Académique Documents
Professionnel Documents
Culture Documents
Description
The CDP-0 / CDP-G range of dynamic power controllers shifts the operating point of the
solar field, enabling the inverter generation level to be regulated in accordance with the user's
consumption.
One of the main features of this series is that it can measure all the energy flows of the
installation:
—— Energy consumed by the user
—— Energy generated by the inverter
—— Energy consumed or injected into the mains
—— Energy from an auxiliary generating source.
The inverter power must be configured in these devices, and the CDP is capable, via a
communication channel, of adapting generation to energy consumption with the aim of
achieving zero injection to the electrical network. The CDP generates a database with all
information on the power and energy of every measurement point, including the regulation
percentage of the inverter, and also allows on-line monitoring via the internet. The CDP
has a built-in screen with two 20-digit lines, which displays all the electrical variables
measured by the unit. It also includes six indicator lights which allow the communication
status and alarm status to be checked in real time.
Application
The CDP is the ideal unit for managing photovoltaic installations for self-consumption without
mains injection.
Technical features
Power supply circuit Rated voltage 230 Vac
Tolerance 80%...115%
Frequency 50...60 Hz
Consumption 6 VA
Rated voltage 12 Vdc
Consumption 6W
Voltage measurement Measurement margin 10...300 Vac
circuit Frequency 50...60 Hz
Current measurement Nominal current .../250 mA
circuit Maximum current .../300 mA
Accuracy class Power 0.5%
Energy 1.0%
Relay outputs Number 4
Type Potential-free
Maximum operating current 6A
Communications User interface Ethernet
Communication with the inverter RS-232, RS-485, RS-422
Communication with other units RS-485
1
Energías Renovables
References
Type Code Description
CDP-0 E51001 Dynamic power controller, zero injection
CDP-G E52001 Dynamic power controller, zero injection and demand management
Dimensions
105 5 65
44
90 35,5 45 65
CURRENT MEASURE
User
User L1
Grid L2
Inverter L3
Common Common
Single-phase Three-phase
connection connection
DC Power
Supply 12 Vd.c.