Académique Documents
Professionnel Documents
Culture Documents
Location 1
I. MECHANICAL PROPERTIES OF MATERIALS
1. Ferrous, Non- Tensile Strength IS 1608: 2005 (RA 2010) (140 to 1600) N/mm2
Ferrous, Rolled BS EN 10002-1-2001
Forged, Cast Yield stress (170 to 1200) N/mm2
Materials &
Fabricated 0.5 % Proof Stress (150 to 1000) N/mm2
Components.
0.2 % Proof Stress (140 to 1000) N/mm2
% Elongation 1 % to 75 %
% Reduction of area 2 % to 80 %
Location 1
2. Tubular Products Drift expansion test IS 2335: 2005 Qualitative
(Outside Diameter:
10 mm to 150 mm)
3. Fasteners Proof load test IS 1367 (Part 3): 2002 (RA 2007) 8 mm to 36 mm
(Bolt & Nut) IS 1367 (Part 6): 1994 (RA 2010)
4. Fasteners (Bolt) Axial Tensile test IS 1367 (Part 3): 2002 (RA 2007) 8 mm to 36 mm
Wedge Tensile test IS 1608: 2005 (RA 2010) 8 mm to 36 mm
-X-X-X-X-X-X-X-X-X-X-X-X-X-X-