Académique Documents
Professionnel Documents
Culture Documents
Air Curtains
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD
standard.
Grease fittings on bottom block and at drum bearing make relubrication a
simple task.
Trolley sideplates feature heavy duty bumpers to protect wheels and act as safety lugs.
Fully machined, cast iron wheels equipped with sealed, lifetime lubricated precision ball bearings for long life.
Hand chain operated geared trolley available.
Motorized Trolley:
Dual articulating trolleys are adjustable for 6 to 18-inch Trolley sideplates feature heavy duty bumpers to
American Standard I-Beams, with recommended protect wheels and to act as safety lugs.
4-foot minimum radius. Available to fit wide-flange and patented track
Standard trolley speed is 35 FPM. Optional speeds beams.
are 18, 24, 50, 75, 10 and 150 FPM. Two speed Built to rugged specifications for long efficient
trolley motors available. service.
Fully machined and heat-treated cast iron wheels Trolley brake available.
equipped with sealed, lifetime lubricated precision
ball bearings for long life.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD
1) Highly Rigid Tubular Steel Frame — For precision 11) Standard Overload Clutch — Protects against
alignment of components. damage caused by excessive overloads and reverse
2) Easy Access to All Electrical Connections phasing.
3) Dual Articulating Trolley Lugs — Provide excellent 12) Fully Enclosed Bottom Block — Guards against
curved beam traveling characteristics. rope jamming and sheave damage.
4) Threaded Power Cord Entry — Weather Tight 13) Ergonomic Push Button Control — Impact and
5) Steel Machined Groove Drum — Provides chemical/corrosive atmosphere resistant. Our push
smoother winding and longer rope life. button station fits operator’s hand for thumb or
two-handed operation. 24 Volt Control standard
6) Precision Machined Alloy Steel Gears —
for operator safety. 115 Volt Control available
Lubricated by oil bath for longer, quieter operation.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD
7) First Stage Helical Gearing — Quietest operation upon request. NEMA 3R (weather resistant)
available standard.
8) Multiple Disc Motor Brake — Direct acting to 14) Internal Strain Relief — Provides support for
stop load when push button is released and power push button station
off.
9) Adjustable Upper and Lower Limit Switches —
For regulated load travel.
10) Mechanical Load Brake — Multiple disc type
for load lowering control and additional reliability.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD
Lifting Rope Net
Figure Speed Motor Dia. Weight Mounting
Model No. No. Lift (FPM) (HP) (in.) (lbs.) Position B C D E F G
WRMT-6014 3 22 14 3 5/16 568 Parallel 54 13/16 7 7/16 5 8 1/16 1 11/16 38 1/2
WRMT-10016* 4 20 16 5 3/8 1060 Cross 27 11/16 9 1/4 - - - -
*Call for Special Lead-times on WRMT-10016-20 Hoists.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD
All Electric Wire Rope Hoists (WR Models) are designed and built per ANSI B30.16 and our interpretation of the
National Electrical Code. As such, they include a motor brake, mechanical load brake, overload limiting clutch, upper
and lower limit switches (with an additional paddle type limit switch on all cross mounted WR 1’s & WR 3’s and all
WR 5’s), reduced voltage push button control, NEMA 3R weather resistant construction and 15 Ft. of power cord
for lug, plain trolley and hand geared trolley models. Standard U.S. 3-phase, 60 Hertz voltages of 200-208, 230/460
and 575 are available at no extra charge. Optional voltage of 115/230 single phase is available for units up to 1 H.P.
Motorized trolleys available beginning with standard speeds of 35 and 75 FPM.
Voltage Options:
Single-Speed Voltages Two-Speed Voltages
115/230 Volt - 1 Phase - 60 Hertz 208 Volt - 3 Phase - 60 Hertz
208 Volt - 3 Phase - 60 Hertz 230 Volt - 3 Phase - 60 Hertz
230/460 Volt - 3 Phase - 60 Hertz 460 Volt - 3 Phase - 60 Hertz
575 Volt - 3 Phase - 60 Hertz 575 Volt - 3 Phase - 60 Hertz
PRICING
Single Reeved Models - WR Models
WR WRT WRGT WRMT
Lift Rope A Ship. Lug A Ship Plain Ship. Geared Ship. Motor
Model Lift Spd. Mtr. Dia. No. Dim. Wt. Only Dim. Wt. Trolley Wt. Trolley Wt. Trolley
No. (Ft.) (FPM) H.P. (In.) Wheels (In.) (lbs.) Price (In.) (lbs.) Price (lbs.) Price (lbs.) Price
3 ton
WR6010 22 10 2 5/16 6 27 1/16 446 $7,517 28 7/8 522 $8,338 554 $8,822 557 $10,282
WR6014 22 14 3 5/16 6 27 1/16 455 $7,679 28 7/8 531 $8,615 563 $8,963 566 $10,514
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD
WR6010 35 10 2 5/16 6 27 1/16 474 $8,204 28 7/8 550 $8,981 597 $9,804 585 $11,104
WR6014 35 14 3 5/16 6 27 1/16 483 $8,338 28 7/8 559 $9,254 606 $10,053 594 $11,423
For 5 Ton - See double reeved section below.
For 2 to 3 Ton, 2-speed trolley option - Add $1022 to single speed trolley price.
Note: If NEMA 4X station, or 6 or 8-button station is required, add for 2-speed buttons (per pair)
2 Speed Hoist Adder $1097
For 3 & 5 Ton, 2-speed trolley option - Add $1,158 to single speed trolley price.
Note: If NEMA 4X station, or 6 or 8-button station is required, add for 2-speed buttons (per pair)
2 Speed hoist Adder $1,516.
* Add to single speed hoist price.
† Four wheels are provided on WRT model. Six wheels are provided on WRGT and WRMT models.
Note: Dual tread wheels 4” tread diameter.
Request CSA Compliant Hoist at the time of order. WRMT models require mainline contactors and 6-button, push-button station.
Double-reeved 3 & 5 Ton WR units require CSA Field Certification.
Accessories - WR Models
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD
Push Button Stations - For trolley, crane and start-stop control. Standard directions are marked by nameplates;
for special legends, consult us. All stations below are Nema 4X weather resistant with interchangeable elements. Price
Specify functions required.
2 Button Station, Single Speed $148.16
4 Button Station, Single Speed, or Momentary Start-Stop $283.88
6 Button Station, Single Speed, or Momentary Start-Stop $477.28
8 Button Station, Single Speed, or Momentary Start-Stop $663.90
Substitute Two Speed - Per Pair (required on Nema 4X stations only) $177.57
Substitute Maintained Start-Stop - Per Pair $309.89
External Chain Strain Relief on P.B. Cord
6 Ft. Pendant Drop $63.34
Special Pendant Cord Lengths - Per Ft. over 6 Ft., Add to $44.40 Price $1.70
Kellems Cord Grip - Each $113.10
Outrigger Arm, Rigid (Trolley Suspension only) 3 Ft. $349.48
Retractable Coiled Power Cord - 25 Ft.-retracts to 4 Ft. ( 3 or 4 conductor # 14) $456.92
Collector Mounting Arm - 20 In. long, Per Arm $152.69
Insul-8 Collectors & Mountings (30 Amp.)
Two Collectors, One Arm (single phase) $476.15
Three Collectors, One Arm (three phase) $590.38
Two Arm Arrangement - Adder for Extra Arm $152.69
Special Motor Voltage
200-208 Volt, 3 Phase, 60 Hz N/C
575 Volt, 3 Phase, 60 Hz N/C
220/380 Volt, 3 Phase 50 Hz P.O.A.*
Additional Options
MT Trolley Brake $728.36
Bronze Wheels For CT & MT Trolley (per wheel) $142.51
Rubber Bumpers for CT & MT Trolley (Qty. 4) $430.91
Auxillary Contacts (N.O. or N.C.) - Each Contactor $72.38
Trolley Limit Switch - Lever Type, customer to supply Actuating Bar $660.50
Special Color Paint - Air dry enamel: white, black, red, yellow, orange, green, silver $390.20
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD
Epoxy Paint $1,163.80
Magnaflux Inspection of Hook $136.85
Magnaflux Inspection of Hook per ASTM A275 Spec's with Documentation $439.96
115 Volt Control Circuit N/C
Fused & Grounded Transformer (Secondary) - Per Transformer $22.62
Motor Thermostat - Per Motor (Standard on WR-5 Models) $92.74
Controls for Tandem Operation - includes 3-Position Selector Switch P.O.A.*
Stainless Steel Limit Switch Shaft Standard
Zinc plated Hook $102.92
Bullard Swivel Gate Hooks
For WR Models up to and including WR2016 (Bottom Hook) $214.89
For WR2028 to WR4021 (Bottom Hook) $540.62
For WR6010 to WR10016 (Bottom Hook) $790.57
Shur-Loc Hooks®
For 3 Ton WR Models (Bottom Hook) $417.34
Note: Some accessories may require CSA Field Certification - Consult us
* Price on Application
Special P.B. Drops, Power Cords & Hand Chain Drops Price
Price per extra foot of P.B. Drop (Base Unit = 4 Ft. less than lift) $7.01
Price per extra foot of Power Cord (Base Unit = 15 Ft., except MT = Optional) $7.01
Price per extra foot of Hand Chain Drop for Geared Trolley (Base Unit = 2 Ft. less than lift) $16.29
CT & MT Trolleys for Special Beams (includes required wheel & yoke 4-Wheel 6-Wheel 8-Wheel
assemblies) Trolley Price Trolley Price Trolley Price
Patented Track ( 3 1/4"-4") $205.84 $309.89 $412.82
American Standard Shapes (up to 7" Flange) N/C if requested at time of order
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD
Wide Flange Shape (up to 7" Flange) N/C if requested at time of order
Wide Flange Shape (7" to 9" Flange) N/C if requested at time of order
2" Pat. Track (2 Ton & Under Models Only) ** $913.85 $972.66 N/A
Flange Over 9" P.O.A.* P.O.A.* P.O.A.*
Optional Trolley Speeds
(All available with 3:1 ratio two speed motor - 3 phase only)
18 FPM $208.10 $417.34
24 FPM $208.10 $417.34
35 FPM Standard Standard
50 FPM $208.10 $417.34
75 FPM N/C N/C
100 FPM $208.10 $417.34
150 FPM $208.10 $417.34
Auxiliary Electrical Controls
Note: The addition of any one or more of the auxiliary controls in this section requires the
addition of one Auxiliary Control Mounting Charge (includes special panel plates, auxiliary
enclosures and additional wiring as required). Auxiliary control enclosures may increase
clearance requirements. When clearance dimensions are critical, request a certified print.
Auxiliary Control Mounting Charge - required with all items this section $259.00
Mainline Contactor - Must order P.B. Station with space $137.98
Thermal Overload Relay - per motor $318.94
Bridge or Tractor Contactor (to 3 H.P.) - must order P.B. Station with space for bridge buttons
? Single Speed $274.83
? Two Speed $436.57
Motor Fuses - per motor $286.14
Trolley Ballast Resistors (3 phase only) $806.40
Solid-state Soft-Start for Trolley Motor ? Single Speed $1,221.48
(requires 115 Volt Control Circuit) ? Two Speed $1,409
Inching Controls - must order P.B. Station with space $436.57
Horn (100 dB) or Bell $560.98
Variable Frequency Inverter Speed Control
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD
Note: Must also order NEMA 4 P.B. Station. Consult us. P.O.A.*
Remote Control System - Control Chief System 2000 or Radio Note: Mainline Contactor and
additional Reversing Contactors not included - see Auxiliary Electrical Controls
(a) Control Chief 2000 (Infared Control) P.O.A.*
(b) Radio Control P.O.A.*
(c) Any system above with one or two of the motions being two speed P.O.A.*
(d) Pendant/Remote Transfer Switch P.O.A.*
Deductions From Specially Priced Units
Push Button Stations & Cord
(a) Single Speed - Two Button $89.35
(b) Two Speed - Two Button $171.91
(c) Single Speed Hoist & Single Speed Trolley - Four Button $128.93
(d) Single Speed Hoist & Two Speed Trolley - Four Button $195.66
(e) Two Speed Hoist & Single Speed Trolley - Four Button $195.66
(f) Two Speed Hoist & Two Speed Trolley - Four Button $242.03
(g) Power Cord $50.90
Note: Some accessories may require CSA Field Certification - Consult us
* Price on Application
Electric Wire Rope Hoists, Wire Rope Hoist, Electric Hoist, Trolleys, Hoists, Winch Hoist, Winches, Electric Powered Winches,
Monorail Hoist, Hoist Winches, and Coffing from your source for material handling equipment.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD