Académique Documents
Professionnel Documents
Culture Documents
14 13:13 Seite 53
PINTSCH BUBENZER
is certified according to
DIN EN ISO 9001:2008
H15
KRANBAU-UK-Innen-Teil-02-0514_pintsch bubenzer 20.05.14 13:13 Seite 54
Description RWB 7
Wheel brake spring applied Operation of several wheel brakes by one hydraulic
power unit, including hand pump for emergency
Apply time: Continuously adjustable 3-15 seconds
release
Wheel brake hydraulically released
Enclosures of stainless steel for power
Limit switch release control, proximity type unit and terminal box
Connection by support
Space heater, oil level and oil temperature switch
Static or dynamic applications for the power unit
As storm brake on all rail mounted equipment, Brakes of this range are tested both mechanically
e. g. cranes, stackers, reclaimers etc. and hydraulically and are set to nominal force. This
Direct holding of idle wheels. Particularly where setting can only be changed by the manufacturer.
a rail clamp or a rail brake cannot be used Operating conditions other than described in this
brochure require the manufacturer´s approval and
may influence the function of the brake and its
components.
H16
KRANBAU-UK-Innen-Teil-02-0514_pintsch bubenzer 20.05.14 13:13 Seite 55
Rev. 04-12
Hydraulic connection
for Ø12 mm pipe
Rev. 05-08
Type example
PINTSCH BUBENZER
scope of supply
bar 2
P 130 P
bar
M
3 P2 R
P1 S
P
C
All dimensions in mm
Alterations reserved without notice
H18
KRANBAU-UK-Innen-Teil-02-0514_pintsch bubenzer 20.05.14 13:13 Seite 57
Piping Sample
Wheel Brake RWB 7
Rev. 05-08
to further
Wheel Brakes
Bleeder
Pipe
Pipe
Wheel brake
RWB 7
Hose
Distributor
N
Attention: For operating two or more brake units with one power unit please note, that the power unit should
be installed between the brakes in the centre to achieve almost equal pipe length on both sides (equal apply
time of brakes).
H19