Académique Documents
Professionnel Documents
Culture Documents
Reference Record
Sl No Description Responsibility
(Input) (Output)
1 Study Architectural drawings Arch. Drgs. DE / EC
2 Suggest modification of Architectural Drawing if required to Final Arch. Drgs. EC
suit the above DE / EC
3 Find out the various types of loads that are applied on IS: 875
the structures such as, (Part 1 to 4) DE
3.1 Dead Loads
3.1.1 Self weights (based on assumed dimensions, etc.)
3.1.2 Finishes
3.1.3 Partitions
3.2 Imposed Loads
3.2.1 Live load IS:875 Part-2
3.3 Wind Load IS:875 Part-3
3.4 Seismic Load IS:1893
3.5 Snow Loads IS:875 Part-4
3.6 Other loads like fire tender,chillers,parking, etc
3.7 Earth Pressure and Water table effects
4 Find out the various load combinations and load factors IS:456
for the strength / serviceability DE
5 Method of analysis (static / dynamic) DE
I) Manual (or computer)
ii) If computer, specify the package used
iii) Linear static
iv) Dynamic
6 Perform the analysis after ensuring the correctness of the Analysis Analysis Output DE
input data. Identify the design forces from the governing Packages
load case for the following elements after carrying out static Staad-22.3 /
checks. Staad-pro /
I) Foundation (footings & pile caps) ETABS 2000/
ii) Columns NISA(Civil)
iii) Beams and Slabs at various levels ROBOT (13.0) /
iv) Walls
Reference Record
Sl No Description Responsibility
(Input) (Output)
12.1 Check for availability of similar /same design /Drgs. in the Data bank Reference / Final SH / EC
databank or check for possibility of using the standard Design docs.Drgs.
design /Drgs. If any available
12.2 If completely new type of work is encountered discuss with New design Final detail ,input SH / EC
SH / Research institutes, etc and finalise the design concept methods to drgs.
and design accordingly.
STANDARD CODES INDICATED FOR REFERENCE SHALL BE CONSIDERED AS LATEST REVISION