ shuttering, prop with necessary ( +9.00 % on Subtotal-A ) 936.94
supports etc.
Subtotal-A1: 11347.34
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 11574.28
Note : Rates of all items should be inclusive of all supply and carriage. Page: 626 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Note : Rates of all items should be inclusive of all supply and carriage. Page: 627 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.09.06.01 For foundation of Pier & Abutment of Bridges and Facing Elements of cum
Reinforced/ Mechanically Stabilized Earth Structure
Ordinary Portland Cement (CEM I, 52.5N) 8.6000 bag 455.00 3913.00
Stone Chips (20mm down graded) [LAA≤30] 0.4900 m3 5320.00 2606.80
Stone Chips (12mm down graded) [LAA≤30] 0.3300 m3 4470.00 1475.10
Sand (FM - 2.5) 0.4100 m3 1500.00 615.00
Water-reducing high range chemical admixture : Type-F 2.1500 liter 160.00 344.00
Head Mason 0.0800 day 650.00 52.00
Mason 0.4200 day 550.00 231.00
Skilled Labour 0.5000 day 450.00 225.00
Ordinary Labour 1.5000 day 370.00 555.00
Hire and running charges of Batching and Mixing Plant @ 20 0.0063 day 23000.00 144.90
cum/hour
H.C. of Generator (100 KVA) 0.0063 day 3500.00 22.05
H.C. of Backhoe End Loader (6 tons) 0.0063 day 6000.00 37.80
H.C. of Transit Mixer 4.0/4.5 cum capacity including fuel & 0.0200 day 10000.00 200.00
other related cost
Hire and running charges of Concrete Pump (30 & 45 cum 0.0063 day 5000.00 31.50
capacity)
Hire and running charges of Concrete Vibrator 0.0600 day 400.00 24.00
Subtotal-A: 10477.15
Steel Formwork/ shuttering, prop with necessary ( +9.00 % on Subtotal-A ) 942.94
supports etc.
Subtotal-A1: 11420.09
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 11648.50
Note : Rates of all items should be inclusive of all supply and carriage. Page: 628 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Total: 14237.05
4.09.06.02 For diaphragm walls, wing walls, piers, columns, projected pile cap
above water level, pier caps, abutments of bridges
Note : Rates of all items should be inclusive of all supply and carriage. Page: 629 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 10477.15
Steel Formwork/ shuttering, prop with necessary ( +14.00 % on Subtotal-A ) 1466.80
supports etc.
Subtotal-A1: 11943.95
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 12182.83
Note : Rates of all items should be inclusive of all supply and carriage. Page: 630 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Total: 14890.13
4.09.06.02.02 For height above 5m to 10m cum Add +25.00% with Item No 4.09.06.02.01
4.09.06.02.03 For height above 10m to 15m cum Add +50.00% with Item No 4.09.06.02.01
4.09.06.02.04 For height above 15m to 20m cum Add +75.00% with Item No 4.09.06.02.01
4.09.06.02.05 For height above 20m cum Add +80.00% with Item No 4.09.06.02.01
4.09.06.03 For solid slab type super-structure including cantilever, side walk, curb
and wheel guard of bridges
Note : Rates of all items should be inclusive of all supply and carriage. Page: 631 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 10477.15
Steel Formwork/ shuttering, prop with necessary ( +55.00 % on Subtotal-A ) 5762.43
supports etc.
Subtotal-A1: 16239.58
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 16564.37
Note : Rates of all items should be inclusive of all supply and carriage. Page: 632 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Total: 20245.35
4.09.06.03.02 For height above 5m to 10m cum Add +10.00% with Item No 4.09.06.03.01
4.09.06.03.03 For height above 10m to 15m cum Add +20.00% with Item No 4.09.06.03.01
4.09.06.03.04 For height above 15m to 20m cum Add +30.00% with Item No 4.09.06.03.01
4.09.06.03.05 For height above 20m cum Add +40.00% with Item No 4.09.06.03.01
4.09.06.04 For T-girder & slab type super-structure including cross girders, side
walk, curb and wheel guard of bridges
Note : Rates of all items should be inclusive of all supply and carriage. Page: 633 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 10698.65
Steel Formwork/ shuttering, prop with necessary ( +60.00 % on Subtotal-A ) 6419.19
supports etc.
Subtotal-A1: 17117.84
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 17460.20
Note : Rates of all items should be inclusive of all supply and carriage. Page: 634 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Total: 21340.24
4.09.06.04.02 For height above 5m to 10m cum Add +6.50% with Item No 4.09.06.04.01
4.09.06.04.03 For height above 10m to 15m cum Add +13.00% with Item No 4.09.06.04.01
4.09.06.04.04 For height above 15m to 20m cum Add +19.50% with Item No 4.09.06.04.01
4.09.06.04.05 For height above 20m cum Add +26.00% with Item No 4.09.06.04.01
4.09.06.05 For top slab including curb and wheel guard of box culvert
Note : Rates of all items should be inclusive of all supply and carriage. Page: 635 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 10477.15
Steel Formwork/ shuttering, prop with necessary ( +30.00 % on Subtotal-A ) 3143.15
supports etc.
Subtotal-A1: 13620.30
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 13892.70
Note : Rates of all items should be inclusive of all supply and carriage. Page: 636 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Total: 16979.97
4.09.06.05.02 For height above 5m cum Add +5.50% with Item No 4.09.06.05.01
Note : Rates of all items should be inclusive of all supply and carriage. Page: 637 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 10863.65
Steel Formwork/ shuttering, prop with necessary ( +62.50 % on Subtotal-A ) 6789.78
supports etc.
Subtotal-A1: 17653.43
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 18006.50
Note : Rates of all items should be inclusive of all supply and carriage. Page: 638 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Total: 22007.94
4.09.06.06.02 For height above 5m to 10m cum Add +12.50% with Item No 4.09.06.06.01
4.09.06.06.03 For height above 10m to 15m cum Add +25.00% with Item No 4.09.06.06.01
4.09.06.06.04 For height above 15m to 20m cum Add +37.50% with Item No 4.09.06.06.01
4.09.06.06.05 For height above 20m cum Add +40.00% with Item No 4.09.06.06.01
Note : Rates of all items should be inclusive of all supply and carriage. Page: 639 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.09.06.07 For RCC deck slab/Cross girder/diaphragm supported on PSC Girder cum
using suspended type staging/ centering and shuttering for any height
Ordinary Portland Cement (CEM I, 52.5N) 8.6000 bag 455.00 3913.00
Stone Chips (20mm down graded) [LAA≤30] 0.4900 m3 5320.00 2606.80
Stone Chips (12mm down graded) [LAA≤30] 0.3300 m3 4470.00 1475.10
Sand (FM - 2.5) 0.4100 m3 1500.00 615.00
Water-reducing high range chemical admixture : Type-F 2.1500 liter 160.00 344.00
Head Mason 0.0800 day 650.00 52.00
Mason 0.4200 day 550.00 231.00
Skilled Labour 0.5000 day 450.00 225.00
Ordinary Labour 1.5000 day 370.00 555.00
Hire and running charges of Batching and Mixing Plant @ 20 0.0063 day 23000.00 144.90
cum/hour
H.C. of Generator (100 KVA) 0.0063 day 3500.00 22.05
H.C. of Backhoe End Loader (6 tons) 0.0063 day 6000.00 37.80
H.C. of Transit Mixer 4.0/4.5 cum capacity including fuel & 0.0200 day 10000.00 200.00
other related cost
Hire and running charges of Concrete Pump (30 & 45 cum 0.0063 day 5000.00 31.50
capacity)
Hire and running charges of Concrete Vibrator 0.0600 day 400.00 24.00
Subtotal-A: 10477.15
Steel Formwork/ shuttering, prop with necessary ( +60.00 % on Subtotal-A ) 6286.29
supports etc.
Subtotal-A1: 16763.44
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 17098.71
Note : Rates of all items should be inclusive of all supply and carriage. Page: 640 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Total: 20898.42
Note : Rates of all items should be inclusive of all supply and carriage. Page: 641 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 10863.65
Steel Formwork/ shuttering, prop with necessary ( +65.00 % on Subtotal-A ) 7061.37
supports etc.
Subtotal-A1: 17925.02
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 18283.52
Note : Rates of all items should be inclusive of all supply and carriage. Page: 642 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Total: 22346.53
4.09.06.08.02 For height above 5m to 10m cum Add +12.50% with Item No 4.09.06.08.01
4.09.06.08.03 For height above 10m to 15m cum Add +25.00% with Item No 4.09.06.08.01
4.09.06.08.04 For height above 15m to 20m cum Add +37.50% with Item No 4.09.06.08.01
4.09.06.08.05 For height above 20m cum Add +40.00% with Item No 4.09.06.08.01
Note : Rates of all items should be inclusive of all supply and carriage. Page: 643 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.09.07.01 For foundation of Pier & Abutment of Bridges and Facing Elements of cum
Reinforced/ Mechanically Stabilized Earth Structure
Ordinary Portland Cement (CEM I, 52.5N) 9.0000 bag 455.00 4095.00
Stone Chips (20mm down graded) [LAA≤25] 0.4900 cum 5730.00 2807.70
Stone Chips (12mm down graded) [LAA≤25] 0.3300 cum 4640.00 1531.20
Sand (FM - 2.8) 0.4100 m3 1602.00 656.82
Water-reducing high range chemical admixture : Type-F 2.2500 liter 160.00 360.00
Head Mason 0.0800 day 650.00 52.00
Mason 0.4200 day 550.00 231.00
Skilled Labour 0.5000 day 450.00 225.00
Ordinary Labour 1.5000 day 370.00 555.00
Hire and running charges of Batching and Mixing Plant @ 20 0.0063 day 23000.00 144.90
cum/hour
H.C. of Generator (100 KVA) 0.0063 day 3500.00 22.05
H.C. of Backhoe End Loader (6 tons) 0.0063 day 6000.00 37.80
H.C. of Transit Mixer 4.0/4.5 cum capacity including fuel & 0.0200 day 10000.00 200.00
other related cost
Hire and running charges of Concrete Pump (30 & 45 cum 0.0063 day 5000.00 31.50
capacity)
Hire and running charges of Concrete Vibrator 0.0600 day 400.00 24.00
Subtotal-A: 10973.97
Steel Formwork/ shuttering, prop with necessary ( +9.00 % on Subtotal-A ) 987.66
supports etc.
Subtotal-A1: 11961.63
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 12200.86
Note : Rates of all items should be inclusive of all supply and carriage. Page: 644 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Total: 14912.16
4.09.07.02 For diaphragm walls, wing walls, piers, columns, projected pile cap
above water level, pier caps, abutments of bridges
Note : Rates of all items should be inclusive of all supply and carriage. Page: 645 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 10973.97
Steel Formwork/ shuttering, prop with necessary ( +14.00 % on Subtotal-A ) 1536.36
supports etc.
Subtotal-A1: 12510.33
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 12760.53
Note : Rates of all items should be inclusive of all supply and carriage. Page: 646 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Total: 15596.21
4.09.07.02.02 For height above 5m to 10m cum Add +25.00% with Item No 4.09.07.02.01
4.09.07.02.03 For height above 10m to 15m cum Add +50.00% with Item No 4.09.07.02.01
4.09.07.02.04 For height above 15m to 20m cum Add +75.00% with Item No 4.09.07.02.01
4.09.07.02.05 For height above 20m cum Add +80.00% with Item No 4.09.07.02.01
4.09.07.03 For solid slab type super-structure including cantilever, side walk, curb
and wheel guard of bridges
Note : Rates of all items should be inclusive of all supply and carriage. Page: 647 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 10973.97
Steel Formwork/ shuttering, prop with necessary ( +50.00 % on Subtotal-A ) 5486.99
supports etc.
Subtotal-A1: 16460.96
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 16790.17
Note : Rates of all items should be inclusive of all supply and carriage. Page: 648 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Total: 20521.32
4.09.07.03.02 For height above 5m to 10m cum Add +9.50% with Item No 4.09.07.03.01
4.09.07.03.03 For height above 10m to 15m cum Add +19.00% with Item No 4.09.07.03.01
4.09.07.03.04 For height above 15m to 20m cum Add +28.50% with Item No 4.09.07.03.01
4.09.07.03.05 For height above 20m cum Add +38.00% with Item No 4.09.07.03.01
4.09.07.04 For T-girder & slab type super-structure including cross girders, side
walk, curb and wheel guard of bridges
Note : Rates of all items should be inclusive of all supply and carriage. Page: 649 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 11195.47
Steel Formwork/ shuttering, prop with necessary ( +55.00 % on Subtotal-A ) 6157.51
supports etc.
Subtotal-A1: 17352.98
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 17700.04
Note : Rates of all items should be inclusive of all supply and carriage. Page: 650 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Total: 21633.38
4.09.07.04.02 For height above 5m to 10m cum Add +6.50% with Item No 4.09.07.04.01
4.09.07.04.03 For height above 10m to 15m cum Add +13.00% with Item No 4.09.07.04.01
4.09.07.04.04 For height above 15m to 20m cum Add +19.50% with Item No 4.09.07.04.01
4.09.07.04.05 For height above 20m cum Add +26.00% with Item No 4.09.07.04.01
Note : Rates of all items should be inclusive of all supply and carriage. Page: 651 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 11360.47
Steel Formwork/ shuttering, prop with necessary ( +60.00 % on Subtotal-A ) 6816.28
supports etc.
Subtotal-A1: 18176.75
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 18540.29
Note : Rates of all items should be inclusive of all supply and carriage. Page: 652 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Total: 22660.35
4.09.07.05.02 For height above 5m to 10m cum Add +12.50% with Item No 4.09.07.05.01
4.09.07.05.03 For height above 10m to 15m cum Add +25.00% with Item No 4.09.07.05.01
4.09.07.05.04 For height above 15m to 20m cum Add +37.50% with Item No 4.09.07.05.01
4.09.07.05.05 For height above 20m cum Add +40.00% with Item No 4.09.07.05.01
Note : Rates of all items should be inclusive of all supply and carriage. Page: 653 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 11360.47
Steel Formwork/ shuttering, prop with necessary ( +62.50 % on Subtotal-A ) 7100.29
supports etc.
Subtotal-A1: 18460.76
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 18829.98
Note : Rates of all items should be inclusive of all supply and carriage. Page: 654 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Total: 23014.42
4.09.07.06.02 For height above 5m to 10m cum Add +12.50% with Item No 4.09.07.06.01
4.09.07.06.03 For height above 10m to 15m cum Add +25.00% with Item No 4.09.07.06.01
4.09.07.06.04 For height above 15m to 20m cum Add +37.50% with Item No 4.09.07.06.01
4.09.07.06.05 For height above 20m cum Add +40.00% with Item No 4.09.07.06.01
Note : Rates of all items should be inclusive of all supply and carriage. Page: 655 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 11171.97
Steel Formwork/ shuttering, prop with necessary ( +9.00 % on Subtotal-A ) 1005.48
supports etc.
Subtotal-A1: 12177.45
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 12421.00
Note : Rates of all items should be inclusive of all supply and carriage. Page: 656 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Total: 15181.22
4.09.08.02 For diaphragm walls, wing walls, piers, columns, projected pile cap
above water level, pier caps, abutments of bridges
Note : Rates of all items should be inclusive of all supply and carriage. Page: 657 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 11171.97
Steel Formwork/ shuttering, prop with necessary ( +14.00 % on Subtotal-A ) 1564.08
supports etc.
Subtotal-A1: 12736.05
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 12990.77
Note : Rates of all items should be inclusive of all supply and carriage. Page: 658 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Total: 15877.60
4.09.08.02.02 For height above 5m to 10m cum Add +25.00% with Item No 4.09.08.02.01
4.09.08.02.03 For height above 10m to 15m cum Add +50.00% with Item No 4.09.08.02.01
4.09.08.02.04 For height above 15m to 20m cum Add +75.00% with Item No 4.09.08.02.01
4.09.08.02.05 For height above 20m cum Add +80.00% with Item No 4.09.08.02.01
4.09.08.03 For solid slab type super-structure including cantilever, side walk, curb
and wheel guard of bridges
Note : Rates of all items should be inclusive of all supply and carriage. Page: 659 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 11244.93
Steel Formwork/ shuttering, prop with necessary ( +50.00 % on Subtotal-A ) 5622.47
supports etc.
Subtotal-A1: 16867.40
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 17204.75
Note : Rates of all items should be inclusive of all supply and carriage. Page: 660 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
IT 4% of Total 841.12
Total: 21028.03
4.09.08.03.02 For height above 5m to 10m cum Add +9.50% with Item No 4.09.08.03.01
4.09.08.03.03 For height above 14m to 15m cum Add +19.00% with Item No 4.09.08.03.01
4.09.08.03.04 For height above 19m to 20m cum Add +28.50% with Item No 4.09.08.03.01
4.09.08.03.05 For height above 20m cum Add +38.00% with Item No 4.09.08.03.01
4.09.08.04 For T-girder & slab type super-structure including cross girders, side
walk, curb and wheel guard of bridges
Note : Rates of all items should be inclusive of all supply and carriage. Page: 661 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 11393.47
Steel Formwork/ shuttering, prop with necessary ( +55.00 % on Subtotal-A ) 6266.41
supports etc.
Subtotal-A1: 17659.88
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 18013.08
Note : Rates of all items should be inclusive of all supply and carriage. Page: 662 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Total: 22015.98
4.09.08.04.02 For height above 5m to 10m cum Add +6.00% with Item No 4.09.08.04.01
4.09.08.04.03 For height above 10m to 15m cum Add +12.00% with Item No 4.09.08.04.01
4.09.08.04.04 For height above 15m to 20m cum Add +18.00% with Item No 4.09.08.04.01
4.09.08.04.05 For height above 20m cum Add +24.00% with Item No 4.09.08.04.01
Note : Rates of all items should be inclusive of all supply and carriage. Page: 663 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 11558.47
Steel Formwork/ shuttering, prop with necessary ( +57.50 % on Subtotal-A ) 6646.12
supports etc.
Subtotal-A1: 18204.59
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 18568.68
Note : Rates of all items should be inclusive of all supply and carriage. Page: 664 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Total: 22695.06
4.09.08.05.02 For height above 5m to 10m cum Add +12.50% with Item No 4.09.08.05.01
4.09.08.05.03 For height above 10m to 15m cum Add +25.00% with Item No 4.09.08.05.01
4.09.08.05.04 For height above 15m to 20m cum Add +37.50% with Item No 4.09.08.05.01
4.09.08.05.05 For height above 20m cum Add +40.00% with Item No 4.09.08.05.01
Note : Rates of all items should be inclusive of all supply and carriage. Page: 665 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 11558.47
Steel Formwork/ shuttering, prop with necessary ( +62.50 % on Subtotal-A ) 7224.04
supports etc.
Subtotal-A1: 18782.51
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 19158.16
Note : Rates of all items should be inclusive of all supply and carriage. Page: 666 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Total: 23415.53
4.09.08.06.02 For height above 5m to 10m cum Add +12.50% with Item No 4.09.08.06.01
4.09.08.06.03 For height above 10m to 15m cum Add +25.00% with Item No 4.09.08.06.01
4.09.08.06.04 For height above 15m to 20m cum Add +37.50% with Item No 4.09.08.06.01
4.09.08.06.05 For height above 20m cum Add +40.00% with Item No 4.09.08.06.01
Note : Rates of all items should be inclusive of all supply and carriage. Page: 667 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 11225.22
Steel Formwork/ shuttering, prop with necessary ( +50.00 % on Subtotal-A ) 5612.61
supports, girder shifting/ launching, steel sheath &
all necessary equipment etc.
Subtotal-A1: 16837.83
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 17174.59
4.10.01.01.02 For height above 5 m to 10 m cum Add +10.00% with Item No 4.10.01.01.01
Note : Rates of all items should be inclusive of all supply and carriage. Page: 668 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.10.01.01.03 For height above 10 m to 15 m cum Add +20.00% with Item No 4.10.01.01.01
4.10.01.01.04 For height above 15 m to 20 m cum Add +30.00% with Item No 4.10.01.01.01
4.10.01.01.05 For height above 20 m cum Add +40.00% with Item No 4.10.01.01.01
Note : Rates of all items should be inclusive of all supply and carriage. Page: 669 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 11225.22
Steel Formwork/ shuttering, prop with necessary ( +80.00 % on Subtotal-A ) 8980.18
supports, girder shifting/ launching, steel sheath &
all necessary equipment etc.
Subtotal-A1: 20205.40
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 20609.50
4.10.01.02.02 For height above 5 m to 10 m cum Add +6.00% with Item No 4.10.01.02.01
4.10.01.02.03 For height above 10 m to 15 m cum Add +12.00% with Item No 4.10.01.02.01
Note : Rates of all items should be inclusive of all supply and carriage. Page: 670 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.10.01.02.04 For height above 15 m to 20 m cum Add +18.00% with Item No 4.10.01.02.01
4.10.01.02.05 For height above 20 m cum Add +24.00% with Item No 4.10.01.02.01
Note : Rates of all items should be inclusive of all supply and carriage. Page: 671 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 11225.22
Steel Formwork/ shuttering, prop with necessary ( +100.00 % on Subtotal-A ) 11225.22
supports, girder shifting/ launching, steel sheath &
all necessary equipment etc.
Subtotal-A1: 22450.44
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 22899.45
4.10.01.03.02 For height above 5 m to 10 m cum Add +6.50% with Item No 4.10.01.03.01
4.10.01.03.03 For height above 10 m to 15 m cum Add +13.00% with Item No 4.10.01.03.01
Note : Rates of all items should be inclusive of all supply and carriage. Page: 672 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.10.01.03.04 For height above 15 m to 20 m cum Add +19.50% with Item No 4.10.01.03.01
4.10.01.03.05 For height above 20 m cum Add +26.00% with Item No 4.10.01.03.01
Note : Rates of all items should be inclusive of all supply and carriage. Page: 673 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 11435.97
Steel Formwork/ shuttering, prop with necessary ( +50.00 % on Subtotal-A ) 5717.99
supports, girder shifting/ launching, steel sheath &
all necessary equipment etc.
Subtotal-A1: 17153.96
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 17497.03
Note : Rates of all items should be inclusive of all supply and carriage. Page: 674 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
IT 4% of Total 855.41
Total: 21385.26
4.10.02.01.02 For height above 5 m to 10 m cum Add +10.00% with Item No 4.10.02.01.01
4.10.02.01.03 For height above 10 m to 15 m cum Add +20.00% with Item No 4.10.02.01.01
4.10.02.01.04 For height above 15 m to 20 m cum Add +30.00% with Item No 4.10.02.01.01
4.10.02.01.05 For height above 20 m cum Add +40.00% with Item No 4.10.02.01.01
Note : Rates of all items should be inclusive of all supply and carriage. Page: 675 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 11435.97
Steel Formwork/ shuttering, prop with necessary ( +80.00 % on Subtotal-A ) 9148.78
supports, girder shifting/ launching, steel sheath &
all necessary equipment etc.
Subtotal-A1: 20584.75
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 20996.44
Note : Rates of all items should be inclusive of all supply and carriage. Page: 676 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
IT 4% of Total 1026.49
Total: 25662.32
4.10.02.02.02 For height above 5 m to 10 m cum Add +6.00% with Item No 4.10.02.02.01
4.10.02.02.03 For height above 10 m to 15 m cum Add +12.00% with Item No 4.10.02.02.01
4.10.02.02.04 For height above 15 m to 20 m cum Add +18.00% with Item No 4.10.02.02.01
4.10.02.02.05 For height above 20 m cum Add +24.00% with Item No 4.10.02.02.01
Note : Rates of all items should be inclusive of all supply and carriage. Page: 677 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 11435.97
Steel Formwork/ shuttering, prop with necessary ( +100.00 % on Subtotal-A ) 11435.97
supports, girder shifting/ launching, steel sheath &
all necessary equipment etc.
Subtotal-A1: 22871.94
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 23329.38
Note : Rates of all items should be inclusive of all supply and carriage. Page: 678 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
IT 4% of Total 1140.55
Total: 28513.69
4.10.02.03.02 For height above 5 m to 10 m cum Add +6.50% with Item No 4.10.02.03.01
4.10.02.03.03 For height above 10 m to 15 m cum Add +13.00% with Item No 4.10.02.03.01
4.10.02.03.04 For height above 15 m to 20 m cum Add +19.50% with Item No 4.10.02.03.01
4.10.02.03.05 For height above 20 m cum Add +26.00% with Item No 4.10.02.03.01
Note : Rates of all items should be inclusive of all supply and carriage. Page: 679 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Note : Rates of all items should be inclusive of all supply and carriage. Page: 680 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 11670.82
Steel Formwork/ shuttering, prop with necessary ( +50.00 % on Subtotal-A ) 5835.41
supports, girder shifting/ launching, steel sheath &
all necessary equipment etc.
Subtotal-A1: 17506.23
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 17856.35
4.10.03.01.02 For height above 5 m to 10 m cum Add +10.00% with Item No 4.10.03.01.01
Note : Rates of all items should be inclusive of all supply and carriage. Page: 681 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.10.03.01.03 For height above 10 m to 15 m cum Add +20.00% with Item No 4.10.03.01.01
4.10.03.01.04 For height above 15 m to 20 m cum Add +30.00% with Item No 4.10.03.01.01
4.10.03.01.05 For height above 20 m cum Add +40.00% with Item No 4.10.03.01.01
Note : Rates of all items should be inclusive of all supply and carriage. Page: 682 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 11670.82
Steel Formwork/ shuttering, prop with necessary ( +80.00 % on Subtotal-A ) 9336.66
supports, girder shifting/ launching, steel sheath &
all necessary equipment etc.
Subtotal-A1: 21007.48
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 21427.63
4.10.03.02.02 For height above 5 m to 10 m cum Add +6.00% with Item No 4.10.03.02.01
Note : Rates of all items should be inclusive of all supply and carriage. Page: 683 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.10.03.02.03 For height above 10 m to 15 m cum Add +12.00% with Item No 4.10.03.02.01
4.10.03.02.04 For height above 15 m to 20 m cum Add +18.00% with Item No 4.10.03.02.01
4.10.03.02.05 For height above 20 m cum Add +24.00% with Item No 4.10.03.02.01
Note : Rates of all items should be inclusive of all supply and carriage. Page: 684 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 11643.57
Steel Formwork/ shuttering, prop with necessary ( +50.00 % on Subtotal-A ) 5821.79
supports, girder shifting/ launching, steel sheath &
all necessary equipment etc.
Subtotal-A1: 17465.36
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 17814.66
Note : Rates of all items should be inclusive of all supply and carriage. Page: 685 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
IT 4% of Total 870.94
Total: 21773.48
4.10.04.01.02 For height above 5 m to 10 m cum Add +10.00% with Item No 4.10.04.01.01
4.10.04.01.03 For height above 10 m to 15 m cum Add +20.00% with Item No 4.10.04.01.01
4.10.04.01.04 For height above 15 m to 20 m cum Add +30.00% with Item No 4.10.04.01.01
4.10.04.01.05 For height above 20 m cum Add +40.00% with Item No 4.10.04.01.01
Note : Rates of all items should be inclusive of all supply and carriage. Page: 686 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 11643.57
Steel Formwork/ shuttering, prop with necessary ( +80.00 % on Subtotal-A ) 9314.86
supports, girder shifting/ launching, steel sheath &
all necessary equipment etc.
Subtotal-A1: 20958.43
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 21377.59
Note : Rates of all items should be inclusive of all supply and carriage. Page: 687 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
IT 4% of Total 1045.13
Total: 26128.17
4.10.04.02.02 For height above 5 m to 10 m cum Add +6.00% with Item No 4.10.04.02.01
4.10.04.02.03 For height above 10 m to 15 m cum Add +12.00% with Item No 4.10.04.02.01
4.10.04.02.04 For height above 15 m to 20 m cum Add +18.00% with Item No 4.10.04.02.01
4.10.04.02.05 For height above 20 m cum Add +24.00% with Item No 4.10.04.02.01
Note : Rates of all items should be inclusive of all supply and carriage. Page: 688 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 11643.57
Steel Formwork/ shuttering, prop with necessary ( +100.00 % on Subtotal-A ) 11643.57
supports, girder shifting/ launching, steel sheath &
all necessary equipment etc.
Subtotal-A1: 23287.14
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 23752.88
Note : Rates of all items should be inclusive of all supply and carriage. Page: 689 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
IT 4% of Total 1161.25
Total: 29031.30
4.10.04.03.02 For height above 5 m to 10 m cum Add +6.50% with Item No 4.10.04.03.01
4.10.04.03.03 For height above 10 m to 15 m cum Add +13.00% with Item No 4.10.04.03.01
4.10.04.03.04 For height above 15 m to 20 m cum Add +19.50% with Item No 4.10.04.03.01
4.10.04.03.05 For height above 20 m cum Add +26.00% with Item No 4.10.04.03.01
Note : Rates of all items should be inclusive of all supply and carriage. Page: 690 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Note : Rates of all items should be inclusive of all supply and carriage. Page: 691 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 14101.17
Steel Formwork/ shuttering, prop with necessary ( +80.00 % on Subtotal-A ) 11280.94
supports, girder shifting/ launching, steel sheath &
all necessary equipment etc.
Subtotal-A1: 25382.11
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 25889.75
Note : Rates of all items should be inclusive of all supply and carriage. Page: 692 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.10.05.01.02 For height above 5 m to 10 m cum Add +5.75% with Item No 4.10.05.01.01
4.10.05.01.03 For height above 10 m to 15 m cum Add +11.50% with Item No 4.10.05.01.01
4.10.05.01.04 For height above 15 m to 20 m cum Add +17.50% with Item No 4.10.05.01.01
4.10.05.01.05 For height above 20 m cum Add +23.00% with Item No 4.10.05.01.01
Note : Rates of all items should be inclusive of all supply and carriage. Page: 693 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Note : Rates of all items should be inclusive of all supply and carriage. Page: 694 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 14551.17
Steel Formwork/ shuttering, prop with necessary ( +80.00 % on Subtotal-A ) 11640.94
supports, girder shifting/ launching, steel sheath &
all necessary equipment etc.
Subtotal-A1: 26192.11
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 26715.95
Note : Rates of all items should be inclusive of all supply and carriage. Page: 695 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.10.06.01.02 For height above 5 m to 10 m cum Add +5.75% with Item No 4.10.06.01.01
4.10.06.01.03 For height above 10 m to 15 m cum Add +11.50% with Item No 4.10.06.01.01
4.10.06.01.04 For height above 15 m to 20 m cum Add +17.25% with Item No 4.10.06.01.01
4.10.06.01.05 For height above 20 m cum Add +23.00% with Item No 4.10.06.01.01
Note : Rates of all items should be inclusive of all supply and carriage. Page: 696 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Note : Rates of all items should be inclusive of all supply and carriage. Page: 697 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 139848.32
Grouting, Erection & all other accessories ( +25.00 % on Subtotal-A ) 34962.08
H.C. of all Machines and Equipment ( +25.00 % on Subtotal-A ) 34962.08
Subtotal-A1: 209772.47
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 213967.92
Note : Rates of all items should be inclusive of all supply and carriage. Page: 698 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 3000.00
All other cost & fitting & fixing ( +10.00 % on Subtotal-A ) 300.00
Subtotal-A1: 3300.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 3366.00
Subtotal-A: 3500.00
All other cost & fitting & fixing ( +10.00 % on Subtotal-A ) 350.00
Subtotal-A1: 3850.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 3927.00
Note : Rates of all items should be inclusive of all supply and carriage. Page: 699 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 5600.00
All other cost & fitting & fixing ( +10.00 % on Subtotal-A ) 560.00
Subtotal-A1: 6160.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 6283.20
Subtotal-A: 7000.00
All other cost & fitting & fixing ( +10.00 % on Subtotal-A ) 700.00
Subtotal-A1: 7700.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 7854.00
Note : Rates of all items should be inclusive of all supply and carriage. Page: 700 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 9000.00
All other cost & fitting & fixing ( +10.00 % on Subtotal-A ) 900.00
Subtotal-A1: 9900.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 10098.00
Subtotal-A: 12000.00
All other cost & fitting & fixing ( +10.00 % on Subtotal-A ) 1200.00
Subtotal-A1: 13200.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 13464.00
Note : Rates of all items should be inclusive of all supply and carriage. Page: 701 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 3500.00
All other cost & fitting & fixing ( +10.00 % on Subtotal-A ) 350.00
Subtotal-A1: 3850.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 3927.00
Subtotal-A: 5000.00
All other cost & fitting & fixing ( +10.00 % on Subtotal-A ) 500.00
Subtotal-A1: 5500.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 5610.00
Note : Rates of all items should be inclusive of all supply and carriage. Page: 702 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 8000.00
All other cost & fitting & fixing ( +10.00 % on Subtotal-A ) 800.00
Subtotal-A1: 8800.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 8976.00
Subtotal-A: 10000.00
All other cost & fitting & fixing ( +10.00 % on Subtotal-A ) 1000.00
Subtotal-A1: 11000.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 11220.00
Note : Rates of all items should be inclusive of all supply and carriage. Page: 703 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 11000.00
All other cost & fitting & fixing ( +10.00 % on Subtotal-A ) 1100.00
Subtotal-A1: 12100.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 12342.00
Subtotal-A: 12500.00
All other cost & fitting & fixing ( +10.00 % on Subtotal-A ) 1250.00
Subtotal-A1: 13750.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 14025.00
Note : Rates of all items should be inclusive of all supply and carriage. Page: 704 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 160668.50
H.C. of all Machines and Equipment ( +25.00 % on Subtotal-A ) 40167.13
Subtotal-A1: 200835.63
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 204852.34
Note : Rates of all items should be inclusive of all supply and carriage. Page: 705 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.10.10 Mono Strand Anchorage: Supplying, fitting and fixing of best quality
international branded (preferably Freyssinet, Dynamic, Poston, VSL or
equivalent) post tensioning monostrand steel anchorage system
comprising bearing plate, wedge plate, guide tube and gripping
accessories with necessary test certificate from manufacturer for origin,
performance and capacity including cost of all materials and accessories,
necessary performance and capacity test from BUET, placing properly in
position, labour, welding and carrying etc. all complete as design,
drawing and direction of the E-I-C. The geometrical size and shape of
the anchorage system shall be confirmed as per drawing or
manufacturer’s recommendation with necessary test results. One set of
extra anchorage will be required for laboratory test and necessary
arrangement.
Subtotal-A: 850.00
All other costs including fitting, fixing, installation, ( +30.00 % on Subtotal-A ) 255.00
testing, transportation etc.
Subtotal-A1: 1105.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 1127.10
Note : Rates of all items should be inclusive of all supply and carriage. Page: 706 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 950.00
All other costs including fitting, fixing, installation, ( +30.00 % on Subtotal-A ) 285.00
testing, transportation etc.
Subtotal-A1: 1235.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 1259.70
4.10.11 Stay Cables: Supplying, fabricating and fixing Stay Cables (preferably LS
VSL, Tensaccial, Freyssinet, BBR or equivalent) in position having a
tendon formed from multiple and parallel 15.7mm dia. high tensile 7-
wire steel low relaxation strands with nominal cross-sectional area of
150 mm2 and a minimum ultimate tensile strengh of 1860 MPa, strands
shall be galvanized and corrosion inhibited, a greased or waxed strand
with a tightly extruded plastic sheathing, an outer thick-walled plastic
stay pipe, factory prefabricated fixed/ adjustable anchorages,
elastomeric dampers at the end of the form tube, appropriate saddle
system (if required) including cost of equipment, labour etc. complete in
all respect as per drawing, specification and direction of Engineer-in-
charge.
[Contractors generally do not have expertise for this item. The job is
therefore, got done from specialised/patented firms who have the
expertise in the field of stay cables. The prevailing rate in the market is
required to be ascertained from the market and added in the cost
estimate.]
Note : Rates of all items should be inclusive of all supply and carriage. Page: 707 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.10.12 Dummy Cable Duct: Supplying, fabricating and fixing dummy cable duct m
including end anchor cone, cost of equipment, labour etc. complete as
per drawing, specification and direction of Engineer-in-charge.
Corrugated Galvanized Steel Sheathing Duct 1.0500 m 165.00 173.25
Anchorage of 19K15/ 19T15 System 0.0400 set 10000.00 400.00
Non-Shrink Grout 0.1600 Kg 40.00 6.40
Stone Chips (12mm down graded) [LAA≤25] 0.0007 cum 4640.00 3.25
H.C. of Sheating Pipe Machine 0.0075 Day 2500.00 18.75
H.C. of Generator (40 KVA) 0.0075 day 2500.00 18.75
Skilled Technician 0.0075 day 680.00 5.10
Helper of Plumber/ Electric Mistry/ Painter/ Carpenter/ 0.0575 day 470.00 27.03
Operator
Carpenter 0.0600 day 680.00 40.80
Mason 0.0200 day 550.00 11.00
Subtotal-A: 704.32
Cost of material for Spacers, Insulation Tape, ( +7.50 % on Subtotal-A ) 52.82
Plywood and Miscellaneous items
Subtotal-A1: 757.15
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 772.29
Note : Rates of all items should be inclusive of all supply and carriage. Page: 708 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Note : Rates of all items should be inclusive of all supply and carriage. Page: 709 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.11.01.01 Grade 300 (RB 300): Ribbed or Deformed bar produced and marked as kg
per BDS ISO 6935-2:2006 with minimum yield strength, fy (ReH) = 300
MPa, but the tested yield strength shall not exceed fy by more than the
125 MPa and the ratio of tested ultimate strength, fu (Re) to tested
yield strength (fy) shall be at least 1.25 and minimum elongation after
fracture (A5.65) & minimum total elongation at maximum force (Agt) is
16% and 2.5% respectively.
M.S. Ribbed/ Deformed Bar (Grade 300) 1.0200 kg 54.00 55.08
GI Wire (22 BWG) 0.0100 kg 90.00 0.90
Re-bar Fabricator 0.0030 day 570.00 1.71
Skilled Labour 0.0025 day 450.00 1.13
Ordinary Labour 0.0075 day 370.00 2.78
Subtotal-A: 61.59
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 62.82
Note : Rates of all items should be inclusive of all supply and carriage. Page: 710 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.11.01.02 Grade 400 (RB 400/ 400W): Ribbed or Deformed bar produced and kg
marked as per BDS ISO 6935-2:2006 with minimum yield strength, fy
(ReH) = 400 MPa, but the tested yield strength shall not exceed fy by
more than the 125 MPa and the ratio of tested ultimate strength, fu
(Re) to tested yield strength (fy) shall be at least 1.25 and minimum
elongation after fracture (A5.65) & minimum total elongation at
maximum force (Agt) is 14% and 2.5% respectively.
M.S. Ribbed/ Deformed Bar (Grade 400) 1.0200 kg 58.00 59.16
GI Wire (22 BWG) 0.0100 kg 90.00 0.90
Re-bar Fabricator 0.0030 day 570.00 1.71
Skilled Labour 0.0025 day 450.00 1.13
Ordinary Labour 0.0075 day 370.00 2.78
Subtotal-A: 65.67
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 66.98
Note : Rates of all items should be inclusive of all supply and carriage. Page: 711 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.11.01.03 Grade 420 (B420DWR): Ribbed or Deformed bar produced and marked kg
as per ISO 6935-2:2015/ ASTM A706M - 16 with minimum yield
strength, fy(ReH) = 420 MPa but fy(ReH) not exceeding 540 MPa, the
ratio of ultimate tensile strength, fu(Rm) to actual yield strength,
fy(ReH) shall be at least 1.25 and minimum elongation in 200mm shall
be at least 14% for bar sizes 10mm through 20mm, at least 12% for
bar sizes 22mm through 32mm and at least 10% for bar sizes 40mm
and 50mm.
M.S. Ribbed/ Deformed Bar (Grade 420) 1.0200 kg 58.00 59.16
GI Wire (22 BWG) 0.0100 kg 90.00 0.90
Re-bar Fabricator 0.0030 day 570.00 1.71
Skilled Labour 0.0025 day 450.00 1.13
Ordinary Labour 0.0075 day 370.00 2.78
Subtotal-A: 65.67
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 66.98
Note : Rates of all items should be inclusive of all supply and carriage. Page: 712 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.11.01.04 Grade 500 (RB 500/ 500W): Ribbed or Deformed bar produced and kg
marked as per BDS ISO 6935-2:2006 with minimum yield stress, fy
(ReH) = 500 MPa and minimum elongation after fracture (A5.65) &
minimum total elongation at maximum force (Agt) is 14% and 2.5%
respectively.
[This reinforcement shall be selected as per instruction given in the
drawing & after getting approval from Design unit, LGED.]
M.S. Ribbed/ Deformed Bar (Grade 500) 1.0200 kg 57.00 58.14
GI Wire (22 BWG) 0.0100 kg 90.00 0.90
Re-bar Fabricator 0.0030 day 570.00 1.71
Skilled Labour 0.0025 day 450.00 1.13
Ordinary Labour 0.0075 day 370.00 2.78
Subtotal-A: 64.65
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 65.94
Note : Rates of all items should be inclusive of all supply and carriage. Page: 713 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.11.01.05 Grade 550: Deformed bar produced and marked as per ASTM A706M - kg
16 with minimum yield strength, fy = 550 MPa but fy not exceeding 675
MPa, minimum ultimate strength, fu = 690 MPa, the ratio of actual
ultimate tensile strength, fu to actual yield strength, fy shall be at least
1.25 and minimum elongation in 200mm shall be at least 12% for bar
sizes 10mm through 32mm and at least 10% for bar sizes 40mm and
50mm.
[This reinforcement shall be selected as per instruction given in the
drawing & after getting approval from Design unit, LGED.]
M.S. Ribbed/ Deformed Bar (Grade 550) 1.0200 kg 59.00 60.18
GI Wire (22 BWG) 0.0100 kg 90.00 0.90
Re-bar Fabricator 0.0030 day 570.00 1.71
Skilled Labour 0.0025 day 450.00 1.13
Ordinary Labour 0.0075 day 370.00 2.78
Subtotal-A: 66.69
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 68.02
Note : Rates of all items should be inclusive of all supply and carriage. Page: 714 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.11.02 FBECR: Extra over item code: 4.11.01 for providing Fusion Bonded
Epoxy Coating (FBEC) to reinforcement bars as per ASTM A775/ BDS
ISO 14654: 2013 specification for a coating thickness (after curing) of
175 to 300 microns for 10mm to 16mm and 175 to 400 microns for
20mmm to 50mm re-bars including extra cost on account of careful
handling during straightening, cutting, bending & placing, extra cost on
account of using PVC coated binding wire instead of G.I. wire, extra cost
on account of touch-up material (All cut edges/weld areas and bend
locations where coating has been damaged touch up shall be done with
same paint, the upper thickness limit shall not apply to repaired areas of
damaged coating) supplied by coating agency and repair work, extra
cost on account of transportation to and fro from steel yard to plant and
plant to work site by trailer (if required), loading, unloading, flexibility &
holiday testing, including all taxes, etc. complete to ensure proper
resistance of FBE against corrosive environment.
[Fusion Bonded Epoxy Coating to be proposed only in Coastal
Area/Severe Exposure Condition with prior approval of Design Unit,
LGED.]
Subtotal-A: 10.00
Extra Cost for Handling, Epoxy Touch Up, PVC ( +5.00 % on Subtotal-A ) 0.50
coated binding wire etc.
Subtotal-A1: 10.50
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 10.71
Note : Rates of all items should be inclusive of all supply and carriage. Page: 715 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 8.00
Extra Cost for Handling, Epoxy Touch Up, PVC ( +5.00 % on Subtotal-A ) 0.40
coated binding wire etc.
Subtotal-A1: 8.40
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 8.57
Note : Rates of all items should be inclusive of all supply and carriage. Page: 716 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.11.03 Supplying and fabrication of High Yield strength (500 MPa, Galvanized kg
wire rope) of required size and length for all types of Arch Bridge work
including cutting, fitting , securing and placing them in position, etc.
including cost of all materials, labour, local handling, laboratory test,
incidentals charge to complete the work as per specifications, drawings
and direction of the Engineer. Laboratory test for physical property,
strength, to be performed as per ASTM
High Yield strength wire 1.0000 kg 200.00 200.00
Re-bar Fabricator 0.0030 day 570.00 1.71
Skilled Labour 0.0025 day 450.00 1.13
Ordinary Labour 0.0075 day 370.00 2.78
Subtotal-A: 205.61
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 209.72
Note : Rates of all items should be inclusive of all supply and carriage. Page: 717 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 223.50
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 227.97
Note : Rates of all items should be inclusive of all supply and carriage. Page: 718 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 305.10
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 311.20
Note : Rates of all items should be inclusive of all supply and carriage. Page: 719 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 468.30
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 477.67
Note : Rates of all items should be inclusive of all supply and carriage. Page: 720 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 519.30
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 529.69
4.11.05 Providing nosing with MS angles of different sizes. including cost of all kg
materials, welding, carrying, etc. all complete as per design, drawing
and direction of the E-I-C.
MS Angle, Flat bar, Z bar 1.0000 kg 59.00 59.00
Subtotal-A: 59.00
Welding, fitting, fixing etc. ( +96.00 % on Subtotal-A ) 56.64
Subtotal-A1: 115.64
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 117.95
Note : Rates of all items should be inclusive of all supply and carriage. Page: 721 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.11.06.01 Providing expansion joints between the breast walls (abutment top wall) kg
and girders or in between the girders with steel sheet and filling the gap
with sand and bitumen (80/100) as per design, drawing and direction of
the E-I-C.
MS Angle, Flat bar, Z bar 1.0000 kg 59.00 59.00
Bitumen [Grade 80/100] 0.0300 kg 49.00 1.47
Sand (FM - 0.8) 0.0070 m3 480.00 3.36
Subtotal-A: 63.83
Welding, fitting, fixing etc. ( +100.00 % on Subtotal-A ) 63.83
Subtotal-A1: 127.66
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 130.21
Note : Rates of all items should be inclusive of all supply and carriage. Page: 722 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.11.06.02 Strip Seal Expansion Joint: Providing and laying of Strip Seal type bridge m
deck expansion joint catering to maximum horizontal movement up to
80 mm including all materials (edge beams, Strip seal, anchorage,
angle, bar, plate etc.), installation in proper position, labour charges,
testing, handling, tools, equipment etc. all complete as per approved
drawing, specification and direction of the E-I-C. The Installation shall
be done by the manufacturer/ supplier or their authorised
representative ensuring compliance to the manufacturer's instruction for
installation.
[The concreting for joining the expansion joint assembly with the deck
has not been included in this analysis as the same is catered in the
quantities of RCC Deck.]
Supply of complete assembly of strip seal expansion joint 1.0000 m 15200.00 15200.00
comprising of edge beams, anchorage, strip seal element and
complete accessories as per approved specifications and
drawings.
Mason 0.0042 day 550.00 2.31
Skilled Labour 0.0208 day 450.00 9.36
Ordinary Labour 0.0833 day 370.00 30.82
Subtotal-A: 15242.49
Steel Formwork/ shuttering, prop with necessary ( +5.00 % on Subtotal-A ) 762.12
supports etc.
Subtotal-A1: 16004.62
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 16324.71
Note : Rates of all items should be inclusive of all supply and carriage. Page: 723 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.11.06.03 Modular Strip/ Box Seal Expansion Joint: Providing and laying of
modular strip/ Box seal expansion joint catering to maximum horizontal
movement beyond 80 mm and up to 240 mm including all materials,
installation in proper position, labour charges, testing, handling, tools,
equipment etc. all complete as per drawing, specification and direction
of the E-I-C. The anchoring bars of the expansion joint assembly shall
be welded to the main reinforcement of the deck. The installation shall
be done by the manufacturer/ supplier or their authorised
representative ensuring compliance to the manufacturer's instruction for
installation.
[The concreting for joining the expansion joint assembly with the deck
has not been included in this analysis as the same is catered in the
quantities of RCC Deck.]
Subtotal-A: 80048.12
Fitting, fixing & Installation Charge ( +5.00 % on Subtotal-A ) 4002.41
Subtotal-A1: 84050.52
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 85731.53
Note : Rates of all items should be inclusive of all supply and carriage. Page: 724 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 120060.51
Steel Formwork/ shuttering, prop with necessary ( +5.00 % on Subtotal-A ) 6003.03
supports etc.
Subtotal-A1: 126063.53
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 128584.81
4.11.07 Supplying, fitting and fixing bridge bearings including cost of all
materials, labour, welding and carrying etc. complete in all respect as
per design, drawing, specification and direction of the E-I-C.
4.11.07.01 Roller bearing with required numbers of rollers, plate and other fittings
Note : Rates of all items should be inclusive of all supply and carriage. Page: 725 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 247.03
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 251.97
Subtotal-A: 390.03
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 397.83
4.11.07.02 Hinge plate bearing with lead plates and other fittings
Note : Rates of all items should be inclusive of all supply and carriage. Page: 726 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 355.72
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 362.83
Subtotal-A: 396.88
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 404.82
Note : Rates of all items should be inclusive of all supply and carriage. Page: 727 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.11.07.03 Free plate bearing with lead plates and other fittings
Subtotal-A: 207.82
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 211.97
Note : Rates of all items should be inclusive of all supply and carriage. Page: 728 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 211.52
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 215.75
4.11.07.04 Hinge plate bearing with lead sheets including fitting & fixing kg
MS Plate (8mm thick) 0.6860 kg 70.00 48.02
Lead Sheet 0.1900 kg 350.00 66.50
MS Rod (Plain, 40 Grade) 0.1300 kg 45.00 5.85
MS Angle, Flat bar, Z bar 0.0800 kg 59.00 4.72
Skilled Labour 0.2000 day 450.00 90.00
Subtotal-A: 215.09
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 219.39
Note : Rates of all items should be inclusive of all supply and carriage. Page: 729 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 1.93
Add 15% of cost of bearing assembly for ( +15.00 % on Subtotal-A ) 0.29
foundation anchorage bolts and comsumables
Subtotal-A1: 2.22
Note : Rates of all items should be inclusive of all supply and carriage. Page: 730 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 2.26
Subtotal-A: 62.38
Miscellaneous Sundry etc. ( +5.00 % on Subtotal-A ) 3.12
Subtotal-A1: 65.50
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 66.81
Note : Rates of all items should be inclusive of all supply and carriage. Page: 731 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 49.93
Miscellaneous Sundry etc. ( +5.00 % on Subtotal-A ) 2.50
Subtotal-A1: 52.42
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 53.47
4.11.10 POT Bearing: Supplying, fitting and fixing in position true to line and
level free/ fixed/guided POT-PTFE bearing consisting of a metal piston
supported by a disc or unreinforced elastomer confined within a metal
cylinder, sealing rings, dust seals, PTFE surface sliding against stainless
steel mating surface, complete assembly to be of cast steel/fabricated
structural steel, metal and elastomer elements to be as per AASHTO
Specifications and direction of the E-I-C. One set must be taken as extra
for laboratory test which to be performed from BUET.
Note : Rates of all items should be inclusive of all supply and carriage. Page: 732 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 785.73
Cost of bearing assembly for foundation achorage ( +5.00 % on Subtotal-A ) 39.29
bolts and comsumables
Subtotal-A1: 825.02
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 841.52
Note : Rates of all items should be inclusive of all supply and carriage. Page: 733 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 473.59
Cost of bearing assembly for foundation achorage ( +5.00 % on Subtotal-A ) 23.68
bolts and comsumables
Subtotal-A1: 497.27
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 507.21
Note : Rates of all items should be inclusive of all supply and carriage. Page: 734 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.11.11 Spherical Bearing: Supplying fitting and fixing in position true to line and MT
level cast steel spherical/ cylindrical type bearing with stainless steel
plate with PTFE sliding surface as per AASHTO specification complete
with all accessories as per drawing and direction of E-I-C and including
cost of all material installation. One set must be taken as extra for
laboratory test which to be performed from BUET.
Spherical type bearing assembly consisting of a metal piston 1.0000 MT 825.00 825.00
supported by a disc, PTFE pads providing sliding surfaces
against stainless steel mating together with fabricated
structural steel assemblies duly painted with all components
Head Mason 0.0003 day 650.00 0.20
Skilled Labour 0.0017 day 450.00 0.77
Ordinary Labour 0.0050 day 370.00 1.85
Subtotal-A: 827.81
Cost of bearing assembly for foundation achorage ( +5.00 % on Subtotal-A ) 41.39
bolts and comsumables
Subtotal-A1: 869.20
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 886.58
4.11.12 STU: Providing and fitting in position true to line and level shock
transmission unit as per AASHTO specification complete with all
accessories as per drawing and direction of Engineer-in-charge and
including cost of all material for installation. The installation shall be
done by the manufacturer/ supplier or their authorised representative
ensuring compliance to the manufacturer's instruction for installation.
Note : Rates of all items should be inclusive of all supply and carriage. Page: 735 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 30602.31
Cost of temporary works (staging etc.), Anchorage ( +5.00 % on Subtotal-A ) 1530.12
Bolts, Grout, Concrete and rent of Equipment,
Machinery, tools etc.
Subtotal-A1: 32132.42
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 32775.07
Note : Rates of all items should be inclusive of all supply and carriage. Page: 736 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 23044.75
Cost of temporary works (staging etc.), Anchorage ( +3.00 % on Subtotal-A ) 691.34
Bolts, Grout, Concrete and rent of Equipment,
Machinery, tools etc.
Subtotal-A1: 23736.09
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 24210.81
Note : Rates of all items should be inclusive of all supply and carriage. Page: 737 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.12.01 Supplying and mixing specified type chemical admixture delivered from
an authorized local agent or manufacturer, comply with the ASTM C 494
requirements, confirming the current compliance of the admixture to
specification requirements like physical properties, unifomity and
equivalence in composition etc., performance (water content, fresh
concrete setting time and compressive strength) requirements,
delivered in sealed water-tight containers having and confirming plainly
marked the proprietary name of the admixture, type under this
specification, net weight or volume, manufacturing and expiry date, non
aggressiveness to environment, aggregates and metals in concrete etc.
and mixing the admixture in non prestressed cement concrete mixture
in the field under the strict accordance with manufacturers
recommendation and instruction, providing safety provisions in all
respects etc. all complete as per instruction and approved by the E-I-C.
Dose (quantity in milliliters per 50 kg bag cement) and
brand/origin/manufacturer with respect to particular brand of cement
and particular stock of aggregates and method of use to be determined
by mix design/ trial mix at the cost borne by the Contractor and shall be
carried out prior to start the work.
Note: The minimum cement specified shall not be reduced on account
of the use of admixtures. Use of admixture is subject to prior approval
of Central Quality Control Laboratory (CQCL), LGED or any specified
laboratory approved by the Engineer.
Note : Rates of all items should be inclusive of all supply and carriage. Page: 738 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.12.01.01 Supply and use of water reducing chemical admixture in concrete, litre
complying to ASTM C 494 Type - A of approved brand/ origin/
manufacturer and supplied by only manufacturer's authorised dealer
with certificate of origin. An admixture that reduces quantity of mixing
water required to produce concrete of a given consistency.
Water reducing chemical admixture : Type-A 1.0000 liter 130.00 130.00
Subtotal-A: 130.00
Carriage, safe storage, mixing & sundries etc. ( +4.00 % on Subtotal-A ) 5.20
Subtotal-A1: 135.20
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 137.90
Note : Rates of all items should be inclusive of all supply and carriage. Page: 739 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.12.01.02 Supply and use of retarding chemical admixture in concrete, complying litre
to ASTM C 494 Type B of approved brand/origin/ manufacturer and
supplied by only manufacturer's authorised dealer with certificate of
origin. An admixture that retards the setting of concrete, there by
reducing shrinkage in concrete specially for concrete laid in thick layers
and intended delayed construction for improved construction joints,
reconcreting etc.
Retrading chemical admixture : Type-B 1.0000 liter 125.00 125.00
Subtotal-A: 125.00
Carriage, safe storage, mixing & sundries etc. ( +4.00 % on Subtotal-A ) 5.00
Subtotal-A1: 130.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 132.60
Note : Rates of all items should be inclusive of all supply and carriage. Page: 740 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 135.00
Carriage, safe storage, mixing & sundries etc. ( +4.00 % on Subtotal-A ) 5.40
Subtotal-A1: 140.40
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 143.21
Note : Rates of all items should be inclusive of all supply and carriage. Page: 741 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.12.01.04 Supply and use of water-reducing and retarding chemical admixture in litre
concrete, complying to ASTM C 494 Type D of approved brand/ origin/
manufacturer and supplied by only manufacturer's authorised dealer
with certificate of origin. An admixture that reduces the quantity of
mixing water required to produce concrete of a given consistency i.e.
low w/c ratio and retards the setting of concrete specially for layerd,
thick laid concrete etc.
Water-reducing and retrading chemical admixture : Type-D 1.0000 liter 125.00 125.00
Subtotal-A: 125.00
Carriage, safe storage, mixing & sundries etc. ( +4.00 % on Subtotal-A ) 5.00
Subtotal-A1: 130.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 132.60
Note : Rates of all items should be inclusive of all supply and carriage. Page: 742 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.12.01.05 Supply and use of water-reducing and accelerating chemical admixture litre
in concrete, complying ASTM C 494 Type E of approved brand/origin/
manufacturer and supplied by only manufacturer's authorised dealer
with certificate of origin. An admixture that reduces the quantity of
mixing water required to produce concrete of a given consistency i.e.
low w/c ratio and accelerates setting and early strength development of
concrete.
Water-reducing and accelerating chemical admixture : Type-E 1.0000 liter 135.00 135.00
Subtotal-A: 135.00
Carriage, safe storage, mixing & sundries etc. ( +4.00 % on Subtotal-A ) 5.40
Subtotal-A1: 140.40
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 143.21
Note : Rates of all items should be inclusive of all supply and carriage. Page: 743 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.12.01.06 Supply and use of water-reducing high range chemical admixture in litre
concrete, complying to ASTM C 494 Type F of approved brand/origin/
manufacturer and supplied by only manufacturer's authorised dealer
with certificate of origin. An admixture that reduces the quantity of
mixing water required to produce concrete of a given consistency by 12
or greater (flowing concrete) and for higher strength of concrete
Water-reducing high range chemical admixture : Type-F 1.0000 liter 160.00 160.00
Subtotal-A: 160.00
Carriage, safe storage, mixing & sundries etc. ( +4.00 % on Subtotal-A ) 6.40
Subtotal-A1: 166.40
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 169.73
Note : Rates of all items should be inclusive of all supply and carriage. Page: 744 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.12.01.07 Supply and use of water-reducing high range and retarding chemical litre
admixture in concrete, complying to ASTM C 494 Type G of approved
brand/ origin/ manufacturer and supplied by only manufacturer's
authorised dealer with certificate of origin. An admixture that reduces
the quantity of mixing water required to produce concrete of a given
consistency by 12% or greater (flowing concrete) and retards setting of
concrete.
Water-reducing high range and retrading chemical admixture 1.0000 liter 160.00 160.00
: Type-G
Subtotal-A: 160.00
Carriage, safe storage, mixing & sundries etc. ( +4.00 % on Subtotal-A ) 6.40
Subtotal-A1: 166.40
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 169.73
Note : Rates of all items should be inclusive of all supply and carriage. Page: 745 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.12.02.01 20 Micron Film Galvanizing Compound for minimum 5 years protection sqm
against rust & corrosion.
Film Galvanizing Compound 0.1650 kg 4550.00 750.75
Water Paper 1.0000 each 22.00 22.00
Emery Paper 0.5000 each 21.00 10.50
Wire Brush 0.1000 each 50.00 5.00
Scrapper 0.1000 each 55.00 5.50
Chissel 0.1000 each 65.00 6.50
Roll Brush 0.0500 each 50.00 2.50
Jute 0.0800 kg 20.00 1.60
Markin cloth 0.0800 m 10.00 0.80
Hand Gloves 0.0300 Pair 130.00 3.90
Galvanize Coating Expert 0.0200 day 800.00 16.00
Plumber/ Electric Mistry/ Painter 0.0500 day 680.00 34.00
Skilled Technician 0.0500 day 680.00 34.00
Semi Skilled Technician 0.0500 day 570.00 28.50
Subtotal-A: 921.55
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 939.98
Note : Rates of all items should be inclusive of all supply and carriage. Page: 746 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.12.02.02 40 Micron Film Galvanizing Compound for minimum 10 years protection sqm
against rust & corrosion.
Film Galvanizing Compound 0.3300 kg 4550.00 1501.50
Water Paper 1.0000 each 22.00 22.00
Emery Paper 0.5000 each 21.00 10.50
Wire Brush 0.1000 each 50.00 5.00
Scrapper 0.1000 each 55.00 5.50
Chissel 0.1000 each 65.00 6.50
Roll Brush 0.1000 each 50.00 5.00
Jute 0.1000 kg 20.00 2.00
Markin cloth 0.1000 m 10.00 1.00
Hand Gloves 0.0500 Pair 130.00 6.50
Galvanize Coating Expert 0.0400 day 800.00 32.00
Plumber/ Electric Mistry/ Painter 0.1000 day 680.00 68.00
Skilled Technician 0.1600 day 680.00 108.80
Semi Skilled Technician 1.0000 day 570.00 570.00
Subtotal-A: 2344.30
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 2391.19
Note : Rates of all items should be inclusive of all supply and carriage. Page: 747 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 2919.70
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 2978.09
Note : Rates of all items should be inclusive of all supply and carriage. Page: 748 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 110.50
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 112.71
Note : Rates of all items should be inclusive of all supply and carriage. Page: 749 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.13.01 CWC: Providing and laying wearing course on deck slab of bridge with cum
minimum cement content ralates to mix ratio 1:1.5:3 and maximum
water cement ratio 0.4 having minimum required average strength, f'cr
= 33.5 MPa and satisfying a compressive strength f'c = 25 MPa at 28
days on standard cylinders as per standard practice of Code AASHTO/
ASTM and cement conforming to BDS EN 197-1 : 2003 CEM-II/A-
L/M/V/W 42.5N, Coarse sand of minimum FM 2.5 and 6mm down well
graded crushed stone chips broken from boulders (preferably stone
chips from Madhyapara, Dinajpur, LAA value not exceeding 30),
including breaking stone boulders into chips, screening through proper
sieves, casting, finishing complete to camber and grade, compacting,
curing at least for 28 days, etc. including cost and carriage of all
materials, labour, water, electricity, other incidental cost etc. all
complete as per design, drawing, specification & directionn of E-I-C.
Portland Composite Cement (CEM-II/A-L/M/V/W 42.5N) 7.7100 bag 430.00 3315.30
Stone Chips (6mm down graded) [LAA≤30] 0.8200 m3 3800.00 3116.00
Sand (FM - 2.5) 0.4100 m3 1500.00 615.00
Water reducing chemical admixture : Type-A 1.9275 liter 130.00 250.58
Head Mason 0.0600 day 650.00 39.00
Mason 0.3500 day 550.00 192.50
Skilled Labour 1.0000 day 450.00 450.00
Ordinary Labour 1.1000 day 370.00 407.00
H.C. of Concrete Mixture Machine (Capacity 0.40/ 0.28 cum) 0.0600 day 1200.00 72.00
Hire and running charges of Concrete Vibrator 0.0600 day 400.00 24.00
Subtotal-A: 8481.38
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 8651.00
Note : Rates of all items should be inclusive of all supply and carriage. Page: 750 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.13.02 RWDP: Providing & fixing rainwater down pipes including cost of all
materials, labours, equipment, transportation, fixtures, accessories etc.
at any level as per specification, drawings and direction of the E-I-C.
Subtotal-A: 416.48
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 424.81
Subtotal-A: 497.92
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 507.88
Note : Rates of all items should be inclusive of all supply and carriage. Page: 751 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 746.10
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 761.02
Subtotal-A: 834.40
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 851.09
Note : Rates of all items should be inclusive of all supply and carriage. Page: 752 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 1182.38
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 1206.03
Subtotal-A: 1709.50
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 1743.69
Note : Rates of all items should be inclusive of all supply and carriage. Page: 753 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 111.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 113.22
Subtotal-A: 185.25
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 188.96
Note : Rates of all items should be inclusive of all supply and carriage. Page: 754 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.13.03 BF: Back filling behind abutments, wing walls and retaining walls with cum
selected granular material (50:50 best quality picked brick chips & sand
of min. FM 1.00) of minimum 450 mm width, in layers of 150 mm
thickness free from dust, impurities etc. including compaction using
plate compactor, watering & dressing, supply & cost of all materials,
carrying and labour, hire charge of plate compactor and other tools etc.
all complete as per direction of the Engineer-In-Charge. Payment to be
made for the compacted volume only for a compaction of 90% of the
maximum dry density.
1st Class Picked Brick Bats 0.6650 m3 2150.00 1429.75
Sand (FM - 1.0) 0.6650 m3 567.00 377.06
Ordinary Labour 0.5000 day 370.00 185.00
H.C. of Plate Compactor (LF-72) 0.0313 day 850.00 26.61
H.C. of Water Tanker (Truck Mounted) 0.0020 day 2500.00 5.00
Subtotal-A: 2023.41
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 2063.88
Note : Rates of all items should be inclusive of all supply and carriage. Page: 755 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.13.04 WH: Providing weep holes in Brick masonry/ Plain/ Reinforced concrete each
retaining wall, abutment, wing/ return wall, with 50 - 100 mm dia PVC
pipe extending through the full width of structure with slope 1V : 20H
towards draining face including hand packing of 0.85 cum pervious
backfill material (40mm - 63mm sized 1st class/picked brick) wrapped in
filter fabric in the back of each weep hole etc. all compete as per
direction of the E-I-C.
[Cost of PVC pipe is included in this item and shall not be paid
separately.]
1st Class Brick Chips (20mm down graded) 0.0850 m3 2940.00 249.90
75mm PVC Pipe -2.9mm to 3.4mm wall thick 0.6000 m 165.00 99.00
Sand (FM - 0.8) 0.0270 m3 480.00 12.96
Empty Gunny Bag 1.0000 each 30.00 30.00
Skilled Labour 0.1000 day 450.00 45.00
Subtotal-A: 436.86
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 445.60
Note : Rates of all items should be inclusive of all supply and carriage. Page: 756 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.13.05 DS: Supplying, fitting and fixing in position galvanized drainage spouts each
for bridge decks made up by minimum 100mm dia. MS pipe of 4.05mm
wall thickness conforming to BDS 1031/ BS 1387 Medium Class, grating
formed by 262mm x 262mm top rim of 32mm X 28mm ASTM A36
complied MS rectangular bars and 4 nos. 198mm X 12mm X 25mm
ASTM A36 complied MS flat bars, square shaped collection pit of
210mm X 210mm made up by 6mm thick ASTM A36 complied MS plate
with necessary anchorage and fixing the grating frame by minimum 6
nos. of 10mm dia. bolts and other necessary fittings including all labour,
tools, plant, equipment, machinery, leads & lifts, fuel, electric charges
etc. complete in all respectas as per drawing, specifications and
direction of Engineer-in-Charge. The grating has to carry a spot load of
100 kN. Drainage spouts has to be constructed in such a way so that
the gratings can be temporarily fixed to protect against theft. After
fabrication, the complete assembly shall be given a hot dipped
galvanized coating.
[600mm MS Pipe is included in this unit rate, Extra length must be
added if necessary]
LW: Direct type Lap-welded splice over two sides of contact 0.9800 meter 374.73 367.24
by welding of minimum length not less than 10 times of bar
diameter …...(4.07.07.02)
Corrosion resistant Structural steel 18.9030 kg 58.00 1096.37
100mm dia MS pipe and wall thickness 4mm 0.6000 m 1300.00 780.00
Hot-dip Galvanizing in accordance with BS EN ISO 1461: 25.1380 kg 65.00 1633.97
1999 with minimum coat thickness of 85 microns or 610 gm
per square meter
GI bolt 10mm diameter 6.0000 each 20.00 120.00
Nails/ Nut bolts/ Screw/ Spikes 0.5000 kg 65.00 32.50
Mason 0.0100 day 550.00 5.50
Welder 0.0200 day 680.00 13.60
Skilled Labour 0.0100 day 450.00 4.50
Ordinary Labour 0.2500 day 370.00 92.50
Subtotal-A: 4146.18
Cost of cutting, sealant, grinding and fabrication ( +10.00 % on Subtotal-A ) 414.62
Note : Rates of all items should be inclusive of all supply and carriage. Page: 757 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
etc.
Subtotal-A1: 4560.80
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 4652.01
Note : Rates of all items should be inclusive of all supply and carriage. Page: 758 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.13.06 DG: Supplying, fitting and fixing in position galvanized drainage grating each
for bridge decks made up by 200mm x 150mm outer frame of 25mm x
25mm x 6mm ASTM A 36 complied MS Angles and 4 nos. 25mm x 6mm
ASTM A36 complied MS flat bars, grating fitted with 4 nos. BDS ISO
6935-2: 2006 (Grade 400) complied 12mm dia. anchor bar 100mm in
length by welding and other necessary fittings including all labour,
tools, plant, equipment, machinery, leads & lifts, fuel, electric charges
etc. complete in all respect as per drawing, specifications and direction
of Engineer-in-Charge. After fabrication, grating shall be given a hot
dipped galvanized coating.
LW: Direct type Lap-welded splice over two sides of contact 0.2000 meter 374.73 74.95
by welding of minimum length not less than 10 times of bar
diameter …...(4.07.07.02)
Supplying and fabrication of Ribbed or deformed bar 0.3720 kg 65.67 24.43
reinforcement conforming to BDS ISO 6935-2:2006 (Grade
400)………….(4.11.01.04)
Corrosion resistant Structural steel 1.8010 kg 58.00 104.46
Hot-dip Galvanizing in accordance with BS EN ISO 1461: 2.1730 kg 65.00 141.25
1999 with minimum coat thickness of 85 microns or 610 gm
per square meter
Mason 0.0100 day 550.00 5.50
Welder 0.0100 day 680.00 6.80
Skilled Labour 0.0100 day 450.00 4.50
Ordinary Labour 0.0500 day 370.00 18.50
Subtotal-A: 380.38
Cost of cutting, sealant, grinding and fabrication ( +10.00 % on Subtotal-A ) 38.04
etc.
Subtotal-A1: 418.42
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 426.78
Note : Rates of all items should be inclusive of all supply and carriage. Page: 759 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Total: 521.63
Subtotal-A: 205.00
Miscellaneous Sundry etc. ( +1.00 % on Subtotal-A ) 2.05
Subtotal-A1: 207.05
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 211.19
Note : Rates of all items should be inclusive of all supply and carriage. Page: 760 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 595.00
Miscellaneous Sundry etc. ( +1.00 % on Subtotal-A ) 5.95
Subtotal-A1: 600.95
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 612.97
Note : Rates of all items should be inclusive of all supply and carriage. Page: 761 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.13.08 MA: Providing and laying mastic asphalt wearing course on top of deck
slab excluding prime/tack coat with 10/20 penetration grade bitumen
satisfying the requirements of ASTM/AASHTO code, coarse aggregate
should be crushed stone chips (LAA value <=30) complying with the
specified grading requirement of the relevant item of Road Design
Standard - 2005, water absorption not >2%, flakiness index not >
35%, fine aggregate shall be the fraction passing the 2.36mm and
retained on the 0.075mm sieve, filler shall be limestone powder passing
75 micron sieve and shall have a calcium carbonate content of not <
80%, prepared by using mastic cooker and laid to required level and
slope after cleaning the surface, including hire charges of all tools,
plants and machinery, wages of operational staff, cost of fuel &
lubricants and all other incidental charges all complete as per design,
specification and direction of Engineer-in-Charge.
The contractor shall submit to the Engineer for approval at least one
month before the start of the work the job mix formula proposed to be
used by him for the work. [Excluding the cost of applying Prime/Tack
coat]
Notes:
1. Where prime/tack coat is required to be provided before laying
mastic asphalt, the same is required to be measured and paid
separately. The rate for prime/tack coat shall be taken from Road
Works.
2. Bituminous wearing course of specified thickness shall be overlaid
with this mastic asphalt and the rate for bituminous wearing course
shall be taken from Road Works.
Note : Rates of all items should be inclusive of all supply and carriage. Page: 762 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 678.98
Other incidental charges ( +5.00 % on Subtotal-A ) 33.95
Subtotal-A1: 712.93
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 727.19
Note : Rates of all items should be inclusive of all supply and carriage. Page: 763 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 819.93
Other incidental charges ( +5.00 % on Subtotal-A ) 41.00
Subtotal-A1: 860.92
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 878.14
Note : Rates of all items should be inclusive of all supply and carriage. Page: 764 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.14.01 Manufacturing and supplying Plain Cement Concrete (PCC) Blocks with
cement conforming to BDS EN 197-1 : 2003 CEM-II/A-L/M/V/W 42.5N,
sand of minimum FM 1.5 and 40 mm down well graded shingles to
attain a minimum 28 days cylinder strength of 9.00 MPa (suggested mix
proporation 1:3:6) including grading, washings shingles, mixing, laying
in forms, consolidating, curing for at least 21 days, including preparation
of platform, shuttering and stacking in measurable stacks, cost of all
materials, labour, equiptment and machinery, work at all leads and lifts,
loading and unloading, transportation and all other incidental charges
etc. all complete as per drawing, specification & direction of the E-I-C.
Steel shutter shall be used to perform the job.
[Payment shall be done after laying of PCC Blocks]
Subtotal-A: 154.03
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 157.11
Note : Rates of all items should be inclusive of all supply and carriage. Page: 765 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 239.93
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 244.73
Note : Rates of all items should be inclusive of all supply and carriage. Page: 766 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 315.01
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 321.31
Note : Rates of all items should be inclusive of all supply and carriage. Page: 767 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.14.02 Labour charge for protective works in laying Plain Cement Concret (PCC) cum
blocks of different sizes including preparation, watering and ramming of
base, packing the residual space between masonry & other structural
members like columns, beams, slabs etc., providing opening as directed
and finishing neatly around the same, works at all leads and lifts,
loading and unloading, transportaiton and all other incidental charges
etc. all complete as per drawing, specification & direction of the E-I-C.
Mason 0.0200 day 550.00 11.00
Skilled Labour 0.3000 day 450.00 135.00
Ordinary Labour 1.3000 day 370.00 481.00
Subtotal-A: 627.00
H.C for jute & bamboo ( +10.00 % on Subtotal-A ) 62.70
Subtotal-A1: 689.70
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 703.49
Note : Rates of all items should be inclusive of all supply and carriage. Page: 768 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 685.21
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 698.91
Note : Rates of all items should be inclusive of all supply and carriage. Page: 769 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 1015.16
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 1035.46
4.14.04 Supplying and placing of required layers of gunny bagged Riprap filled
with cement (BDS EN 197-1 : 2003 CEM-II/A-L/M/V/W 42.5N) and
Sand (minimum FM 1.00) mortar (1:8) along slopes of abutments, piers,
banks of river/ khal including washing of sand, mixing in standard
mixture machine, filled & tamping the bags in place, stitching bags by
hand sewing machine, curing by sprinkling water over the bags
including preparation of slope (bed) by cutting or filling with ramming
the filled up earth to the same profile as that of the finished slope level,
placing the filled gunny bags along the slope, etc. all complete in all
respect as per approved design, specification and direction of the E-I-C.
Rate is inclusive of cost of all materials, labour and all incidental charges
in this connection.
Note : Rates of all items should be inclusive of all supply and carriage. Page: 770 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 529.27
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 539.86
Subtotal-A: 1028.34
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 1048.91
Note : Rates of all items should be inclusive of all supply and carriage. Page: 771 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.14.05 Supplying best quality sal/ sundari/ gazari/ sonali/ tetul/ Jam etc. bullah
piles free from rots, knots, sap and uniform in size at work site including
carrying, stacking, etc. all complete as per direction of the Engineer-in-
Charge. Before any piling work is commenced the contractor shall
submit to the engineer full details of the pile driving equipment and the
method he intends to use in carrying out the work. Diameter of bullah
pile to be measured at a distance of 1.5m from the thicker end.
Subtotal-A: 232.40
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 237.05
Subtotal-A: 433.80
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 442.48
Note : Rates of all items should be inclusive of all supply and carriage. Page: 772 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.14.06 Labour for driving best quality bullah piles up to required depth by
monkey/ power winch in all sorts of soil including hoisting and placing
piles in position, protecting the pile head with iron ring and cutting and
shaping heads before and after driving and including hire and labour for
necessary driving appliances etc. complete in all respect as per direction
of the Engineer-in-Charge. Pamyment to be made on the length driven
into the ground.
Subtotal-A: 174.50
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 177.99
4.14.06.01.02 For driving from pontoon or boats with staging m Add +4.00% with Item No 4.14.06.01.01
4.14.06.01.03 For driving from pontoon or boats with heavy staging m Add +7.00% with Item No 4.14.06.01.01
Note : Rates of all items should be inclusive of all supply and carriage. Page: 773 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 253.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 258.06
4.14.06.02.02 For driving from pontoon or boats with staging m Add +4.00% with Item No 4.14.06.02.01
4.14.06.02.03 For driving from pontoon or boats with heavy staging m Add +7.00% with Item No 4.14.06.02.01
Note : Rates of all items should be inclusive of all supply and carriage. Page: 774 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.14.07 Providing & Installtion of 100mm x 200mm x 8mm steel joist or any m
other required steel sections of 7.62m length @ 200mm c/c for Shore
protection work during excavation in foundation trenches to protect the
adjacent property including rent, conveyance, labour, material for
cutting to required size & for driving the same upto required depth
including cost of all fittings etc. complete as per direction of the E-I-C.
The contractor will remove the joists after completing the work without
any extra payment & the contractor will be the owner of these joists.
Note: Measurement shall be based on lengths of protection work in
horizontal direction.
H.C. of MS Plate, MS Angle & I-Beam etc. 982.1900 kg 18.00 17679.42
Skilled Labour 2.5000 day 450.00 1125.00
Ordinary Labour 7.0000 day 370.00 2590.00
H.C. of Driving Equipment 1.0000 day 350.00 350.00
Subtotal-A: 21744.42
All other costs & consumables etc. ( +5.00 % on Subtotal-A ) 1087.22
Subtotal-A1: 22831.64
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 23288.27
Note : Rates of all items should be inclusive of all supply and carriage. Page: 775 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.14.08 Supplying & dumping of soil filled geo-textile bags of different size and
capacity (fill volumn and weight when filled with dry sand/earth) at the
specified locations along the bottom of piles of piers/ toe line properly
including supply of geo-textile fabric as per following grading, sewing in
accordance with the detailed drawing and technical specifications,
protecting the geo-textile bags from UV ray or any other damages,
filling with suitable soil/ sand and stitching bags by hand sewing
machine properly with plastic thread and dumping the same in position
etc. including cost of all materials, labours, taxes, incidental charges
etc. complete in all respect as per approved drawing, specification and
direction of E-I-C.
Note : Rates of all items should be inclusive of all supply and carriage. Page: 776 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.14.08.01 Geo-Textile Bag: Empty Size: 800mm x 650mm, Fill Volumn: 0.0520 bag
cum & Weight: 80 Kg
Geo-Textile Grade: Grade-III-DF-40-2.3mm thick
Geo Textile (Grade-III-DF-40-2.3mm thick) 1.1900 m2 65.00 77.35
Operator 0.0029 day 570.00 1.65
Helper 0.0014 day 400.00 0.56
Royalty of Earth 0.0520 m3 25.00 1.30
Foreman 0.0002 day 800.00 0.16
Skilled Labour 0.0040 day 450.00 1.80
Ordinary Labour 0.0500 day 370.00 18.50
H.C. of Sewing Machine 0.0029 day 500.00 1.45
H.C. of Cutter (Geo-Textile) 0.0017 day 500.00 0.85
Subtotal-A: 103.62
Cost of Polyproplene/ Nylon thread & other ( +5.00 % on Subtotal-A ) 5.18
consumables etc.
Subtotal-A1: 108.80
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 110.98
Note : Rates of all items should be inclusive of all supply and carriage. Page: 777 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.14.08.02 Geo-Textile Bag: Empty Bag Size: 900mm x 700mm, Fill Volumn: bag
0.0730 cum & Weight: 110 Kg
Geo-Textile Grade: Grade-III-DF-40-2.3mm thick
Geo Textile (Grade-III-DF-40-2.3mm thick) 1.4250 m2 65.00 92.63
Operator 0.0033 day 570.00 1.88
Helper 0.0017 day 400.00 0.68
Royalty of Earth 0.0730 m3 25.00 1.83
Foreman 0.0002 day 800.00 0.16
Skilled Labour 0.0040 day 450.00 1.80
Ordinary Labour 0.0600 day 370.00 22.20
H.C. of Sewing Machine 0.0033 day 500.00 1.65
H.C. of Cutter (Geo-Textile) 0.0020 day 500.00 1.00
Subtotal-A: 123.82
Cost of Polyproplene/ Nylon thread & other ( +5.00 % on Subtotal-A ) 6.19
consumables etc.
Subtotal-A1: 130.01
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 132.61
Note : Rates of all items should be inclusive of all supply and carriage. Page: 778 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.14.08.03 Geo-Textile Bag: Empty Bag Size: 950mm x 750mm, Fill Volumn: bag
0.0840 cum & Weight: 125 Kg
Geo-Textile Grade: Grade-III-DF-40-2.3mm thick
Geo Textile (Grade-III-DF-40-2.3mm thick) 1.6000 m2 65.00 104.00
Operator 0.0033 day 570.00 1.88
Helper 0.0020 day 400.00 0.80
Royalty of Earth 0.0840 m3 25.00 2.10
Foreman 0.0002 day 800.00 0.16
Skilled Labour 0.0040 day 450.00 1.80
Ordinary Labour 0.0700 day 370.00 25.90
H.C. of Sewing Machine 0.0033 day 500.00 1.65
H.C. of Cutter (Geo-Textile) 0.0017 day 500.00 0.85
Subtotal-A: 139.14
Cost of Polyproplene/ Nylon thread & other ( +5.00 % on Subtotal-A ) 6.96
consumables etc.
Subtotal-A1: 146.10
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 149.02
Note : Rates of all items should be inclusive of all supply and carriage. Page: 779 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.14.08.04 Geo-Textile Bag: Empty Bag Size: 1075mm x 850mm, Fill Volumn: bag
0.1164 cum & Weight: 175 Kg
Geo-Textile Grade: Grade-V-DF-60-3.0mm thick
Geo Textile (Grade-V-DF-60-3.0mm thick) 2.0250 m2 90.00 182.25
Operator 0.0040 day 570.00 2.28
Helper 0.0020 day 400.00 0.80
Royalty of Earth 0.1164 m3 25.00 2.91
Foreman 0.0002 day 800.00 0.16
Skilled Labour 0.0040 day 450.00 1.80
Ordinary Labour 0.0800 day 370.00 29.60
H.C. of Sewing Machine 0.0040 day 500.00 2.00
H.C. of Cutter (Geo-Textile) 0.0025 day 500.00 1.25
Subtotal-A: 223.05
Cost of Polyproplene/ Nylon thread & other ( +5.00 % on Subtotal-A ) 11.15
consumables etc.
Subtotal-A1: 234.20
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 238.89
Note : Rates of all items should be inclusive of all supply and carriage. Page: 780 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.14.08.05 Geo-Textile Bag: Empty Bag Size: 1100mm x 850mm, Fill Volumn: bag
0.1333 cum & Weight: 200 Kg
Geo-Textile Grade: Grade-V-DF-60-3.0mm thick
Geo Textile (Grade-V-DF-60-3.0mm thick) 2.0700 m2 90.00 186.30
Operator 0.0040 day 570.00 2.28
Helper 0.0020 day 400.00 0.80
Royalty of Earth 0.1333 m3 25.00 3.33
Foreman 0.0002 day 800.00 0.16
Skilled Labour 0.0040 day 450.00 1.80
Ordinary Labour 0.0900 day 370.00 33.30
H.C. of Sewing Machine 0.0040 day 500.00 2.00
H.C. of Cutter (Geo-Textile) 0.0025 day 500.00 1.25
Subtotal-A: 231.22
Cost of Polyproplene/ Nylon thread & other ( +5.00 % on Subtotal-A ) 11.56
consumables etc.
Subtotal-A1: 242.78
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 247.64
Note : Rates of all items should be inclusive of all supply and carriage. Page: 781 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.14.08.06 Geo-Textile Bag: Empty Bag Size: 1300mm x 1050mm, Fill Volumn: bag
0.1664 cum & Weight: 250 Kg
Geo-Textile Grade: Grade-V-DF-60-3.0mm thick
Geo Textile (Grade-V-DF-60-3.0mm thick) 2.9700 m2 90.00 267.30
Operator 0.0040 day 570.00 2.28
Helper 0.0020 day 400.00 0.80
Royalty of Earth 0.1664 m3 25.00 4.16
Foreman 0.0002 day 800.00 0.16
Skilled Labour 0.0040 day 450.00 1.80
Ordinary Labour 0.1000 day 370.00 37.00
H.C. of Sewing Machine 0.0040 day 500.00 2.00
H.C. of Cutter (Geo-Textile) 0.0025 day 500.00 1.25
Subtotal-A: 316.75
Cost of Polyproplene/ Nylon thread & other ( +5.00 % on Subtotal-A ) 15.84
consumables etc.
Subtotal-A1: 332.59
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 339.24
Note : Rates of all items should be inclusive of all supply and carriage. Page: 782 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.14.09 Providing, preparing and laying of geogrid crated apron 1 m x 5 m, 600 cum
mm thick including excavation and backfilling with baffles at 1 m
interval, made with geogrids having , joining sides with connectors/ring
staples, top corners to be tie tensioned, placing of suitable cross interval
ties in layers of 300 mm connecting opposite side with lateral braces
and tied with polymer braids to avoid bulging, filled with stone with
minimum size of 200 mm and specific gravity not less than 2.65, packed
with stone spalls, keyed to the foundation recess in case of sloping
ground and laid over a layer of geotextile to prevent migration of fines,
all as per approved design and direction of E-I-C
Synthetic Geogrids as per approved design and specifications 7.0000 sqm 180.00 1260.00
Stone Boulder 1.3000 m3 3700.00 4810.00
Mason 0.0200 day 550.00 11.00
Skilled Labour 0.2000 day 450.00 90.00
Ordinary Labour 0.5000 day 370.00 185.00
Subtotal-A: 6356.00
Cost of material for miscellaneous items ( +20.00 % on Subtotal-A ) 1271.20
Connectors, Staples, Polymer braids, etc.
Subtotal-A1: 7627.20
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 7779.74
Note : Rates of all items should be inclusive of all supply and carriage. Page: 783 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.14.10 Construction of single/ double row bamboo spur, with full length borak
bamboo of specified dia. & length, at 0.3m c/c, two rows at 1.5m apart
(not applicable for single row spur) and stays with bamboo at 3 m apart
on the D/S side of the spur, single/ double (for length > 6m) row
runner with half split bamboo on both sides and also with double layer
cross tie at 3.0m interval, including 2.4m to 3.0m driving of bamboo
pins by monkey hammer, necessary staging etc. complete with supply
of all materials including local carriage within 150m and as per drawing
and direction of E-I-C.
Subtotal-A: 1616.35
Other consumables etc. ( +5.00 % on Subtotal-A ) 80.82
Subtotal-A1: 1697.16
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 1731.11
Note : Rates of all items should be inclusive of all supply and carriage. Page: 784 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.14.10.02 Double row bamboo spur: dia. = 75mm, Length = 3.0m to 4.5m m
Borak Bamboo (75mm dia) 29.7200 m 38.00 1129.36
Nails/ Nut bolts/ Screw/ Spikes 0.2000 kg 65.00 13.00
GI Wire (22 BWG) 0.0450 kg 90.00 4.05
H.C. of Driving Equipment 0.0100 day 350.00 3.50
H.C. of Engine Boat 0.0100 day 1000.00 10.00
Ordinary Labour 1.0000 day 370.00 370.00
Subtotal-A: 1529.91
Other consumables etc. ( +5.00 % on Subtotal-A ) 76.50
Subtotal-A1: 1606.41
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 1638.53
Note : Rates of all items should be inclusive of all supply and carriage. Page: 785 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.14.10.03 Double row bamboo spur: dia. = 75mm, Length = 4.5m to 6.0m m
Borak Bamboo (75mm dia) 44.4000 m 38.00 1687.20
Nails/ Nut bolts/ Screw/ Spikes 0.2500 kg 65.00 16.25
GI Wire (22 BWG) 0.0520 kg 90.00 4.68
H.C. of Driving Equipment 0.0650 day 350.00 22.75
H.C. of Engine Boat 0.1300 day 1000.00 130.00
Ordinary Labour 1.8600 day 370.00 688.20
Subtotal-A: 2549.08
Other consumables etc. ( +5.00 % on Subtotal-A ) 127.45
Subtotal-A1: 2676.53
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 2730.06
Note : Rates of all items should be inclusive of all supply and carriage. Page: 786 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.14.10.04 Double row bamboo spur: dia. = 100mm, Length = 7.5m to 11.0m m
Borak Bamboo (75mm to 100mm) 80.1000 m 42.00 3364.20
Nails/ Nut bolts/ Screw/ Spikes 0.3100 kg 65.00 20.15
GI Wire (22 BWG) 0.0520 kg 90.00 4.68
H.C. of Driving Equipment 0.0328 day 350.00 11.48
H.C. of Engine Boat 0.1312 day 1000.00 131.20
Ordinary Labour 2.0330 day 370.00 752.21
Subtotal-A: 4283.92
Other consumables etc. ( +5.00 % on Subtotal-A ) 214.20
Subtotal-A1: 4498.12
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 4588.08
Note : Rates of all items should be inclusive of all supply and carriage. Page: 787 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 529.50
Cost of material for miscellaneous items like ( +5.00 % on Subtotal-A ) 26.48
synthetic cord
Subtotal-A1: 555.98
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 567.09
4.14.12 JGT_RRC: Supplying and laying of woven type untreated double warp
plain weave jute geo-textile (JGT) of different grades conforming to BDS
1909: 2016 for strengthening subgrade of Road & Bridge approach
including local handling, unrolling, placing in position, ensuring proper
drapability (JGT should touch the ISG surface at all points), stapling JGT
by 6mm dia. U-shapped pegs/ hooknails or 37mm long mushroom
shaped nails at an interval of 300mm with overlaps of 100mm,
protecting the JGT from any other damages etc. all complete in all
respect as per instructions given in Annexure-A (JGT Installation
Guideline for Rural Road Construction) of BDS 1909 : 2016 and
approval of Engineer-In-Charge.
Note : Rates of all items should be inclusive of all supply and carriage. Page: 788 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 118.82
Cost of U-shaped peg, mashroom nails etc. ( +10.00 % on Subtotal-A ) 11.88
Subtotal-A1: 130.70
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 133.32
Note : Rates of all items should be inclusive of all supply and carriage. Page: 789 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 138.26
Cost of U-shaped peg, mashroom nails etc. ( +10.00 % on Subtotal-A ) 13.83
Subtotal-A1: 152.09
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 155.13
4.14.13 JGT_RBP: Supplying and laying of natural additive treated woven type
double warp plain weave jute geo-textile (JGT) conforming to BDS
1909: 2016 for river bank and slope protection work including local
handling, unrolling, placing in position, ensuring proper drapability (JGT
should touch the ground surface at all points), stapling JGT by 6mm dia.
U-shapped pegs/ hooknails or 37mm long mushroom shaped nails at an
interval of 300mm with overlaps of 100mm, protecting the JGT from
any other damages etc. all complete in all respect as per instructions
given in Annexure-B (JGT Installation Guideline for River Bank
Protection) of BDS 1909 : 2016 and approval of Engineer-In-Charge.
Note : Rates of all items should be inclusive of all supply and carriage. Page: 790 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.14.13.01 JGT_RBP-1: Applicable for mild to moderate River River Bank Protection sqm
work. This type of treated JGT shall have the following requirements.
Ends x Picks /dm ≥ 85 x 32, Width(m) ≥ 1, Mass per unit area (gsm) =
627 ± 15%, Thickness under 2 kPa pressure (mm) = 2.0 ± 20%, AOS
(O95) (μm) ≤ 150, Vertical Permeability (m/sec) ≥ 1.0 x10-3,
Horizontal Permeability (m/sec) ≥ 6.0 x10-3, Grab Tensile Strength (N)
MD x CD ≥ 950 x 230, Grab Tensile Elongation (%) MD x CD ≤ 35 x 45,
CBR Puncture Resistance (N) ≥ 2500, Wide Width Tensile Strength
(KN/m) MD x CD ≥ 20 x 10, Wide Width Elongation (%) MD x CD ≤ 12
x 10.
Jute Geo-Textile (JGT): Natural Additive Treated Double 1.0800 sqm 139.00 150.12
Warp Plain Weave - 627 gsm
Skilled Labour 0.0100 day 450.00 4.50
Ordinary Labour 0.0200 day 370.00 7.40
Subtotal-A: 162.02
Cost of U-shaped peg, mashroom nails etc. ( +10.00 % on Subtotal-A ) 16.20
Subtotal-A1: 178.22
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 181.79
Note : Rates of all items should be inclusive of all supply and carriage. Page: 791 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.14.14 JGT-HSM: Supplying and laying of open mesh Plain Weave jute geo-
textile (JGT) commonly known as Soil Saver of different grades
conforming to BDS 1909: 2016 for Hill Slope Management work
including local handling, unrolling, placing in position, unrolling of JGT in
the direction of surface run-off, stapling JGT by 6mm dia. U-shapped
hooknails at an interval of 300mm with overlaps of 100mm at the sides
and 150mm at the ends, anchoring JGT within a trench at the two ends
by filling the trench with big bats/gravel or other suitable materials,
ensuring proper drapability (JGT must touch the ground surface at all
points), filling drain materials immediately after laying of JGT, protecting
the JGT from any other damages etc. all complete in all respect as per
instructions given in Annexure-C (JGT Installation Guideline for Hill
Slope Management) of BDS 1909 : 2016 and approval of Engineer-In-
Charge.
Note : Rates of all items should be inclusive of all supply and carriage. Page: 792 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.14.14.01 JGT_HSM-1: Applicable for Moderate slope (≤35 degree) & annual sqm
rainfall ≤ 2000mm. This type of JGT shall have the following
requirements.
Ends x Picks /dm ≥ 6.5 x 4.5, Width(m) = 1.22, Mass per unit area
(gsm) = 500 ± 10%, Thickness under 2 kPa pressure (mm) = 4.5 ±
10%, Water Holding Capacity (% by weight) ≥ 400, Wide Width Tensile
Strength (kN/m) MD x CD ≥ 6.5 x 6.0, Wide Width Elongation (%) MD x
CD ≤ 14.0 x 14.0.
Jute Geo-Textile (JGT): Open Mesh Plain Weave (Soil Saver) - 1.0800 sqm 29.00 31.32
500 gsm
Skilled Labour 0.0100 day 450.00 4.50
Ordinary Labour 0.0200 day 370.00 7.40
Subtotal-A: 43.22
Cost of U-shaped peg, mashroom nails etc. ( +10.00 % on Subtotal-A ) 4.32
Subtotal-A1: 47.54
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 48.49
Note : Rates of all items should be inclusive of all supply and carriage. Page: 793 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.14.14.02 JGT_HSM-2: Applicable for Moderate slope (≤35 degree) & annual sqm
rainfall ≥ 2000mm and steep stope (>35 degree to ≤ 45 degree) &
annual rainfall ≤ 2000mm. This type of JGT shall have the following
requirements.
Ends x Picks /dm ≥ 8 x 7, Width(m) = 1.22, Mass per unit area (gsm) =
600±10%, Thickness under 2 kPa pressure (mm) = 5.5±10%, Water
Holding Capacity (% by weight) ≥ 400, Wide Width Tensile Strength
(kN/m) MD x CD ≥ 12.0 x 6.0, Wide Width Elongation (%) MD x CD ≤
14.0 x 14.0.
Jute Geo-Textile (JGT): Open Mesh Plain Weave (Soil Saver) - 1.0800 sqm 32.00 34.56
600 gsm
Skilled Labour 0.0100 day 450.00 4.50
Ordinary Labour 0.0200 day 370.00 7.40
Subtotal-A: 46.46
Cost of U-shaped peg, mashroom nails etc. ( +10.00 % on Subtotal-A ) 4.65
Subtotal-A1: 51.11
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 52.13
Note : Rates of all items should be inclusive of all supply and carriage. Page: 794 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.14.14.03 JGT_HSM-3: Applicable for steep stope (>35 degree to ≤ 45 degree) & sqm
annual rainfall > 2000mm. This type of JGT shall have the following
requirements.
Ends x Picks /dm ≥ 8 x 8, Width(m) = 1.22, Mass per unit area (gsm) =
700±10%, Thickness under 2 kPa pressure (mm) = 5.5±10%, Water
Holding Capacity (% by weight) ≥ 400, Wide Width Tensile Strength
(kN/m) MD x CD ≥ 14.0 x 7.0, Wide Width Elongation (%) MD x CD ≤
14.0 x 14.0.
Jute Geo-Textile (JGT): Open Mesh Plain Weave (Soil Saver) - 1.0800 sqm 35.00 37.80
700 gsm
Skilled Labour 0.0100 day 450.00 4.50
Ordinary Labour 0.0200 day 370.00 7.40
Subtotal-A: 49.70
Cost of U-shaped peg, mashroom nails etc. ( +10.00 % on Subtotal-A ) 4.97
Subtotal-A1: 54.67
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 55.76
Note : Rates of all items should be inclusive of all supply and carriage. Page: 795 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.14.15.01.01 For permanent use, cost of MS pipe is included in this unit rate. m
100mm dia MS pipe and wall thickness 4mm 1.0000 m 1300.00 1300.00
Subtotal-A: 1300.00
Stacking, Handling & other consumables ( +5.00 % on Subtotal-A ) 65.00
Subtotal-A1: 1365.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 1392.30
4.14.15.01.02 For temporary use, rent of MS pipe is included in this unit rate. m
H.C. of 100mm dia & 4mm thick MS pipe 1.0000 m/month 45.00 45.00
Subtotal-A: 45.00
Stacking, Handling & other consumables ( +5.00 % on Subtotal-A ) 2.25
Subtotal-A1: 47.25
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 48.20
Note : Rates of all items should be inclusive of all supply and carriage. Page: 796 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.14.15.02.01 For permanent use, cost of MS pipe is included in this unit rate. m
150mm dia. MS pipe and wall thickness 4mm 1.0000 m 1950.00 1950.00
Subtotal-A: 1950.00
Stacking, Handling & other consumables ( +5.00 % on Subtotal-A ) 97.50
Subtotal-A1: 2047.50
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 2088.45
4.14.15.02.02 For temporary use, rent of MS pipe is included in this unit rate. m
H.C. of 150mm dia & 4mm thick MS pipe 1.0000 m/month 65.00 65.00
Subtotal-A: 65.00
Stacking, Handling & other consumables ( +5.00 % on Subtotal-A ) 3.25
Subtotal-A1: 68.25
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 69.62
Note : Rates of all items should be inclusive of all supply and carriage. Page: 797 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.14.15.03.01 For permanent use, cost of MS pipe is included in this unit rate. m
200mm dia. MS pipe and wall thickness 6.5mm 1.0000 m 3510.00 3510.00
Subtotal-A: 3510.00
Stacking, Handling & other consumables ( +5.00 % on Subtotal-A ) 175.50
Subtotal-A1: 3685.50
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 3759.21
4.14.15.03.02 For temporary use, rent of MS pipe is included in this unit rate. m
H.C. of 200mm dia & 6.5mm thick MS pipe 1.0000 m/month 115.00 115.00
Subtotal-A: 115.00
Stacking, Handling & other consumables ( +5.00 % on Subtotal-A ) 5.75
Subtotal-A1: 120.75
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 123.17
Note : Rates of all items should be inclusive of all supply and carriage. Page: 798 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.14.16 Labour for driving MS steel pipes of any size up to required depth with m
monkey, power winch etc. including all necessary tools, equipment and
accessories and hoisting piles in true & vertical position etc. all complete
as per direction of E-I-C.
Skilled Labour 0.0500 day 450.00 22.50
Ordinary Labour 0.2000 day 370.00 74.00
H.C. of Tripod and Mechanical Winch Machine complete with 0.0500 day 3000.00 150.00
power unit and accessories
H.C. of Derrick 0.0500 day 400.00 20.00
Diesel 0.2500 liter 68.00 17.00
Lubricant 0.0100 liter 220.00 2.20
Subtotal-A: 285.70
Other consumables etc. ( +5.00 % on Subtotal-A ) 14.29
Subtotal-A1: 299.99
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 305.98
Note : Rates of all items should be inclusive of all supply and carriage. Page: 799 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.14.17 Labour for extraction of MS steel/ micro pipes of any size with monkey, m
power winch etc. including all necessary tools, equipment and
accessories all complete as per direction of E-I-C.
Skilled Labour 0.0500 day 450.00 22.50
Ordinary Labour 0.2000 day 370.00 74.00
H.C. of Tripod and Mechanical Winch Machine complete with 0.0300 day 3000.00 90.00
power unit and accessories
H.C. of Derrick 0.0300 day 400.00 12.00
Diesel 0.2500 liter 68.00 17.00
Lubricant 0.0100 liter 220.00 2.20
Subtotal-A: 217.70
Other consumables etc. ( +5.00 % on Subtotal-A ) 10.89
Subtotal-A1: 228.59
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 233.16
4.14.18 Labour charge for taking out bullah from river bed (measurement for
the driven portion to be taken only); or cross ties walling pieces,
including cutting and opening out bolts and nuts; or old bamboo pieces
and struts from river bed and stacking the materials on the bank as per
direction of E-I-C.
Note : Rates of all items should be inclusive of all supply and carriage. Page: 800 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.14.18.01 Bullah m
Ordinary Labour 0.0950 day 370.00 35.15
Subtotal-A: 35.15
Other consumables etc. ( +5.00 % on Subtotal-A ) 1.76
Subtotal-A1: 36.91
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 37.65
Subtotal-A: 9.25
Other consumables etc. ( +5.00 % on Subtotal-A ) 0.46
Subtotal-A1: 9.71
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 9.91
Note : Rates of all items should be inclusive of all supply and carriage. Page: 801 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 7.40
Other consumables etc. ( +5.00 % on Subtotal-A ) 0.37
Subtotal-A1: 7.77
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 7.93
Note : Rates of all items should be inclusive of all supply and carriage. Page: 802 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.15.01 Providing and erecting a "W" metal beam crash barrier comprising of 3 m
mm thick corrugated sheet metal beam rail, 70 cm above road/ground
level, fixed on channel vertical post, 150 x 75 x 5 mm spaced 2 m
centre to centre, 1.8 m high, 1.10 m below ground/road level, all steel
parts and fittings to be galvanised by hot dip process (zinc coated, 550
gsm, minimum single spot), all fittings to conform to AASHTO M 180,
metal beam rail to be fixed on the vertical post with a spacer of channel
section 150 x 75 x 5 mm, 330 mm long etc. all complete as per
specification & direction of the Engineer in charge.
Corrugated sheet,3 mm thick, "W" beam section railing 9.1578 kg 150.00 1373.67
Channel post 150 x 75 x 5 mm,1.8 long 19.6800 kg 120.00 2361.60
Spacer 150 x 75 x 5 mm channel 0.33 m long, 3.6089 kg 120.00 433.07
Nails/ Nut bolts/ Screw/ Spikes 4.4444 kg 65.00 288.89
Foreman 0.0133 day 800.00 10.64
Welder 0.1111 day 680.00 75.55
Skilled Labour 0.2222 day 450.00 99.99
H.C. of Flat Body Truck (3 tons) 0.0028 day 2000.00 5.60
Subtotal-A: 4649.00
Cost of material for fabrication, nuts, bolts and ( +25.00 % on Subtotal-A ) 1162.25
washers etc.
Subtotal-A1: 5811.25
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 5927.48
Note : Rates of all items should be inclusive of all supply and carriage. Page: 803 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.15.02 Providing and erecting a "Thrie" metal beam crash barrier comprising of m
3 mm thick corrugated sheet metal rail, 70 cm above road/ground level,
fixed on channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to
centre, 1.8 m high with 1.15 m below ground level, all steel parts and
fitments to be galvanised by hot dip process (zinc coated, 550 gsm,
minimum single spot), all fittings to conform to AASHTO M 180, metal
rail to be fixed on the vertical post with a spacer of channel section 150
x 75 x 5 mm, 546 mm long etc. all complete as per specification &
direction of the E-I-C.
Corrugated sheet,3 mm thick, "W" beam section railing 16.2089 kg 150.00 2431.34
Channel post 150 x 75 x 5 mm,1.8 long 21.8667 kg 120.00 2624.00
Spacer 150 x 75 x 5 mm channel 0.33 m long, 5.9689 kg 120.00 716.27
Nails/ Nut bolts/ Screw/ Spikes 6.6667 kg 65.00 433.34
Foreman 0.0133 day 800.00 10.64
Welder 0.1111 day 680.00 75.55
Skilled Labour 0.2222 day 450.00 99.99
H.C. of Flat Body Truck (3 tons) 0.0028 day 2000.00 5.60
Subtotal-A: 6396.72
Cost of material for fabrication, nuts, bolts and ( +15.00 % on Subtotal-A ) 959.51
washers etc.
Subtotal-A1: 7356.23
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 7503.35
Note : Rates of all items should be inclusive of all supply and carriage. Page: 804 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.15.03 Supplying fitting and fixing railing & rail post made of various dia MS
pipes of standard thickness for normal, ornamental Bridge or any other
structure including required ms plate, nutbolt, cutting, welding, painting
with anticorrosive paint, laying in position etc. all complete as per
design, drawing, spacification & the direction of the E-I-C.
Subtotal-A: 707.50
Workshop Charges, Anti corrosive paint & ( +25.00 % on Subtotal-A ) 176.88
other costing
Subtotal-A1: 884.38
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 902.06
Note : Rates of all items should be inclusive of all supply and carriage. Page: 805 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 847.50
Workshop Charges, Anti corrosive ( +25.00 % on Subtotal-A ) 211.88
paint & other costing
Subtotal-A1: 1059.38
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 1080.56
Subtotal-A: 1367.50
Workshop Charges, Anti corrosive paint & other ( +25.00 % on Subtotal-A ) 341.88
costing
Subtotal-A1: 1709.38
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 1743.56
Note : Rates of all items should be inclusive of all supply and carriage. Page: 806 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 2017.50
Workshop Charges, Anti corrosive paint & other ( +25.00 % on Subtotal-A ) 504.38
costing
Subtotal-A1: 2521.88
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 2572.31
Subtotal-A: 3577.50
Workshop Charges, Anti corrosive paint & ( +25.00 % on Subtotal-A ) 894.38
other costing
Subtotal-A1: 4471.88
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 4561.31
Note : Rates of all items should be inclusive of all supply and carriage. Page: 807 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.15.04 Supplying fitting and fixing railing & rail post made of various size MS
Square Box of standard thickness for normal & ornamental Bridge or
any other structure, including required ms plate, nut-bolt, cutting,
welding, painting with anticorrosive paint, laying in position, etc. all
complete as per design, drawing, spacification & the direction of the E-I-
C.
Subtotal-A: 417.50
Workshop Charges, Anti corrosive paint & other ( +25.00 % on Subtotal-A ) 104.38
costing
Subtotal-A1: 521.88
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 532.31
Note : Rates of all items should be inclusive of all supply and carriage. Page: 808 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 542.50
Workshop Charges, Anti corrosive paint & other ( +25.00 % on Subtotal-A ) 135.63
costing
Subtotal-A1: 678.13
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 691.69
Subtotal-A: 937.50
Workshop Charges, Anti corrosive paint & other ( +25.00 % on Subtotal-A ) 234.38
costing
Subtotal-A1: 1171.88
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 1195.31
Note : Rates of all items should be inclusive of all supply and carriage. Page: 809 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 1117.50
Workshop Charges, Anti corrosive paint & other ( +25.00 % on Subtotal-A ) 279.38
costing
Subtotal-A1: 1396.88
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 1424.81
Subtotal-A: 1787.50
Workshop Charges, Anti corrosive paint & other ( +25.00 % on Subtotal-A ) 446.88
costing
Subtotal-A1: 2234.38
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 2279.06
Note : Rates of all items should be inclusive of all supply and carriage. Page: 810 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 2292.50
Workshop Charges, Anti corrosive paint & other ( +25.00 % on Subtotal-A ) 573.13
costing
Subtotal-A1: 2865.63
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 2922.94
Subtotal-A: 2817.50
Workshop Charges, Anti corrosive paint & other ( +25.00 % on Subtotal-A ) 704.38
costing
Subtotal-A1: 3521.88
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 3592.31
Note : Rates of all items should be inclusive of all supply and carriage. Page: 811 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 3417.50
Workshop Charges, Anti corrosive paint & other ( +25.00 % on Subtotal-A ) 854.38
costing
Subtotal-A1: 4271.88
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 4357.31
Subtotal-A: 3287.50
Workshop Charges, Anti corrosive paint & other ( +25.00 % on Subtotal-A ) 821.88
costing
Subtotal-A1: 4109.38
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 4191.56
Note : Rates of all items should be inclusive of all supply and carriage. Page: 812 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 4017.50
Workshop Charges, Anti corrosive paint & other ( +25.00 % on Subtotal-A ) 1004.38
costing
Subtotal-A1: 5021.88
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 5122.31
Note : Rates of all items should be inclusive of all supply and carriage. Page: 813 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.15.05 Supplying & providing flexible and acrylic type reflectorized traffic sqm
painting/ coating on rail post, rail bar, wheel guard, Pier column etc.
including surface preparation, applying paint, all materials, labour
charges, tools, equipment etc. all complete as per specification &
direction of the E-I-C.
Reflectorized paint 0.1200 liter 2528.00 303.36
Sealer/Primer (for texture paint) 0.0900 litre 200.00 18.00
Plumber/ Electric Mistry/ Painter 0.1500 day 680.00 102.00
Helper of Plumber/ Electric Mistry/ Painter/ Carpenter/ 0.1500 day 470.00 70.50
Operator
Subtotal-A: 493.86
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 503.74
Note : Rates of all items should be inclusive of all supply and carriage. Page: 814 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 13088.00
Cost of pipe bending, reducer, scaffolding etc. ( +25.00 % on Subtotal-A ) 3272.00
Cost of two coats of alluminium paint over steel ( +2.50 % on Subtotal-A ) 327.20
circular hollow pipe
Subtotal-A1: 16687.19
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 17020.94
Note : Rates of all items should be inclusive of all supply and carriage. Page: 815 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Note : Rates of all items should be inclusive of all supply and carriage. Page: 816 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 17419.50
Cost of Excavation, concreting, pipe bending, ( +25.00 % on Subtotal-A ) 4354.87
reducer, scaffolding etc.
Cost of two coats of alluminium paint over steel ( +2.50 % on Subtotal-A ) 435.49
circular hollow pipe
Subtotal-A1: 22209.86
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 22654.05
Note : Rates of all items should be inclusive of all supply and carriage. Page: 817 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 15079.50
Cost of Excavation, concreting, pipe bending, ( +25.00 % on Subtotal-A ) 3769.87
reducer, scaffolding etc.
Cost of two coats of alluminium paint over steel ( +2.50 % on Subtotal-A ) 376.99
circular hollow pipe
Subtotal-A1: 19226.36
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 19610.88
Note : Rates of all items should be inclusive of all supply and carriage. Page: 818 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 2393.84
Cost for form work for casting in casting yard ( +5.00 % on Subtotal-A ) 119.69
Cost for handling and fixing of precast panels in ( +5.00 % on Subtotal-A ) 119.69
position
Subtotal-A1: 2633.22
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 2685.89
Note : Rates of all items should be inclusive of all supply and carriage. Page: 819 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 2266.06
Cost of formwork ( +5.00 % on Subtotal-A ) 113.30
Subtotal-A1: 2379.36
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 2426.95
4.15.09 Supplying fitting and fixing railing & rail post made of various dia
Stainless Steel (SS) pipes of standard thickness for normal , ornamental
Bridge or any other structure including required SS plate, nutbolt,
cutting, welding, laying in position etc. all complete as per design,
drawing,spacification & the direction of the Engineer in charge.
Note : Rates of all items should be inclusive of all supply and carriage. Page: 820 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 402.50
Workshop Charges, & other consumables. ( +25.00 % on Subtotal-A ) 100.63
Subtotal-A1: 503.13
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 513.19
Subtotal-A: 777.50
Workshop Charges, & other consumables. ( +25.00 % on Subtotal-A ) 194.38
Subtotal-A1: 971.88
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 991.31
Note : Rates of all items should be inclusive of all supply and carriage. Page: 821 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 1027.50
Workshop Charges, & other consumables. ( +25.00 % on Subtotal-A ) 256.88
Subtotal-A1: 1284.38
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 1310.06
Subtotal-A: 1517.50
Workshop Charges, & other consumables. ( +25.00 % on Subtotal-A ) 379.38
Subtotal-A1: 1896.88
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 1934.81
Note : Rates of all items should be inclusive of all supply and carriage. Page: 822 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 1767.50
Workshop Charges, & other consumables. ( +25.00 % on Subtotal-A ) 441.88
Subtotal-A1: 2209.38
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 2253.56
Subtotal-A: 2517.50
Workshop Charges, & other consumables. ( +25.00 % on Subtotal-A ) 629.38
Subtotal-A1: 3146.88
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 3209.81
Note : Rates of all items should be inclusive of all supply and carriage. Page: 823 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 3267.50
Workshop Charges, & other consumables. ( +25.00 % on Subtotal-A ) 816.88
Subtotal-A1: 4084.38
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 4166.06
4.15.10 Supplying fitting and fixing railing & rail post made of various size
Stainless Steel (SS) Square/Rectangular Box of standard thickness for
normal & ornamental Bridge or any other structure, including required
SS plate, nutbolt, cutting, welding, laying in position, etc. all complete
as per design, drawing, spacification & the direction of the Engineer in
charge.
Note : Rates of all items should be inclusive of all supply and carriage. Page: 824 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.15.10.01 Size: 25mm x 25mm Stainless Steel box and wall thickness 2.00mm m
25mm x 25mm Stainless Steel box and wall thickness 2.00mm 1.0000 m 570.00 570.00
Skilled Labour 0.1500 day 450.00 67.50
Subtotal-A: 637.50
Size: 50mm x 50mm Stainless Steel box and wall ( +25.00 % on Subtotal-A ) 159.38
thickness 2.00mm
Subtotal-A1: 796.88
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 812.81
4.15.10.02 Size: 32mm x 32mm Stainless Steel box and wall thickness 1.50mm m
32mm x 32mm Stainless Steel box and wall thickness 1.50mm 1.0000 m 555.00 555.00
Skilled Labour 0.1500 day 450.00 67.50
Subtotal-A: 622.50
Size: 50mm x 50mm Stainless Steel box and wall ( +25.00 % on Subtotal-A ) 155.63
thickness 2.00mm
Subtotal-A1: 778.13
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 793.69
Note : Rates of all items should be inclusive of all supply and carriage. Page: 825 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.15.10.03 Size: 38mm x 38mm Stainless Steel box and wall thickness 2.50mm m
38mm x 38mm Stainless Steel box and wall thickness 2.50mm 1.0000 m 915.00 915.00
Skilled Labour 0.1500 day 450.00 67.50
Subtotal-A: 982.50
Size: 50mm x 50mm Stainless Steel box and wall ( +25.00 % on Subtotal-A ) 245.63
thickness 2.00mm
Subtotal-A1: 1228.13
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 1252.69
4.15.10.04 Size: 50mm x 50mm Stainless Steel box and wall thickness 2.00mm m
50mm x 50mm Stainless Steel box and wall thickness 2.00mm 1.0000 m 1150.00 1150.00
Skilled Labour 0.1500 day 450.00 67.50
Subtotal-A: 1217.50
Size: 50mm x 50mm Stainless Steel box and wall ( +25.00 % on Subtotal-A ) 304.38
thickness 2.00mm
Subtotal-A1: 1521.88
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 1552.31
Note : Rates of all items should be inclusive of all supply and carriage. Page: 826 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.15.10.05 Size: 62.5mm x 62.5mm Stainless Steel box and wall thickness 2.00mm m
62.5mm x 62.5mm Stainless Steel box and wall thickness 1.0000 m 1495.00 1495.00
2.00mm
Skilled Labour 0.1500 day 450.00 67.50
Subtotal-A: 1562.50
Size: 50mm x 50mm Stainless Steel box and wall ( +25.00 % on Subtotal-A ) 390.63
thickness 2.00mm
Subtotal-A1: 1953.13
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 1992.19
4.15.10.06 Size: 50mm x 25mm Stainless Steel box and wall thickness 1.50mm m
50mm x 25mm Stainless Steel box and wall thickness 1.50mm 1.0000 m 680.00 680.00
Skilled Labour 0.1500 day 450.00 67.50
Subtotal-A: 747.50
Size: 50mm x 50mm Stainless Steel box and wall ( +25.00 % on Subtotal-A ) 186.88
thickness 2.00mm
Subtotal-A1: 934.38
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 953.06
Note : Rates of all items should be inclusive of all supply and carriage. Page: 827 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.15.10.07 Size: 75mm x 25mm Stainless Steel box and wall thickness 1.50mm m
75mm x 25mm Stainless Steel box and wall thickness 1.50mm 1.0000 m 910.00 910.00
Skilled Labour 0.1500 day 450.00 67.50
Subtotal-A: 977.50
Size: 50mm x 50mm Stainless Steel box and wall ( +25.00 % on Subtotal-A ) 244.38
thickness 2.00mm
Subtotal-A1: 1221.88
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 1246.31
4.15.10.08 Size: 75mm x 50mm Stainless Steel box and wall thickness 2.00mm m
75mm x 50mm Stainless Steel box and wall thickness 2.00mm 1.0000 m 1405.00 1405.00
Skilled Labour 0.1500 day 450.00 67.50
Subtotal-A: 1472.50
Size: 50mm x 50mm Stainless Steel box and wall ( +25.00 % on Subtotal-A ) 368.13
thickness 2.00mm
Subtotal-A1: 1840.63
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 1877.44
Note : Rates of all items should be inclusive of all supply and carriage. Page: 828 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.15.10.09 Size: 100mm x 50mm Stainless Steel box and wall thickness 2.00mm m
100mm x 50mm Stainless Steel box and wall thickness 1.0000 m 1765.00 1765.00
2.00mm
Skilled Labour 0.1500 day 450.00 67.50
Subtotal-A: 1832.50
Size: 50mm x 50mm Stainless Steel box and wall ( +25.00 % on Subtotal-A ) 458.13
thickness 2.00mm
Subtotal-A1: 2290.63
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 2336.44
Note : Rates of all items should be inclusive of all supply and carriage. Page: 829 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.15.11 Painting on Concrete Surface: Providing and applying 2 coats of water sqm
based cement paint to unplastered concrete surface after cleaning the
surface of dirt, dust, oil, grease, efflorescence and applying paint @ 1
litre for 2 sqm including cost of all materialas, labour etc. complete as
per direction of the E-I-C.
Cement Paint 0.5000 kg 80.00 40.00
Plumber/ Electric Mistry/ Painter 0.0010 day 680.00 0.68
Helper of Plumber/ Electric Mistry/ Painter/ Carpenter/ 0.0250 day 470.00 11.75
Operator
Skilled Labour 0.0250 day 450.00 11.25
Subtotal-A: 63.68
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 64.95
Note : Rates of all items should be inclusive of all supply and carriage. Page: 830 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 5710.00
Wooden packing, Scaffolding Works etc. ( +20.00 % on Subtotal-A ) 1142.00
Subtotal-A1: 6852.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 6989.04
Note : Rates of all items should be inclusive of all supply and carriage. Page: 831 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 6960.00
Wooden packing, Scaffolding Works etc. ( +20.00 % on Subtotal-A ) 1392.00
Subtotal-A1: 8352.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 8519.04
Note : Rates of all items should be inclusive of all supply and carriage. Page: 832 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 11960.00
Wooden packing, Scaffolding Works etc. ( +20.00 % on Subtotal-A ) 2392.00
Subtotal-A1: 14352.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 14639.04
Note : Rates of all items should be inclusive of all supply and carriage. Page: 833 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 279.50
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 285.09
4.16.02.02 Bituminous wearing course of avg. 50mm thick asphaltic concrete laid sqm
over 12 mm thick mastic asphalt
Skilled Labour 0.0500 day 450.00 22.50
Ordinary Labour 0.4000 day 370.00 148.00
Air Compressor 250 cfm with pneumatic breaker/ jack 0.0200 day 2500.00 50.00
hammer along with accessories.
H.C. of Tractor (2 WD) 0.0100 day 2200.00 22.00
Subtotal-A: 242.50
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 247.35
Note : Rates of all items should be inclusive of all supply and carriage. Page: 834 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 162.76
Carriage, safe storage, mixing, cleaning, H.C. of ( +20.00 % on Subtotal-A ) 32.55
Injecting equipment & sundries etc.
Subtotal-A1: 195.31
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 199.22
Note : Rates of all items should be inclusive of all supply and carriage. Page: 835 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 167.46
Carriage, safe storage, mixing, cleaning, H.C. of ( +20.00 % on Subtotal-A ) 33.49
Injecting equipment & sundries etc.
Subtotal-A1: 200.95
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 204.96
Note : Rates of all items should be inclusive of all supply and carriage. Page: 836 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 698.75
H.C. of Epoxy Injection Gun, Carriage, safe ( +20.00 % on Subtotal-A ) 139.75
storage, mixing, cleaning & sundries etc.
Subtotal-A1: 838.50
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 855.27
Note : Rates of all items should be inclusive of all supply and carriage. Page: 837 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.16.05 Shotcrete/ guniting concrete surface with 40mm thick (avg.) cement sqm
mortar comprising of cement, graded sand conforming to ASTM C 33,
coarse aggregate (20 to 40% of total aggregate for thick sections if
adequate guniting equptment is available), water and quick setting
compound conforming to ASTM C 1141 in the proportion as per
guidence of Central Quality Control Laboratory (CQCL), LGED or any
approved laboratory instructed by Engineer-in-Charge, water cement
ratio ranging from 0.35 to 0.5, density of shotcrete/ gunite not less than
2000kg/cum, strength not less than 25 MPa, applied with compressed
air under pressure after cleaning removing old guniting/ part of
defective concrete, cleaning the surface and exposed reinforcement
thoroughly by sand blasting, spraying with epoxy conforming to ASTM C
881 @ 67 kg/sqm including cost of wire mesh fabrics 50mm x 50mm x
10 BWG in first layer of guniting complete as per drawings & direction of
E-I-C. Wherever the reinforcement have been corroded, the same shall
be removed and replaced by additional reinforcement.
Ordinary Portland Cement (CEM I, 52.5N) 0.3200 bag 455.00 145.60
Sand (FM - 2.5) 0.0400 m3 1500.00 60.00
Epoxy resin-hardner mix for prime/seal coat conforming to 0.6700 kg 785.00 525.95
ASTM C 881/ AASHTO M 235
Quick Setting Compound 0.6400 Kg 160.00 102.40
10 BWG wire reinforcement 2.0000 kg 90.00 180.00
Mason 0.1000 day 550.00 55.00
Skilled Labour 0.1250 day 450.00 56.25
Ordinary Labour 0.2000 day 370.00 74.00
Air Compressor 250 cfm with pneumatic breaker/ jack 0.0125 day 2500.00 31.25
hammer along with accessories.
H.C. of Shotcreting equipment 0.1000 hour 500.00 50.00
H.C. of Water Tanker (Towed by Tractor) 0.0100 day 1500.00 15.00
Subtotal-A: 1295.45
Misellaneous consumables like nozzles, wire brush, ( +5.00 % on Subtotal-A ) 64.77
cotton waste etc.
Note : Rates of all items should be inclusive of all supply and carriage. Page: 838 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A1: 1360.22
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 1387.43
4.16.06 Patching of damages concrete surface with 25mm thick (avg.) polymer sqm
concrete and curing compounds, initiator and promoter, available in
present formulations, to be applied as per instruction of manufacturer
and as approved by the E-I-C. This item is a proprietory item available
in market as pre-packed plymer concrete and is required to be applied
as per instructions of the manufacturer.
Acrylic Polymer Bonding Agent 0.1400 liter 160.00 22.40
Pre-packed cement based polymer mortar of strength 45 Mpa 3.1500 kg 100.00 315.00
at 28 days
Mason 0.1000 day 550.00 55.00
Skilled Labour 0.5000 day 450.00 225.00
Ordinary Labour 1.0000 day 370.00 370.00
H.C. of Grout pump with agitator & accessories 1.0000 hour 200.00 200.00
Subtotal-A: 1187.40
Misellaneous consumables like wire brush, cotton ( +20.00 % on Subtotal-A ) 237.48
waste etc.
Subtotal-A1: 1424.88
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 1453.38
Note : Rates of all items should be inclusive of all supply and carriage. Page: 839 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.16.07 Providing and applying 10mm thick (avg.) pre-packed cement based sqm
polymer mortar of strength 45 MPa at 28 days by trowels & float over
the spalled concrete for bridge deck, pier cap etc. including scaffolding,
shuttering, supplying required material including polymer etc. complete
as per the specification & as directed by E-I-C. Primer coat by Nylon
brush must be applied on the spalled out concrete location before
applying polymer mortar.
Acrylic Polymer Bonding Agent 0.1400 liter 160.00 22.40
Pre-packed cement based polymer mortar of strength 45 Mpa 1.2000 kg 100.00 120.00
at 28 days
Mason 0.1000 day 550.00 55.00
Skilled Labour 0.2000 day 450.00 90.00
Ordinary Labour 0.4000 day 370.00 148.00
Subtotal-A: 435.40
Misellaneous consumables like wire brush, cotton ( +5.00 % on Subtotal-A ) 21.77
waste, wastage of chemical etc.
Subtotal-A1: 457.17
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 466.31
Note : Rates of all items should be inclusive of all supply and carriage. Page: 840 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.16.08 EBA: Providing & applying epoxy bonding agent conforming to ASTM C sqm
881/ AASHTO M 235 to exposed old concrete surfaces for bonding of
freshly mixed concrete to hardened concrete at the rate of 0.80 Kg/sqm
or as per manufacturer's recommendation with pot life not less than 60-
90 minutes at normal temperature including cost of materials, storage,
labour, tools, lead lifts, preparation of surface, cleaning the surface,
tackles etc. complete as per manufacturer's specification and as directed
& instructed by Engineer-In-charge.
Epoxy resin-hardner mix for prime/seal coat conforming to 0.8000 kg 785.00 628.00
ASTM C 881/ AASHTO M 235
Mason 0.1000 day 550.00 55.00
Skilled Labour 0.1250 day 450.00 56.25
Ordinary Labour 0.2500 day 370.00 92.50
Subtotal-A: 831.75
Carriage, safe storage, wastage, mixing & sundries ( +4.00 % on Subtotal-A ) 33.27
etc.
Subtotal-A1: 865.02
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 882.32
Note : Rates of all items should be inclusive of all supply and carriage. Page: 841 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.16.09 Applying epoxy mortar over leached, honey combed and spalled sqm
concrete surface and exposed steel reinforcement complete as per
direction of E-I-C. Thickness of epoxy mortar shall not be less than
10mm
Epoxy resin-hardner mix for prime/seal coat conforming to 0.2500 kg 785.00 196.25
ASTM C 881/ AASHTO M 235
Epoxy mortar 0.2200 kg 275.00 60.50
Epoxy resin-hardner mix for prime/seal coat conforming to 0.2000 kg 785.00 157.00
ASTM C 881/ AASHTO M 235
Mason 0.1000 day 550.00 55.00
Skilled Labour 0.1250 day 450.00 56.25
Ordinary Labour 0.2500 day 370.00 92.50
Subtotal-A: 617.50
Carriage, safe storage, wastage, mixing & sundries ( +5.00 % on Subtotal-A ) 30.88
etc.
Subtotal-A1: 648.38
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 661.34
Note : Rates of all items should be inclusive of all supply and carriage. Page: 842 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 2574.15
Labour for epoxy application etc. ( +5.00 % on Subtotal-A ) 128.71
Subtotal-A1: 2702.86
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 2756.91
Note : Rates of all items should be inclusive of all supply and carriage. Page: 843 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.16.11 Clearing slab/ box/ pipe culverts including cleaning and reshapping of cum
both upstream and down stream faces of existing culvert with in right of
way by removing deposited debris, silt, soil and any other foreign
material. The job includes safe disposal of excess material recovered
from site including vegetation outside ROW with all leads and lifts
complete in all respect as per direction of Engineer In-Charge.
Frequency of cleaning will be one time in a year i.e. before start of
monsoon.
Skilled Labour 0.0333 day 450.00 14.99
Ordinary Labour 0.1667 day 370.00 61.68
H.C. of Tractor (2 WD) 0.0042 day 2200.00 9.24
Subtotal-A: 85.90
Cost of Hand Tools etc. ( +5.00 % on Subtotal-A ) 4.30
Subtotal-A1: 90.20
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 92.00
Note : Rates of all items should be inclusive of all supply and carriage. Page: 844 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 19.30
Cost of Hand Tools etc. ( +5.00 % on Subtotal-A ) 0.97
Subtotal-A1: 20.27
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 20.67
Note : Rates of all items should be inclusive of all supply and carriage. Page: 845 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 2600.86
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 2652.88
Note : Rates of all items should be inclusive of all supply and carriage. Page: 846 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.16.14 Carrying out repair of RCC railing of 25 MPa concrete to bring it to the m
original shape including dismantling and trimming the surface to a
regular shape and removal of damaged material as per Bridge Design
Standard for LGED, 2012 and direction of E-I-C.
[Note: It is assumed that damage is to the extent of 10%]
RCC-25SCCM: Reinforced cement concrete work with 0.0100 cum 10923.59 109.24
minimum cement content ralates to mix ratio 1:1.5:3 and
maximum water cement ratio 0.4 having minimum required
average strength, f'cr = 33.5 Mpa and
sa.............4.09.03.06.02
Supplying and fabrication of Ribbed or deformed bar 1.3000 kg 65.67 85.37
reinforcement conforming to BDS ISO 6935-2:2006 (Grade
400)………….(4.11.01.04)
Skilled Labour 0.0016 day 450.00 0.72
Ordinary Labour 0.0200 day 370.00 7.40
Subtotal-A: 202.73
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 206.78
Note : Rates of all items should be inclusive of all supply and carriage. Page: 847 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.16.15 Micro Concrete Work: Providing and laying in position Micro concrete cum
having minimum compressive strength 50 MPa after 28 days (as per
ASTM C 109), tensile strength 2 MPa after 28 days (as per ASTM C 307)
and flexular strength 5 MPa after 28 days (as per ASTM C 580), cement
based prepacked single component, chloride free, non shrink, free flow,
self compacting, ready to use after mixing water in specified proportion
obtained from approved manufacture including water tight shuttering
and scaffolding etc. complete as per specification and as per direction of
Engineer-in-charge.
Micro Concrete (25 kg ) 50.5122 bag 1850.00 93447.57
Stone Chips (12mm down graded) [LAA≤25] 0.8301 cum 4640.00 3851.66
H.C. of Concrete Mixture Machine (Capacity 0.40/ 0.28 cum) 0.3532 day 1200.00 423.84
Head Mason 0.3532 day 650.00 229.58
Mason 0.7065 day 550.00 388.58
Skilled Labour 1.4129 day 450.00 635.81
Ordinary Labour 5.6517 day 370.00 2091.13
Subtotal-A: 101068.16
Steel Formwork/ shuttering, prop with necessary ( +2.00 % on Subtotal-A ) 2021.36
supports etc.
Subtotal-A1: 103089.53
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 105151.32
Note : Rates of all items should be inclusive of all supply and carriage. Page: 848 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.16.16.01 CBA_8: Diameter of Rebar = 8mm, minimum drilling diameter = 14mm, each
minimum drilling depth = 80mm
Epoxy resin based anchoring mortar for fixing heavy loads 0.0159 Cartridge 2700.00 42.93
H.C. of Vertical Drill Machine 0.0053 day 150.00 0.80
Operator 0.0053 day 570.00 3.02
Helper of Plumber/ Electric Mistry/ Painter/ Carpenter/ 0.0053 day 470.00 2.49
Operator
Mason 0.0053 day 550.00 2.92
Skilled Labour 0.0106 day 450.00 4.77
Subtotal-A: 56.92
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 58.06
Note : Rates of all items should be inclusive of all supply and carriage. Page: 849 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 85.16
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 86.86
Note : Rates of all items should be inclusive of all supply and carriage. Page: 850 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 123.51
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 125.98
Note : Rates of all items should be inclusive of all supply and carriage. Page: 851 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 223.71
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 228.18
Note : Rates of all items should be inclusive of all supply and carriage. Page: 852 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 447.54
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 456.49
Note : Rates of all items should be inclusive of all supply and carriage. Page: 853 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 1193.21
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 1217.08
Note : Rates of all items should be inclusive of all supply and carriage. Page: 854 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 1790.04
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 1825.84
4.16.17 EP: Providing external prestressing with high tensile steel wires/strands
including drilling for passage of prestessing steel, all accessories for
stressing and stressing operation and grouting complete as per drawing
and Technical specification.
[This item shall be selected as per instruction given in the drawing &
after getting approval from Desing Unit, LGED.]
Note : Rates of all items should be inclusive of all supply and carriage. Page: 855 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 263914.00
Cost of achorage set, bearing plate, permanent ( +20.00 % on Subtotal-A ) 52782.80
wedges, lead sheet, sleeves, deviator fixtures etc.
Subtotal-A1: 316696.80
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 323030.74
Note : Rates of all items should be inclusive of all supply and carriage. Page: 856 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 795934.50
Cost of achorage set, bearing plate, permanent ( +20.00 % on Subtotal-A ) 159186.90
wedges, lead sheet, sleeves, deviator fixtures etc.
Subtotal-A1: 955121.40
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 974223.83
Note : Rates of all items should be inclusive of all supply and carriage. Page: 857 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.17.01 Supplying and laying machine made pre-cast RCC pipes with collars of
different diameter, length & thickness including screening, grading and
washing aggregates with clear water, mixing, laying in steel forms,
placing re-bars in position, consolidating, curing for at least 14 days
including the cost of formwork, lifting, loading and unloading from
factory/ yard, laying in position etc including tools, plants, testing etc. all
complete as per direction of the E-I-C. The collars shall be of 200mm
wide made by RCC and having the same strength as the pipes to be
jointed. The spirals shall end in a complete ring/ turn at both the ends
of pipes and collars. The cost of reinforcement and it's fabrication,
welding, coupling, placing, binding etc. is included in this unit rate.
4.17.01.01 For Light/ Medium Traffic: Cross drains/ culverts/ outlet and any other
works carrying light traffic in leanest mix 1:1.5:3 with cement
conforming to BDS EN 197-1 : 2003 CEM-II/A-L/M/V/W 42.5N, 20mm
down well graded picked brick chips, sand of minimum FM 2.5 to attain
a minimum 28 days cylinder strength of 20 MPa.
Note : Rates of all items should be inclusive of all supply and carriage. Page: 858 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.17.01.01.01 300mm internal dia, wall thickness not less than 50mm, Re-bar for m
pipe:- circumferential: 10 turns - 6mmΦ and longitudinal: 8 nos. -
6mmΦ , Re-bar for Collar:- circumferential: 3 turns - 6mmΦ and
longitudinal: 8 nos. - 6mmΦ
Portland Composite Cement (CEM-II/A-L/M/V/W 42.5N) 0.4740 bag 430.00 203.82
Sand (FM - 2.5) 0.0252 m3 1500.00 37.80
1st Class Brick Chips (10mm down graded) 0.0503 m3 3049.00 153.36
M.S. Ribbed/ Deformed Bar (Grade 300) 5.1304 kg 54.00 277.04
Mason 0.0678 day 550.00 37.29
Operator 0.0250 day 570.00 14.25
Re-bar Fabricator 0.0250 day 570.00 14.25
Helper of Plumber/ Electric Mistry/ Painter/ Carpenter/ 0.1000 day 470.00 47.00
Operator
Skilled Labour 0.1285 day 450.00 57.83
Ordinary Labour 0.3412 day 370.00 126.24
H.C. of Concrete Mixture Machine (Capacity 0.40/ 0.28 cum) 0.0250 day 1200.00 30.00
Diesel 0.0363 liter 68.00 2.47
Lubricant 0.0073 liter 220.00 1.61
Subtotal-A: 1002.96
H.C. of Pipe manufacturing plant, Steel Formwork ( +20.00 % on Subtotal-A ) 200.59
Earth oil, Power consumption & other
Consumables etc.
Subtotal-A1: 1203.55
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 1227.62
Note : Rates of all items should be inclusive of all supply and carriage. Page: 859 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.17.01.01.02 400mm internal dia, wall thickness not less than 75mm, Re-bar for m
pipe:- circumferential: 14 turns - 6mmΦ and longitudinal: 8 nos. -
6mmΦ , Re-bar for Collar:- circumferential: 3 turns - 6mmΦ and
longitudinal: 8 nos. - 6mmΦ
Portland Composite Cement (CEM-II/A-L/M/V/W 42.5N) 0.9680 bag 430.00 416.24
Sand (FM - 2.5) 0.0514 m3 1500.00 77.10
1st Class Brick Chips (20mm down graded) 0.1028 m3 2940.00 302.23
M.S. Ribbed/ Deformed Bar (Grade 300) 7.4198 kg 54.00 400.67
Mason 0.0856 day 550.00 47.08
Operator 0.0286 day 570.00 16.30
Re-bar Fabricator 0.0286 day 570.00 16.30
Helper of Plumber/ Electric Mistry/ Painter/ Carpenter/ 0.1072 day 470.00 50.38
Operator
Skilled Labour 0.1543 day 450.00 69.44
Ordinary Labour 0.7028 day 370.00 260.04
H.C. of Concrete Mixture Machine (Capacity 0.40/ 0.28 cum) 0.0286 day 1200.00 34.32
Diesel 0.0363 liter 68.00 2.47
Lubricant 0.0073 liter 220.00 1.61
Subtotal-A: 1694.17
H.C. of Pipe manufacturing plant, Steel Formwork ( +20.00 % on Subtotal-A ) 338.83
Earth oil, Power consumption & other
Consumables etc.
Subtotal-A1: 2033.01
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 2073.67
Note : Rates of all items should be inclusive of all supply and carriage. Page: 860 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.17.01.01.03 500mm internal dia, wall thickness not less than 75mm, Re-bar for m
pipe:- circumferential: 16 turns - 6mmΦ and longitudinal: 8 nos. -
6mmΦ , Re-bar for Collar:- circumferential: 3 turns - 6mmΦ and
longitudinal: 8 nos. - 6mmΦ
Portland Composite Cement (CEM-II/A-L/M/V/W 42.5N) 1.1850 bag 430.00 509.55
Sand (FM - 2.5) 0.0629 m3 1500.00 94.35
1st Class Brick Chips (20mm down graded) 0.1258 m3 2940.00 369.85
M.S. Ribbed/ Deformed Bar (Grade 300) 9.3332 kg 54.00 503.99
Mason 0.0856 day 550.00 47.08
Operator 0.0286 day 570.00 16.30
Re-bar Fabricator 0.0286 day 570.00 16.30
Helper of Plumber/ Electric Mistry/ Painter/ Carpenter/ 0.1072 day 470.00 50.38
Operator
Skilled Labour 0.1543 day 450.00 69.44
Ordinary Labour 0.7028 day 370.00 260.04
H.C. of Concrete Mixture Machine (Capacity 0.40/ 0.28 cum) 0.0286 day 1200.00 34.32
Diesel 0.0444 liter 68.00 3.02
Lubricant 0.0089 liter 220.00 1.96
Subtotal-A: 1976.58
H.C. of Pipe manufacturing plant, Steel Formwork ( +20.00 % on Subtotal-A ) 395.32
Earth oil, Power consumption & other
Consumables etc.
Subtotal-A1: 2371.90
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 2419.34
Note : Rates of all items should be inclusive of all supply and carriage. Page: 861 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.17.01.01.04 600mm internal dia, wall thickness not less than 85mm, Re-bar for m
pipe:- circumferential: 10 turns - 6mmΦ for inner cage & 8 turns -
6mmΦ for outer cage and longitudinal: 6 nos. - 6mmΦ for inner cage &
6 nos. - 6mmΦ for outer cage , Re-bar for Collar:- circumferential: 3
turns - 6mmΦ and longitudinal: 8 nos. - 6mmΦ
Portland Composite Cement (CEM-II/A-L/M/V/W 42.5N) 1.5738 bag 430.00 676.73
Sand (FM - 2.5) 0.0835 m3 1500.00 125.25
1st Class Brick Chips (20mm down graded) 0.1671 m3 2940.00 491.27
M.S. Ribbed/ Deformed Bar (Grade 300) 13.1686 kg 54.00 711.10
Mason 0.0856 day 550.00 47.08
Operator 0.0286 day 570.00 16.30
Re-bar Fabricator 0.0286 day 570.00 16.30
Helper of Plumber/ Electric Mistry/ Painter/ Carpenter/ 0.1072 day 470.00 50.38
Operator
Skilled Labour 0.1543 day 450.00 69.44
Ordinary Labour 0.7028 day 370.00 260.04
H.C. of Concrete Mixture Machine (Capacity 0.40/ 0.28 cum) 0.0286 day 1200.00 34.32
Diesel 0.0577 liter 68.00 3.92
Lubricant 0.0115 liter 220.00 2.53
Subtotal-A: 2504.68
H.C. of Pipe manufacturing plant and cost of Steel ( +20.00 % on Subtotal-A ) 500.94
Formwork, Earth oil, Power consumption & other
Consumables etc.
Subtotal-A1: 3005.61
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 3065.72
Note : Rates of all items should be inclusive of all supply and carriage. Page: 862 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Note : Rates of all items should be inclusive of all supply and carriage. Page: 863 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.17.01.01.05 700mm internal dia, wall thickness not less than 85mm, Re-bar for m
pipe:- circumferential: 13 turns - 6mmΦ for inner cage & 10 turns -
6mmΦ for outer cage and longitudinal: 6 nos. - 6mmΦ for inner cage &
6 nos. - 6mmΦ for outer cage , Re-bar for Collar:- circumferential: 3
turns - 6mmΦ and longitudinal: 8 nos. - 6mmΦ
Portland Composite Cement (CEM-II/A-L/M/V/W 42.5N) 1.8230 bag 430.00 783.89
Sand (FM - 2.5) 0.0968 m3 1500.00 145.20
1st Class Brick Chips (20mm down graded) 0.1936 m3 2940.00 569.18
M.S. Ribbed/ Deformed Bar (Grade 300) 17.3356 kg 54.00 936.12
Mason 0.0856 day 550.00 47.08
Operator 0.0368 day 570.00 20.98
Re-bar Fabricator 0.0368 day 570.00 20.98
Helper of Plumber/ Electric Mistry/ Painter/ Carpenter/ 0.1472 day 470.00 69.18
Operator
Skilled Labour 0.1543 day 450.00 69.44
Ordinary Labour 0.7028 day 370.00 260.04
H.C. of Concrete Mixture Machine (Capacity 0.40/ 0.28 cum) 0.0368 day 1200.00 44.16
Diesel 0.0837 liter 68.00 5.69
Lubricant 0.0167 liter 220.00 3.67
Subtotal-A: 2975.61
H.C. of Pipe manufacturing plant and cost of Steel ( +20.00 % on Subtotal-A ) 595.12
Formwork, Earth oil, Power consumption & other
Consumables etc.
Subtotal-A1: 3570.73
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 3642.15
Note : Rates of all items should be inclusive of all supply and carriage. Page: 864 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Note : Rates of all items should be inclusive of all supply and carriage. Page: 865 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.17.01.01.06 800mm internal dia, wall thickness not less than 95mm, Re-bar for m
pipe:- circumferential: 15 turns - 6mmΦ for inner cage & 11 turns -
6mmΦ for outer cage and longitudinal: 7 nos. - 6mmΦ for inner cage &
7 nos. - 6mmΦ for outer cage , Re-bar for Collar:- circumferential: 3
turns - 6mmΦ and longitudinal: 8 nos. - 6mmΦ
Portland Composite Cement (CEM-II/A-L/M/V/W 42.5N) 2.3194 bag 430.00 997.34
Sand (FM - 2.5) 0.1231 m3 1500.00 184.65
1st Class Brick Chips (20mm down graded) 0.2463 m3 2940.00 724.12
M.S. Ribbed/ Deformed Bar (Grade 300) 21.6004 kg 54.00 1166.42
Mason 0.1000 day 550.00 55.00
Operator 0.0470 day 570.00 26.79
Re-bar Fabricator 0.0470 day 570.00 26.79
Helper of Plumber/ Electric Mistry/ Painter/ Carpenter/ 0.1879 day 470.00 88.31
Operator
Skilled Labour 0.1800 day 450.00 81.00
Ordinary Labour 0.8200 day 370.00 303.40
H.C. of Concrete Mixture Machine (Capacity 0.40/ 0.28 cum) 0.0470 day 1200.00 56.40
Diesel 0.1069 liter 68.00 7.27
Lubricant 0.0214 liter 220.00 4.71
Subtotal-A: 3722.21
H.C. of Pipe manufacturing plant and cost of Steel ( +20.00 % on Subtotal-A ) 744.44
Formwork, Earth oil, Power consumption & other
Consumables etc.
Subtotal-A1: 4466.65
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 4555.98
Note : Rates of all items should be inclusive of all supply and carriage. Page: 866 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Note : Rates of all items should be inclusive of all supply and carriage. Page: 867 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.17.01.01.07 900mm internal dia, wall thickness not less than 100mm, Re-bar for m
pipe:- circumferential: 18 turns - 6mmΦ for inner cage & 14 turns -
6mmΦ for outer cage and longitudinal: 7 nos. - 6mmΦ for inner cage &
7 nos. - 6mmΦ for outer cage , Re-bar for Collar:- circumferential: 3
turns - 6mmΦ and longitudinal: 12 nos. - 6mmΦ
Portland Composite Cement (CEM-II/A-L/M/V/W 42.5N) 2.7387 bag 430.00 1177.64
Sand (FM - 2.5) 0.1454 m3 1500.00 218.10
1st Class Brick Chips (20mm down graded) 0.2908 m3 2940.00 854.95
M.S. Ribbed/ Deformed Bar (Grade 300) 28.0370 kg 54.00 1514.00
Mason 0.1142 day 550.00 62.81
Operator 0.0572 day 570.00 32.60
Re-bar Fabricator 0.0572 day 570.00 32.60
Helper of Plumber/ Electric Mistry/ Painter/ Carpenter/ 0.2286 day 470.00 107.44
Operator
Skilled Labour 0.2056 day 450.00 92.52
Ordinary Labour 0.9371 day 370.00 346.73
H.C. of Concrete Mixture Machine (Capacity 0.40/ 0.28 cum) 0.0572 day 1200.00 68.64
Diesel 0.1300 liter 68.00 8.84
Lubricant 0.0260 liter 220.00 5.72
Subtotal-A: 4522.60
H.C. of Pipe manufacturing plant and cost of Steel ( +20.00 % on Subtotal-A ) 904.52
Formwork, Earth oil, Power consumption & other
Consumables etc.
Subtotal-A1: 5427.12
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 5535.66
Note : Rates of all items should be inclusive of all supply and carriage. Page: 868 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.17.01.02 For Heavy Traffic: Cross drains/ culverts/ outlet and any other works
carrying heavy traffic in leanest mix 1:1.25:2.5 with cement conforming
to BDS EN 197-1 : 2003 BDS EN 197-1 : 2003 CEM-I 52.5N / ASTM
C150 Type-1, 20mm down well graded stone chips broken from boulder
(LAA not exceeding 30), sand of minimum FM 2.5 and water reducing
admixture conforming to ASTM C 494 Type -A @ 1.75 liter per cubic
meter of concrete to attain a minimum 28 days cylinder strength of 30
MPa.
Note : Rates of all items should be inclusive of all supply and carriage. Page: 869 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.17.01.02.01 300mm internal dia, wall thickness not less than 50mm, Re-bar for m
pipe:- circumferential: 14 turns - 6mmΦ and longitudinal: 8 nos. -
6mmΦ , Re-bar for Collar:- circumferential: 3 turns - 6mmΦ and
longitudinal: 8 nos. - 6mmΦ
Ordinary Portland Cement (CEM I, 52.5N) 0.5488 bag 455.00 249.70
Sand (FM - 2.5) 0.0243 m3 1500.00 36.45
Stone Chips (12mm down graded) [LAA≤30] 0.0486 m3 4470.00 217.24
M.S. Ribbed/ Deformed Bar (Grade 300) 6.0285 kg 54.00 325.54
Water reducing chemical admixture : Type-A 0.1207 liter 130.00 15.69
Mason 0.0678 day 550.00 37.29
Operator 0.0250 day 570.00 14.25
Re-bar Fabricator 0.0250 day 570.00 14.25
Helper of Plumber/ Electric Mistry/ Painter/ Carpenter/ 0.1000 day 470.00 47.00
Operator
Skilled Labour 0.1285 day 450.00 57.83
Ordinary Labour 0.3412 day 370.00 126.24
H.C. of Concrete Mixture Machine (Capacity 0.40/ 0.28 cum) 0.0250 day 1200.00 30.00
Diesel 0.0363 liter 68.00 2.47
Lubricant 0.0073 liter 220.00 1.61
Subtotal-A: 1175.56
H.C. of Pipe manufacturing plant, Steel Formwork ( +20.00 % on Subtotal-A ) 235.11
Earth oil, Power consumption & other
Consumables etc.
Subtotal-A1: 1410.67
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 1438.88
Note : Rates of all items should be inclusive of all supply and carriage. Page: 870 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Total: 1758.64
Note : Rates of all items should be inclusive of all supply and carriage. Page: 871 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.17.01.02.02 400mm internal dia, wall thickness not less than 75mm, Re-bar for m
pipe:- circumferential: 14 turns - 6mmΦ and longitudinal: 8 nos. -
6mmΦ , Re-bar for Collar:- circumferential: 3 turns - 6mmΦ and
longitudinal: 8 nos. - 6mmΦ
Ordinary Portland Cement (CEM I, 52.5N) 1.1209 bag 455.00 510.01
Sand (FM - 2.5) 0.0496 m3 1500.00 74.40
Stone Chips (12mm down graded) [LAA≤30] 0.0992 m3 4470.00 443.42
M.S. Ribbed/ Deformed Bar (Grade 300) 7.4198 kg 54.00 400.67
Water reducing chemical admixture : Type-A 0.2466 liter 130.00 32.06
Mason 0.0856 day 550.00 47.08
Operator 0.0286 day 570.00 16.30
Re-bar Fabricator 0.0286 day 570.00 16.30
Helper of Plumber/ Electric Mistry/ Painter/ Carpenter/ 0.1072 day 470.00 50.38
Operator
Skilled Labour 0.1543 day 450.00 69.44
Ordinary Labour 0.7028 day 370.00 260.04
H.C. of Concrete Mixture Machine (Capacity 0.40/ 0.28 cum) 0.0286 day 1200.00 34.32
Diesel 0.0363 liter 68.00 2.47
Lubricant 0.0073 liter 220.00 1.61
Subtotal-A: 1958.49
H.C. of Pipe manufacturing plant, Steel Formwork ( +20.00 % on Subtotal-A ) 391.70
Earth oil, Power consumption & other
Consumables etc.
Subtotal-A1: 2350.19
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 2397.20
Note : Rates of all items should be inclusive of all supply and carriage. Page: 872 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Total: 2929.91
Note : Rates of all items should be inclusive of all supply and carriage. Page: 873 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.17.01.02.03 500mm internal dia, wall thickness not less than 75mm, Re-bar for m
pipe:- circumferential: 19 turns - 6mmΦ and longitudinal: 8 nos. -
6mmΦ , Re-bar for Collar:- circumferential: 3 turns - 6mmΦ and
longitudinal: 8 nos. - 6mmΦ
Ordinary Portland Cement (CEM I, 52.5N) 1.3721 bag 455.00 624.31
Sand (FM - 2.5) 0.0607 m3 1500.00 91.05
Stone Chips (12mm down graded) [LAA≤30] 0.1214 m3 4470.00 542.66
M.S. Ribbed/ Deformed Bar (Grade 300) 10.4251 kg 54.00 562.96
Water reducing chemical admixture : Type-A 0.3019 liter 130.00 39.25
Mason 0.0856 day 550.00 47.08
Operator 0.0286 day 570.00 16.30
Re-bar Fabricator 0.0286 day 570.00 16.30
Helper of Plumber/ Electric Mistry/ Painter/ Carpenter/ 0.1072 day 470.00 50.38
Operator
Skilled Labour 0.1543 day 450.00 69.44
Ordinary Labour 0.7028 day 370.00 260.04
H.C. of Concrete Mixture Machine (Capacity 0.40/ 0.28 cum) 0.0286 day 1200.00 34.32
Diesel 0.0444 liter 68.00 3.02
Lubricant 0.0089 liter 220.00 1.96
Subtotal-A: 2359.05
H.C. of Pipe manufacturing plant, Steel Formwork ( +20.00 % on Subtotal-A ) 471.81
Earth oil, Power consumption & other
Consumables etc.
Subtotal-A1: 2830.86
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 2887.48
Note : Rates of all items should be inclusive of all supply and carriage. Page: 874 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Total: 3529.14
Note : Rates of all items should be inclusive of all supply and carriage. Page: 875 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.17.01.02.04 600mm internal dia, wall thickness not less than 85mm, Re-bar for m
pipe:- circumferential: 19 turns - 6mmΦ for inner cage & 14 turns -
6mmΦ for outer cage and longitudinal: 6 nos. - 6mmΦ for inner cage &
6 nos. - 6mmΦ for outer cage , Re-bar for Collar:- circumferential: 3
turns - 6mmΦ and longitudinal: 8 nos. - 6mmΦ
Ordinary Portland Cement (CEM I, 52.5N) 1.8223 bag 455.00 829.15
Sand (FM - 2.5) 0.0806 m3 1500.00 120.90
Stone Chips (12mm down graded) [LAA≤30] 0.1612 m3 4470.00 720.56
M.S. Ribbed/ Deformed Bar (Grade 300) 20.2307 kg 54.00 1092.46
Water reducing chemical admixture : Type-A 0.4009 liter 130.00 52.12
Mason 0.0856 day 550.00 47.08
Operator 0.0286 day 570.00 16.30
Re-bar Fabricator 0.0286 day 570.00 16.30
Helper of Plumber/ Electric Mistry/ Painter/ Carpenter/ 0.1072 day 470.00 50.38
Operator
Skilled Labour 0.1543 day 450.00 69.44
Ordinary Labour 0.7028 day 370.00 260.04
H.C. of Concrete Mixture Machine (Capacity 0.40/ 0.28 cum) 0.0286 day 1200.00 34.32
Diesel 0.0577 liter 68.00 3.92
Lubricant 0.0115 liter 220.00 2.53
Subtotal-A: 3315.50
H.C. of Pipe manufacturing plant, Steel Formwork ( +20.00 % on Subtotal-A ) 663.10
Earth oil, Power consumption & other
Consumables etc.
Subtotal-A1: 3978.60
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 4058.17
Note : Rates of all items should be inclusive of all supply and carriage. Page: 876 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Total: 4959.98
Note : Rates of all items should be inclusive of all supply and carriage. Page: 877 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.17.01.02.05 700mm internal dia, wall thickness not less than 85mm, Re-bar for m
pipe:- circumferential: 19 turns - 6mmΦ for inner cage & 14 turns -
6mmΦ for outer cage and longitudinal: 8 nos. - 6mmΦ for inner cage &
8 nos. - 6mmΦ for outer cage , Re-bar for Collar:- circumferential: 3
turns - 6mmΦ and longitudinal: 8 nos. - 6mmΦ
Ordinary Portland Cement (CEM I, 52.5N) 2.1109 bag 455.00 960.46
Sand (FM - 2.5) 0.0934 m3 1500.00 140.10
Stone Chips (12mm down graded) [LAA≤30] 0.1868 m3 4470.00 835.00
M.S. Ribbed/ Deformed Bar (Grade 300) 23.6199 kg 54.00 1275.47
Water reducing chemical admixture : Type-A 0.4644 liter 130.00 60.37
Mason 0.0856 day 550.00 47.08
Operator 0.0368 day 570.00 20.98
Re-bar Fabricator 0.0368 day 570.00 20.98
Helper of Plumber/ Electric Mistry/ Painter/ Carpenter/ 0.1472 day 470.00 69.18
Operator
Skilled Labour 0.1543 day 450.00 69.44
Ordinary Labour 0.7028 day 370.00 260.04
H.C. of Concrete Mixture Machine (Capacity 0.40/ 0.28 cum) 0.0368 day 1200.00 44.16
Diesel 0.0837 liter 68.00 5.69
Lubricant 0.0167 liter 220.00 3.67
Subtotal-A: 3812.61
H.C. of Pipe manufacturing plant and cost of Steel ( +20.00 % on Subtotal-A ) 762.52
Formwork, Earth oil, Power consumption & other
Consumables etc.
Subtotal-A1: 4575.14
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 4666.64
Note : Rates of all items should be inclusive of all supply and carriage. Page: 878 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Total: 5703.67
Note : Rates of all items should be inclusive of all supply and carriage. Page: 879 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.17.01.02.06 800mm internal dia, wall thickness not less than 95mm, Re-bar for m
pipe:- circumferential: 22 turns - 6mmΦ for inner cage & 17 turns -
6mmΦ for outer cage and longitudinal: 8 nos. - 6mmΦ for inner cage &
8 nos. - 6mmΦ for outer cage , Re-bar for Collar:- circumferential: 3
turns - 6mmΦ and longitudinal: 8 nos. - 6mmΦ
Ordinary Portland Cement (CEM I, 52.5N) 2.6856 bag 455.00 1221.95
Sand (FM - 2.5) 0.1188 m3 1500.00 178.20
Stone Chips (12mm down graded) [LAA≤30] 0.2376 m3 4470.00 1062.07
M.S. Ribbed/ Deformed Bar (Grade 300) 30.1117 kg 54.00 1626.03
Water reducing chemical admixture : Type-A 0.5908 liter 130.00 76.80
Mason 0.1000 day 550.00 55.00
Operator 0.0470 day 570.00 26.79
Re-bar Fabricator 0.0470 day 570.00 26.79
Helper of Plumber/ Electric Mistry/ Painter/ Carpenter/ 0.1879 day 470.00 88.31
Operator
Skilled Labour 0.1800 day 450.00 81.00
Ordinary Labour 0.8200 day 370.00 303.40
H.C. of Concrete Mixture Machine (Capacity 0.40/ 0.28 cum) 0.0470 day 1200.00 56.40
Diesel 0.1069 liter 68.00 7.27
Lubricant 0.0214 liter 220.00 4.71
Subtotal-A: 4814.73
H.C. of Pipe manufacturing plant and cost of Steel ( +20.00 % on Subtotal-A ) 962.95
Formwork, Earth oil, Power consumption & other
Consumables etc.
Subtotal-A1: 5777.67
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 5893.22
Note : Rates of all items should be inclusive of all supply and carriage. Page: 880 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Total: 7202.83
Note : Rates of all items should be inclusive of all supply and carriage. Page: 881 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.17.01.02.07 900mm internal dia, wall thickness not less than 100mm, Re-bar for m
pipe:- circumferential: 14 turns - 8mmΦ for inner cage & 11 turns -
8mmΦ for outer cage and longitudinal: 8 nos. - 6mmΦ for inner cage &
8 nos. - 6mmΦ for outer cage , Re-bar for Collar:- circumferential: 3
turns - 6mmΦ and longitudinal: 12 nos. - 6mmΦ
Ordinary Portland Cement (CEM I, 52.5N) 3.1711 bag 455.00 1442.85
Sand (FM - 2.5) 0.1403 m3 1500.00 210.45
Stone Chips (12mm down graded) [LAA≤30] 0.2806 m3 4470.00 1254.28
M.S. Ribbed/ Deformed Bar (Grade 300) 37.1018 kg 54.00 2003.50
Water reducing chemical admixture : Type-A 0.6976 liter 130.00 90.69
Mason 0.1142 day 550.00 62.81
Operator 0.0572 day 570.00 32.60
Re-bar Fabricator 0.0572 day 570.00 32.60
Helper of Plumber/ Electric Mistry/ Painter/ Carpenter/ 0.2286 day 470.00 107.44
Operator
Skilled Labour 0.2056 day 450.00 92.52
Ordinary Labour 0.9371 day 370.00 346.73
H.C. of Concrete Mixture Machine (Capacity 0.40/ 0.28 cum) 0.0572 day 1200.00 68.64
Diesel 0.1300 liter 68.00 8.84
Lubricant 0.0260 liter 220.00 5.72
Subtotal-A: 5759.67
H.C. of Pipe manufacturing plant and cost of Steel ( +20.00 % on Subtotal-A ) 1151.93
Formwork, Earth oil, Power consumption & other
Consumables etc.
Subtotal-A1: 6911.61
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 7049.84
Note : Rates of all items should be inclusive of all supply and carriage. Page: 882 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Total: 8616.47
Note : Rates of all items should be inclusive of all supply and carriage. Page: 883 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.17.01.02.08 1000mm internal dia, wall thickness not less than 115mm, Re-bar for m
pipe:- circumferential: 17 turns - 8mmΦ for inner cage & 13 turns -
8mmΦ for outer cage and longitudinal: 8 nos. - 8mmΦ for inner cage &
8 nos. - 8mmΦ for outer cage , Re-bar for Collar:- circumferential: 3
turns - 8mmΦ and longitudinal: 12 nos. - 6mmΦ
Ordinary Portland Cement (CEM I, 52.5N) 4.0411 bag 455.00 1838.70
Sand (FM - 2.5) 0.1788 m3 1500.00 268.20
Stone Chips (12mm down graded) [LAA≤30] 0.3575 m3 4470.00 1598.03
M.S. Ribbed/ Deformed Bar (Grade 300) 52.5381 kg 54.00 2837.06
Water reducing chemical admixture : Type-A 0.8890 liter 130.00 115.57
Mason 0.1142 day 550.00 62.81
Operator 0.0572 day 570.00 32.60
Re-bar Fabricator 0.0572 day 570.00 32.60
Helper of Plumber/ Electric Mistry/ Painter/ Carpenter/ 0.2286 day 470.00 107.44
Operator
Skilled Labour 0.2056 day 450.00 92.52
Ordinary Labour 0.9371 day 370.00 346.73
H.C. of Concrete Mixture Machine (Capacity 0.40/ 0.28 cum) 0.0572 day 1200.00 68.64
Diesel 0.1500 liter 68.00 10.20
Lubricant 0.0300 liter 220.00 6.60
Subtotal-A: 7417.70
H.C. of Pipe manufacturing plant and cost of Steel ( +20.00 % on Subtotal-A ) 1483.54
Formwork, Earth oil, Power consumption & other
Consumables etc.
Subtotal-A1: 8901.24
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 9079.26
Note : Rates of all items should be inclusive of all supply and carriage. Page: 884 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Total: 11096.88
Note : Rates of all items should be inclusive of all supply and carriage. Page: 885 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.17.01.02.09 1100mm internal dia, wall thickness not less than 115mm, Re-bar for m
pipe:- circumferential: 19 turns - 8mmΦ for inner cage & 14 turns -
8mmΦ for outer cage and longitudinal: 8 nos. - 8mmΦ for inner cage &
8 nos. - 8mmΦ for outer cage , Re-bar for Collar:- circumferential: 3
turns - 8mmΦ and longitudinal: 12 nos. - 6mmΦ
Ordinary Portland Cement (CEM I, 52.5N) 4.4390 bag 455.00 2019.75
Sand (FM - 2.5) 0.1964 m3 1500.00 294.60
Stone Chips (12mm down graded) [LAA≤30] 0.3928 m3 4470.00 1755.82
M.S. Ribbed/ Deformed Bar (Grade 300) 61.0518 kg 54.00 3296.80
Water reducing chemical admixture : Type-A 0.9766 liter 130.00 126.96
Mason 0.1142 day 550.00 62.81
Operator 0.0715 day 570.00 40.76
Re-bar Fabricator 0.0715 day 570.00 40.76
Helper of Plumber/ Electric Mistry/ Painter/ Carpenter/ 0.2286 day 470.00 107.44
Operator
Skilled Labour 0.2056 day 450.00 92.52
Ordinary Labour 0.9371 day 370.00 346.73
H.C. of Concrete Mixture Machine (Capacity 0.40/ 0.28 cum) 0.0715 day 1200.00 85.80
Diesel 0.1650 liter 68.00 11.22
Lubricant 0.0330 liter 220.00 7.26
Subtotal-A: 8289.21
H.C. of Pipe manufacturing plant and cost of Steel ( +20.00 % on Subtotal-A ) 1657.84
Formwork, Earth oil, Power consumption & other
Consumables etc.
Subtotal-A1: 9947.05
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 10145.99
Note : Rates of all items should be inclusive of all supply and carriage. Page: 886 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Total: 12400.65
Note : Rates of all items should be inclusive of all supply and carriage. Page: 887 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.17.01.02.10 1200mm internal dia, wall thickness not less than 120mm, Re-bar for m
pipe:- circumferential: 21 turns - 8mmΦ for inner cage & 16 turns -
8mmΦ for outer cage and longitudinal: 8 nos. - 8mmΦ for inner cage &
8 nos. - 8mmΦ for outer cage , Re-bar for Collar:- circumferential: 3
turns - 8mmΦ and longitudinal: 12 nos. - 8mmΦ
Ordinary Portland Cement (CEM I, 52.5N) 5.0933 bag 455.00 2317.45
Sand (FM - 2.5) 0.2253 m3 1500.00 337.95
Stone Chips (12mm down graded) [LAA≤30] 0.4506 m3 4470.00 2014.18
M.S. Ribbed/ Deformed Bar (Grade 300) 72.5811 kg 54.00 3919.38
Water reducing chemical admixture : Type-A 1.1205 liter 130.00 145.67
Mason 0.1142 day 550.00 62.81
Operator 0.0858 day 570.00 48.91
Re-bar Fabricator 0.0858 day 570.00 48.91
Helper of Plumber/ Electric Mistry/ Painter/ Carpenter/ 0.2286 day 470.00 107.44
Operator
Skilled Labour 0.2056 day 450.00 92.52
Ordinary Labour 0.9371 day 370.00 346.73
H.C. of Concrete Mixture Machine (Capacity 0.40/ 0.28 cum) 0.0858 day 1200.00 102.96
Diesel 0.1793 liter 68.00 12.19
Lubricant 0.0360 liter 220.00 7.92
Subtotal-A: 9565.01
H.C. of Pipe manufacturing plant and cost of Steel ( +20.00 % on Subtotal-A ) 1913.00
Formwork, Earth oil, Power consumption & other
Consumables etc.
Subtotal-A1: 11478.01
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 11707.57
Note : Rates of all items should be inclusive of all supply and carriage. Page: 888 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Total: 14309.26
Note : Rates of all items should be inclusive of all supply and carriage. Page: 889 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.17.01.02.11 1400mm internal dia, wall thickness not less than 135mm, Re-bar for m
pipe:- circumferential: 17 turns - 10mmΦ for inner cage & 13 turns -
10mmΦ for outer cage and longitudinal: 12 nos. - 8mmΦ for inner
cage & 12 nos. - 8mmΦ for outer cage , Re-bar for Collar:-
circumferential: 3 turns - 8mmΦ for inner cage & 3 turns - 8mmΦ for
outer cage and longitudinal: 8 nos. - 8mmΦ for inner cage & 8 nos. -
8mmΦ for outer cage
Ordinary Portland Cement (CEM I, 52.5N) 6.6109 bag 455.00 3007.96
Sand (FM - 2.5) 0.2925 m3 1500.00 438.75
Stone Chips (12mm down graded) [LAA≤30] 0.5849 m3 4470.00 2614.50
M.S. Ribbed/ Deformed Bar (Grade 300) 112.0797 kg 54.00 6052.30
Water reducing chemical admixture : Type-A 1.4544 liter 130.00 189.07
Mason 0.1142 day 550.00 62.81
Operator 0.0858 day 570.00 48.91
Re-bar Fabricator 0.0858 day 570.00 48.91
Helper of Plumber/ Electric Mistry/ Painter/ Carpenter/ 0.2286 day 470.00 107.44
Operator
Skilled Labour 0.2056 day 450.00 92.52
Ordinary Labour 0.9371 day 370.00 346.73
H.C. of Concrete Mixture Machine (Capacity 0.40/ 0.28 cum) 0.0858 day 1200.00 102.96
Diesel 0.2324 liter 68.00 15.80
Lubricant 0.0464 liter 220.00 10.21
Subtotal-A: 13138.87
H.C. of Pipe manufacturing plant and cost of Steel ( +20.00 % on Subtotal-A ) 2627.77
Formwork, Earth oil, Power consumption & other
Consumables etc.
Subtotal-A1: 15766.64
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 16081.98
Note : Rates of all items should be inclusive of all supply and carriage. Page: 890 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Note : Rates of all items should be inclusive of all supply and carriage. Page: 891 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.17.01.02.12 1600mm internal dia, wall thickness not less than 140mm, Re-bar for m
pipe:- circumferential: 21 turns - 10mmΦ for inner cage & 16 turns -
10mmΦ for outer cage and longitudinal: 12 nos. - 8mmΦ for inner
cage & 12 nos. - 8mmΦ for outer cage , Re-bar for Collar:-
circumferential: 3 turns - 8mmΦ for inner cage & 3 turns - 8mmΦ for
outer cage and longitudinal: 8 nos. - 8mmΦ for inner cage & 8 nos. -
8mmΦ for outer cage
Ordinary Portland Cement (CEM I, 52.5N) 7.8418 bag 455.00 3568.02
Sand (FM - 2.5) 0.3469 m3 1500.00 520.35
Stone Chips (12mm down graded) [LAA≤30] 0.6938 m3 4470.00 3101.29
M.S. Ribbed/ Deformed Bar (Grade 300) 148.9871 kg 54.00 8045.30
Water reducing chemical admixture : Type-A 1.7252 liter 130.00 224.28
Mason 0.1142 day 550.00 62.81
Operator 0.0858 day 570.00 48.91
Re-bar Fabricator 0.0858 day 570.00 48.91
Helper of Plumber/ Electric Mistry/ Painter/ Carpenter/ 0.2286 day 470.00 107.44
Operator
Skilled Labour 0.2056 day 450.00 92.52
Ordinary Labour 0.9371 day 370.00 346.73
H.C. of Concrete Mixture Machine (Capacity 0.40/ 0.28 cum) 0.0858 day 1200.00 102.96
Diesel 0.2324 liter 68.00 15.80
Lubricant 0.0464 liter 220.00 10.21
Subtotal-A: 16295.52
H.C. of Pipe manufacturing plant and cost of Steel ( +20.00 % on Subtotal-A ) 3259.10
Formwork, Earth oil, Power consumption & other
Consumables etc.
Subtotal-A1: 19554.62
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 19945.71
Note : Rates of all items should be inclusive of all supply and carriage. Page: 892 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Note : Rates of all items should be inclusive of all supply and carriage. Page: 893 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.17.01.02.13 1800mm internal dia, wall thickness not less than 150mm, Re-bar for m
pipe:- circumferential: 22 turns - 10mmΦ for inner cage & 22 turns -
10mmΦ for outer cage and longitudinal: 14 nos. - 10mmΦ for inner
cage & 14 nos. - 10mmΦ for outer cage , Re-bar for Collar:-
circumferential: 3 turns - 8mmΦ for inner cage & 3 turns - 8mmΦ for
outer cage and longitudinal: 12 nos. - 8mmΦ for inner cage & 12 nos. -
8mmΦ for outer cage
Ordinary Portland Cement (CEM I, 52.5N) 9.4541 bag 455.00 4301.62
Sand (FM - 2.5) 0.4182 m3 1500.00 627.30
Stone Chips (12mm down graded) [LAA≤30] 0.8365 m3 4470.00 3739.16
M.S. Ribbed/ Deformed Bar (Grade 300) 201.3434 kg 54.00 10872.54
Water reducing chemical admixture : Type-A 2.0799 liter 130.00 270.39
Mason 0.1142 day 550.00 62.81
Operator 0.0858 day 570.00 48.91
Re-bar Fabricator 0.0858 day 570.00 48.91
Helper of Plumber/ Electric Mistry/ Painter/ Carpenter/ 0.2286 day 470.00 107.44
Operator
Skilled Labour 0.2056 day 450.00 92.52
Ordinary Labour 0.9371 day 370.00 346.73
H.C. of Concrete Mixture Machine (Capacity 0.40/ 0.28 cum) 0.0858 day 1200.00 102.96
Diesel 0.2324 liter 68.00 15.80
Lubricant 0.0464 liter 220.00 10.21
Subtotal-A: 20647.28
H.C. of Pipe manufacturing plant and cost of Steel ( +20.00 % on Subtotal-A ) 4129.46
Formwork, Earth oil, Power consumption & other
Consumables etc.
Subtotal-A1: 24776.74
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 25272.27
Note : Rates of all items should be inclusive of all supply and carriage. Page: 894 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Note : Rates of all items should be inclusive of all supply and carriage. Page: 895 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.17.01.02.14 2000mm internal dia, wall thickness not less than 170mm, Re-bar for m
pipe:- circumferential: 22 turns - 10mmΦ for inner cage & 22 turns -
10mmΦ for outer cage and longitudinal: 14 nos. - 10mmΦ for inner
cage & 14 nos. - 10mmΦ for outer cage , Re-bar for Collar:-
circumferential: 3 turns - 8mmΦ for inner cage & 3 turns - 8mmΦ for
outer cage and longitudinal: 12 nos. - 8mmΦ for inner cage & 12 nos. -
8mmΦ for outer cage
Ordinary Portland Cement (CEM I, 52.5N) 11.8754 bag 455.00 5403.31
Sand (FM - 2.5) 0.5254 m3 1500.00 788.10
Stone Chips (12mm down graded) [LAA≤30] 1.0507 m3 4470.00 4696.63
M.S. Ribbed/ Deformed Bar (Grade 300) 221.9522 kg 54.00 11985.42
Water reducing chemical admixture : Type-A 2.6126 liter 130.00 339.64
Mason 0.1142 day 550.00 62.81
Operator 0.0858 day 570.00 48.91
Re-bar Fabricator 0.0858 day 570.00 48.91
Helper of Plumber/ Electric Mistry/ Painter/ Carpenter/ 0.2286 day 470.00 107.44
Operator
Skilled Labour 0.2056 day 450.00 92.52
Ordinary Labour 0.9371 day 370.00 346.73
H.C. of Concrete Mixture Machine (Capacity 0.40/ 0.28 cum) 0.0858 day 1200.00 102.96
Diesel 0.2324 liter 68.00 15.80
Lubricant 0.0464 liter 220.00 10.21
Subtotal-A: 24049.38
H.C. of Pipe manufacturing plant and cost of Steel ( +20.00 % on Subtotal-A ) 4809.88
Formwork, Earth oil, Power consumption & other
Consumables etc.
Subtotal-A1: 28859.25
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 29436.44
Note : Rates of all items should be inclusive of all supply and carriage. Page: 896 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.18.01.01 Mobilization & demobilization within 100km of Dhaka/ nearby source to set
site and RHT on 10 (ten) nos. spots or less of a single structure
RHT: Mobilization, demobilization & accomodation including 1.0000 ithin 100k 10000.00 10000.00
10 nos. RHT (Rebound Hammer Test)
Foreman 1.0000 day 800.00 800.00
Ordinary Labour 1.0000 day 370.00 370.00
Subtotal-A: 11170.00
Reporting charges and consumables etc. ( +5.00 % on Subtotal-A ) 558.50
Subtotal-A1: 11728.50
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 11963.07
Note : Rates of all items should be inclusive of all supply and carriage. Page: 897 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 25.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 25.50
4.18.01.03 RHT on each additional spot after 10(ten) spots tested. each
RHT: per impact after 1st 10 RHT 1.0000 each 1000.00 1000.00
Foreman 0.1000 day 800.00 80.00
Ordinary Labour 0.1000 day 370.00 37.00
Subtotal-A: 1117.00
Reporting charges and consumables etc. ( +5.00 % on Subtotal-A ) 55.85
Subtotal-A1: 1172.85
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 1196.31
Note : Rates of all items should be inclusive of all supply and carriage. Page: 898 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.18.02.01 Mobilization & demobilization within 100km of Dhaka/ nearby source to set
site and UPV on 10 (ten) nos. spots or less of a single structure
UPV: Mobilization, demobilization & accomodation including 1.0000 ithin 100k 15000.00 15000.00
10 nos. UPV (Ultrasonic Pulse Velocity) Test
Foreman 1.0000 day 800.00 800.00
Ordinary Labour 1.0000 day 370.00 370.00
Subtotal-A: 16170.00
Reporting charges and consumables etc. ( +5.00 % on Subtotal-A ) 808.50
Subtotal-A1: 16978.50
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 17318.07
Note : Rates of all items should be inclusive of all supply and carriage. Page: 899 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 25.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 25.50
4.18.02.03 UPV on each additional spot after 10(ten) spots tested. each
UPV: per test after 1st 10 UPV 1.0000 each 1500.00 1500.00
Foreman 0.1000 day 800.00 80.00
Ordinary Labour 0.1000 day 370.00 37.00
Subtotal-A: 1617.00
Reporting charges and consumables etc. ( +5.00 % on Subtotal-A ) 80.85
Subtotal-A1: 1697.85
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 1731.81
Note : Rates of all items should be inclusive of all supply and carriage. Page: 900 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.18.03 Core Cutter: Obtaining, preparing and testing in-situ cylindrical core
specimens of specified diameter drilled from hardened concrete
including core location determination by rebar locator/ scanning and
preparing the structural members as directed to expose the concrete,
cleaning the area with blower/ wire brush and taking out the comcrete
sample with cutter and testing as per standard specification. The
procedure for drilling, examination, measurement and testing for
comprehensive strength shall be in accordance with ASTM C 42
(Standard Test Method for obtaining and testing drilled cores and sawed
beams of concrete). Before commencing Core cutting, contractor shall
submit methodology with resumes of the consulting personnel for
conducting test to the E-I-C for approval. The cost of cutting the core
with necessary laboratory test fees is included in this unit rate.
4.18.03.01 Mobilization & demobilization within 100km of Dhaka/ nearby source to set
site and in-situ core cutting on 3 (three) nos. spots or less of a single
structure
Mobilization, demobilization & accomodation including 3 nos. 1.0000 ithin 100k 16000.00 16000.00
in-situ core cutting & testing
Foreman 1.0000 day 800.00 800.00
Ordinary Labour 1.0000 day 370.00 370.00
Subtotal-A: 17170.00
Reporting charges and consumables etc. ( +5.00 % on Subtotal-A ) 858.50
Subtotal-A1: 18028.50
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 18389.07
Note : Rates of all items should be inclusive of all supply and carriage. Page: 901 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 35.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 35.70
4.18.03.03 In-situ core cutting on each additional nos. after 3(three) spots each
Core Cutter: per core after 1st 3 cores 1.0000 each 4200.00 4200.00
Foreman 0.2500 day 800.00 200.00
Ordinary Labour 0.2500 day 370.00 92.50
Subtotal-A: 4492.50
Reporting charges and consumables etc. ( +5.00 % on Subtotal-A ) 224.63
Subtotal-A1: 4717.13
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 4811.47
Note : Rates of all items should be inclusive of all supply and carriage. Page: 902 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 150.40
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 153.41
Note : Rates of all items should be inclusive of all supply and carriage. Page: 903 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 163.53
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 166.80
Note : Rates of all items should be inclusive of all supply and carriage. Page: 904 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 203.28
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 207.34
Note : Rates of all items should be inclusive of all supply and carriage. Page: 905 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 186.81
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 190.55
Note : Rates of all items should be inclusive of all supply and carriage. Page: 906 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 204.31
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 208.40
Note : Rates of all items should be inclusive of all supply and carriage. Page: 907 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 257.31
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 262.46
Note : Rates of all items should be inclusive of all supply and carriage. Page: 908 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 276.42
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 281.94
Note : Rates of all items should be inclusive of all supply and carriage. Page: 909 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 302.67
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 308.72
Note : Rates of all items should be inclusive of all supply and carriage. Page: 910 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 382.17
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 389.81
Note : Rates of all items should be inclusive of all supply and carriage. Page: 911 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 191.75
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 195.59
Note : Rates of all items should be inclusive of all supply and carriage. Page: 912 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 209.25
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 213.44
Note : Rates of all items should be inclusive of all supply and carriage. Page: 913 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 262.25
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 267.50
Note : Rates of all items should be inclusive of all supply and carriage. Page: 914 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 287.80
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 293.56
Note : Rates of all items should be inclusive of all supply and carriage. Page: 915 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 314.05
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 320.33
Note : Rates of all items should be inclusive of all supply and carriage. Page: 916 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 393.55
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 401.42
Note : Rates of all items should be inclusive of all supply and carriage. Page: 917 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 373.52
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 380.99
Note : Rates of all items should be inclusive of all supply and carriage. Page: 918 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 408.52
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 416.69
Note : Rates of all items should be inclusive of all supply and carriage. Page: 919 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 514.52
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 524.81
Note : Rates of all items should be inclusive of all supply and carriage. Page: 920 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 460.79
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 470.01
Note : Rates of all items should be inclusive of all supply and carriage. Page: 921 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 504.54
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 514.63
Note : Rates of all items should be inclusive of all supply and carriage. Page: 922 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 637.04
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 649.78
Note : Rates of all items should be inclusive of all supply and carriage. Page: 923 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 296.18
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 302.10
Note : Rates of all items should be inclusive of all supply and carriage. Page: 924 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 322.43
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 328.88
Note : Rates of all items should be inclusive of all supply and carriage. Page: 925 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 401.93
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 409.97
Note : Rates of all items should be inclusive of all supply and carriage. Page: 926 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 394.91
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 402.81
Note : Rates of all items should be inclusive of all supply and carriage. Page: 927 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 429.91
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 438.51
Note : Rates of all items should be inclusive of all supply and carriage. Page: 928 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 535.91
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 546.63
Note : Rates of all items should be inclusive of all supply and carriage. Page: 929 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 493.65
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 503.52
Note : Rates of all items should be inclusive of all supply and carriage. Page: 930 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 537.40
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 548.15
Note : Rates of all items should be inclusive of all supply and carriage. Page: 931 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 669.90
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 683.30
Note : Rates of all items should be inclusive of all supply and carriage. Page: 932 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 592.38
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 604.23
Note : Rates of all items should be inclusive of all supply and carriage. Page: 933 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 644.88
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 657.78
Note : Rates of all items should be inclusive of all supply and carriage. Page: 934 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 803.88
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 819.96
Note : Rates of all items should be inclusive of all supply and carriage. Page: 935 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 691.09
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 704.92
Note : Rates of all items should be inclusive of all supply and carriage. Page: 936 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 752.34
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 767.39
Note : Rates of all items should be inclusive of all supply and carriage. Page: 937 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 937.84
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 956.60
Note : Rates of all items should be inclusive of all supply and carriage. Page: 938 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Note : Rates of all items should be inclusive of all supply and carriage. Page: 939 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 861.50
Other consumables etc. ( +5.00 % on Subtotal-A ) 43.07
Subtotal-A1: 904.57
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 922.66
Note : Rates of all items should be inclusive of all supply and carriage. Page: 940 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 1203.88
Other consumables etc. ( +5.00 % on Subtotal-A ) 60.19
Subtotal-A1: 1264.08
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 1289.36
Note : Rates of all items should be inclusive of all supply and carriage. Page: 941 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 2053.88
Other consumables etc. ( +5.00 % on Subtotal-A ) 102.69
Subtotal-A1: 2156.58
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 2199.71
Note : Rates of all items should be inclusive of all supply and carriage. Page: 942 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 2679.44
Other consumables etc. ( +5.00 % on Subtotal-A ) 133.97
Subtotal-A1: 2813.42
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 2869.68
Note : Rates of all items should be inclusive of all supply and carriage. Page: 943 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.19.03 Prefabricated Vertical Drain (PVD)/ Wick Drain: Supply & Installation of
prefabricated virtical drains/ wick drains to reduce the preload time & to
accelerate settlement of embankments for bridge approach or roadways
including unrolling the wick drain roll, changing & splicing wick drain
roll, pushing hollow mandrel carrying into the ground carring the wick
drain inside to protect it from tear, cuts and abrasion, providing anchor
plate/ rod at the bottom of the mandrel to prevent soil from entering
the mandrel during installation, maintain the mandrel in a vertical
position, providing a minimum of 30 ton of static push force when
setting on firm ground, installing by specialized wick drain installation
equipment mounted on hydraulic excavator or crane, withdrawn the
mandrel after the installtion of the drain, cost of furnishing all tools,
materials, labour, equipment and all other costs necessary to complete
the work as per design, specification & direction of the E-I-C. Hydraulic
jetting shall not be permitted for installtion of the drains. The locations
and depth of wick drain, sequene of installation will be as directed by
the Engineer and specifications in conjuction with all drawings and logs.
All drains will go to maximum allowable/ anchorable depth or until
refusal as directed in the specification and logs.
Note: Prior to installation of PVD the Contractor shall demonstrate that
the equipment, method, and materials produce a satisfactory installation
in accordance with the specifications. For this purpose, the Contractor
will be required to install 2 trial drains at locations designated by the
Engineer. Trial drains will be paid at the contract unit price unless the
drain is improperly installed. 5% wastage is considered in this unit rate.
Note : Rates of all items should be inclusive of all supply and carriage. Page: 944 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 182.74
Anchor Plates, Staplers, Stapler Pins and other ( +5.00 % on Subtotal-A ) 9.14
consumables etc.
Subtotal-A1: 191.87
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 195.71
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.19.03.02 PVJD: Prefabricated Vertical Jute Drains (PVJD) shall consist of an outer m
sheath (jacket) made of woven jute geotextile (JGT) with 4-coir wicks
separated by stitched compartments having discharge capacity at 7
days (200 kPa at hydraulic gradient of 1.0) shall be greater than 500
m3/yr and shall meet the following specifications.
Composite Drain Properties:
Width (mm) ≥ 90 ± 10%, Thickness (mm) > 5, Grab Tensile Strength
(N), MD X CD > 350 X 350, Trapezoidal Tear Strength (N), MD X CD >
100 X 100, Puncture Resistance (N) > 100, Burst Strength (N) > 900,
Apparent Opening size (AOS, O95) (micron) ≤ 90.
Filter Fabric Properties:
Equivalent Diameter (mm) > 50.
Prefabricated Vertical Jute Drain (PVJD) - Jute sheath with 1.0500 m 110.00 115.50
coir wick
Skilled Labour 0.0030 day 450.00 1.35
Ordinary Labour 0.0182 day 370.00 6.73
Operator 0.0040 day 570.00 2.28
Helper of Plumber/ Electric Mistry/ Painter/ Carpenter/ 0.0080 day 470.00 3.76
Operator
H.C. of Excavator (Medium Size) 0.0020 day 8880.00 17.76
Diesel 0.2030 liter 68.00 13.80
Lubricant 0.0025 liter 220.00 0.55
Subtotal-A: 161.74
Anchor Plates, Staplers, Stapler Pins and other ( +5.00 % on Subtotal-A ) 8.09
consumables etc.
Subtotal-A1: 169.82
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 173.22
Note : Rates of all items should be inclusive of all supply and carriage. Page: 946 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 3726.95
Other consumables etc. ( +2.50 % on Subtotal-A ) 93.17
Subtotal-A1: 3820.12
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 3896.52
Note : Rates of all items should be inclusive of all supply and carriage. Page: 947 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 4437.19
Other consumables etc. ( +2.50 % on Subtotal-A ) 110.93
Subtotal-A1: 4548.12
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 4639.08
Note : Rates of all items should be inclusive of all supply and carriage. Page: 948 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Note : Rates of all items should be inclusive of all supply and carriage. Page: 949 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.19.05.01 MSE_FP: Providing, hoisting and placing of pre-cast RCC Facia Panels of sqm
minimum 0.80 sqm area and 180mm thickness, made with minimum 35
MPa concrete inclusive of reinforcement, shuttering, casting in yard,
curing, storing, transporting, lifting, placing in position, erection with all
necessary accessories i.e., rubber pad, universal hook, anchor block,
nut, washer, joint fillers, fasteners etc. complete in all respect as per
approved drawing, specification and direction of Engineer-in-charge.
RCC-35SCBP: Reinforced cement concrete work with 0.1800 cum 11961.63 2153.09
minimum cement content and maximum water cement ratio
as specified by the laboratory through mix design having
minimum required average compressive
str.............4.09.06.01
Supplying and fabrication of Ribbed or deformed bar 5.0000 kg 64.65 323.25
reinforcement conforming to BDS ISO 6935-2:2006 (Grade
500)………….(4.11.01.04)
Mason 0.0100 day 550.00 5.50
Skilled Labour 0.0200 day 450.00 9.00
Ordinary Labour 0.0400 day 370.00 14.80
H.C. of KATO Mobile Crane (upto 5 ton) 0.0600 day 4000.00 240.00
Subtotal-A: 2745.64
For all necessary temporary form work, scaffolding ( +30.00 % on Subtotal-A ) 823.69
and provision of loops/lugs for lifting of pannels
and joining the reinforcing elements
Subtotal-A1: 3569.34
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 3640.72
Note : Rates of all items should be inclusive of all supply and carriage. Page: 950 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 893.50
Cost of accessories for joining reinforcing elements ( +10.00 % on Subtotal-A ) 89.35
with the facia panels, overlaps, heat bonding or
extension.
Subtotal-A1: 982.85
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 1002.51
Note : Rates of all items should be inclusive of all supply and carriage. Page: 951 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 893.50
Cost of accessories for joining reinforcing elements ( +10.00 % on Subtotal-A ) 89.35
with the facia panels, overlaps, heat bonding or
extension.
Subtotal-A1: 982.85
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 1002.51
Note : Rates of all items should be inclusive of all supply and carriage. Page: 952 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 453.50
Cost of accessories for joining reinforcing elements ( +10.00 % on Subtotal-A ) 45.35
with the facia panels, overlaps, heat bonding or
extension.
Subtotal-A1: 498.85
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 508.83
Note : Rates of all items should be inclusive of all supply and carriage. Page: 953 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 453.50
Cost of accessories for joining reinforcing elements ( +10.00 % on Subtotal-A ) 45.35
with the facia panels, overlaps, heat bonding or
extension.
Subtotal-A1: 498.85
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 508.83
Note : Rates of all items should be inclusive of all supply and carriage. Page: 954 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 893.50
Cost of accessories for joining reinforcing elements ( +10.00 % on Subtotal-A ) 89.35
with the facia panels, overlaps, heat bonding or
extension.
Subtotal-A1: 982.85
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 1002.51
Note : Rates of all items should be inclusive of all supply and carriage. Page: 955 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 211.50
Cost of accessories for joining reinforcing elements ( +10.00 % on Subtotal-A ) 21.15
with the facia panels, overlaps and other
protective elements for synthetic geogrids.
Subtotal-A1: 232.65
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 237.30
Note : Rates of all items should be inclusive of all supply and carriage. Page: 956 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 147.70
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 150.65
Note : Rates of all items should be inclusive of all supply and carriage. Page: 957 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.19.05.03 MSE_BF: Backfill with selected granular material in layers in approaches cum
of work over metal strip/synthetic geogrid/steel which is to be retained
by mechanically stabilized/ reinforced earth wall including grading,
placement and compaction complete as per drawing, Technical
specification and as directed by the Engineer-in-charge. The backfill
material shall be clean, free draining, granular with high friction and low
cohesion having particle size not more than 100mm and angle of
internal friction not less than 34 degree, plasticity index shall not exceed
6 as determined by AASHTO T 90, non-corrosive, coarse grained with
not 10 per cent of particles passing 75 micron sieve, free of shale or
other soft, poor durability particles, any deleterious matter, chlorides,
salts, acids, alkalies, mineral oil, fungus and microbes and pH shall be
between 5.0 to 10.0 as determined by AASHTO T 289. The backfill
material shall be compacted for AASHTO T 236 to 95 percent of the
maximum density determined according to AASHTO T 99 method C or D
and corrected for oversized material according to AASHTO T 99, Note 9.
1st Class Picked Brick Bats 0.6650 m3 2150.00 1429.75
Sand (FM - 1.0) 0.6650 m3 567.00 377.06
Ordinary Labour 0.5000 day 370.00 185.00
H.C. of Plate Compactor (LF-72) 0.0313 day 850.00 26.61
H.C. of Water Tanker (Towed by Tractor) 0.0020 day 1500.00 3.00
Subtotal-A: 2021.41
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 2061.84
Note : Rates of all items should be inclusive of all supply and carriage. Page: 958 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.19.06 Jet Grouting: Execution of Jet grouted pile including mobilization &
demobilization of Jet Grouting Machine, cost of furnishing all materials,
labour and equipment necessary to complete the work, cost of trial
columns, coring, testing and disposal of waste materials. Every
completed jet grouted column/s shall be supported with Jet Grout Pile
Data. No separate payment shall be made for drilling holes,
washing/cleaning of holes, placing grout, labor, equipment, processing,
mixing, hooking-up to the hole, injecting grout, hole closures, clearing
up, cost of furnishing samples of grouting materials, providing
assistance for sampling including verification testing, all of which shall
be considered part of the Work of jet grouting.
Note : Rates of all items should be inclusive of all supply and carriage. Page: 959 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 2159.51
Other consumables etc. ( +10.00 % on Subtotal-A ) 215.95
Subtotal-A1: 2375.46
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 2422.97
Note : Rates of all items should be inclusive of all supply and carriage. Page: 960 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 3857.81
Other consumables etc. ( +10.00 % on Subtotal-A ) 385.78
Subtotal-A1: 4243.59
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 4328.46
Note : Rates of all items should be inclusive of all supply and carriage. Page: 961 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 6017.32
Other consumables etc. ( +10.00 % on Subtotal-A ) 601.73
Subtotal-A1: 6619.05
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 6751.43
Note : Rates of all items should be inclusive of all supply and carriage. Page: 962 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 8659.31
Other consumables etc. ( +10.00 % on Subtotal-A ) 865.93
Subtotal-A1: 9525.24
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 9715.75
Note : Rates of all items should be inclusive of all supply and carriage. Page: 963 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.19.07 Soil Nailing: Supply and installation of soil nail of specified diameter,
spacing and length as shown in drawings including setting-up, drilling in
soil or rock, galvanized re-bar, centralizers, grout injection (30 MPa
Concrete) as specified in specification. Works also include supply and fix
nail head and all necessary works for proper completion including UPVC
pipe as casing required for soil nailing work.
The constractor shall submit the Methodology for the installtion of Soil
Nail to the Engineer-in-charge for prior written approval (at least 7
days) before the commencement of works.
The constractor shall keep records for each soil nail installation and
submit one signed copy to the Engineer not later than next working day
after the soil nails have been installed. The record for each soil nail shall
include soil nail reference number, date/time of commencement and
completion of drilling and grouting, names of supervisor and operators,
the necessary drilling and grouting details etc.
Only dry type drilling equipment shall be used to minimize slope
disturbance.
Note : Rates of all items should be inclusive of all supply and carriage. Page: 964 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.19.07.01 Diameter of Drill Hole: 100 mm, Diameter of Re-bar = 25mm (Grade m
500, conforming to BDS ISO 6935-2:2006)
Hire and running charges for horizontal/inclined rock drilling 0.0110 day 20000.00 220.00
machine (Diameter of Drill Hole = 125mm)
H.C. of Grout pump with agitator & accessories 0.0440 hour 200.00 8.80
H.C. of Generator (40 KVA) 0.0060 day 2500.00 15.00
Ordinary Portland Cement (CEM I, 52.5N) 0.1110 bag 455.00 50.51
M.S. Ribbed/ Deformed Bar (Grade 500) 4.3330 kg 57.00 246.98
Hot-dip Galvanizing in accordance with BS EN ISO 1461: 4.3330 kg 65.00 281.65
1999 with minimum coat thickness of 85 microns or 610 gm
per square meter
Nails/ Nut bolts/ Screw/ Spikes 0.5560 kg 65.00 36.14
PVC Centralizers for Soil Nails 0.3330 each 50.00 16.65
Skilled Labour 0.0440 day 450.00 19.80
Foreman 0.0110 day 800.00 8.80
Operator 0.0110 day 570.00 6.27
Helper of Plumber/ Electric Mistry/ Painter/ Carpenter/ 0.0220 day 470.00 10.34
Operator
Ordinary Labour 0.0670 day 370.00 24.79
Subtotal-A: 945.72
Other consumables etc. ( +10.00 % on Subtotal-A ) 94.57
Subtotal-A1: 1040.29
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 1061.10
Note : Rates of all items should be inclusive of all supply and carriage. Page: 965 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.19.08 Conducting pull out test for soil nail to 1.5 × Working Load or as LS
specified by E-I-C providing all necessary resources including all torque
wrenhches, jacks, gauges, reaction frame, pump, load cell, bearing
plates, and other equipment required to carry out the pull-out test of
the soil nails as specified in Engineer's specification. The complete
jacking system including hydraulic jack, pump and pressure gauge
should be calibrated as single unit before use to an accuracy of not less
than 5% of the applied load.
4.19.09 Anchor Bar: Fixing anchor bars upto 28mm. dia to the founding level at
rock strata as per approved design including cost, conveyance & all
taxes of all materials and T&P required for the work but excluding cost
of TS rod & labour charges for bending, binding, tying the grills &
placing in position as per specification & direction of Engineer-in-Charge.
Note : Rates of all items should be inclusive of all supply and carriage. Page: 966 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 579.92
MS pipe Thread 40mm long including Tools & ( +7.50 % on Subtotal-A ) 43.49
Equipment
Subtotal-A1: 623.42
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 635.89
Note : Rates of all items should be inclusive of all supply and carriage. Page: 967 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
4.19.10 Rock Drilling: Drilling hole of specified length and diameter (more than
150mm diameter) below foundation bed at weathered rock/rock strata
in flat/slopping ground by special drilling equipment with diamond drill
bit including mobilization & demobilization of drilling equipment, setting-
up, drilling in rock as per drawing, specification & direction of Engineer-
in-Charge.
The constractor shall submit the Methodology for the drilling holes in
rock to the Engineer-in-charge for prior written approval (at least 7
days) before the commencement of works.
Subtotal-A: 6586.25
Other consumables etc. ( +10.00 % on Subtotal-A ) 658.63
Subtotal-A1: 7244.88
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 7389.77
Note : Rates of all items should be inclusive of all supply and carriage. Page: 968 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 7531.62
Other consumables etc. ( +10.00 % on Subtotal-A ) 753.16
Subtotal-A1: 8284.78
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 8450.48
Note : Rates of all items should be inclusive of all supply and carriage. Page: 969 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
5.01.01 Providing Layout and carry over Bench Mark (BM) at site from nearby sqm
BM pillar, demarcating property lines, existing ground level (EGL),
formation ground level (FGL), highest flood level (HFL), plinth level (PL).
Setting and marking all pillars, markers, pegs etc. showing and
maintaining reduced levels (RLs) including locating, establishing,
protecting all public utilities within the premise of work and finally all to
be presented in black and white etc. all complete as per direction of the
E-I-C.
Surveyor 0.0022 day 1400.00 3.08
Surveyor Helper 0.0022 day 800.00 1.76
H. C. of Level/Theodolite 0.0022 day 600.00 1.32
Ordinary Labour 0.0044 day 370.00 1.63
Subtotal-A: 7.79
Construction & Protect bench-mark, test pit,tools- ( +20.00 % on Subtotal-A ) 1.56
plants, etc
Subtotal-A1: 9.35
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 9.53
Note : Rates of all items should be inclusive of all supply and carriage. Page: 970 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 124.75
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 127.25
Note : Rates of all items should be inclusive of all supply and carriage. Page: 971 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
5.02.02 Sand filling in foundation trenches and inside plinth with sand cum
(minimum FM 0.50) in 150mm layers in/c leveling, watering and
consolidating each layer up to finished level etc. all complete as per
direction of the E-I-C. Dry density after compaction shall not be less
than 95% of MDD (STD).
Sand (FM - 0.5) 1.1500 m3 420.00 483.00
Ordinary Labour 0.3000 day 370.00 111.00
Subtotal-A: 594.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 605.88
5.02.03 Sand filling in foundation trenches and inside plinth with sand (minimum cum
FM 0.80) in 150mm layers in/c leveling, watering and consolidating each
layer up to finished level etc. all complete as per direction of the E-I-C.
Dry density after compaction shall not be less than 95% of MDD (STD).
Sand (FM - 0.8) 1.1500 m3 480.00 552.00
Ordinary Labour 0.3000 day 370.00 111.00
Subtotal-A: 663.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 676.26
Note : Rates of all items should be inclusive of all supply and carriage. Page: 972 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
5.02.04 Sand filling in foundation trenches and inside plinth with sand (minimum cum
FM 1.20) in 150mm layers in/c leveling, watering and consolidating each
layer up to finished level, etc. all complete as per direction of the E-I-C.
(to be used only if required by the design). Dry density after compaction
shall not be less than 95% of MDD (STD).
Sand (FM - 1.2) 1.1500 m3 584.00 671.60
Ordinary Labour 0.3000 day 370.00 111.00
Subtotal-A: 782.60
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 798.25
5.02.05 Sand filling in foundation trenches and inside plinth with sand (minimum cum
FM 2.50) in 150mm layers in/c leveling, watering and consolidating each
layer up to finished level etc. all complete as per direction of the E-I-C.
(to be used only required by the design). Dry density after compaction
shall not be less than 95% of MDD (STD).
Sand (FM - 2.5) 1.1500 m3 1500.00 1725.00
Ordinary Labour 0.3000 day 370.00 111.00
Subtotal-A: 1836.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 1872.72
Note : Rates of all items should be inclusive of all supply and carriage. Page: 973 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
5.02.06 Earth filling inside plinth in 150mm layers with earth available within cum
90m of the building site, watering, leveling and consolidating each layer
up to finished level, etc. all complete as per direction of the E-I-C.. Dry
density after compaction shall not be less than 90% of MDD (STD).
Sardar 0.0040 day 800.00 3.20
Ordinary Labour 0.8600 day 370.00 318.20
Subtotal-A: 321.40
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 327.83
Note : Rates of all items should be inclusive of all supply and carriage. Page: 974 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 288.20
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 293.96
Subtotal-A: 270.20
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 275.60
Note : Rates of all items should be inclusive of all supply and carriage. Page: 975 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 29.60
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 30.19
Note : Rates of all items should be inclusive of all supply and carriage. Page: 976 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 32.84
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 33.50
Note : Rates of all items should be inclusive of all supply and carriage. Page: 977 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 38.00
Driving and carriage cost ( +33.00 % on Subtotal-A ) 12.54
Subtotal-A1: 50.54
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 51.55
Note : Rates of all items should be inclusive of all supply and carriage. Page: 978 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
5.02.11 Supplying wooden ballah having an average diameter not less then 150 m
mm (without barks) at one third distance from large end with a
minimum end diameter of 100 mm for retaining purpose and driving to
a depth as per design drawing by any method including all arrangement
for staging. hoisting, carrying etc. complete and as directed by the E-I-C.
Shal/sundari/gazari Bullah (150mm to 200mm) 1.0000 m 225.00 225.00
Skilled Labour 0.1640 day 450.00 73.80
Ordinary Labour 0.5000 day 370.00 185.00
Subtotal-A: 483.80
Removing of skin, sizinf and coaltaring i/c hire ( +6.80 % on Subtotal-A ) 32.90
charge of monkey with driving arrangement.
Subtotal-A1: 516.70
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 527.03
Note : Rates of all items should be inclusive of all supply and carriage. Page: 979 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
5.02.12 Palisading work by Supplying bitumen drum sheet walling tied with 20 sqm
BWG G. I wire fixing the same with alredy driven borrak bamboo posts
with half split borrak bamboo runners @ 450mm c/c horizontally with
iron nails. G.I wire etc. all complete and as directed by the E-I-C.. (Rate
is excluding the cost of bamboo post)
Borak Bamboo (75mm dia) 1.3100 m 38.00 49.78
Bitumen Drum Sheet 1.4500 m2 269.00 390.05
Skilled Labour 0.1500 day 450.00 67.50
Ordinary Labour 0.2200 day 370.00 81.40
Subtotal-A: 588.73
Nails, gozzal and wire, local cariage, etc ( +16.00 % on Subtotal-A ) 94.20
Subtotal-A1: 682.93
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 696.59
Note : Rates of all items should be inclusive of all supply and carriage. Page: 980 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 259.44
Gajals,nails and wires, etc. ( +6.00 % on Subtotal-A ) 15.57
Subtotal-A1: 275.01
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 280.51
Note : Rates of all items should be inclusive of all supply and carriage. Page: 981 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 475.15
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 484.65
Note : Rates of all items should be inclusive of all supply and carriage. Page: 982 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 1000.93
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 1020.95
Note : Rates of all items should be inclusive of all supply and carriage. Page: 983 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
5.03.01.01 Single layer brick flat soling with 1st class or picked bricks, true to level, sqm
camber/super elevation and grade including carrying bricks, filling the
interstices tightly with sand of minimum FM 0.80, etc. all complete as
per direction of the E-I-C.
Sand (FM - 0.8) 0.0120 m3 480.00 5.76
Mason 0.0250 day 550.00 13.75
Ordinary Labour 0.1000 day 370.00 37.00
1st Class Brick 31.0000 each 9.00 279.00
Subtotal-A: 335.51
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 342.22
Note : Rates of all items should be inclusive of all supply and carriage. Page: 984 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
5.03.01.02 SCBFS (FM-0.80) Providing Single Layer Solid Concrete Block Flat Soling sqm
(SCBFS) with Solid Concrete Blocks having minimum compressive
strength of 20 Mpa, true to level, maintaining camber/super elevation
and grade including filling the interstices tightly with sand of minimum
FM 0.80, etc. all complete in all respect as per approved drawing,
specification and direction of the Engineer-in-charg.
Solid Concrete Block Size (240mmx110mmx70mm to
(215mmx100mmx70mm
Solid Concrete Bricks of Size (240x110x70)mm to 1.0000 sqm 651.16 651.16
(215x100x70)mm
Sand (FM - 0.8) 0.0120 m3 480.00 5.76
Mason 0.0250 day 550.00 13.75
Ordinary Labour 0.1000 day 370.00 37.00
Subtotal-A: 707.67
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 721.82
Note : Rates of all items should be inclusive of all supply and carriage. Page: 985 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
5.03.02 Brick on edge pavement in single layer of Herring Bone Bond with 1st sqm
class or picked bricks true to level, camber, super elevation and grade
over 25mm thick sand (minimum FM 0.80) cushion including filling the
interstices tightly with same type of sand, etc. all complete as per
direction of the E-I-C.
Sand (FM - 0.8) 0.0280 m3 480.00 13.44
Mason 0.0500 day 550.00 27.50
Ordinary Labour 0.1700 day 370.00 62.90
1st Class Brick 52.0000 each 9.00 468.00
Subtotal-A: 571.84
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 583.28
Note : Rates of all items should be inclusive of all supply and carriage. Page: 986 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
5.03.03 Brick on end edging (75mm across) with 1st class/picked bricks m
including cutting trenches true to level & grade including removing
earth, re-filling & ramming the sides properly & filling the gaps with
local sand, etc. all complete as per direction of the E-I-C.
Sand (FM - 0.5) 0.0030 m3 420.00 1.26
Mason 0.0080 day 550.00 4.40
Ordinary Labour 0.0300 day 370.00 11.10
1st Class Brick 8.0000 each 9.00 72.00
Subtotal-A: 88.76
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 90.54
Note : Rates of all items should be inclusive of all supply and carriage. Page: 987 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
5.03.04.01 Mass concrete in foundation (1:3:6) with Portland Composite Cement cum
(CEM II/AM, 42.5N), sand (minimum FM 1.20) and 20mm down well
graded 1st class/picked brick chips.
1st Class Brick Chips (20mm down graded) 0.9000 m3 2940.00 2646.00
Sand (FM - 1.2) 0.4500 m3 584.00 262.80
Portland Composite Cement (CEM-II/A-L/M/V/W 42.5N) 4.2400 bag 430.00 1823.20
Head Mason 0.0800 day 650.00 52.00
Mason 0.4200 day 550.00 231.00
Skilled Labour 0.7500 day 450.00 337.50
Ordinary Labour 1.8000 day 370.00 666.00
H.C. of Concrete Mixture Machine (Capacity 0.40/ 0.28 cum) 0.0600 day 1200.00 72.00
Hire and running charges of Concrete Vibrator 0.0600 day 400.00 24.00
Subtotal-A: 6114.50
Other costs (form work etc.) ( +.50 % on Subtotal-A ) 30.57
Subtotal-A1: 6145.07
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 6267.97
Note : Rates of all items should be inclusive of all supply and carriage. Page: 988 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
5.03.04.02 Mass concrete in floor (1:3:6) with Portland Composite Cement (CEM cum
II/AM, 42.5N), sand (minimum FM 1.20) and 20mm down well graded
1st class/picked brick chips..
1st Class Brick Chips (20mm down graded) 0.9000 m3 2940.00 2646.00
Sand (FM - 1.2) 0.4500 m3 584.00 262.80
Portland Composite Cement (CEM-II/A-L/M/V/W 42.5N) 4.2400 bag 430.00 1823.20
Head Mason 0.0800 day 650.00 52.00
Mason 0.7700 day 550.00 423.50
Skilled Labour 0.7500 day 450.00 337.50
Ordinary Labour 1.8000 day 370.00 666.00
H.C. of Concrete Mixture Machine (Capacity 0.40/ 0.28 cum) 0.0600 day 1200.00 72.00
Hire and running charges of Concrete Vibrator 0.0600 day 400.00 24.00
Subtotal-A: 6307.00
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 6433.14
Note : Rates of all items should be inclusive of all supply and carriage. Page: 989 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
5.03.05.01 Mass concrete in foundation (1:2:4) with Portland Composite Cement cum
(CEM II/AM, 42.5N), sand (minimum FM 1.20) and 20mm down well
graded 1st class/picked brick chips.
1st Class Brick Chips (20mm down graded) 0.8600 m3 2940.00 2528.40
Sand (FM - 1.2) 0.4300 m3 584.00 251.12
Portland Composite Cement (CEM-II/A-L/M/V/W 42.5N) 6.0540 bag 430.00 2603.22
Head Mason 0.0800 day 650.00 52.00
Mason 0.4200 day 550.00 231.00
Skilled Labour 0.7500 day 450.00 337.50
Ordinary Labour 1.8000 day 370.00 666.00
H.C. of Concrete Mixture Machine (Capacity 0.40/ 0.28 cum) 0.0600 day 1200.00 72.00
Hire and running charges of Concrete Vibrator 0.0600 day 400.00 24.00
Subtotal-A: 6765.24
Other cost (from work etc) ( +.50 % on Subtotal-A ) 33.83
Subtotal-A1: 6799.07
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 6935.05
Note : Rates of all items should be inclusive of all supply and carriage. Page: 990 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
5.03.05.02 Mass concrete in floor (1:2:4) with Portland Composite Cement (CEM cum
II/AM, 42.5N), sand (minimum FM 1.20) and 20mm down well graded
1st class/picked brick chips.
1st Class Brick Chips (20mm down graded) 0.8600 m3 2940.00 2528.40
Sand (FM - 1.2) 0.4300 m3 584.00 251.12
Portland Composite Cement (CEM-II/A-L/M/V/W 42.5N) 6.0540 bag 430.00 2603.22
Head Mason 0.0800 day 650.00 52.00
Mason 0.7700 day 550.00 423.50
Skilled Labour 0.7500 day 450.00 337.50
Ordinary Labour 1.8000 day 370.00 666.00
H.C. of Concrete Mixture Machine (Capacity 0.40/ 0.28 cum) 0.0600 day 1200.00 72.00
Hire and running charges of Concrete Vibrator 0.0600 day 400.00 24.00
Subtotal-A: 6957.74
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 7096.89
Note : Rates of all items should be inclusive of all supply and carriage. Page: 991 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
5.03.06 75mm thick lean cement concrete (1:3:6) in floor and wherever needed sqm
with Portland Composite Cement (CEM II/AM, 42.5N), best quality
coarse sand (minimum FM1.2) and 20mm down well graded picked
brick chips (LAA value not exceeding 38), in/c breaking bricks into chips
screening, mixing by concrete mixer machine, laying, compacting,
washing of sand, curing for requisite period, etc. all complete as per
direction of the E-I-C.
1st Class Picked Brick Chips (20mm down graded) 0.0700 m3 2940.00 205.80
Sand (FM - 1.2) 0.0340 m3 584.00 19.86
Portland Composite Cement (CEM-II/A-L/M/V/W 42.5N) 0.3230 bag 430.00 138.89
Head Mason 0.0070 day 650.00 4.55
Mason 0.0200 day 550.00 11.00
Skilled Labour 0.0600 day 450.00 27.00
Ordinary Labour 0.1300 day 370.00 48.10
H.C. of Concrete Mixture Machine (Capacity 0.40/ 0.28 cum) 0.0044 day 1200.00 5.28
Subtotal-A: 460.48
Form Work ( +.04 % on Subtotal-A ) 0.18
Subtotal-A1: 460.66
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 469.87
Note : Rates of all items should be inclusive of all supply and carriage. Page: 992 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
5.03.07 25mm thick Damp Proof Course (DPC) with cement concrete (1:2:4) in sqm
Portland Composite Cement (CEM II/AM, 42.5N), sand (minimum FM
1.80) and 10mm down well graded 1st class/picked brick chips (LAA
value not exceeding 38), in/c casting by concrete mixture machine,
compacting, curing for requisite period, coal tar/bitumen painting, etc.
all complete as per direction of the E-I-C.
1st Class Brick Chips (10mm down graded) 0.0220 m3 3049.00 67.08
Sand (FM - 1.8) 0.0110 m3 970.00 10.67
Portland Composite Cement (CEM-II/A-L/M/V/W 42.5N) 0.1540 bag 430.00 66.22
Head Mason 0.0200 day 650.00 13.00
Mason 0.0700 day 550.00 38.50
Skilled Labour 0.0900 day 450.00 40.50
Ordinary Labour 0.0900 day 370.00 33.30
H.C. of Concrete Mixture Machine (Capacity 0.40/ 0.28 cum) 0.0015 day 1200.00 1.80
Subtotal-A: 271.07
Others costs (Tar/Bitumen/Painting etc.) ( +1.00 % on Subtotal-A ) 2.71
Subtotal-A1: 273.78
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 279.25
Note : Rates of all items should be inclusive of all supply and carriage. Page: 993 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
5.03.08 38mm thick Damp Proof Course (DPC) with cement concrete (1:1.5:3) sqm
in Portland Composite Cement (CEM II/AM, 42.5N), sand (minimum FM
1.80) and 10mm down well graded 1st class/picked brick chips (LAA
value not exceeding 38), in/c casting by concrete mixture machine,
compacting, curing for requisite period, coal tar/bitumen painting, etc.
all complete as per direction of the E-I-C.
1st Class Brick Chips (10mm down graded) 0.0310 m3 3049.00 94.52
Sand (FM - 1.8) 0.0160 m3 970.00 15.52
Portland Composite Cement (CEM-II/A-L/M/V/W 42.5N) 0.2930 bag 430.00 125.99
Head Mason 0.0200 day 650.00 13.00
Mason 0.0700 day 550.00 38.50
Skilled Labour 0.0900 day 450.00 40.50
Ordinary Labour 0.0900 day 370.00 33.30
H.C. of Concrete Mixture Machine (Capacity 0.40/ 0.28 cum) 0.0022 day 1200.00 2.64
Subtotal-A: 363.97
Others costs ( +1.00 % on Subtotal-A ) 3.64
Subtotal-A1: 367.61
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 374.96
Note : Rates of all items should be inclusive of all supply and carriage. Page: 994 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
5.03.09 Providing single layer polythene sheet (0.18mm thick) weighing one sqm
kilogram per 6.5 square meter in floor or any where in ground floor
underneath the cement concrete, etc. all complete as per specifications
and direction of the E-I-C.
0.18mm thick polythene sheet 1.0000 m2 12.31 12.31
Ordinary Labour 0.0100 day 370.00 3.70
Subtotal-A: 16.01
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 16.33
Note : Rates of all items should be inclusive of all supply and carriage. Page: 995 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 555.00
Cost of carriage, tools, plants & other remaining ( +5.00 % on Subtotal-A ) 27.75
cost etc.
Subtotal-A1: 582.75
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 594.41
Note : Rates of all items should be inclusive of all supply and carriage. Page: 996 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
5.04.01 Brick work with 1st class bricks in cement mortar (1:6) in foundation cum
and plinth with Portland Composite cement (CEM II/AM, 42.5N) and
best quality sand (minimum FM1.2), filling the interstices tightly with
mortar, raking out joints, cleaning and soaking bricks at least for 24
hours before use, washing of sand, curing for requisite period, etc. all
complete as per direction of the E-I-C.
1st Class Brick 406.0000 each 9.00 3654.00
Sand (FM - 1.2) 0.3600 m3 584.00 210.24
Portland Composite Cement (CEM-II/A-L/M/V/W 42.5N) 1.4000 bag 430.00 602.00
Head Mason 0.0600 day 650.00 39.00
Mason 0.7000 day 550.00 385.00
Skilled Labour 0.7000 day 450.00 315.00
Ordinary Labour 1.0000 day 370.00 370.00
Subtotal-A: 5575.24
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 5686.74
Note : Rates of all items should be inclusive of all supply and carriage. Page: 997 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
5.04.02 Brick work with 1st class bricks in cement mortar (1:4) in foundation cum
and plinth with Portland Composite cement (CEM II/AM, 42.5N) and
best quality sand (minimum FM1.2), filling the interstices tightly with
mortar, raking out joints, cleaning and soaking bricks at least for 24
hours before use, washing of sand, curing for requisite period, etc. all
complete as per direction of the E-I-C.
1st Class Brick 406.0000 each 9.00 3654.00
Sand (FM - 1.2) 0.3000 m3 584.00 175.20
Portland Composite Cement (CEM-II/A-L/M/V/W 42.5N) 2.1200 bag 430.00 911.60
Head Mason 0.0600 day 650.00 39.00
Mason 0.7000 day 550.00 385.00
Skilled Labour 0.7000 day 450.00 315.00
Ordinary Labour 1.0000 day 370.00 370.00
Subtotal-A: 5849.80
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 5966.80
5.04.03 Brick work of 1st class bricks in cement mortar (1:6) in superstructure
with Portland Composite cement (CEM II/AM, 42.5N) and best quality
sand (minimum FM1.2) with uniform width and depth joints, true to
vertical and horizontal lines, in/c raking out joints, filling interstices
tightly with mortar, cleaning and soaking bricks at least for 24 hours
before use, washing of sand, necessary scaffolding, curing for requisite
period, etc. all complete as per direction of the E-I-C.
Note : Rates of all items should be inclusive of all supply and carriage. Page: 998 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 5767.64
Scaffolding ( +1.50 % on Subtotal-A ) 86.51
Subtotal-A1: 5854.15
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 5971.24
5.04.03.02 Add for each additional floor up to 5th floor cum Add +1.20% with Item No 5.04.03.01
5.04.03.03 Add for each additional floor from 6th floor up to 9th floor cum Add +1.50% with Item No 5.04.03.01
5.04.03.04 Add for each additional floor for 10th floor and above cum Add +2.00% with Item No 5.04.03.01
5.04.04 Brick work with 1st class bricks in cement mortar (1:4) in exterior walls
with Portland Composite cement (CEM II/AM, 42.5N) and best quality
sand (minimum FM1.2) with uniform width and depth joints, true to
vertical and horizontal lines, in/c filling the interstices tightly with
mortar, racking out joints, cleaning and soaking bricks at least for 24
hours before use, washing of sand, necessary scaffolding, curing for
requisite period, etc. all complete as per direction of the E-I-C.
Note : Rates of all items should be inclusive of all supply and carriage. Page: 999 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 6042.20
Scaffolding ( +1.50 % on Subtotal-A ) 90.63
Subtotal-A1: 6132.83
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 6255.49
5.04.04.02 Add for each additional floor up to 5th floor cum Add +1.10% with Item No 5.04.04.01
5.04.04.03 Add for each additional floor from 6th floor up to 9th floor cum Add +1.40% with Item No 5.04.04.01
5.04.04.04 Add for each additional floor for 10th floor and above cum Add +1.80% with Item No 5.04.04.01
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1000 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
5.04.05 Exposed brick work (for exterior wall without outside plaster) with
special quality sorted out 1st class bricks, very carefully laid in cement
mortar (1:4) in superstructure with Portland Composite cement (CEM
II/AM, 42.5N) and best quality sand (minimum FM1.2) with uniform
width and depth joints, true to vertical and horizontal lines in/c racking
out joints, scaffolding, soaking the bricks at least for 24 hours before
use, washing of sand, curing for requisite period and high class flush
pointing with cement mortar (1:1) , etc. all complete as per direction of
the E-I-C.
Subtotal-A: 6111.20
Scaffolding ( +1.50 % on Subtotal-A ) 91.67
Subtotal-A1: 6202.87
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 6326.93
5.04.05.02 Add for each additional floor up to 5th floor cum Add +1.00% with Item No 5.04.05.01
5.04.05.03 Add for each additional floor from 6th floor up to 9th floor cum Add +1.16% with Item No 5.04.05.01
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1001 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
5.04.05.04 Add for each additional floor for 10th floor and above cum Add +1.54% with Item No 5.04.05.01
5.04.06 Brick work with 10 holes machine made bricks of approved size having
uniform colour, carefully laid in cement mortar (1:4) in superstructure
with Portland Composite cement (CEM II/AM, 42.5N) and best quality
sand (minimum FM1.2) with uniform width and depth joints, true to
vertical and horizontal lines in/c raking out joints, filling the interstices
with mortar, cleaning and soaking the bricks at least for 24 hours before
use, washing of sand, necessary scaffolding, curing for requisite period
and pointing with cement mortar (1:2), etc. all complete as per direction
of the E-I-C.
Subtotal-A: 10139.20
Scaffolding ( +1.00 % on Subtotal-A ) 101.39
Subtotal-A1: 10240.59
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 10445.40
5.04.06.02 Add for each additional floor up to 5th floor cum Add +.80% with Item No 5.04.06.01
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1002 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
5.04.06.03 Add for each additional floor from 6th floor up to 9th floor cum Add +1.00% with Item No 5.04.06.01
5.04.06.04 Add for each additional floor for 10th floor and above cum Add +1.30% with Item No 5.04.06.01
5.04.07 Extra rate over the rate of Ground Floor (or any floor as the case may cum
be) for each additional meter height of brick wall in Auditorium,
Godown, Overhead water tank, etc. where free height of the structure
exceeds beyond 4.00 meter up to 11 meter. The description of the item
is same as in item nos. 5.04.03, 5.04.04, 5.04.05 and 5.04.06 above.
(For each additional meter of extra height beyond 4.00 meter)
(For extra height the total height of the wall from the floor should be
measured and then 4.00 meter to be deducted. The maximum rate thus
calculated on the top height of the wall shall be admissible for the whole
volume of brick work above 4.00 meter. Extra payment shall be
admissible only when both sides of the wall is uninterruptedly free
beyond 4.00 meter)
Head Mason 0.0200 day 650.00 13.00
Mason 0.0400 day 550.00 22.00
Skilled Labour 0.0400 day 450.00 18.00
Ordinary Labour 0.0600 day 370.00 22.20
Subtotal-A: 75.20
Scaffolding ( +29.00 % on Subtotal-A ) 21.81
Subtotal-A1: 97.01
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 98.95
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1003 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 1498.92
Scaffolding and other ( +1.30 % on Subtotal-A ) 19.49
Subtotal-A1: 1518.41
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 1548.77
5.04.08.01.02 Add for each additional floor up to 5th Floor sqm Add +1.00% with Item No 5.04.08.01.01
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1004 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
5.04.08.01.03 Add for each additional floor from 6th up to 9th Floor sqm Add +1.16% with Item No 5.04.08.01.01
5.04.08.01.04 Add for each additional floor for 10th Floor and above sqm Add +1.54% with Item No 5.04.08.01.01
Subtotal-A: 1941.92
Scaffolding and others ( +1.30 % on Subtotal-A ) 25.24
Subtotal-A1: 1967.16
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 2006.51
5.04.08.02.02 Add for each additional floor up to 5th Floor sqm Add +1.00% with Item No 5.04.08.02.01
5.04.08.02.03 Add for each additional floor from 6th up to 9th Floor sqm Add +1.16% with Item No 5.04.08.02.01
5.04.08.02.04 Add for each additional floor for 10th Floor and above sqm Add +1.54% with Item No 5.04.08.02.01
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1005 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
5.04.09 125mm brick work with 1st class bricks in cement mortar (1:6) with
Portland Composite cement (CEM II/AM, 42.5N) and best quality sand
(minimum FM1.2) and making bond with connected walls with uniform
width and depth joints, true to vertical and horizontal lines in/c
necessary scaffolding, raking out joints, cleaning and soaking the bricks
at least for 24 hours before use, washing of sand, curing for requisite
period, etc. all complete as per direction of the E-I-C.
Subtotal-A: 777.84
Scaffolding ( +5.00 % on Subtotal-A ) 38.89
Subtotal-A1: 816.73
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 833.07
5.04.09.02 Add for each additional floor up to 5th floor sqm Add +1.30% with Item No 5.04.09.01
5.04.09.03 Add for each additional floor from 6th floor up to 9th floor sqm Add +1.60% with Item No 5.04.09.01
5.04.09.04 Add for each additional floor for 10th floor and above sqm Add +2.30% with Item No 5.04.09.01
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1006 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
5.04.10 125mm brick work with 1st class bricks in cement mortar (1:4) with
Portland Composite cement (CEM II/AM, 42.5N) and best quality sand
(minimum FM1.2) and making bond with connected walls with uniform
width and depth joints, true to vertical and horizontal lines in/c
necessary scaffolding, raking out joints, cleaning and soaking the bricks
at least for 24 hours before use, washing of sand, curing for requisite
period, etc. all complete as per direction of the E-I-C.
Subtotal-A: 810.70
Scaffolding ( +3.00 % on Subtotal-A ) 24.32
Subtotal-A1: 835.02
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 851.72
5.04.10.02 Add for each additional floor up to 5th floor sqm Add +1.30% with Item No 5.04.10.01
5.04.10.03 Add for each additional floor from 6th floor up to 9th floor sqm Add +1.60% with Item No 5.04.10.01
5.04.10.04 Add for each additional floor for 10th floor and above sqm Add +2.30% with Item No 5.04.10.01
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1007 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
5.04.11 125mm thick partition wall brick work with 10 holes machine made
ceramic bricks of approved size having uniform colour, carefully laid in
cement mortar (1:4) in superstructure with Portland Composite cement
(CEM II/AM, 42.5N) and best quality sand (minimum FM1.2) with
uniform width and depth joints, true to vertical and horizontal lines in/c
raking out joints, filling the interstices with mortar, cleaning and soaking
the bricks at least for 24 hours before use, washing of sand, necessary
scaffolding, curing for requisite period and pointing with cement mortar
(1:2), etc. all complete as per direction of the E-I-C.
Subtotal-A: 1325.50
Scaffolding ( +2.40 % on Subtotal-A ) 31.81
Subtotal-A1: 1357.31
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 1384.46
5.04.11.02 Add for each additional floor up to 5th floor sqm Add +1.00% with Item No 5.04.11.01
5.04.11.03 Add for each additional floor from 6th floor up to 9th floor sqm Add +1.20% with Item No 5.04.11.01
5.04.11.04 Add for each additional floor for 10th floor and above sqm Add +1.70% with Item No 5.04.11.01
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1008 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
5.04.12 125mm thick Jaffrey brick work with 1st class bricks and cement sand sqm
mortar (1:4) with Portland Composite cement (CEM II/AM, 42.5N) and
best quality sand (minimum FM1.2) in/c raking out joints, filling the
interstices with mortar, cleaning and soaking the bricks at least for 24
hours before use, washing of sand, necessary scaffolding, curing for
requisite period etc. all complete as per direction of the E-I-C. .
1st Class Brick 30.0000 each 9.00 270.00
Sand (FM - 1.2) 0.0070 m3 584.00 4.09
Portland Composite Cement (CEM-II/A-L/M/V/W 42.5N) 0.0500 bag 430.00 21.50
Mason 0.1500 day 550.00 82.50
Ordinary Labour 0.2240 day 370.00 82.88
Subtotal-A: 460.97
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 470.19
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1009 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
5.04.13 75mm thick cornice of brick masonry in cement mortar (1:4) having m
minimum 12mm thick cement plaster (1:6) with Portland Composite
cement (CEM II/AM, 42.5N) and best quality sand (minimum FM1.2),
in/c scaffolding and curing for requisite period in all floors, etc. all
complete as per direction of the E-I-C.
Exposed brick work for ground floor (for exterior wall without 0.0060 cum 6202.87 37.22
outside plaster)….(5.04.05.01)
12mm thick cement plaster (1:6) to wall for ground 0.2400 sqm 184.48 44.27
floor…..(5.12.02.01)
Ordinary Labour 0.3300 day 370.00 122.10
Subtotal-A: 203.59
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 207.66
5.04.14 Fancy screen (Ornamental Screen) work with different size machine
made design blocks with uniform colour, carefully laid in coloured
cement mortar (1:3) in all floors in wall with Portland Composite cement
(CEM II/AM, 42.5N) and best quality sand (minimum FM1.2) with
uniform mortar joints, true to vertical and horizontal line including
racking out joints, cleaning and soaking the blocks for minimum 24
hours before use including washing and screening of sand, scaffolding,
curing for requisite period etc. complete in all respect including supply
of all necessary materials including cost of water, electricity and other
charges etc. all complete as per direction of the E-I-C.
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1010 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 2658.01
Scaffolding ( +1.30 % on Subtotal-A ) 34.55
Subtotal-A1: 2692.56
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 2746.41
5.04.14.01.2 Add for each additional floor up to 5th Floor sqm Add +1.00% with Item No 5.04.14.01.1
5.04.14.01.3 Add for each additional floor from 6th up to 9th Floor sqm Add +1.16% with Item No 5.04.14.01.1
5.04.14.01.4 Add for each additional floor for 10th Floor and above sqm Add +1.54% with Item No 5.04.14.01.1
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1011 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 2112.01
Scaffolding ( +1.30 % on Subtotal-A ) 27.46
Subtotal-A1: 2139.46
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 2182.25
5.04.14.02.2 Add for each additional floor up to 5th Floor sqm Add +1.00% with Item No 5.04.14.02.1
5.04.14.02.3 Add for each additional floor from 6th up to 9th Floor sqm Add +1.16% with Item No 5.04.14.02.1
5.04.14.02.4 Add for each additional floor for 10th Floor and above sqm Add +1.54% with Item No 5.04.14.02.1
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1012 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 1918.01
Scaffolding ( +1.30 % on Subtotal-A ) 24.93
Subtotal-A1: 1942.94
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 1981.80
5.04.14.03.2 Add for each additional floor up to 5th Floor sqm Add +1.00% with Item No 5.04.14.03.1
5.04.14.03.3 Add for each additional floor from 6th up to 9th Floor sqm Add +1.16% with Item No 5.04.14.03.1
5.04.14.03.4 Add for each additional floor for 10th Floor and above sqm Add +1.54% with Item No 5.04.14.03.1
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1013 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
5.04.15 Exposed brick work (for exterior wall without outside plaster) with
automatic machine made 1st class bricks, very carefully laid in cement
mortar (1:4) in superstructure with Portland Composite cement (CEM
II/AM, 42.5N) and best quality sand (minimum FM1.2) with uniform
width and depth joints, true to vertical and horizontal lines in/c racking
out joints, scaffolding, soaking the bricks at least for 24 hours before
use, washing of sand, curing for requisite period and high class flush
pointing with cement mortar (1:1) , etc. all complete as per direction of
the E-I-C.
Subtotal-A: 6111.20
Scaffolding ( +1.50 % on Subtotal-A ) 91.67
Subtotal-A1: 6202.87
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 6326.93
5.04.15.02 Add for each additional floor up to 5th Floor cum Add +1.00% with Item No 5.04.15.01
5.04.15.03 Add for each additional floor from 6th up to 9th Floor cum Add +1.16% with Item No 5.04.15.01
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1014 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
5.04.15.04 Add for each additional floor for 10th Floor and above cum Add +1.54% with Item No 5.04.15.01
Subtotal-A: 377.40
Cost of carriage, tools, plants & other remaining ( +5.00 % on Subtotal-A ) 18.87
cost etc.
Subtotal-A1: 396.27
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 404.20
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1015 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
5.05.01 RCC:1:2:4, 17MPa, Brick Chips (BC): Reinforced cement concrete works
with minimum cement content relates to mix ratio (tentative 1:2:4) and
maximum water cement ratio 0.45 having minimum required average
strength, f'cr = 24 Mpa and satisfied a specified compressive strength
f'c = 17 Mpa at 28 days on standard cylinders as per standard practice
of Code AASHTO/ ASTM and Portland Composite Cement conforming to
BDS EN 197-1 : 2003 CEM-II 42.5N sand of minimum FM 1.8 and
20mm down well graded picked brick chips (LAA value and maximum
water absorption not exceeding 38 and 15% respectively) conforming to
ASTM C 33 or Aggregate Grading Appendix-3 LGED Schedule of Rates
or any other International recognized envelop in/c breaking chips and
screening through proper sieves, centering, shuttering in position,
making shuttering fully leak proof & shuttering with plain 16 BWG steel
sheet fitted over 38mm thick wooden plank panels and Standard size
Bamboo Props suitably braced, placing of reinforcement in position,
mixing the aggregates with standard mixer machine with hoper, fed by
standard measuring boxes, maintaining allowable slump of 50mm
(without plasticizer) & 75mm to 100mm (when plasticizer use), pouring,
casting, compacting by mechanical vibrator machine and curing at least
for 28 days, removing centering-shuttering after approved specified
time period, i/c cost of additional testing charges of materials and
cylinders required. Excluding the cost of reinforcement and its
fabrication, welding, coupling, placing, binding etc. Additional quantity
of cement and Plasticizer i.e. Water reducing chemical admixture of
complying type A under ASTM C 494 to reduce mixing water required
for normal workability and to maintain low water-cement (W/C) ratio
(Doses of admixture to be fixed by the mix design from approved
laboratory instruction by the Engineer) Additional quantity of cement to
be added if required to attain the strength at the contractor's own cost)
etc. all complete as per direction and approval of the Engineer in charge.
Note : Using Concrete Mixer.
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1016 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
5.05.01.01 In individual and continuous footing of column, raft and floor slab at cum
plinth level.
1st Class Picked Brick Chips (20mm down graded) 0.5200 m3 2940.00 1528.80
Sand (FM - 1.8) 0.4300 m3 970.00 417.10
Portland Composite Cement (CEM-II/A-L/M/V/W 42.5N) 6.0600 bag 430.00 2605.80
Head Mason 0.0800 day 650.00 52.00
Mason 0.4200 day 550.00 231.00
Skilled Labour 0.7500 day 450.00 337.50
Ordinary Labour 2.0000 day 370.00 740.00
H.C. of Concrete Mixture Machine (Capacity 0.40/ 0.28 cum) 0.0600 day 1200.00 72.00
Hire and running charges of Concrete Vibrator 0.0600 day 400.00 24.00
1st Class Brick Chips (10mm down graded) 0.3400 m3 3049.00 1036.66
Subtotal-A: 7044.86
Wooden form work & all other remaining costs ( +8.50 % on Subtotal-A ) 598.81
Subtotal-A1: 7643.67
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 7796.55
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1017 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 7044.86
Wooden form work & all other remaining costs ( +20.00 % on Subtotal-A ) 1408.97
Subtotal-A1: 8453.83
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 8622.91
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1018 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 7044.86
Wooden form work & all other remaining costs ( +56.00 % on Subtotal-A ) 3945.12
Subtotal-A1: 10989.98
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 11209.78
5.05.01.03.2 Add for each additional floor up to 5th Floor cum Add +.36% with Item No 5.05.01.03.1
5.05.01.03.3 Add for each additional floor from 6th floor upto 9th floor cum Add +.66% with Item No 5.05.01.03.1
5.05.01.03.4 Add for each additional floor for 10th floor and above cum Add +.87% with Item No 5.05.01.03.1
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1019 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 7044.86
Wooden form work & all other remaining costs ( +35.00 % on Subtotal-A ) 2465.70
Subtotal-A1: 9510.56
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 9700.77
5.05.01.04.2 Add for each additional floor up to 5th Floor cum Add +.43% with Item No 5.05.01.04.1
5.05.01.04.3 Add for each additional floor from 6th floor upto 9th floor cum Add +.78% with Item No 5.05.01.04.1
5.05.01.04.4 Add for each additional floor for 10th floor and above cum Add +1.03% with Item No 5.05.01.04.1
5.05.01.05 In Tee Beam, Ell Beam, Rectangular Beam etc. (exposed breadth and
width of ribs to be measured only).
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1020 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 7044.86
Wooden form work & all other remaining costs ( +42.00 % on Subtotal-A ) 2958.84
Subtotal-A1: 10003.70
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 10203.78
5.05.01.05.2 Add for each additional floor up to 5th Floor cum Add +.40% with Item No 5.05.01.05.1
5.05.01.05.3 Add for each additional floor from 6th floor upto 9th floor cum Add +.71% with Item No 5.05.01.05.1
5.05.01.05.4 Add for each additional floor for 10th floor and above cum Add +.95% with Item No 5.05.01.05.1
5.05.01.06 In roof slab of all types, cantilever slab and drop panels (excluding floor
slab of ground floor at plinth level).
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1021 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 7044.86
Wooden form work & all other remaining costs ( +40.00 % on Subtotal-A ) 2817.94
Subtotal-A1: 9862.80
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 10060.06
5.05.01.06.2 Add for each additional floor up to 5th Floor cum Add +.41% with Item No 5.05.01.06.1
5.05.01.06.3 Add for each additional floor from 6th floor upto 9th floor cum Add +.74% with Item No 5.05.01.06.1
5.05.01.06.4 Add for each additional floor for 10th floor and above cum Add +.99% with Item No 5.05.01.06.1
5.05.01.07 In sunshade, cornice, railing, drop wall, louver and fins (Average 62mm
to 87mm thick)
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1022 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 7020.86
Wooden Form work & all other remaining costs ( +85.00 % on Subtotal-A ) 5967.73
Subtotal-A1: 12988.59
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 13248.36
5.05.01.07.2 Add for each additional floor up to 5th Floor cum Add +.98% with Item No 5.05.01.07.1
5.05.01.07.3 Add for each additional floor from 6th floor upto 9th floor cum Add +1.80% with Item No 5.05.01.07.1
5.05.01.07.4 Add for each additional floor for 10th floor and above cum Add +2.46% with Item No 5.05.01.07.1
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1023 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 7044.86
Wooden form work & all other remaining costs ( +43.00 % on Subtotal-A ) 3029.29
Subtotal-A1: 10074.15
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 10275.63
5.05.01.08.2 Add for each additional floor up to 5th Floor cum Add +.42% with Item No 5.05.01.08.1
5.05.01.08.3 Add for each additional floor from 6th floor upto 9th floor cum Add +.75% with Item No 5.05.01.08.1
5.05.01.08.4 Add for each additional floor for 10th floor and above cum Add +1.00% with Item No 5.05.01.08.1
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1024 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 7044.86
Wooden form work & all other remaining costs ( +120.00 % on Subtotal-A ) 8453.83
Subtotal-A1: 15498.69
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 15808.67
5.05.01.09.2 Add for each additional floor up to 5th Floor cum Add +.27% with Item No 5.05.01.09.1
5.05.01.09.3 Add for each additional floor from 6th floor upto 9th floor cum Add +.48% with Item No 5.05.01.09.1
5.05.01.09.4 Add for each additional floor for 10th floor and above cum Add +.63% with Item No 5.05.01.09.1
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1025 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1026 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
5.05.02.01 In individual and continuous footing of column, raft and floor slab at cum
plinth level.
Stone Chips (20mm down graded) [LAA≤35] 0.5200 cum 4930.00 2563.60
Sand (FM - 2.5) 0.2580 m3 1500.00 387.00
Portland Composite Cement (CEM-II/A-L/M/V/W 42.5N) 6.0600 bag 430.00 2605.80
Head Mason 0.0800 day 650.00 52.00
Mason 0.4200 day 550.00 231.00
Skilled Labour 0.7500 day 450.00 337.50
Ordinary Labour 2.0000 day 370.00 740.00
H.C. of Concrete Mixture Machine (Capacity 0.40/ 0.28 cum) 0.0600 day 1200.00 72.00
Hire and running charges of Concrete Vibrator 0.0600 day 400.00 24.00
Sand (FM - 1.8) 0.1720 m3 970.00 166.84
Water reducing chemical admixture : Type-A 1.2100 liter 130.00 157.30
Stone Chips (12mm down graded) [LAA≤35] 0.3400 cum 4320.00 1468.80
Subtotal-A: 8805.84
Wooden form work & all other remaining costs ( +7.00 % on Subtotal-A ) 616.41
Subtotal-A1: 9422.25
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 9610.69
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1027 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 8805.84
Wooden form work & all other remaining costs ( +18.00 % on Subtotal-A ) 1585.05
Subtotal-A1: 10390.89
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 10598.71
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1028 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 8805.84
Wooden form work & all other remaining costs ( +54.00 % on Subtotal-A ) 4755.15
Subtotal-A1: 13560.99
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 13832.21
5.05.02.03.2 Add for each additional floor up to 5th Floor cum Add +.35% with Item No 5.05.02.03.1
5.05.02.03.3 Add for each additional floor from 6th floor upto 9th floor cum Add +.63% with Item No 5.05.02.03.1
5.05.02.03.4 Add for each additional floor for 10th floor and above cum Add +.85% with Item No 5.05.02.03.1
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1029 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 8805.84
Form work & all other remaining costs ( +30.00 % on Subtotal-A ) 2641.75
Subtotal-A1: 11447.59
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 11676.54
5.05.02.04.2 Add for each additional floor up to 5th Floor cum Add +.41% with Item No 5.05.02.04.1
5.05.02.04.3 Add for each additional floor from 6th floor upto 9th floor cum Add +.75% with Item No 5.05.02.04.1
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1030 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
5.05.02.04.4 Add for each additional floor for 10th floor and above cum Add +1.00% with Item No 5.05.02.04.1
5.05.02.05 In Tee Beam, Ell Beam, Rectangular Beam etc. (exposed breadth and
width of ribs to be measured only).
Subtotal-A: 9194.64
Wooden form work & all other remaining costs ( +28.00 % on Subtotal-A ) 2574.50
Subtotal-A1: 11769.14
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 12004.52
5.05.02.05.2 Add for each additional floor up to 5th Floor cum Add +.39% with Item No 5.05.02.05.1
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1031 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
5.05.02.05.3 Add for each additional floor from 6th floor upto 9th floor cum Add +.69% with Item No 5.05.02.05.1
5.05.02.05.4 Add for each additional floor for 10th floor and above cum Add +.92% with Item No 5.05.02.05.1
5.05.02.06 In roof slab of all types, cantilever slab and drop panels (excluding floor
slab of ground floor at plinth level).
Subtotal-A: 8805.84
Wooden form work & all other remaining costs ( +33.00 % on Subtotal-A ) 2905.93
Subtotal-A1: 11711.77
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 11946.00
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1032 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
5.05.02.06.2 Add for each additional floor up to 5th Floor cum Add +.40% with Item No 5.05.02.06.1
5.05.02.06.3 Add for each additional floor from 6th floor upto 9th floor cum Add +.72% with Item No 5.05.02.06.1
5.05.02.06.4 Add for each additional floor for 10th floor and above cum Add +.96% with Item No 5.05.02.06.1
5.05.02.07 In sunshade, cornice, railing, drop wall, louver and fins (Average 62mm
to 87mm thick)
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1033 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 8781.84
Wooden form work & all other remaining costs ( +82.00 % on Subtotal-A ) 7201.11
Subtotal-A1: 15982.95
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 16302.61
5.05.02.07.2 Add for each additional floor up to 5th Floor cum Add +.95% with Item No 5.05.02.07.1
5.05.02.07.3 Add for each additional floor from 6th floor upto 9th floor cum Add +1.75% with Item No 5.05.02.07.1
5.05.02.07.4 Add for each additional floor for 10th floor and above cum Add +2.38% with Item No 5.05.02.07.1
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1034 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 8805.84
Wooden form work & all other remaining costs ( +38.00 % on Subtotal-A ) 3346.22
Subtotal-A1: 12152.06
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 12395.10
5.05.02.08.2 Add for each additional floor up to 5th Floor cum Add +.40% with Item No 5.05.02.08.1
5.05.02.08.3 Add for each additional floor from 6th floor upto 9th floor cum Add +.72% with Item No 5.05.02.08.1
5.05.02.08.4 Add for each additional floor for 10th floor and above cum Add +.96% with Item No 5.05.02.08.1
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1035 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 8805.84
Wooden form work & all other remaining costs ( +110.00 % on Subtotal-A ) 9686.42
Subtotal-A1: 18492.26
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 18862.11
5.05.02.09.2 Add for each additional floor up to 5th Floor cum Add +.26% with Item No 5.05.02.09.1
5.05.02.09.3 Add for each additional floor from 6th floor upto 9th floor cum Add +.46% with Item No 5.05.02.09.1
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1036 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
5.05.02.09.4 Add for each additional floor for 10th floor and above cum Add +.62% with Item No 5.05.02.09.1
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1037 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
5.05.03.01 In individual and continuous footing of column, raft and floor slab at cum
plinth level.
1st Class Picked Brick Chips (20mm down graded) 0.5200 m3 2940.00 1528.80
Sand (FM - 2.5) 0.2580 m3 1500.00 387.00
Portland Composite Cement (CEM-II/A-L/M/V/W 42.5N) 7.7100 bag 430.00 3315.30
Head Mason 0.0800 day 650.00 52.00
Mason 0.4200 day 550.00 231.00
Skilled Labour 0.7500 day 450.00 337.50
Ordinary Labour 2.0000 day 370.00 740.00
H.C. of Concrete Mixture Machine (Capacity 0.40/ 0.28 cum) 0.0600 day 1200.00 72.00
Hire and running charges of Concrete Vibrator 0.0600 day 400.00 24.00
Sand (FM - 1.8) 0.1720 m3 970.00 166.84
Water reducing chemical admixture : Type-A 1.2100 liter 130.00 157.30
1st Class Brick Chips (10mm down graded) 0.3400 m3 3049.00 1036.66
Subtotal-A: 8048.40
Wooden form work & all other remaining costs ( +8.00 % on Subtotal-A ) 643.87
Subtotal-A1: 8692.27
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 8866.12
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1038 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 8048.40
Wooden form work & all other remaining costs ( +19.00 % on Subtotal-A ) 1529.20
Subtotal-A1: 9577.60
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 9769.15
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1039 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 8048.40
Wooden form work & all other remaining costs ( +55.00 % on Subtotal-A ) 4426.62
Subtotal-A1: 12475.02
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 12724.52
5.05.03.03.2 Add for each additional floor upto 5th floor cum Add +.36% with Item No 5.05.03.03.1
5.05.03.03.3 Add for each additional floor from 6th floor upto 9th cum Add +.65% with Item No 5.05.03.03.1
5.05.03.03.4 Add for each additional floor for 10th floor and above. cum Add +.86% with Item No 5.05.03.03.1
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1040 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 8048.40
Wooden form work & all other remaining costs ( +33.00 % on Subtotal-A ) 2655.97
Subtotal-A1: 10704.37
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 10918.46
5.05.03.04.2 Add for each additional floor upto 5th floor cum Add +.42% with Item No 5.05.03.04.1
5.05.03.04.3 Add for each additional floor from 6th floor upto 9th cum Add +.76% with Item No 5.05.03.04.1
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1041 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
5.05.03.04.4 Add for each additional floor for 10th floor and above. cum Add +1.01% with Item No 5.05.03.04.1
5.05.03.05 In Tee Beam, Ell Beam, Rectangular Beam etc. (exposed breadth and
width of ribs to be measured only).
Subtotal-A: 8048.40
Wooden form work & all other remaining costs ( +41.00 % on Subtotal-A ) 3299.84
Subtotal-A1: 11348.24
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 11575.21
5.05.03.05.2 Add for each additional floor upto 5th floor cum Add +.38% with Item No 5.05.03.05.1
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1042 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
5.05.03.05.3 Add for each additional floor from 6th floor upto 9th cum Add +.70% with Item No 5.05.03.05.1
5.05.03.05.4 Add for each additional floor for 10th floor and above. cum Add +.93% with Item No 5.05.03.05.1
5.05.03.06 In roof slab of all types, cantilever slab and drop panels (excluding floor
slab of ground floor at plinth level).
Subtotal-A: 8048.40
Wooden form work & all other remaining costs ( +38.00 % on Subtotal-A ) 3058.39
Subtotal-A1: 11106.79
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 11328.93
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1043 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
5.05.03.06.2 Add for each additional floor upto 5th floor cum Add +.41% with Item No 5.05.03.06.1
5.05.03.06.3 Add for each additional floor from 6th floor upto 9th cum Add +.73% with Item No 5.05.03.06.1
5.05.03.06.4 Add for each additional floor for 10th floor and above. cum Add +.97% with Item No 5.05.03.06.1
5.05.03.07 In sunshade, cornice, railing, drop wall, louver and fins (Average 62mm
to 87mm thick)
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1044 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 8024.40
Wooden form work & all other remaining costs ( +83.00 % on Subtotal-A ) 6660.25
Subtotal-A1: 14684.65
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 14978.35
5.05.03.07.2 Add for each additional floor upto 5th floor cum Add +.97% with Item No 5.05.03.07.1
5.05.03.07.3 Add for each additional floor from 6th floor upto 9th cum Add +1.78% with Item No 5.05.03.07.1
5.05.03.07.4 Add for each additional floor for 10th floor and above. cum Add +2.42% with Item No 5.05.03.07.1
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1045 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 8048.40
Wooden form work & all other remaining costs ( +40.00 % on Subtotal-A ) 3219.36
Subtotal-A1: 11267.76
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 11493.12
5.05.03.08.2 Add for each additional floor upto 5th floor cum Add +.42% with Item No 5.05.03.08.1
5.05.03.08.3 Add for each additional floor from 6th floor upto 9th cum Add +.75% with Item No 5.05.03.08.1
5.05.03.08.4 Add for each additional floor for 10th floor and above. cum Add +.98% with Item No 5.05.03.08.1
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1046 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 8048.40
Wooden form work & all other remaining costs ( +115.00 % on Subtotal-A ) 9255.66
Subtotal-A1: 17304.06
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 17650.14
5.05.03.09.2 Add for each additional floor upto 5th floor cum Add +.27% with Item No 5.05.03.09.1
5.05.03.09.3 Add for each additional floor from 6th floor upto 9th cum Add +.47% with Item No 5.05.03.09.1
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1047 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
5.05.03.09.4 Add for each additional floor for 10th floor and above. cum Add +.63% with Item No 5.05.03.09.1
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1048 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
5.05.04 RCC: Mix Design 20MPa, Stone Chips (SC):, Batching Plant (BP):
Reinforced cement concrete work with minimum cement content and
maximum water cement ratio as specified by specified Laboratory
through mix design having minimum required average compressive
strength, f'cr = 26 Mpa and satisfying a specified compressive strength,
f'c = 20 Mpa at 28 days on standard cylinder as per standard practice of
Code AASHTO/ ASTM and Portland Composite Cement conforming to
BDS EN 197-1 : 2003 CEM-II 42.5N, high range water reducing
chemical admixture of complying type F under ASTM C494 which is
required to produce concrete of consistency by 12% or greater (flowing
concrete) and for higher strength and intend to retard setting time of
concrete. (Doses of admixture to be fixed by the mix design from
approved laboratory instruction by the Engineer) for smart dynamic
concrete (i.e. Low fines self compacting concrete), sand of minimum FM
2.20 and 20mm down well graded crushed stone chips broken from
boulders (Preferably stone chips from Madhyapara, Dinajpur) (LAA value
not exceeding 35) conforming to ASTM C33 or Aggregate Grading
Appendix-3 LGED Schedule of Rates or any other International
recognized envelop, in/c cost of breaking chips, screening through
proper sieves, cleaning and washing thoroughly, centering, shuttering in
position, making shuttering fully leak proof & shuttering with plain 16
BWG steel sheet fitted over 38mm thick wooden plank panels and
Standard size Bamboo Props suitably braced, placing of reinforcement in
position, mixing in mechanized a batching and mixing plant and
pumping using line pump or boom placer, maintaining allowable slump
of 100mm to 150mm casting in steel forms, compacting by Mechanical
vibrators and tapered rods and curing at least for 28 days, removing
centering-shuttering after approved specified time period i/c cost of
additional testing charges of materials and cylinders required etc all
complete as per direction of the Engineer in charge. (Excluding the cost
of reinforcements and its fabrication welding, coupling, placing, binding
etc. Additional quantity of cement to be added if required to attain the
strength at the contractor's own cost) etc. all complete as per direction
and approval of the Engineer
The Mix Design shall have to be approved by the District Quality Control
Laboratory, LGED or approved laboratory instruction by the Engineer
before execution of the work.
Note: Using Batching Plant, Transit Mixer & Concrete Pump
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1049 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
5.05.04.01 In individual and continuous footing of column, raft and floor slab at cum
plinth level.
Stone Chips (20mm down graded) [LAA≤35] 0.5200 cum 4930.00 2563.60
Sand (FM - 2.5) 0.2580 m3 1500.00 387.00
Portland Composite Cement (CEM-II/A-L/M/V/W 42.5N) 6.0600 bag 430.00 2605.80
Water-reducing high range chemical admixture : Type-F 1.9270 liter 160.00 308.32
Hire and running charges of Batching and Mixing Plant @ 20 0.0083 day 23000.00 190.90
cum/hour
H.C. of Generator (100 KVA) 0.0083 day 3500.00 29.05
H.C. of Backhoe End Loader (6 tons) 0.0083 day 6000.00 49.80
H.C. of Transit Mixer 4.0/4.5 cum capacity including fuel & 0.0200 day 10000.00 200.00
other related cost
Hire and running charges of Concrete Pump (30 & 45 cum 0.0083 day 5000.00 41.50
capacity)
Hire and running charges of Concrete Vibrator 0.0600 day 400.00 24.00
Sand (FM - 1.8) 0.1720 m3 970.00 166.84
Stone Chips (12mm down graded) [LAA≤35] 0.3400 cum 4320.00 1468.80
Head Mason 0.0800 day 650.00 52.00
Mason 0.3000 day 550.00 165.00
Skilled Labour 0.4000 day 450.00 180.00
Ordinary Labour 1.2000 day 370.00 444.00
Subtotal-A: 8876.61
Wooden form work & all other remaining costs ( +8.00 % on Subtotal-A ) 710.13
Subtotal-A1: 9586.74
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 9778.47
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1050 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Total: 11951.47
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1051 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 8876.61
Wooden form work & all other remaining costs ( +18.00 % on Subtotal-A ) 1597.79
Subtotal-A1: 10474.40
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 10683.89
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1052 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Total: 13058.09
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1053 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 8876.61
Wooden form work & all other remaining costs ( +54.00 % on Subtotal-A ) 4793.37
Subtotal-A1: 13669.98
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 13943.38
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1054 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Total: 17041.91
5.05.04.03.2 Add for each additional floor upto 5th floor cum Add +.35% with Item No 5.05.04.03.1
5.05.04.03.3 Add for each additional floor from 6th floor upto 9th cum Add +.63% with Item No 5.05.04.03.1
5.05.04.03.4 Add for each additional floor for 10th floor and above. cum Add +.85% with Item No 5.05.04.03.1
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1055 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 8876.61
Wooden form work & all other remaining costs ( +30.00 % on Subtotal-A ) 2662.98
Subtotal-A1: 11539.59
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 11770.38
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1056 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Total: 14386.03
5.05.04.04.2 Add for each additional floor upto 5th floor cum Add +.41% with Item No 5.05.04.04.1
5.05.04.04.3 Add for each additional floor from 6th floor upto 9th cum Add +.75% with Item No 5.05.04.04.1
5.05.04.04.4 Add for each additional floor for 10th floor and above. cum Add +1.00% with Item No 5.05.04.04.1
5.05.04.05 In Tee Beam, Ell Beam, Rectangular Beam etc. (exposed breadth and
width of ribs to be measured only).
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1057 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 8876.61
Wooden form work & all other remaining costs ( +38.00 % on Subtotal-A ) 3373.11
Subtotal-A1: 12249.72
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 12494.72
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1058 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Total: 15271.32
5.05.04.05.2 Add for each additional floor upto 5th floor cum Add +.38% with Item No 5.05.04.05.1
5.05.04.05.4 Add for each additional floor from 6th floor upto 9th cum Add +.69% with Item No 5.05.04.05.1
5.05.04.05.5 Add for each additional floor for 10th floor and above. cum Add +.92% with Item No 5.05.04.05.1
5.05.04.06 In roof slab of all types, cantilever slab and drop panels (excluding floor
slab of ground floor at plinth level).
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1059 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 8876.61
Wooden form work & all other remaining costs ( +33.00 % on Subtotal-A ) 2929.28
Subtotal-A1: 11805.89
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 12042.01
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1060 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Total: 14718.01
5.05.04.06.2 Add for each additional floor upto 5th floor cum Add +.40% with Item No 5.05.04.06.1
5.05.04.06.3 Add for each additional floor from 6th floor upto 9th cum Add +.72% with Item No 5.05.04.06.1
5.05.04.06.4 Add for each additional floor for 10th floor and above. cum Add +.96% with Item No 5.05.04.06.1
5.05.04.07 In sunshade, cornice, railing, drop wall, louver and fins (Average 62mm
to 87mm thick)
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1061 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 8852.61
Wooden form work & all other remaining costs ( +85.00 % on Subtotal-A ) 7524.72
Subtotal-A1: 16377.33
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 16704.88
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1062 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
5.05.04.07.2 Add for each additional floor upto 5th floor cum Add +.95% with Item No 5.05.04.07.1
5.05.04.07.3 Add for each additional floor from 6th floor upto 9th cum Add +1.75% with Item No 5.05.04.07.1
5.05.04.07.4 Add for each additional floor for 10th floor and above. cum Add +2.40% with Item No 5.05.04.07.1
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1063 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 8876.61
Wooden form work & all other remaining costs ( +40.00 % on Subtotal-A ) 3550.64
Subtotal-A1: 12427.25
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 12675.80
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1064 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Total: 15492.64
5.05.04.08.2 Add for each additional floor upto 5th floor cum Add +.40% with Item No 5.05.04.08.1
5.05.04.08.3 Add for each additional floor from 6th floor upto 9th cum Add +.72% with Item No 5.05.04.08.1
5.05.04.08.4 Add for each additional floor for 10th floor and above. cum Add +.96% with Item No 5.05.04.08.1
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1065 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 8876.61
Form work & all other remaining costs ( +112.00 % on Subtotal-A ) 9941.80
Subtotal-A1: 18818.41
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 19194.78
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1066 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Total: 23460.29
5.05.04.09.2 Add for each additional floor upto 5th floor cum Add +.26% with Item No 5.05.04.09.1
5.05.04.09.3 Add for each additional floor from 6th floor upto 9th cum Add +.46% with Item No 5.05.04.09.1
5.05.04.09.4 Add for each additional floor for 10th floor and above. cum Add +.62% with Item No 5.05.04.09.1
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1067 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1068 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
5.05.05.01 In individual and continuous footing of column, raft and floor slab at cum
plinth level
Stone Chips (20mm down graded) [LAA≤30] 0.4900 m3 5320.00 2606.80
Sand (FM - 2.5) 0.4100 m3 1500.00 615.00
Portland Composite Cement (CEM-II/A-L/M/V/W 42.5N) 7.7100 bag 430.00 3315.30
Head Mason 0.0800 day 650.00 52.00
Mason 0.4200 day 550.00 231.00
Skilled Labour 0.5000 day 450.00 225.00
Ordinary Labour 1.5000 day 370.00 555.00
H.C. of Concrete Mixture Machine (Capacity 0.40/ 0.28 cum) 0.0600 day 1200.00 72.00
Hire and running charges of Concrete Vibrator 0.0600 day 400.00 24.00
Stone Chips (12mm down graded) [LAA≤30] 0.3300 m3 4470.00 1475.10
Water reducing chemical admixture : Type-A 1.9270 liter 130.00 250.51
Subtotal-A: 9421.71
Steel form work & all other remaining costs ( +6.00 % on Subtotal-A ) 565.30
Subtotal-A1: 9987.01
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 10186.75
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1069 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 9421.71
Steel form work & all other remaining costs ( +14.00 % on Subtotal-A ) 1319.04
Subtotal-A1: 10740.75
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 10955.56
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1070 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 9421.71
Steel form work & all other remaining costs ( +50.00 % on Subtotal-A ) 4710.86
Subtotal-A1: 14132.57
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 14415.22
5.05.05.03.2 Add for each additional floor up to 5th Floor cum Add +.35% with Item No 5.05.05.03.1
5.05.05.03.3 Add for each additional floor from 6th floor upto 9th floor cum Add +.63% with Item No 5.05.05.03.1
5.05.05.03.4 Add for each additional floor for 10th floor and above cum Add +.85% with Item No 5.05.05.03.1
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1071 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 9421.71
Steel form work & all other remaining costs ( +32.00 % on Subtotal-A ) 3014.95
Subtotal-A1: 12436.66
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 12685.39
5.05.05.04.2 Add for each additional floor upto 5th floor cum Add +.41% with Item No 5.05.05.04.1
5.05.05.04.3 Add for each additional floor from 6th floor upto 9th cum Add +.75% with Item No 5.05.05.04.1
5.05.05.04.4 Add for each additional floor for 10th floor and above. cum Add +1.00% with Item No 5.05.05.04.1
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1072 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
5.05.05.05 In Tee Beam, Ell Beam, Rectangular Beam etc. (exposed breadth and
width of ribs to be measured only).
Subtotal-A: 9421.71
Steel form work & all other remaining costs ( +35.00 % on Subtotal-A ) 3297.60
Subtotal-A1: 12719.31
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 12973.69
5.05.05.05.2 Add for each additional floor upto 5th floor cum Add +.38% with Item No 5.05.05.05.1
5.05.05.05.3 Add for each additional floor from 6th floor upto 9th cum Add +.69% with Item No 5.05.05.05.1
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1073 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
5.05.05.05.4 Add for each additional floor for 10th floor and above. cum Add +.92% with Item No 5.05.05.05.1
5.05.05.06 In roof slab of all types, cantilever slab and drop panels (excluding floor
slab of ground floor at plinth level).
Subtotal-A: 9421.71
Steel form work & all other remaining costs ( +30.00 % on Subtotal-A ) 2826.51
Subtotal-A1: 12248.22
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 12493.19
5.05.05.06.2 Add for each additional floor upto 5th floor cum Add +.40% with Item No 5.05.05.06.1
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1074 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
5.05.05.06.3 Add for each additional floor from 6th floor upto 9th cum Add +.72% with Item No 5.05.05.06.1
5.05.05.06.4 Add for each additional floor for 10th floor and above. cum Add +.96% with Item No 5.05.05.06.1
5.05.05.07 In sunshade, cornice, railing, drop wall, louver and fins (Average 62mm
to 87mm thick)
Subtotal-A: 9397.71
Steel form work & all other remaining costs ( +82.00 % on Subtotal-A ) 7706.12
Subtotal-A1: 17103.83
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 17445.91
5.05.05.07.2 Add for each additional floor upto 5th floor cum Add +.95% with Item No 5.05.05.07.1
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1075 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
5.05.05.07.3 Add for each additional floor from 6th floor upto 9th cum Add +1.75% with Item No 5.05.05.07.1
5.05.05.07.4 Add for each additional floor for 10th floor and above. cum Add +2.38% with Item No 5.05.05.07.1
Subtotal-A: 9719.21
Steel form work & all other remaining costs ( +30.00 % on Subtotal-A ) 2915.76
Subtotal-A1: 12634.97
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 12887.67
5.05.05.08.2 Add for each additional floor upto 5th floor cum Add +.40% with Item No 5.05.05.08.1
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1076 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
5.05.05.08.3 Add for each additional floor from 6th floor upto 9th cum Add +.72% with Item No 5.05.05.08.1
5.05.05.08.4 Add for each additional floor for 10th floor and above. cum Add +.96% with Item No 5.05.05.08.1
Subtotal-A: 9719.21
Steel form work & all other remaining costs ( +94.00 % on Subtotal-A ) 9136.06
Subtotal-A1: 18855.27
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 19232.37
5.05.05.09.2 Add for each additional floor upto 5th floor cum Add +.26% with Item No 5.05.05.09.1
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1077 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
5.05.05.09.3 Add for each additional floor from 6th floor upto 9th cum Add +.46% with Item No 5.05.05.09.1
5.05.05.09.4 Add for each additional floor for 10th floor and above. cum Add +.62% with Item No 5.05.05.09.1
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1078 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
5.05.06 RCC: Mix Design 25MPa, Stone Chips (SC), Batching Plant (BP):
Reinforced cement concrete work with minimum cement content and
maximum water cement ratio as specified by Laboratory through mix
design having minimum required average compressive strength, f'cr =
33.5 Mpa and satisfying a specified compressive strength, f'c = 25 Mpa
at 28 days on standard cylinder as per standard practice of Code
AASHTO/ ASTM and Portland Composite Cement conforming to BDS EN
197-1 : 2003 CEM-II 42.5N, high range water reducing chemical
admixture of complying type F/G under ASTM C494 which is required to
produce concrete of consistency by 12% or greater (flowing concrete)
and for higher strength and intend to retard setting time of concrete.
(Doses of admixture to be fixed by the mix design from approved
laboratory instruction by the Engineer) for smart dynamic concrete (i.e.
Low fines self-compacting concrete), sand of minimum FM 2.50 and
20mm down well graded crushed stone chips broken from boulders
(Preferably stone chips from Madhyapara, Dinajpur) (LAA value not
exceeding 30) conforming to ASTM C33 and Aggregate Grading
Appendix-3 LGED Schedule of Rates or any other International
recognized envelop in/c cost of breaking chips, screening through
proper sieves, cleaning and washing thoroughly, centering, shuttering in
position with plain 16 BWG steel sheet fitted over 38mmx38mmx5mm
MS angle and 25mmx5mm FI bar frame and 38mm/50mm steel or GI
pipe props suitably braced and 12 BWG steel sheet plate box of proper
size where required i/c cost of nuts, bolts, J-hooks etc, placing of
reinforcement in position, mixing in mechanized a batching and mixing
plant and pumping using line pump or boom placer, maintaining
allowable slump of 100mm to 150mm casting in steel forms, compacting
by Mechanical vibrators and tapered rods and curing at least for 28 days
removing centering-shuttering after approved specified time period i/c
cost of additional testing charges of materials and cylinders required
(Excluding the cost of reinforcements and its fabrication welding,
coupling, placing, binding etc. Additional quantity of cement to be added
if required to attain the strength at the contractor's own cost) etc. all
complete as per direction and approval of the Engineer in charge.
The Mix Design shall have to be approved by the District Quality
Control Laboratory, LGED or approved laboratory instruction by the
Engineer before execution of the work.
Note: Using Batching Plant, Transit Mixer & Concrete Pump
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1079 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
5.05.06.01 In individual and continuous footing of column, raft and floor slab at cum
plinth level.
Stone Chips (20mm down graded) [LAA≤30] 0.4900 m3 5320.00 2606.80
Sand (FM - 2.5) 0.4100 m3 1500.00 615.00
Portland Composite Cement (CEM-II/A-L/M/V/W 42.5N) 7.7100 bag 430.00 3315.30
Water-reducing high range chemical admixture : Type-F 1.9270 liter 160.00 308.32
Hire and running charges of Batching and Mixing Plant @ 20 0.0083 day 23000.00 190.90
cum/hour
H.C. of Generator (100 KVA) 0.0083 day 3500.00 29.05
H.C. of Backhoe End Loader (6 tons) 0.0083 day 6000.00 49.80
H.C. of Transit Mixer 4.0/4.5 cum capacity including fuel & 0.0200 day 10000.00 200.00
other related cost
Hire and running charges of Concrete Pump (30 & 45 cum 0.0083 day 5000.00 41.50
capacity)
Hire and running charges of Concrete Vibrator 0.0600 day 400.00 24.00
Stone Chips (12mm down graded) [LAA≤30] 0.3300 m3 4470.00 1475.10
Head Mason 0.0800 day 650.00 52.00
Mason 0.3000 day 550.00 165.00
Skilled Labour 0.4000 day 450.00 180.00
Ordinary Labour 1.2000 day 370.00 444.00
Subtotal-A: 9696.77
Steel form work & all other remaining costs ( +6.00 % on Subtotal-A ) 581.81
Subtotal-A1: 10278.58
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 10484.15
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1080 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 9696.77
Steel form work & all other remaining costs ( +14.00 % on Subtotal-A ) 1357.55
Subtotal-A1: 11054.32
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 11275.40
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1081 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1082 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 9696.77
Steel form work & all other remaining costs ( +48.00 % on Subtotal-A ) 4654.45
Subtotal-A1: 14351.22
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 14638.24
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1083 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
5.05.06.03.2 Add for each additional floor up to 5th Floor cum Add +.35% with Item No 5.05.06.03.1
5.05.06.03.3 Add for each additional floor from 6th floor up to 9th floor cum Add +.63% with Item No 5.05.06.03.1
5.05.06.03.4 Add for each additional floor for 10th floor & above cum Add +.85% with Item No 5.05.06.03.1
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1084 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 9696.77
Steel form work & all other remaining costs ( +31.00 % on Subtotal-A ) 3006.00
Subtotal-A1: 12702.77
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 12956.82
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1085 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
5.05.06.04.2 Add for each additional floor up to 5th Floor cum Add +.41% with Item No 5.05.06.04.1
5.05.06.04.3 Add for each additional floor from 6th floor up to 9th floor cum Add +.75% with Item No 5.05.06.04.1
5.05.06.04.4 Add for each additional floor for 10th floor & above cum Add +1.00% with Item No 5.05.06.04.1
5.05.06.05 In Tee Beam, Ell Beam, Rectangular Beam etc. (exposed breadth and
width of ribs to be measured only).
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1086 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 9696.77
Steel form work & all other remaining costs ( +34.00 % on Subtotal-A ) 3296.90
Subtotal-A1: 12993.67
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 13253.55
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1087 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
5.05.06.05.2 Add for each additional floor up to 5th Floor cum Add +.38% with Item No 5.05.06.05.1
5.05.06.05.3 Add for each additional floor from 6th floor up to 9th floor cum Add +.69% with Item No 5.05.06.05.1
5.05.06.05.4 Add for each additional floor for 10th floor & above cum Add +.92% with Item No 5.05.06.05.1
5.05.06.06 In roof slab of all types, cantilever slab and drop panels (excluding floor
slab of ground floor at plinth level).
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1088 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 9696.77
Steel form work & all other remaining costs ( +28.00 % on Subtotal-A ) 2715.10
Subtotal-A1: 12411.87
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 12660.10
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1089 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
5.05.06.06.2 Add for each additional floor up to 5th Floor cum Add +.40% with Item No 5.05.06.06.1
5.05.06.06.3 Add for each additional floor from 6th floor up to 9th floor cum Add +.72% with Item No 5.05.06.06.1
5.05.06.06.4 Add for each additional floor for 10th floor & above cum Add +.96% with Item No 5.05.06.06.1
5.05.06.07 In sunshade, cornice, railing, drop wall, louver and fins (Average 62mm
to 87mm thick).
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1090 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 9672.77
Steel form work & all other remaining costs ( +82.00 % on Subtotal-A ) 7931.67
Subtotal-A1: 17604.44
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 17956.53
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1091 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
5.05.06.07.2 Add for each additional floor upto 5th floor cum Add +.95% with Item No 5.05.06.07.1
5.05.06.07.3 Add for each additional floor from 6th floor upto 9th cum Add +1.75% with Item No 5.05.06.07.1
5.05.06.07.4 Add for each additional floor for 10th floor and above. cum Add +2.38% with Item No 5.05.06.07.1
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1092 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 9696.77
Steel form work & all other remaining costs ( +33.00 % on Subtotal-A ) 3199.93
Subtotal-A1: 12896.70
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 13154.64
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1093 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
5.05.06.08.2 Add for each additional floor up to 5th Floor cum Add +.40% with Item No 5.05.06.08.1
5.05.06.08.3 Add for each additional floor from 6th floor up to 9th floor cum Add +.72% with Item No 5.05.06.08.1
5.05.06.08.4 Add for each additional floor for 10th floor & above cum Add +.96% with Item No 5.05.06.08.1
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1094 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 9696.77
Steel form work & all other remaining costs ( +98.00 % on Subtotal-A ) 9502.83
Subtotal-A1: 19199.60
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 19583.60
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1095 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
5.05.06.09.2 Add for each additional floor up to 5th Floor cum Add +.26% with Item No 5.05.06.09.1
5.05.06.09.3 Add for each additional floor from 6th floor up to 9th floor cum Add +.46% with Item No 5.05.06.09.1
5.05.06.09.4 Add for each additional floor for 10th floor & above cum Add +.62% with Item No 5.05.06.09.1
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1096 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1097 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
5.05.07.01 In individual and continuous footing of column, raft and floor slab at cum
plinth level
Stone Chips (20mm down graded) [LAA≤30] 0.4900 m3 5320.00 2606.80
Sand (FM - 2.5) 0.4000 m3 1500.00 600.00
Ordinary Portland Cement (CEM I, 52.5N) 8.9220 bag 455.00 4059.51
Head Mason 0.0800 day 650.00 52.00
Mason 0.4200 day 550.00 231.00
Skilled Labour 0.7500 day 450.00 337.50
Ordinary Labour 2.0000 day 370.00 740.00
H.C. of Concrete Mixture Machine (Capacity 0.40/ 0.28 cum) 0.0600 day 1200.00 72.00
Hire and running charges of Concrete Vibrator 0.0600 day 400.00 24.00
Water-reducing high range chemical admixture : Type-F 2.1500 liter 160.00 344.00
Stone Chips (12mm down graded) [LAA≤30] 0.3300 m3 4470.00 1475.10
Subtotal-A: 10541.91
Steel form work & all other remaining costs ( +5.00 % on Subtotal-A ) 527.10
Subtotal-A1: 11069.01
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 11290.39
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1098 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 10810.11
Steel form work & all other remaining costs ( +13.00 % on Subtotal-A ) 1405.31
Subtotal-A1: 12215.42
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 12459.73
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1099 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 10541.91
Steel form work & all other remaining costs ( +46.00 % on Subtotal-A ) 4849.28
Subtotal-A1: 15391.19
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 15699.01
5.05.07.03.2 Add for each additional floor up to 5th Floor cum Add +.35% with Item No 5.05.07.03.1
5.05.07.03.3 Add for each additional floor from 6th floor upto 9th floor cum Add +.63% with Item No 5.05.07.03.1
5.05.07.03.4 Add for each additional floor for 10th floor and above cum Add +.85% with Item No 5.05.07.03.1
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1100 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 10541.91
Steel form work & all other remaining costs ( +30.00 % on Subtotal-A ) 3162.57
Subtotal-A1: 13704.48
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 13978.57
5.05.07.04.2 Add for each additional floor up to 5th Floor cum Add +.41% with Item No 5.05.07.04.1
5.05.07.04.3 Add for each additional floor from 6th floor upto 9th floor cum Add +.75% with Item No 5.05.07.04.1
5.05.07.04.4 Add for each additional floor for 10th floor and above cum Add +1.00% with Item No 5.05.07.04.1
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1101 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
5.05.07.05 In Tee Beam, Ell Beam, Rectangular Beam etc. (exposed breadth and
width of ribs to be measured only).
Subtotal-A: 10541.91
Steel form work & all other remaining costs ( +34.00 % on Subtotal-A ) 3584.25
Subtotal-A1: 14126.16
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 14408.68
5.05.07.05.2 Add for each additional floor up to 5th Floor cum Add +.38% with Item No 5.05.07.05.1
5.05.07.05.3 Add for each additional floor from 6th floor upto 9th floor cum Add +.69% with Item No 5.05.07.05.1
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1102 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
5.05.07.05.4 Add for each additional floor for 10th floor and above cum Add +.92% with Item No 5.05.07.05.1
5.05.07.06 In roof slab of all types, cantilever slab and drop panels (excluding floor
slab of ground floor at plinth level).
Subtotal-A: 10558.41
Steel form work & all other remaining costs ( +28.00 % on Subtotal-A ) 2956.35
Subtotal-A1: 13514.76
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 13785.06
5.05.07.06.2 Add for each additional floor up to 5th Floor cum Add +.40% with Item No 5.05.07.06.1
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1103 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
5.05.07.06.3 Add for each additional floor from 6th floor upto 9th floor cum Add +.72% with Item No 5.05.07.06.1
5.05.07.06.4 Add for each additional floor for 10th floor and above cum Add +.96% with Item No 5.05.07.06.1
5.05.07.07 In sunshade, cornice, railing, drop wall, louver and fins (Average 62mm
to 87mm thick)
Subtotal-A: 10517.91
Steel form work & all other remaining costs ( +81.00 % on Subtotal-A ) 8519.51
Subtotal-A1: 19037.42
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 19418.17
5.05.07.07.2 Add for each additional floor up to 5th Floor cum Add +.95% with Item No 5.05.07.07.1
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1104 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
5.05.07.07.3 Add for each additional floor from 6th floor upto 9th floor cum Add +1.75% with Item No 5.05.07.07.1
5.05.07.07.4 Add for each additional floor for 10th floor and above cum Add +2.38% with Item No 5.05.07.07.1
Subtotal-A: 10541.91
Steel form work & all other remaining costs ( +31.00 % on Subtotal-A ) 3267.99
Subtotal-A1: 13809.90
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 14086.10
5.05.07.08.2 Add for each additional floor up to 5th Floor cum Add +.40% with Item No 5.05.07.08.1
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1105 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
5.05.07.08.3 Add for each additional floor from 6th floor upto 9th floor cum Add +.72% with Item No 5.05.07.08.1
5.05.07.08.4 Add for each additional floor for 10th floor and above cum Add +.96% with Item No 5.05.07.08.1
Subtotal-A: 10541.91
Steel form work & all other remaining costs ( +96.00 % on Subtotal-A ) 10120.23
Subtotal-A1: 20662.14
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 21075.39
5.05.07.09.2 Add for each additional floor up to 5th Floor cum Add +.26% with Item No 5.05.07.09.1
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1106 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
5.05.07.09.3 Add for each additional floor from 6th floor upto 9th floor cum Add +.46% with Item No 5.05.07.09.1
5.05.07.09.4 Add for each additional floor for 10th floor and above cum Add +.62% with Item No 5.05.07.09.1
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1107 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
5.05.08 RCC-30MPa, Stone Chips (SC), Batching Plant (BP): Reinforced cement
concrete work with minimum cement content and maximum water
cement ratio as specified by Quality Control Laboratory, LGED or
approved laboratory instruction by the Engineer before execution of the
work. Having minimum required average compressive strength, f'cr =
38.5 Mpa and satisfying a specified compressive strength, f'c = 30 Mpa
at 28 days on standard cylinder as per standard practice of Code
AASHTO/ ASTM and cement conforming to BDS EN 197-1 : 2003 CEM-I
52.5N / ASTM C150 Type-1, high range water reducing admixture of
complying type F/ G under ASTM C494 (Doses of admixture to be fixed
by the mix design from approved laboratory instruction by the Engineer)
for smart dynamic concrete (i.e. Low fines self compacting concrete),
sand of minimum FM 2.50 and 20mm down well graded crushed stone
chips broken from boulders (Preferably stone chips from Madhyapara,
Dinajpur, LAA value not exceeding 30) conforming to ASTM C33 and
Aggregate Grading Appendix-3 LGED Schedule of Rates or any other
International recognized envelop in/c cost of breaking chips, screening
through proper sieves, cleaning and washing thoroughly, centering,
shuttering in position with plain 16 BWG steel sheet fitted over
38mmx38mmx5mm MS angle and 25mmx5mm FI bar frame and
38mm/50mm steel or GI pipe props suitably braced and 12 BWG steel
sheet plate box of proper size where required i/c cost of nuts, bolts, J-
hooks etc, placing of reinforcement in position, mixing in mechanized a
batching and mixing plant and pumping using line pump or boom
placer, maintaining allowable slump of 100mm to150mm casting in steel
forms, compacting by Mechanical vibrators and tapered rods and curing
at least for 28 days removing centering-shuttering after approved
specified time period i/c cost of additional testing charges of materials
and cylinders required (Excluding the cost of reinforcements and its
fabrication welding, coupling, placing, binding etc. Additional quantity of
cement to be added if required to attain the strength at the contractor's
own cost) etc. all complete as per approval of the Engineer in charge.
The Mix Design shall have to approved by the Central Quality Control
Laboratory (CQCL), LGED or approved laboratory instruction by the
Engineer before execution of the work.
Note: Using Batching Plant, Transit Mixer & Concrete Pump
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1108 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
5.05.08.01 In individual and continuous footing of column, raft and floor slab at cum
plinth level
Ordinary Portland Cement (CEM I, 52.5N) 8.9220 bag 455.00 4059.51
Stone Chips (20mm down graded) [LAA≤30] 0.4900 m3 5320.00 2606.80
Stone Chips (12mm down graded) [LAA≤30] 0.3300 m3 4470.00 1475.10
Sand (FM - 2.5) 0.4000 m3 1500.00 600.00
Water-reducing high range chemical admixture : Type-F 2.1500 liter 160.00 344.00
Head Mason 0.0800 day 650.00 52.00
Mason 0.5000 day 550.00 275.00
Skilled Labour 1.0000 day 450.00 450.00
Ordinary Labour 1.5000 day 370.00 555.00
Hire and running charges of Batching and Mixing Plant @ 20 0.0083 day 23000.00 190.90
cum/hour
H.C. of Generator (100 KVA) 0.0083 day 3500.00 29.05
H.C. of Backhoe End Loader (6 tons) 0.0083 day 6000.00 49.80
H.C. of Transit Mixer 4.0/4.5 cum capacity including fuel & 0.0200 day 10000.00 200.00
other related cost
Hire and running charges of Concrete Pump (30 & 45 cum 0.0083 day 5000.00 41.50
capacity)
Hire and running charges of Concrete Vibrator 0.0600 day 400.00 24.00
Diesel 1.0730 liter 68.00 72.96
Subtotal-A: 11025.62
Steel Formwork/ shuttering, prop with necessary ( +6.00 % on Subtotal-A ) 661.54
supports etc.
Subtotal-A1: 11687.16
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 11920.90
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1109 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
IT 4% of Total 582.80
Total: 14569.99
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1110 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 10952.66
Steel Formwork/ shuttering, prop with necessary ( +14.00 % on Subtotal-A ) 1533.37
supports etc.
Subtotal-A1: 12486.03
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 12735.75
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1111 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Total: 15565.92
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1112 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 10952.66
Steel Formwork/ shuttering, prop with necessary ( +48.00 % on Subtotal-A ) 5257.28
supports etc.
Subtotal-A1: 16209.94
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 16534.14
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1113 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Total: 20208.39
5.05.08.03.02 Add for each additional floor up to 5th Floor cum Add +.35% with Item No 5.05.08.03.01
5.05.08.03.03 Add for each additional floor from 6th floor upto 9th floor cum Add +.63% with Item No 5.05.08.03.01
5.05.08.03.04 Add for each additional floor for 10th floor and above cum Add +.85% with Item No 5.05.08.03.01
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1114 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 10952.66
Steel Formwork/ shuttering, prop with necessary ( +31.00 % on Subtotal-A ) 3395.32
supports etc.
Subtotal-A1: 14347.98
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 14634.94
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1115 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Total: 17887.15
5.05.08.04.02 Add for each additional floor up to 5th Floor cum Add +.41% with Item No 5.05.08.04.01
5.05.08.04.03 Add for each additional floor from 6th floor upto 9th floor cum Add +.75% with Item No 5.05.08.04.01
5.05.08.04.04 Add for each additional floor for 10th floor and above cum Add +1.00% with Item No 5.05.08.04.01
5.05.08.05 In Tee Beam, Ell Beam, Rectangular Beam etc. (exposed breadth and
width of ribs to be measured only).
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1116 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 10952.66
Steel Formwork/ shuttering, prop with necessary ( +34.00 % on Subtotal-A ) 3723.90
supports etc.
Subtotal-A1: 14676.56
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 14970.10
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1117 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Total: 18296.78
5.05.08.05.02 Add for each additional floor up to 5th Floor cum Add +.38% with Item No 5.05.08.05.01
5.05.08.05.03 Add for each additional floor from 6th floor upto 9th floor cum Add +.69% with Item No 5.05.08.05.01
5.05.08.05.04 Add for each additional floor for 10th floor and above cum Add +.92% with Item No 5.05.08.05.01
5.05.08.06 In roof slab of all types, cantilever slab and drop panels (excluding floor
slab of ground floor at plinth level).
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1118 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 10952.66
Steel Formwork/ shuttering, prop with necessary ( +28.00 % on Subtotal-A ) 3066.74
supports etc.
Subtotal-A1: 14019.40
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 14299.79
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1119 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Total: 17477.52
5.05.08.06.02 Add for each additional floor up to 5th Floor cum Add +.40% with Item No 5.05.08.06.01
5.05.08.06.03 Add for each additional floor from 6th floor upto 9th floor cum Add +.72% with Item No 5.05.08.06.01
5.05.08.06.04 Add for each additional floor for 10th floor and above cum Add +.96% with Item No 5.05.08.06.01
5.05.08.07 In sunshade, cornice, railing, drop wall, louver and fins (Average 62mm
to 87mm thick)
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1120 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 10952.66
Steel Formwork/ shuttering, prop with necessary ( +82.00 % on Subtotal-A ) 8981.18
supports etc.
Subtotal-A1: 19933.84
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 20332.52
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1121 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Total: 24850.86
5.05.08.07.02 Add for each additional floor up to 5th Floor cum Add +.95% with Item No 5.05.08.07.01
5.05.08.07.03 Add for each additional floor from 6th floor upto 9th floor cum Add +1.75% with Item No 5.05.08.07.01
5.05.08.07.04 Add for each additional floor for 10th floor and above cum Add +2.38% with Item No 5.05.08.07.01
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1122 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 10952.66
Steel Formwork/ shuttering, prop with necessary ( +33.00 % on Subtotal-A ) 3614.38
supports etc.
Subtotal-A1: 14567.04
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 14858.38
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1123 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Total: 18160.24
5.05.08.08.02 Add for each additional floor up to 5th Floor cum Add +.40% with Item No 5.05.08.08.01
5.05.08.08.03 Add for each additional floor from 6th floor upto 9th floor cum Add +.72% with Item No 5.05.08.08.01
5.05.08.08.04 Add for each additional floor for 10th floor and above cum Add +.96% with Item No 5.05.08.08.01
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1124 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 10952.66
Steel Formwork/ shuttering, prop with necessary ( +98.00 % on Subtotal-A ) 10733.61
supports etc.
Subtotal-A1: 21686.27
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 22119.99
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1125 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Total: 27035.55
5.05.08.09.02 Add for each additional floor up to 5th Floor cum Add +.26% with Item No 5.05.08.09.01
5.05.08.09.03 Add for each additional floor from 6th floor upto 9th floor cum Add +.46% with Item No 5.05.08.09.01
5.05.08.09.04 Add for each additional floor for 10th floor and above cum Add +.62% with Item No 5.05.08.09.01
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1126 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
5.05.09 RCC-35 Mpa, Stone Chips (SC), Batching Plant (BP): Reinforced cement
concrete work with minimum cement content and maximum water
cement ratio as specified by CQCL, LGED having minimum required
average compressive strength, f'cr = 45 Mpa and satisfying a specified
compressive strength, f'c = 35 Mpa at 28 days on standard cylinder as
per standard practice of Code AASHTO/ ASTM and cement conforming
to BDS EN 197-1 : 2003 CEM-I 52.5N / ASTM C150 Type-1, high range
water reducing admixture of complying type F/ G under ASTM C494
(Doses of admixture to be fixed by the mix design from approved
laboratory instruction by the Engineer) for smart dynamic concrete (i.e.
Low fines self compacting concrete), sand of minimum FM 2.80 and
20mm down well graded crushed stone chips broken from boulders
(LAA value not exceeding 25) conforming to ASTM C33 and Aggregate
Grading Appendix-3 LGED Schedule of Rates or any other International
recognized envelop, in/c cost of breaking chips, screening through
proper sieves, cleaning and washing thoroughly, centering, shuttering in
position with plain 16 BWG steel sheet fitted over 38mmx38mmx5mm
MS angle and 25mmx5mm FI bar frame and 38mm/50mm steel or GI
pipe props suitably braced and 12 BWG steel sheet plate box of proper
size where required, i/c cost of nuts, bolts, J-hooks etc, placing of
reinforcement in position, mixing in mechanized a batching and mixing
plant and pumping using line pump or boom placer, maintaining
allowable slump of 100mm to 150mm casting in steel forms, compacting
by Mechanical vibrators and tapered rods and curing at least for 28
days, removing centering-shuttering after approved specified time
period, i/c cost of additional testing charges of materials and cylinders
required (Excluding the cost of reinforcements and its fabrication
welding, coupling, placing, binding etc. Additional quantity of cement to
be added if required to attain the strength at the contractor's own cost),
etc. all complete as per approval of the Engineer in charge.
The Mix Design shall have to approved by the Central Quality Control
Laboratory (CQCL), LGED or approved laboratory instruction by the
Engineer before execution of the work.
Note: Using Batching Plant, Transit Mixer & Concrete Pump
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1127 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
5.05.09.01 In individual and continuous footing of column, raft and floor slab at cum
plinth level
Ordinary Portland Cement (CEM I, 52.5N) 9.0000 bag 455.00 4095.00
Stone Chips (20mm down graded) [LAA≤25] 0.4900 cum 5730.00 2807.70
Stone Chips (12mm down graded) [LAA≤25] 0.3300 cum 4640.00 1531.20
Sand (FM - 2.8) 0.4100 m3 1602.00 656.82
Water-reducing high range chemical admixture : Type-F 2.2500 liter 160.00 360.00
Head Mason 0.0800 day 650.00 52.00
Mason 0.7500 day 550.00 412.50
Skilled Labour 1.5000 day 450.00 675.00
Ordinary Labour 2.5000 day 370.00 925.00
Hire and running charges of Batching and Mixing Plant @ 20 0.0083 day 23000.00 190.90
cum/hour
H.C. of Generator (100 KVA) 0.0083 day 3500.00 29.05
H.C. of Backhoe End Loader (6 tons) 0.0083 day 6000.00 49.80
H.C. of Transit Mixer 4.0/4.5 cum capacity including fuel & 0.0200 day 10000.00 200.00
other related cost
Hire and running charges of Concrete Pump (30 & 45 cum 0.0083 day 5000.00 41.50
capacity)
Hire and running charges of Concrete Vibrator 0.0600 day 400.00 24.00
Subtotal-A: 12050.47
Steel Formwork/ shuttering, prop with necessary ( +6.00 % on Subtotal-A ) 723.03
supports etc.
Subtotal-A1: 12773.50
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 13028.97
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1128 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Total: 15924.29
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1129 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Subtotal-A: 12050.47
Steel Formwork/ shuttering, prop with necessary ( +14.00 % on Subtotal-A ) 1687.07
supports etc.
Subtotal-A1: 13737.54
Subtotal-B: Lab Test Fees, Incidental charges & Overhead ( Add 2% on Subtotal-A/ A1) : 14012.29
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1130 of 2994
Unit Cost Analysis for Schedule of Rates
Schedule of Rates, LGED, July 2017
Detailed Analysis
Item
Code Brief Description of Item Unit Sub-Item Quantity Unit Rate Amount
1 2 3 4 5 6 7 8
Total: 17126.13
Note : Rates of all items should be inclusive of all supply and carriage. Page: 1131 of 2994
Unit Cost Analysis for Schedule of Rates