Académique Documents
Professionnel Documents
Culture Documents
Version: V3.00.01
ZTE CORPORATION
NO. 55, Hi-tech Road South, ShenZhen, P.R.China
Postcode: 518057
Tel: +86-755-26771900
Fax: +86-755-26770801
URL: http://ensupport.zte.com.cn
E-mail: support@zte.com.cn
LEGAL INFORMATION
Copyright © 2011 ZTE CORPORATION.
The contents of this document are protected by copyright laws and international treaties. Any reproduction or
distribution of this document or any portion of this document, in any form by any means, without the prior written
consent of ZTE CORPORATION is prohibited. Additionally, the contents of this document are protected by
contractual confidentiality obligations.
All company, brand and product names are trade or service marks, or registered trade or service marks, of ZTE
CORPORATION or of their respective owners.
This document is provided “as is”, and all express, implied, or statutory warranties, representations or conditions
are disclaimed, including without limitation any implied warranty of merchantability, fitness for a particular purpose,
title or non-infringement. ZTE CORPORATION and its licensors shall not be liable for damages resulting from the
use of or reliance on the information contained herein.
ZTE CORPORATION or its licensors may have current or pending intellectual property rights or applications
covering the subject matter of this document. Except as expressly provided in any written license between ZTE
CORPORATION and its licensee, the user of this document shall not acquire any license to the subject matter
herein.
ZTE CORPORATION reserves the right to upgrade or make technical change to this product without further notice.
Users may visit ZTE technical support website http://ensupport.zte.com.cn to inquire related information.
The ultimate right to interpret this product resides in ZTE CORPORATION.
Revision History
I
4.3.4 H2XF8D ................................................................................................ 4-35
4.3.5 S1XF12A ............................................................................................... 4-37
4.3.6 E1GF24A .............................................................................................. 4-40
4.4 Board Usage Restriction ................................................................................... 4-45
Figures............................................................................................................. I
Tables ............................................................................................................ III
Glossary .......................................................................................................VII
II
About This Manual
Purpose
Thanks for using ZXR10 switches of ZTE Corporation!
This manual is ZXR10 8900E (V3.00.01) Series Core Switch Hardware Description. It is
applicable to V3.00.01 of ZXR10 8902E/8905E/8908E/8912E core switch.
The commands supported by ZXR10 8900&8900E (V3.00.01) series switch are based on
ROSng platform.
Intended Audience
This manual is intended for the following engineers:
l Network planning engineer
l Device installation engineer
l Commissioning engineer
l Maintenance engineer
Chapter Summary
Chapter 3 ZXR10 8900E Chassis Describes the hardware structure, power system and cooling
system.
Chapter 4 ZXR10 8900E Board Describes the board classification, interface number rule, MCU
and line interface board.
I
II
Chapter 1
Safety Instruction
Table of Contents
Safety Introduction .....................................................................................................1-1
Safety Signs ...............................................................................................................1-1
Warning!
Indicates the matters needing close attention. If this is ignored, serious injury accidents
may happen or devices may be damaged.
Caution!
Indicates the matters needing attention during configuration.
1-1
Note:
Indicates the description, hint, tip and so on for configuration operations.
1-2
With the rapid development of network, the type of service on the data network grows.
It places greater demands on quality of service and security of network devices. ZXR10
8900E provides abundant policies and resources on QoS and ACL. It guarantees service
qualities and system securities.
As the important switching node on backbone/convergence layer, ZXR10 8900E has the
hot backup function of the power module and the control and switching module. It also has
the real-time system monitoring function. ZXR10 8900E is applicable to build the network
with high reliability and large capacity.
ZXR10 8900E has the following features:
l High system capacity
l Carrier-class reliability
l Full-service bearer capacity
l Full wire-speed forwarding and filtering capability
l Various network protocols
l Open architecture that supports high upgrade performance
l Environment-friendly and energy saving
l Simple and unified intelligent network management
2-1
2.2 Functions
The ZXR10 8900E Series Switch implements full wire-speed layer2/layer3 switching
function, supports multiple protocols and provides the following functions.
l Physical interface
à Supporting port rate configuration, duplex mode, and self-adaptive system.
à Supporting port mirroring.
à Supporting broadcast storm suppression.
à Supporting line diagnosis analysis test.
à Supporting port loop detection.
à Supporting UDLD.
l VLAN
à Supporting port-based VLAN, protocol-based VLAN and subnet-based VLAN.
à Supporting IEEE 802.1Q. The maximum number of VLANs is 4094.
à Supporting PVLAN.
à Supporting VLAN double-layer tag.
à Supporting Super VLAN.
à Supporting Selective VLAN.
l Layer 2 protocol
à Supporting STP, RSTP and MSTP.
à Supporting static Trunk and LACP.
à Supporting IGMP Snooping.
à Supporting ZESR and ZESS.
l Routing protocol
à Supporting unicast protocols including static routing, RIP v1/v2, OSPF, IS-IS, and
BGP.
à Supporting multicast protocols including IGMP v1/v2, PIM-SM, and MSDP.
l ACL
à Supporting standard ACL, extended ACL, layer 2 ACL, hybrid ACL, standard IPv6
ACL, extended IPv6 ACL and user-defined ACL.
à Supporting ACL time segment restriction.
à Supporting port linkage ACL rule.
à Supporting CPU attack protection.
l QoS
à Supporting 802.1p priority.
2-2
à Supporting DOT1X.
à Supporting DHCP Relay and DHCP Server.
l Reliability
à Supporting VRRP.
2-3
2-4
3-1
3-2
3-3
3-4
3-5
3-6
3-7
3-8
3-9
According to the function realized by the hardware circuit, ZXR10 8900E mainly includes
the following components:
l Large-capacity and high-speed backplane
The system applies the latest passive high-speed and large-capacity backplane. It
applies 10G cables to connect line cards and MCS , which guarantees the sufficient
switching capacity required by the system running and reserves the enough bandwidth
capacity for the later upgrade. At present, the maximum backplane capacity is 3072
Gbps. It can be upgraded to 7.5 Tbps or higher value in the future.
l MCS
The MCS is the important integrated board with 1:1 redundancy. Each MCS includes
one high-capability CPU, large-capacity storage spaces, one module of switching
and communication between boards, one monitoring module and one clock module.
In addition, each MCS of 8912E/8908E/8905E includes one large-capacity switching
fabric that applies multiple planes independent design. It guarantees the switching
capability and capacity expansion capability in the future. The MCS of 8902E has no
switching fabrics. Line cards realize the back-to-back connection through high-speed
backplane. When ZXR10 8900E is working properly, two MCSs hold the active
connection. At present, the maximum switching capacity of double MCSs is 2048
Gbps.
l Service line card
Service line cards directly process packets, sending the packet to the detailed port
of destination service line cards according to the processing result. Each service line
card has its own forwarding table. Forwarding policies are locally completed, which
guarantees the wire-speed switching ability. Service line cards are various. They
can support the clock synchronization and the intellectual monitoring. According to
demands, the following service line cards can be provided:
Gigabit Ethernet service card
10G Ethernet service card
40G Ethernet service card
l Power supply module
ZXR10 8900E applies new power design. It can support the remote control function
that the main control system takes on the power. The main control system can monitor
the power through RS485, which realizes the intellectual monitoring on temperature,
overvoltage/under-voltage, power-down alarm and current limit.
3-10
Item Description
ZXR10 8912E:610mm×600mm×1050mm
ZXR10 8908E:610mm×600mm×870mm
Dimensions (H×W×D)
ZXR10 8905E:610mm×600mm×735mm
ZXR10 8902E:635mm×635mm×340mm
ZXR10 8912E:86kg
Weight(with single ZXR10 8908E:65kg
shelf configuration) ZXR10 8905E:51kg
ZXR10 8902E:24kg
ZXR10 8912E:≤105kg
Weight(Full ZXR10 8908E:≤90kg
Configuration) ZXR10 8905E:≤75kg
ZXR10 8902E:≤28kg
3-11
Item Description
ZXR10 8912E: 96
The number of 40GE ZXR10 8908E: 64
interfaces ZXR10 8905E: 40
ZXR10 8902E: 16
Attribute Description
3-12
Attribute Description
3-13
Attribute Description
3-14
One channel of DC power modules can support the complete work. Two channels of power
supplies can realize the 1+1 redundancy backup, that is, if one channel of power module
has faults, the other will not be affected and provide the normal power supply and the
system will work properly.
The rear panel view of ZXR10 8912E/8908E/8905E DC power supply module is shown in
Figure 3-13.
3-15
Figure 3-13 Rear Panel View of ZXR10 8912E/8908E/8905E DC Power Supply Module
Parameter Description
The rear panel view of ZXR10 8912E/8908E/8905E AC power supply module is shown in
Figure 3-14.
3-16
Figure 3-14 Rear Panel View of ZXR10 8912E/8908E/8905E AC Power Supply Module
Parameter Description
3-17
Figure 3-15 Front Panel View of ZXR10 8902E DC Power Supply Module
Parameter Description
Figure 3-16 Front Panel View of ZXR10 8902E AC Power Supply Module
Technical parameters of ZXR10 8902E AC power module are shown in Table 3-8.
3-18
Parameter Description
The ZXR10 8900E Series Switch corresponds four fan plug-in boxes:
l ZXR10 8912E fan plug-in box
l ZXR10 8908E fan plug-in box
l ZXR10 8908E fan plug-in box
l ZXR10 8902E fan plug-in box
The fan plug-in box of ZXR10 8912E is shown in Figure 3-17.
3-19
There are two indicators on the panel of the fan plug-in box of ZXR10 8912E/8908E/8905E.
The functions are listed in Table 3-9.
RUN (green) Off: The fan frame power supply works abnormally.
On: The fan frame power supply works normally.
3-20
There are no indicators on the panel of fan plug-in box of ZXR10 8902E. The fan state is
indicated by the FAN indicator on the MCS panel of 8902E.
The fan in the fan subrack of ZXR10 8902E has two specifications including three big fans
and three small fans. The others apply big fans. The related parameters of a big fan and
a small fan are described in Table 3-11.
The ZXR10 8900E Series Switch can automatically or manually adjust the speed according
to the temperature state on each MCS and each service board.
The dust screen changeover diagram of ZXR10 8902E is shown in Figure 3-21.
3-21
The dust screen changeover diagram of ZXR10 8905E is shown in Figure 3-22.
The dust screen changeover diagram of ZXR10 8908E is shown in Figure 3-23.
3-22
The dust screen changeover diagram of ZXR10 8912E is shown in Figure 3-24.
3-23
3-24
4-1
4.2 MCS
MCS is the core of the ZXR10 8900E Series Switch. It implements the functions of the
control module and the switching module. Both the system software information and the
configuration information are saved in the FLASH of MCS.
4.2.1 8912EMCS1D
Function
The 8912EMCS1D board is an enhanced MCS. It has master/slave switchover function
and 1+1 redundancy configuration. In addition, the 8912EMCS1D board supports the
synchronous Ethernet, IEEE 1588v2 and GPS time synchronization.
The main functions of the 8912EMCS1D board are as follows:
l Provides powerful switching capacity
The single main control provides the interface board with up to 1024Gbps switching
capacity.
l Provides gigabit out-of-band communication function
It is used for the communication between multiple line card CPUs.
l Provides EPLD online upgrade function
The EPLD of the 8912EMCS1D board can realize the online upgrade function through
the JTAG interface simulation.
l Provides JTAG test function
The 8912EMCS1D board can realize the single board JTAG test by connecting to the
main chip of single board through the daisy chain.
l Provides intelligent detection function
The board designs the real-time monitoring circuit such as temperature, voltage and
power consumption. CPU can make the real-time monitoring through IIC bus.
l Provides IPMC management control unit
It connects to the IPMC management control unit of each line interface board through
bus to form the intelligent platform management system.
l Supports the synchronous Ethernet, IEEE 1588v2 and GPS time synchronization.
l Supports the system synchronization clock through GPS and BITS.
Panel
The panel of 8912EMCS1D is shown in Figure 4-1.
4-2
Ports
There are a Console port, a IPMC port, a 10/100/1000Base-T Ethernet port, a SD card
slot, a PPS&TOD OUT port, a PPS&TOD IN port, a BITS IN port and a BITS OUT port on
the 8912EMCS1D board.
l Console port
A Console port is used to connect the background management terminal which
performs operations and maintenances on ZXR10 8912E with Super Terminal. A
Console port is a RJ45 socket. It is connected to the COM port of the background
management terminal through a serial cable. One end of the serial cable connecting
ZXR10 8912E is an RJ45 connector and the other end of the serial cable connecting
the background management terminal is a DB9 female connector. The line order is
described in Table 4-2.
3 T232TX 2 computerRX
5 GND 5 GND
6 T232RX 3 computerTX
l IPMC port
An IPMC port is used to connect the background management terminal which
performs operations and maintenances on the intelligent platform management
system in the internal of ZXR10 8912E with Super Terminal. An IPMC port is a RJ45
socket. It is connected to the COM port of the background management terminal
through a serial cable. One end of the serial cable connecting ZXR10 8912E is an
RJ45 connector and the other end of the serial cable connecting the background
management terminal is a DB9 female connector. The line order is described in
Table 4-3.
3 T232TX 2 computerRX
5 GND 5 GND
6 T232RX 3 computerTX
4-3
Caution!
When the SD card is reading data, the ACT indicator is flashing. At this time, do not
pull out SD card, otherwise data in SD card will be destroyed.
l PPS&TOD OUT
GPS Pulse Per Second (PPS) and TOD output. It applies RJ45 socket and RS422
level. The signal definitions are described in Table 4-4.
3 1PPS_OUT_N 6 1PPS_OUT_P
7 TOD_OUT_N 8 TOD_OUT_P
l PPS&TOD IN
GPS Pulse Per Second(PPS) and TOD input. It applies RJ45 socket and RS422 level.
The signal definitions are described in Table 4-5.
3 1PPS_IN_N 6 1PPS_IN_P
7 TOD_IN_N 8 TOD_IN_P
l BITS IN
BITS signal input. It applies a BNC connector and connects the BITS network through
a 75Ω coaxial cable.
l BITS OUT
BITS signal output. It applies a BNC connector and connects the BITS network
through a 75Ω coaxial cable.
4-4
Indicators
There are 37 indicators in the panel of the 8912EMCS1D board. Functions of these
indicators are described in Table 4-6.
Indicator Description
LINK (Green) On: 10/100/1000Base-T Ethernet interface links have been created.
Off: 10/100/1000Base-T Ethernet interfaces have no connections with
other interfaces.
Buttons
There are three buttons on the panel of the 8912EMCS1D board. Functions are described
in Table 4-7.
4-5
Technical Parameters
The technical parameters of the 8912EMCS1D board are described in Table 4-8.
Parameter Description
Board power consumption The single board static power consumption is 56.5 w. The power
consumption is 84.8 w after normal starting.
Maxi- 4GB
mum ca-
pacity
SD card One
slot
PPS&T- One
OD OUT
4-6
Parameter Description
PPS&T- One
OD IN
BITS IN One
BITS One
OUT
4.2.2 8908EMCS1D
Function
The 8908EMCS1D board is an enhanced MCS. It has master/slave switchover function
and 1+1 redundancy configuration. In addition, the 8908EMCS1D board supports the
synchronous Ethernet, IEEE 1588v2 and GPS time synchronization.
The main functions of the 8908EMCS1D board are as follows:
l Provides powerful switching capacity
The single main control provides the interface board with up to 1024Gbps switching
capacity.
l Provides gigabit out-of-band communication function
It is used for the communication between various line card CPUs.
l Provides EPLD online upgrade function
The EPLD of the 8908EMCS1D board can realize the online upgrade function through
the JTAG interface simulation.
l Provides JTAG test function
The 8908EMCS1D board can realize the single board JTAG test by connecting to the
main chip of single board through the daisy chain.
l Provides intelligent detection function
The board designs the real-time monitoring circuit such as temperature, voltage and
power consumption. CPU can make the real-time monitoring through IIC bus.
l Provides IPMC management control unit
It connects to the IPMC management control unit of each line interface board through
bus to form the intelligent platform management system.
l Supports the synchronous Ethernet, IEEE 1588v2 and GPS time synchronization.
l Supports the system synchronization clock through GPS and BITS.
Panel
The panel of 8908EMCS1D is shown in Figure 4-2.
4-7
Ports
There are a Console port, a IPMC port, a 10/100/1000Base-T Ethernet port, a SD card
slot, a PPS&TOD OUT port, a PPS&TOD IN port, a BITS IN port and a BITS OUT port on
the 8908EMCS1D board.
l Console port
A Console port is used to connect the background management terminal which
performs operations and maintenances on ZXR10 8908E with Super Terminal. A
Console port is a RJ45 socket. It is connected to the COM port of the background
management terminal through a serial cable. One end of the serial cable connecting
ZXR10 8908E is an RJ45 connector and the other end of the serial cable connecting
the background management terminal is a DB9 female connector. The line order is
described in Table 4-9.
3 T232TX 2 computerRX
5 GND 5 GND
6 T232RX 3 computerTX
l IPMC port
An IPMC port is used to connect the background management terminal which
performs operations and maintenances on the intelligent platform management
system in the internal of ZXR10 8908E with Super Terminal. An IPMC port is a RJ45
socket. It is connected to the COM port of the background management terminal
through a serial cable. One end of the serial cable connecting ZXR10 8908E is an
RJ45 connector and the other end of the serial cable connecting the background
management terminal is a DB9 female connector. The line order is described in
Table 4-10.
3 T232TX 2 computerRX
5 GND 5 GND
6 T232RX 3 computerTX
4-8
Caution!
When the SD card is reading data, the ACT indicator is flashing. At this time, do not
pull out SD card, otherwise data in SD card will be destroyed.
l PPS&TOD OUT
GPS Pulse Per Second (PPS) and TOD output. It applies RJ45 socket and RS422
level. The signal definitions are described in Table 4-11.
3 1PPS_OUT_N 6 1PPS_OUT_P
7 TOD_OUT_N 8 TOD_OUT_P
l PPS&TOD IN
GPS Pulse Per Second(PPS) and TOD input. It applies RJ45 socket and RS422 level.
The signal definitions are described in Table 4-12.
3 1PPS_IN_N 6 1PPS_IN_P
7 TOD_IN_N 8 TOD_IN_P
l BITS IN
BITS signal input. It applies a BNC connector and connects the BITS network through
a 75Ω coaxial cable.
l BITS OUT
BITS signal output. It applies a BNC connector and connects the BITS network
through a 75Ω coaxial cable.
4-9
Indicators
There are 29 indicators in the panel of 8908EMCS1D board. Functions of these indicators
are described in Table 4-13.
Indicator Description
LINK (Green) On: 10/100/1000Base-T Ethernet interface links have been created.
Off: 10/100/1000Base-T Ethernet interfaces have no connections with
other interfaces.
Buttons
There are three buttons on the panel of the 8908EMCS1D board. Functions are described
in Table 4-14.
4-10
Technical Parameters
The technical parameters of the 8908EMCS1D board are described in Table 4-15.
Parameter Description
Board power consumption The single board static power consumption is 56.5 w. The power
consumption is 84.8 w after normal starting.
CPU Capacity Single core processor. The main frequency is 1.33 GHz.
Maxi- 4GB
mum ca-
pacity
SD card One
slot
PPS&T- One
OD OUT
4-11
Parameter Description
PPS&T- One
OD IN
BITS IN One
BITS One
OUT
4.2.3 8905EMCS1D
Function
The 8905EMCS1D board is an enhanced MCS. It has master/slave switchover function
and 1+1 redundancy configuration. In addition, the 8905EMCS1D board supports the
synchronous Ethernet, IEEE 1588v2 and GPS time synchronization.
The main functions of the 8905EMCS1D board are as follows:
l Provides powerful switching capacity
The single main control provides the interface board with up to 640Gbps switching
capacity.
l Provides gigabit out-of-band communication function
It is used for the communication between various line card CPUs.
l Provides EPLD online upgrade function
The EPLD of the 8905EMCS1D board can realize the online upgrade function through
the JTAG interface simulation.
l Provides JTAG test function
The 8905EMCS1D board can realize the single board JTAG test by connecting to the
main chip of single board through the daisy chain.
l Provides intelligent detection function
The board designs the real-time monitoring circuit such as temperature, voltage and
power consumption. CPU can make the real-time monitoring through IIC bus.
l Provides IPMC management control unit
It connects to the IPMC management control unit of each line interface board through
bus to form the intelligent platform management system.
l Supports the synchronous Ethernet, IEEE 1588v2 and GPS time synchronization.
l Supports the system synchronization clock through GPS and BITS.
Panel
The panel of 8905EMCS1D is shown in Figure 4-3.
4-12
Ports
There are a Console port, a IPMC port, a 10/100/1000Base-T Ethernet port, a SD card
slot, a PPS&TOD OUT port, a PPS&TOD IN port, a BITS IN port and a BITS OUT port on
the 8905EMCS1D board.
l Console port
A Console port is used to connect the background management terminal which
performs operations and maintenances on ZXR10 8905E with Super Terminal. A
Console port is a RJ45 socket. It is connected to the COM port of the background
management terminal through a serial cable. One end of the serial cable connecting
ZXR10 8905E is an RJ45 connector and the other end of the serial cable connecting
the background management terminal is a DB9 female connector. The line order is
described in Table 4-16.
3 T232TX 2 computerRX
5 GND 5 GND
6 T232RX 3 computerTX
l IPMC port
An IPMC port is used to connect the background management terminal which
performs operations and maintenances on the intelligent platform management
system in the internal of ZXR10 8905E with Super Terminal. An IPMC port is a RJ45
socket. It is connected to the COM port of the background management terminal
through a serial cable. One end of the serial cable connecting ZXR10 8905E is an
RJ45 connector and the other end of the serial cable connecting the background
management terminal is a DB9 female connector. The line order is described in
Table 4-17.
3 T232TX 2 computerRX
5 GND 5 GND
6 T232RX 3 computerTX
4-13
Caution!
When the SD card is reading data, the ACT indicator is flashing. At this time, do not
pull out SD card, otherwise data in SD card will be destroyed.
l PPS&TOD OUT
GPS Pulse Per Second (PPS) and TOD output. It applies RJ45 socket and RS422
level. The signal definitions are described in Table 4-18.
3 1PPS_OUT_N 6 1PPS_OUT_P
7 TOD_OUT_N 8 TOD_OUT_P
l PPS&TOD IN
GPS Pulse Per Second(PPS) and TOD input. It applies RJ45 socket and RS422 level.
The signal definitions are described in Table 4-19.
3 1PPS_IN_N 6 1PPS_IN_P
7 TOD_IN_N 8 TOD_IN_P
l BITS IN
BITS signal input. It applies a BNC connector and connects the BITS network through
a 75Ω coaxial cable.
l BITS OUT
BITS signal output. It applies a BNC connector and connects the BITS network
through a 75Ω coaxial cable.
4-14
Indicators
There are 23 indicators in the panel of 8905EMCS1D board. Functions of these indicators
are described in Table 4-20.
Indicator Description
LINK (Green) On: 10/100/1000Base-T Ethernet interface links have been created.
Off: 10/100/1000Base-T Ethernet interfaces have no connections with
other interfaces.
Buttons
There are three buttons on the panel of the 8905EMCS1D board. Functions are described
in Table 4-21.
4-15
Technical Parameters
The technical parameters of the 8905EMCS1D board are described in Table 4-22.
Parameter Description
Board power consumption The single board static power consumption is 56.5 w. The power
consumption is 84.8 w after normal starting.
CPU Capacity Single core processor. The main frequency is 1.33 GHz.
Maxi- 4GB
mum ca-
pacity
SD card One
slot
PPS&T- One
OD OUT
PPS&T- One
OD IN
BITS IN One
4-16
Parameter Description
BITS One
OUT
4.2.4 8902EMCS1D
Function
The 8902EMCS1D board is an enhanced MCS. It has master/slave switchover function
and 1+1 redundancy configuration. In addition, the 8902EMCS1D board supports the
synchronous Ethernet, IEEE 1588v2 and GPS time synchronization.
The main functions of the 8902EMCS1D board are as follows:
l Provides gigabit out-of-band communication function
It is used for the communication between various line card CPUs.
l Provides EPLD online upgrade function
The EPLD of the 8902EMCS1D board can realize the online upgrade function through
the JTAG interface simulation.
l Provides JTAG test function
The 8902EMCS1D board can realize the single board JTAG test by connecting to the
main chip of single board through the daisy chain.
l Provides intelligent detection function
The board designs the real-time monitoring circuit such as temperature, voltage and
power consumption. CPU can make the real-time monitoring through IIC bus.
l Provides IPMC management control unit
It connects to the IPMC management control unit of each line interface board through
bus to form the intelligent platform management system.
l Supports the synchronous Ethernet, IEEE 1588v2 and GPS time synchronization.
l Supports the system synchronization clock through GPS and BITS.
Panel
The panel of 8902EMCS1D is shown in Figure 4-4.
4-17
Ports
There are a Console port, a IPMC port, a 10/100/1000Base-T Ethernet port, a SD card
slot, a PPS&TOD OUT port, a PPS&TOD IN port, a BITS IN port and a BITS OUT port on
the 8902EMCS1D board.
l Console port
A Console port is used to connect the background management terminal which
performs operations and maintenances on ZXR10 8902E with Super Terminal. A
Console port is a RJ45 socket. It is connected to the COM port of the background
management terminal through a serial cable. One end of the serial cable connecting
ZXR10 8902E is an RJ45 connector and the other end of the serial cable connecting
the background management terminal is a DB9 female connector. The line order is
described in Table 4-23.
3 T232TX 2 computerRX
5 GND 5 GND
6 T232RX 3 computerTX
l IPMC port
An IPMC port is used to connect the background management terminal which
performs operations and maintenances on the intelligent platform management
system in the internal of ZXR10 8902E with Super Terminal. An IPMC port is a RJ45
socket. It is connected to the COM port of the background management terminal
through a serial cable. One end of the serial cable connecting ZXR10 8902E is an
RJ45 connector and the other end of the serial cable connecting the background
management terminal is a DB9 female connector. The line order is described in
Table 4-24.
3 T232TX 2 computerRX
5 GND 5 GND
6 T232RX 3 computerTX
4-18
Caution!
When the SD card is reading data, the ACT indicator is flashing. At this time, do not
pull out SD card, otherwise data in SD card will be destroyed.
l PPS&TOD OUT
GPS Pulse Per Second (PPS) and TOD output. It applies RJ45 socket and RS422
level. The signal definitions are described in Table 4-25.
3 1PPS_OUT_N 6 1PPS_OUT_P
7 TOD_OUT_N 8 TOD_OUT_P
l PPS&TOD IN
GPS Pulse Per Second(PPS) and TOD input. It applies RJ45 socket and RS422 level.
The signal definitions are described in Table 4-26.
3 1PPS_IN_N 6 1PPS_IN_P
7 TOD_IN_N 8 TOD_IN_P
l BITS IN
BITS signal input. It applies a BNC connector and connects the BITS network through
a 75Ω coaxial cable.
l BITS OUT
BITS signal output. It applies a BNC connector and connects the BITS network
through a 75Ω coaxial cable.
Indicators
There are 15 indicators in the panel of 8902EMCS1D board. Functions of these indicators
are described in Table 4-27.
4-19
Indicator Description
Buttons
There are three buttons on the panel of the 8902EMCS1D board. Functions are described
in Table 4-28.
Technical Parameters
The technical parameters of the 8902EMCS1D board are described in Table 4-29.
4-20
Parameter Description
Board power consumption The single board static power consumption is 28.6 w. The power
consumption is 31 w after normal starting.
CPU Capacity Single core processor. The main frequency is 1.33 GHz.
Maxi- 4GB
mum ca-
pacity
SD card One
slot
PPS&T- One
OD OUT
PPS&T- One
OD IN
BITS IN One
BITS One
OUT
4-21
The 48-port gigabit optical interface board supports MPLS wire-speed forwarding and
large-size entry.
l Provides gigabit out-of-band communication function
It is used for the communication between line card CPU and main control, for example,
the initialization information of CPU is downloaded.
l Provides EPLD online upgrade function
The EPLD of H2GF48D board can realize online upgrade function through JTAG
interface simulation.
l Provides JTAG test function
H2GF48D board can realize a single board JTAG test by connecting to the main chip
of a single board through daisy chains.
l Provides intelligent detection function
The board designs real-time monitoring circuit such as temperature, voltage and
power consumption. CPU can make the real-time monitoring through IIC bus.
l Provides IPMC management control unit
The IPMC management control unit of each line interface board connects with each
other through bus to form an intelligent platform management system.
It realizes the electrical sequence control function of each working power through
power management chips.
Panel
The panel of H2GF48D is shown in Figure 4-5.
4-22
Interfaces
The optical module used by H2GF48D interfaces is the hot-swap SFP optical module. The
port type is not identified on the panel. The interface characteristics are described in Table
4-30.
4-23
4-24
1.25G single fiber bi-direction SFP LC connector, single-mode optical fiber, with the wavelength
single-mode optical receive/transmit 1310 nm TX/1490 nm RX, the maximum transmission
module (SFP-S10K-D-S) distance is 10 km, digital diagnosis type
Transmission power range: –9 dBm–3 dBm, receiving
sensitivity: ≤–19.5 dBm, overload power –3 dBm
1.25G single fiber bi-direction SFP LC connector, single-mode optical fiber, with the wavelength
single-mode optical receive/transmit of 1310 nm TX/1490 nm RX, the maximum transmission
module (SFP-S40K-D-S) distance is 40 km, digital diagnosis type
Transmission power range: –3 dBm–3 dBm, receiving
sensitivity: ≤–19.5 dBm, overload power –3 dBm
4-25
155M SFP single fiber bi-direction LC connector, single-mode optical fiber, with the wavelength
receive/transmit optical module of 1310 nm TX/1550 nm RX, the maximum transmission
(SFP-S15K-D-S) distance is 15 km, digital diagnosis type
Transmission power range: –14 dBm– –8 dBm, receiving
sensitivity: ≤–31 dBm, overload power –8 dBm
155M SFP single fiber bi-direction LC connector, single-mode optical fiber, with the wavelength
receive/transmit optical module of 1310 nm TX/1550 nm RX, the maximum transmission
(SFP-S40K-D-S) distance is 40 km, digital diagnosis type
Transmission power range: –4 dBm–0 dBm, receiving
sensitivity: ≤–34 dBm, overload power –3 dBm
Attribute Description
Connector type LC
Indicator
There are 48 indicators on the front panel of H2GF48D board. Each interface corresponds
to one indicator. Functions of these indicators are described in Table 4-32.
4-26
Technical Parameters
The technical parameters of H2GF48D board are described in Table 4-33.
Parameter Description
Board power consumption The single board static power consumption is 40.2 w. The power
consumption is 51.7 w after normal starting without optical module.
Maxi- 4GB
mum ca-
pacity
4.3.2 H2GF24D
Function
H2GF24D board is a 24-port MPLS gigabit optical interface board. It provides 24-port
gigabit wire-speed access function for users. This board is applicable for all kinds of 8900E
switches and supports MPLS gigabit optical interface wire-speed access, synchronous
Ethernet, IEEE 1588v2 and OAM function.
The main functions of H2GF24D board are as follows:
l Provides powerful switching capacity
The 24-port gigabit optical interface board supports MPLS wire-speed forwarding and
large-size entry.
l Provides gigabit out-of-band communication function
It is used for the communication between line card CPU and main control, for example,
the initialization information of CPU is downloaded.
l Provides EPLD online upgrading function
The EPLD of H2GF24D board can realize online upgrading function through JTAG
interface simulation.
4-27
Panel
The panel of H2GF24D is shown in Figure 4-6.
Interfaces
The optical module used by H2GF24D interface is hot-swap SFP optical module. The
port type is not identified on the panel. The corresponding relationships between interface
types and characteristics are described in Table 4-34.
4-28
4-29
4-30
1.25G single fiber bi-direction SFP LC connector, single-mode optical fiber, with the wavelength
single-mode optical receive/transmit 1310 nm TX/1490 nm RX, the maximum transmission
module (SFP-S10K-D-S) distance is 10 km, digital diagnosis type
Transmission power range: –9 dBm–3 dBm, receiving
sensitivity: ≤–19.5 dBm, overload power –3 dBm
1.25G single fiber bi-direction SFP LC connector, single-mode optical fiber, with the wavelength
single-mode optical receive/transmit of 1310 nm TX/1490 nm RX, the maximum transmission
module (SFP-S40K-D-S) distance is 40 km, digital diagnosis type
Transmission power range: –3 dBm–3 dBm, receiving
sensitivity: ≤–19.5 dBm, overload power –3 dBm
155M SFP single fiber bi-direction LC connector, single-mode optical fiber, with the wavelength
receive/transmit optical module of 1310 nm TX/1550 nm RX, the maximum transmission
(SFP-S15K-D-S) distance is 15 km, digital diagnosis type
Transmission power range: –14 dBm––8 dBm, receiving
sensitivity: ≤–31 dBm, overload power –8 dBm
155M SFP single fiber bi-direction LC connector, single-mode optical fiber, with the wavelength
receive/transmit optical module of 1310 nm TX/1550 nm RX, the maximum transmission
(SFP-S40K-D-S) distance is 40 km, digital diagnosis type
Transmission power range: –4 dBm–0 dBm, receiving
sensitivity: ≤–34 dBm, overload power –3 dBm
4-31
Attribute Description
Connector type LC
Indicator
There are 24 indicators on the front panel of H2GF24D board. Each interface corresponds
to one indicator. Functions of these indicators are described in Table 4-36.
Technical Parameters
The technical parameters of H2GF24D board are described in Table 4-37.
Parameter Description
Board power consumption The single board static power consumption is 40.2 w. The power
consumption is 51.7 w after normal starting without optical module.
Maxi- 4GB
mum ca-
pacity
4-32
4.3.3 H2GT48D
Function
H2GT48D board is a 48-port MPLS gigabit electrical interface board. It provides
1000BASE-T service for users. This board is applicable for all kinds of 8900E switches
and supports MPLS gigabit electrical interface wire-speed access, synchronous Ethernet,
IEEE 1588v2 and OAM function.
The main functions of H2GT48D board are as follows:
l Provides powerful switching capacity
The 48-port gigabit electrical interface board supports MPLS wire-speed forwarding
and large-size entry.
l Provides gigabit out-of-band communication function
It is used for the communication between line card CPU and main control, for example,
the initialization information of CPU is downloaded.
l Provides EPLD online upgrade function
The EPLD of H2GT48D board can realize online upgrade function through JTAG
interface simulation.
l Provides JTAG test function
H2GT48D board can realize a single board JTAG test by connecting to the main chip
of a single board through daisy chains.
l Provides intelligent detection function
The board designs real-time monitoring circuit such as temperature, voltage and
power consumption. CPU can make the real-time monitoring through IIC bus.
l Provides IPMC management control unit
The IPMC management control unit of each line interface board connects with each
other through bus to form an intelligent platform management system.
l Supports synchronous Ethernet and IEEE 1588v2
l Provides power management function
It realizes the electrical sequence control function of each working power through
power management chips.
Panel
The panel of H2GT48D is shown in Figure 4-7.
4-33
Interfaces
All 48 interfaces of H2GT48D board support RJ45 electrical interfaces. The interface
characteristics are described in Table 4-38.
Indicators
There are 48 indicators on the front panel of H2GT48D board. Each interface corresponds
to one indicator. Functions of these indicators are described in Table 4-39.
Technical Parameters
The technical parameters of H2GT48D board are described in Table 4-40.
Parameter Description
Board power consumption The single board static power consumption is 49.5 w. The power
consumption is 58.5 w after normal starting without optical module.
Maxi- 4GB
mum ca-
pacity
4-34
4.3.4 H2XF8D
Function
H2XF8D board is a 8-port 10 gigabit optical interface board. It can realize 8-port 10 gigabit
wire-speed access function. This board is only applicable for 8912E/8908E/8905E (For
8912E, it is only applicable for the first four slots. ) and not applicable for 8902E. It supports
the synchronous Ethernet, IEEE 1588v2 and OAM function.
The main functions of H2XF8D board are as follows:
l Provides powerful switching capacity
The 8-port 10 gigabit SFP+ optical interface board supports full wire-speed forwarding,
MPLS wire-speed forwarding and large-size entry.
l Provides gigabit out-of-band communication function
It is used for the communication between line card CPU and the main control, for
example, the initialization information of CPU is downloaded.
l Provides EPLD online upgrading function
The EPLD of H2XF8D board can realize online upgrading function through JTAG
interface simulation.
l Provides JTAG test function
H2XF8D board can realize a single board JTAG test by connecting to the main chip
of a single board through daisy chains.
l Provides intelligent detection function
The board designs real-time monitoring circuit such as temperature, voltage and
power consumption. CPU can make the real-time monitoring through IIC bus.
l Provides IPMC management control unit
The IPMC management control unit of each line interface board connects with each
other through bus to form an intelligent platform management system.
l Supports synchronous Ethernet and IEEE 1588v2
l Provides power management function
It realizes the electrical sequence control function of each working power through
power management chips.
Panel
The panel of H2XF8D is shown in Figure 4-8.
4-35
Interfaces
The optical module used by H2XF8D interface is hot-swap SFP+ optical module. The
port type is not identified on the panel. The corresponding relationships between interface
types and characteristics are described in Table 4-41.
Attribute Description
Indicator
There are 8 indicators on the front panel of H2XF8D board. Each interface corresponds
to one indicator. Functions of these indicators are described in Table 4-43.
4-36
Technical Parameters
The technical parameters of H2XF8D board are described in Table 4-44.
Parameter Description
Board power consumption The single board static power consumption is 71.0 w. The power
consumption is 80.9 w after normal starting without optical module.
Maxi- 4GB
mum ca-
pacity
Caution!
At present, H2XF8D board is only applicable for 8912E/8908E/8905E (For 8912E, it is only
applicable for the first four slots. ) and not applicable for 8902E.
4.3.5 S1XF12A
Function
S1XF12A board is a 12-port 10 gigabit optical interface board. It can realize 12-port 10
gigabit wire-speed access function. This board is applicable for all kinds of 8900E switches
and supports synchronous Ethernet.
The main functions of S1XF12A board are as follows:
l Provides powerful switching capacity
The 12-port 10 gigabit SFP+ optical interface board supports full wire-speed
forwarding.
l Provides gigabit out-of-band communication function
4-37
It is used for the communication between line card CPU and main control, for example,
the initialization information of CPU is downloaded.
l Provides EPLD online upgrade function
The EPLD of S1XF12A board can realize the online upgrade function through JTAG
interface simulation.
l Provides JTAG test function
The S1XF12A board can realize a single board JTAG test by connecting to the main
chip of a single board through the daisy chains.
l Provides intelligent detection function
The board designs real-time monitoring circuit such as temperature, voltage and
power consumption. CPU can make the real-time monitoring through IIC bus.
l Provides IPMC management control unit
The IPMC management control unit of each line interface board connects with each
other through bus to form an intelligent platform management system.
l Supports synchronous Ethernet and IEEE 1588v2
l Provides power management function
It realizes the electrical sequence control function of each working power through
power management chips.
Panel
The panel of S1XF12A is shown in Figure 4-9.
Interfaces
The optical module used by S1XF12A interface is hot-swap SFP+ optical module. The
port type is not identified on the panel. The corresponding relationships between interface
types and characteristics are described in Table 4-45.
4-38
Attribute Description
Indicator
There are 12 indicators on the front panel of S1XF12A board. Each interface corresponds
to one indicator. Functions of these indicators are described in Table 4-47.
Technical Parameters
The technical parameters of S1XF12A board are described in Table 4-48.
Parameter Description
4-39
Parameter Description
Board power consumption The single board static power consumption (only power on) is 51.3
w. The power consumption is 60.7 w after normal starting without
optical module.
Maxi- 4GB
mum ca-
pacity
4.3.6 E1GF24A
Function
E1GF24A board is a 24-port NP enhanced gigabit optical interface board. It provides
24-port gigabit wire-speed access function. This board is applicable for all kinds of 8900E
switches and supports MPLS gigabit optical interface wire-speed access, synchronous
Ethernet, IEEE 1588v2 and OAM function.
The main functions of E1GF24A board are as follows:
l Provides powerful switching capacity
The 24-port gigabit optical interface board supports full wire-speed forwarding. The
board inserting one NP daughter card can support MPLS wire-speed forwarding and
large-size entry.
l Provides gigabit out-of-band communication function
It is used for the communication between line card CPU and main control, for example,
the initialization information of CPU is downloaded.
l Provides EPLD online upgrade function
The EPLD of E1GF24A board can realize the online upgrade function through JTAG
interface simulation.
l Provides JTAG test function
The E1GF24A board can realize the single board JTAG test by connecting to the main
chip of a single board through the daisy chains.
l Provides intelligent detection function
The board designs real-time monitoring circuit such as temperature, voltage and
power consumption. CPU can make the real-time monitoring through IIC bus.
l Provides IPMC management control unit
The IPMC management control unit of each line interface board connects with each
other through bus to form an intelligent platform management system.
4-40
Panel
The panel of E1GF24A is shown in Figure 4-10.
Interfaces
The optical module used by E1GF24A interface is hot-swap SFP optical module. Any
optical port can support the distances that gigabit Ethernet generally supports. The
corresponding relationships between interface types and characteristics are described in
Table 4-49.
4-41
4-42
1.25G single fiber bi-direction SFP LC connector, single-mode optical fiber, with the wavelength
single-mode optical receive/transmit 1310 nm TX/1490 nm RX, the maximum transmission
module (SFP-S10K-D-S) distance is 10 km, digital diagnosis type
Transmission power range: –9 dBm–3 dBm, receiving
sensitivity: ≤–19.5 dBm, overload power –3 dBm
4-43
1.25G single fiber bi-direction SFP LC connector, single-mode optical fiber, with the wavelength
single-mode optical receive/transmit of 1310 nm TX/1490 nm RX, the maximum transmission
module (SFP-S40K-D-S) distance is 40 km, digital diagnosis type
Transmission power range: –3 dBm–3 dBm, receiving
sensitivity: ≤–19.5 dBm, overload power –3 dBm
155M SFP single fiber bi-direction LC connector, single-mode optical fiber, with the wavelength
receive/transmit optical module of 1310 nm TX/1550 nm RX, the maximum transmission
(SFP-S15K-D-S) distance is 15 km, digital diagnosis type
Transmission power range: –14 dBm– –8 dBm, receiving
sensitivity: ≤–31 dBm, overload power –8 dBm
155M SFP single fiber bi-direction LC connector, single-mode optical fiber, with the wavelength
receive/transmit optical module of 1310 nm TX/1550 nm RX, the maximum transmission
(SFP-S40K-D-S) distance is 40 km, digital diagnosis type
Transmission power range: –4 dBm–0 dBm, receiving
sensitivity: ≤–34 dBm, overload power –3 dBm
Attribute Description
Connector type LC
4-44
Attribute Description
Indicator
There are 24 indicators on the front panel of E1GF24A board. Each interface corresponds
to one indicator. Functions of these indicators are described in Table 4-51.
Technical Parameters
The technical parameters of E1GF24A board are described in Table 4-52.
Parameter Description
Board power consumption The single board static power consumption is 74.5 w. The power
consumption is 106.4 w after normal starting without optical module.
Maxi- 4GB
mum ca-
pacity
1. H2XF8D cannot be used for ZXR10 8902E, nor 5~12 slot of ZXR10 8912E.
2. The bandwidth of 5~12 slot in ZXR10 8912E to switch net is 64GBps, only half
wire-speed is available now. The cross board forwarding in 5~12 slot of S1XF12A for
ZXR10 8912E is converged.
3. The consumptions of H2XF8D and E1GF24A are the largest on ZXR10 8900E, since
they are almost 140W. Please pay attention to the power consumption and heat
dissipation.
4-45
The heat dissipation of the first and last slots are not that good as the others. Please
avoid the usage of H2XF8D and E1GF24A on the first and last slots, although it passed
the validation of heat simulation and environment test.
4-46
Indicator Description
A-1
Indicator Description
LINK (Green) On: 10/100/1000Base-T Ethernet interface link has been created.
Off: 10/100/1000Base-T Ethernet interface has no connections with
other interfaces.
Indicator Description
A-2
Indicator Description
LINK (Green) On: 10/100/1000Base-T Ethernet interface link has been created.
Off: 10/100/1000Base-T Ethernet interface has no connections with
other interfaces.
Indicator Description
A-3
Indicator Description
LINK (Green) On: 10/100/1000Base-T Ethernet interface link has been created.
Off: 10/100/1000Base-T Ethernet interface has no connections with
other interfaces.
Indicator Description
A-4
A-5
A-6
There are no indicators on the panel of ZXR10 8902E fan subrack. The fan state is
presented by the FAN indicator on the 8902E master MCS panel.
A-7
A-8
B-1
8912EMCS1D 3.7 kg The single board static The single board static
power consumption hot power is 158.09.
is 56.5 W. The power The hot power is
consumption is 84.8 W 237.27 after normal
after normal starting. starting. The full
The full wire-speed wire-speed hot power
power consumption is is 321.21.
114.8 W.
8908EMCS1D 3.7 kg The single board static The single board static
power consumption hot power is 158.087.
is 56.5 W. The power The hot power is
consumption is 84.8 W 237.27 after normal
after normal starting. starting. The full
The full wire-speed wire-speed hot power
power consumption is is 321.21.
114.8 W.
8905EMCS1D 3.7 kg The single board static The single board static
power consumption hot power is 158.087.
is 56.5 W. The power The hot power is
consumption is 84.8 W 237.27 after normal
after normal starting. starting. The full
The full wire-speed wire-speed hot power
power consumption is is 321.21.
114.8 W.
H2GF48D 3.3 kg The single board static The single board static
power consumption hot power is 112.48.
is 40.2 W. The power The hot power is
consumption is 51.7 144.66 after normal
W after normal starting starting. The full
without optical module. wire-speed hot power
The full wire-speed is 296.59.
power consumption is
106.0 W.
B-2
H2GF24D 3.2 kg The single board static The single board static
power consumption hot power is 112.48.
is 40.2 W. The power The hot power is
consumption is 51.7 144.66 after normal
W after normal starting starting. The full
without optical module. wire-speed hot power
The full wire-speed is 264.69.
power consumption is
94.6 W.
H2GT48D 3.3 kg The single board static The single board static
power consumption hot power is 138.50.
is 49.5 W. The power The hot power is
consumption is 58.5 163.68 after normal
W after normal starting starting. The full
without optical module. wire-speed hot power
The full wire-speed is 297.15.
power consumption is
106.2 W.
H2XF8D 3.6 kg The single board static The single board static
power consumption hot power is 198.66.
(only power on) is The hot power is
71.0 W. The power 226.36 after normal
consumption is 80.9 starting. The full
W after normal starting wire-speed hot power
without optical module. is 399.0.
The full wire-speed
power consumption is
142.9 W.
S1XF12A 3.0 kg The single board static The single board static
power consumption hot power is 143.54.
(only power on) is The hot power is
51.3 W. The power 169.84 after normal
consumption is 60.7 starting. The full
W after normal starting wire-speed hot power
without optical module. is 281.48.
The full wire-speed
power consumption is
100.6 W.
B-3
E1GF24A 3.8 kg The single board static The single board static
power consumption hot power is 149.222.
(only power on)is The hot power is
74.5 W. The power 191.91 after normal
consumption is 106.4 starting. The full
W after normal starting wire-speed hot power
without optical module. is 519.68.
The full wire-speed
power consumption is
140 W.
B-4
I
ZXR10 8900E Hardware Description
II
Tables
Table 3-1 Technical Features and Parameters ....................................................... 3-11
Table 3-2 System Configuration Data...................................................................... 3-12
Table 3-3 System Reliability of ZXR10 8900E ......................................................... 3-12
Table 3-4 Boards Supported by ZXR10 8900E System ........................................... 3-14
Table 3-5 Technical Parameters of ZXR10 8912E/8908E/8905E DC Module ........... 3-16
Table 3-6 Technical Parameters of ZXR10 8912E/8908E/8905E AC Power
Module................................................................................................... 3-17
Table 3-7 Technical Parameters of ZXR10 8902E DC Module................................. 3-18
Table 3-8 Technical Parameters of ZXR10 8902E AC Power Module ...................... 3-19
Table 3-9 ZXR10 8912E/8908E/8905E Indicators Description................................. 3-20
Table 3-10 Fan Subrack Parameters....................................................................... 3-21
Table 3-11 Fan Parameters..................................................................................... 3-21
Table 4-1 Boards Supported by ZXR10 8900E.......................................................... 4-1
Table 4-2 CONSOLE Cable Line Order ..................................................................... 4-3
Table 4-3 IPMC Cable Line Order ............................................................................. 4-3
Table 4-4 PPS&TOD OUT Interface Line Order Table ............................................... 4-4
Table 4-5 PPS&TOD IN Interface Line Order Table ................................................... 4-4
Table 4-6 Function Description of 8912EMCS1D Board Indicators ............................ 4-5
Table 4-7 Function Description of Buttons ................................................................. 4-5
Table 4-8 Technical Parameters of 8912EMCS1D..................................................... 4-6
Table 4-9 CONSOLE Cable Line Order ..................................................................... 4-8
Table 4-10 IPMC Cable Line Order ........................................................................... 4-8
Table 4-11 PPS&TOD OUT Interface Line Order Table ............................................. 4-9
Table 4-12 PPS&TOD IN Interface Line Order Table ................................................. 4-9
Table 4-13 Function Description of 8908EMCS1D Board Indicators ........................ 4-10
Table 4-14 Function Description of Buttons ............................................................. 4-10
Table 4-15 Technical Parameters of 8908EMCS1D................................................. 4-11
Table 4-16 CONSOLE Cable Line Order ................................................................. 4-13
Table 4-17 IPMC Cable Line Order ......................................................................... 4-13
Table 4-18 PPS&TOD OUT Interface Line Order Table ........................................... 4-14
Table 4-19 PPS&TOD IN Interface Line Order Table ............................................... 4-14
Table 4-20 Function Description of 8905EMCS1D Board Indicators ........................ 4-15
III
ZXR10 8900E Hardware Description
IV
Tables
V
Tables
DoS
- Denial of Service
ECMP
- Equal-Cost Muti-Path routing
ESRP
- Ethernet Standby Router Protocol
FRR
- Fast Reroute
GPS
- Global Positioning System
IEEE
- Institute of Electrical and Electronics Engineers
IGMP
- Internet Group Management Protocol
IS-IS
- Intermediate System-to-Intermediate System
ISSU
- In-Service Software Upgrade
VII
ZXR10 8900E Hardware Description
LACP
- Link Aggregation Control Protocol
LLDP
- Link Layer Discovery Protocol
MC-LAG
- Multi-Chassis Link Aggregation Group
MD5
- Message Digest 5 Algorithm
MSDP
- Multicast Source Discovery Protocol
MSTP
- Multiple Spanning Tree Protocol
NSF
- Non-Stop Forwarding
OSPF
- Open Shortest Path First
PIM-SM
- Protocol Independent Multicast - Sparse Mode
PPS
- Pulse Per Second
PVLAN
- Private Virtual Local Area Network
QoS
- Quality of Service
RADIUS
- Remote Authentication Dial In User Service
RIP
- Request In Progress
RIPng
- Routing Information Protocol next generation
RMON
- Remote Monitoring
RSTP
- Rapid Spanning Tree Protocol
SNMP
- Simple Network Management Protocol
SP
- Service Provider
VIII
Glossary
SSH
- Secure Shell
SSO
- Single Sign On
STP
- Spanning Tree Protocol
TELNET
- Telecommunication Network Protocol
UDLD
- UniDirectional Link Detection
VLAN
- Virtual Local Area Network
VRRP
- Virtual Router Redundancy Protocol
WRR
- Weighted Round Robin
ZESR
- ZTE Ethernet Switch Ring
ZESS
- ZTE Ethernet Smart Switch
IX